A base class for any item which can be embedded within the BOARD container class, and therefore instances of derived classes should only be found in Pcbnew or other programs that use class BOARD and its contents. More...

#include <board_item.h>

Inheritance diagram for BOARD_ITEM:

Classes
struct	ptr_cmp

Public Types
enum	COMPARE_FLAGS : int { DRC = 0x01 }

Public Member Functions
	BOARD_ITEM (BOARD_ITEM *aParent, KICAD_T idtype, PCB_LAYER_ID aLayer=F_Cu)

	~BOARD_ITEM ()

void	SetParentGroup (PCB_GROUP *aGroup)

PCB_GROUP *	GetParentGroup () const

int	GetX () const

int	GetY () const

virtual VECTOR2I	GetCenter () const
	This defaults to the center of the bounding box if not overridden.

void	SetX (int aX)

void	SetY (int aY)

virtual bool	IsConnected () const
	Returns information if the object is derived from BOARD_CONNECTED_ITEM.

virtual double	Similarity (const BOARD_ITEM &aItem) const =0
	Return a measure of how likely the other object is to represent the same object.

virtual bool	operator== (const BOARD_ITEM &aItem) const =0

virtual bool	IsOnCopperLayer () const

virtual bool	HasHole () const

virtual bool	HasDrilledHole () const

virtual bool	IsTented (PCB_LAYER_ID aLayer) const
	Checks if the given object is tented (its copper shape is covered by solder mask) on a given side of the board.

virtual std::shared_ptr< SHAPE >	GetEffectiveShape (PCB_LAYER_ID aLayer=UNDEFINED_LAYER, FLASHING aFlash=FLASHING::DEFAULT) const
	Some pad shapes can be complex (rounded/chamfered rectangle), even without considering custom shapes.

virtual std::shared_ptr< SHAPE_SEGMENT >	GetEffectiveHoleShape () const

virtual void	RunOnChildren (const std::function< void(BOARD_ITEM *)> &aFunction) const
	Invoke a function on all children.

virtual void	RunOnDescendants (const std::function< void(BOARD_ITEM *)> &aFunction, int aDepth=0) const
	Invoke a function on all descendants.

BOARD_ITEM_CONTAINER *	GetParent () const

FOOTPRINT *	GetParentFootprint () const

VECTOR2I	GetFPRelativePosition () const

void	SetFPRelativePosition (const VECTOR2I &aPos)

virtual bool	HasLineStroke () const
	Check if this item has line stoke properties.

virtual STROKE_PARAMS	GetStroke () const

virtual void	SetStroke (const STROKE_PARAMS &aStroke)

const KIFONT::METRICS &	GetFontMetrics () const

virtual PCB_LAYER_ID	GetLayer () const
	Return the primary layer this item is on.

virtual int	BoardLayerCount () const
	Return the total number of layers for the board that this item resides on.

virtual int	BoardCopperLayerCount () const
	Return the total number of copper layers for the board that this item resides on.

virtual LSET	BoardLayerSet () const
	Return the LSET for the board that this item resides on.

virtual LSET	GetLayerSet () const
	Return a std::bitset of all layers on which the item physically resides.

virtual void	SetLayerSet (const LSET &aLayers)

bool	IsSideSpecific () const

virtual void	SetLayer (PCB_LAYER_ID aLayer)
	Set the layer this item is on.

virtual BOARD_ITEM *	Duplicate () const
	Create a copy of this BOARD_ITEM.

void	SwapItemData (BOARD_ITEM *aImage)
	Swap data between aItem and aImage.

virtual bool	IsOnLayer (PCB_LAYER_ID aLayer) const
	Test to see if this object is on the given layer.

virtual bool	IsKnockout () const

virtual void	SetIsKnockout (bool aKnockout)

virtual bool	IsLocked () const

virtual void	SetLocked (bool aLocked)

virtual void	StyleFromSettings (const BOARD_DESIGN_SETTINGS &settings)

void	DeleteStructure ()
	Delete this object after removing from its parent if it has one.

virtual void	Move (const VECTOR2I &aMoveVector)
	Move this object.

virtual void	Rotate (const VECTOR2I &aRotCentre, const EDA_ANGLE &aAngle)
	Rotate this object.

virtual void	Flip (const VECTOR2I &aCentre, FLIP_DIRECTION aFlipDirection)
	Flip this object, i.e.

virtual void	Mirror (const VECTOR2I &aCentre, FLIP_DIRECTION aFlipDirection)
	Mirror this object relative to a given horizontal axis the layer is not changed.

virtual void	Normalize ()
	Perform any normalization required after a user rotate and/or flip.

virtual void	NormalizeForCompare ()
	Perform any normalization required to compare 2 graphics, especially if the can be rotated and/or flipped.

virtual const BOARD *	GetBoard () const
	Return the BOARD in which this BOARD_ITEM resides, or NULL if none.

virtual BOARD *	GetBoard ()

wxString	GetParentAsString () const
	For "parent" property.

wxString	GetLayerName () const
	Return the name of the PCB layer on which the item resides.

virtual std::vector< int >	ViewGetLayers () const override
	Return the all the layers within the VIEW the object is painted on.

virtual void	TransformShapeToPolygon (SHAPE_POLY_SET &aBuffer, PCB_LAYER_ID aLayer, int aClearance, int aError, ERROR_LOC aErrorLoc, bool ignoreLineWidth=false) const
	Convert the item shape to a closed polygon.

KICAD_T	Type () const
	Returns the type of object.

virtual void	SetParent (EDA_ITEM *aParent)

bool	IsModified () const

bool	IsNew () const

bool	IsMoving () const

bool	IsSelected () const

bool	IsEntered () const

bool	IsBrightened () const

bool	IsRollover () const

void	SetSelected ()

void	SetBrightened ()

void	ClearSelected ()

void	ClearBrightened ()

void	SetModified ()

void	SetFlags (EDA_ITEM_FLAGS aMask)

void	XorFlags (EDA_ITEM_FLAGS aMask)

void	ClearFlags (EDA_ITEM_FLAGS aMask=EDA_ITEM_ALL_FLAGS)

EDA_ITEM_FLAGS	GetFlags () const

bool	HasFlag (EDA_ITEM_FLAGS aFlag) const

EDA_ITEM_FLAGS	GetEditFlags () const

virtual void	ClearEditFlags ()

EDA_ITEM_FLAGS	GetTempFlags () const

virtual void	ClearTempFlags ()

virtual bool	RenderAsBitmap (double aWorldScale) const

void	SetIsShownAsBitmap (bool aBitmap)

bool	IsShownAsBitmap () const

virtual bool	IsType (const std::vector< KICAD_T > &aScanTypes) const
	Check whether the item is one of the listed types.

void	SetForceVisible (bool aEnable)
	Set and clear force visible flag used to force the item to be drawn even if it's draw attribute is set to not visible.

bool	IsForceVisible () const

virtual void	GetMsgPanelInfo (EDA_DRAW_FRAME *aFrame, std::vector< MSG_PANEL_ITEM > &aList)
	Populate aList of MSG_PANEL_ITEM objects with it's internal state for display purposes.

virtual wxString	GetFriendlyName () const

virtual bool	HitTest (const VECTOR2I &aPosition, int aAccuracy=0) const
	Test if aPosition is inside or on the boundary of this item.

virtual bool	HitTest (const BOX2I &aRect, bool aContained, int aAccuracy=0) const
	Test if aRect intersects this item.

virtual const BOX2I	GetBoundingBox () const
	Return the orthogonal bounding box of this object for display purposes.

virtual VECTOR2I	GetPosition () const

virtual void	SetPosition (const VECTOR2I &aPos)

virtual const VECTOR2I	GetFocusPosition () const
	Similar to GetPosition, but allows items to return their visual center rather than their anchor.

virtual VECTOR2I	GetSortPosition () const
	Return the coordinates that should be used for sorting this element visually compared to other elements.

virtual EDA_ITEM *	Clone () const
	Create a duplicate of this item with linked list members set to NULL.

virtual INSPECT_RESULT	Visit (INSPECTOR inspector, void *testData, const std::vector< KICAD_T > &aScanTypes)
	May be re-implemented for each derived class in order to handle all the types given by its member data.

virtual wxString	GetClass () const =0
	Return the class name.

wxString	GetTypeDesc () const
	Return a translated description of the type for this EDA_ITEM for display in user facing messages.

virtual wxString	GetItemDescription (UNITS_PROVIDER *aUnitsProvider, bool aFull) const
	Return a user-visible description string of this item.

virtual BITMAPS	GetMenuImage () const
	Return a pointer to an image to be used in menus.

virtual bool	Matches (const EDA_SEARCH_DATA &aSearchData, void *aAuxData) const
	Compare the item against the search criteria in aSearchData.

virtual bool	Replace (const EDA_SEARCH_DATA &aSearchData, void *aAuxData=nullptr)
	Perform a text replace using the find and replace criteria in aSearchData on items that support text find and replace.

virtual bool	IsReplaceable () const
	Override this method in any derived object that supports test find and replace.

bool	operator< (const EDA_ITEM &aItem) const
	Test if another item is less than this object.

virtual const BOX2I	ViewBBox () const override
	Return the bounding box of the item covering all its layers.

virtual EMBEDDED_FILES *	GetEmbeddedFiles ()

bool	IsSCH_ITEM () const

bool	IsBOARD_ITEM () const

virtual void	ViewDraw (int aLayer, VIEW *aView) const
	Draw the parts of the object belonging to layer aLayer.

virtual double	ViewGetLOD (int aLayer, VIEW *aView) const
	Return the level of detail (LOD) of the item.

VIEW_ITEM_DATA *	viewPrivData () const

void	SetForcedTransparency (double aForcedTransparency)

double	GetForcedTransparency () const

bool	Set (PROPERTY_BASE *aProperty, wxAny &aValue, bool aNotify=true)

template<typename T >
bool	Set (PROPERTY_BASE *aProperty, T aValue, bool aNotify=true)

template<typename T >
bool	Set (const wxString &aProperty, T aValue, bool aNotify=true)

wxAny	Get (PROPERTY_BASE *aProperty) const

template<typename T >
T	Get (PROPERTY_BASE *aProperty) const

template<typename T >
std::optional< T >	Get (const wxString &aProperty) const

virtual void	Serialize (google::protobuf::Any &aContainer) const
	Serializes this object to the given Any message.

virtual bool	Deserialize (const google::protobuf::Any &aContainer)
	Deserializes the given protobuf message into this object.

Static Public Member Functions
template<class T >
static INSPECT_RESULT	IterateForward (std::deque< T > &aList, INSPECTOR inspector, void *testData, const std::vector< KICAD_T > &scanTypes)
	This changes first parameter to avoid the DList and use the main queue instead.

template<class T >
static INSPECT_RESULT	IterateForward (std::vector< T > &aList, INSPECTOR inspector, void *testData, const std::vector< KICAD_T > &scanTypes)
	Change first parameter to avoid the DList and use std::vector instead.

static bool	Replace (const EDA_SEARCH_DATA &aSearchData, wxString &aText)
	Perform a text replace on aText using the find and replace criteria in aSearchData on items that support text find and replace.

static bool	Sort (const EDA_ITEM aLeft, const EDA_ITEM aRight)
	Helper function to be used by the C++ STL sort algorithm for sorting a STL container of EDA_ITEM pointers.

Public Attributes
const KIID	m_Uuid

Static Public Attributes
static VECTOR2I	ZeroOffset
	A value of wxPoint(0,0) which can be passed to the Draw() functions.

Protected Member Functions
virtual wxString	layerMaskDescribe () const
	Return a string (to be shown to the user) describing a layer mask.

virtual void	swapData (BOARD_ITEM *aImage)

bool	Matches (const wxString &aText, const EDA_SEARCH_DATA &aSearchData) const
	Compare aText against search criteria in aSearchData.

Protected Attributes
PCB_LAYER_ID	m_layer

bool	m_isKnockout

bool	m_isLocked

PCB_GROUP *	m_group

EDA_ITEM_FLAGS	m_flags

EDA_ITEM *	m_parent
	Linked list: Link (parent struct)

bool	m_forceVisible

Private Attributes
KICAD_T	m_structType
	Run time identification, keep private so it can never be changed after a ctor sets it.

bool	m_isSCH_ITEM

bool	m_isBOARD_ITEM

VIEW_ITEM_DATA *	m_viewPrivData

double	m_forcedTransparency
	Additional transparency for diff'ing items.

Detailed Description

A base class for any item which can be embedded within the BOARD container class, and therefore instances of derived classes should only be found in Pcbnew or other programs that use class BOARD and its contents.

Definition at line 78 of file board_item.h.

Member Enumeration Documentation

◆ COMPARE_FLAGS

enum BOARD_ITEM::COMPARE_FLAGS : int

Enumerator
DRC

Definition at line 417 of file board_item.h.

Constructor & Destructor Documentation

◆ BOARD_ITEM()

BOARD_ITEM::BOARD_ITEM	(	BOARD_ITEM *	aParent,
		KICAD_T	idtype,
		PCB_LAYER_ID	aLayer = `F_Cu`
	)

inline

Definition at line 81 of file board_item.h.

◆ ~BOARD_ITEM()

BOARD_ITEM::~BOARD_ITEM ( )

Definition at line 41 of file board_item.cpp.

References m_group.

Member Function Documentation

◆ BoardCopperLayerCount()

int BOARD_ITEM::BoardCopperLayerCount ( ) const

virtual

Return the total number of copper layers for the board that this item resides on.

Definition at line 117 of file board_item.cpp.

References GetBoard(), and BOARD::GetCopperLayerCount().

Referenced by PAD::ClearZoneLayerOverrides(), PCB_VIA::ClearZoneLayerOverrides(), PAD::Flip(), PADSTACK::ForEachUniqueLayer(), PCB_VIA::GetLayerSet(), PAD::PAD(), PCB_VIA::PCB_VIA(), PADSTACK::RelevantShapeLayers(), PNS_KICAD_IFACE_BASE::syncPad(), and PADSTACK::UniqueLayers().

◆ BoardLayerCount()

int BOARD_ITEM::BoardLayerCount ( ) const

virtual

Return the total number of layers for the board that this item resides on.

Definition at line 106 of file board_item.cpp.

References GetBoard(), and GetLayerSet().

◆ BoardLayerSet()

LSET BOARD_ITEM::BoardLayerSet ( ) const

virtual

Return the LSET for the board that this item resides on.

Definition at line 128 of file board_item.cpp.

References LSET::AllLayersMask(), GetBoard(), and GetLayerSet().

Referenced by PADSTACK::EffectiveLayerFor().

◆ ClearBrightened()

void EDA_ITEM::ClearBrightened ( )

inlineinherited

Definition at line 123 of file eda_item.h.

References BRIGHTENED, and EDA_ITEM::ClearFlags().

Referenced by FOOTPRINT_DIFF_WIDGET::DisplayDiff(), SCH_EDIT_FRAME::FocusOnItem(), SYMBOL_EDIT_FRAME::FocusOnItem(), PCB_BASE_FRAME::FocusOnItems(), PL_SELECTION_TOOL::unhighlight(), EE_SELECTION_TOOL::unhighlight(), PCB_SELECTION_TOOL::unhighlightInternal(), PCB_TEST_SELECTION_TOOL::unhighlightInternal(), and SCH_EDITOR_CONTROL::UpdateNetHighlighting().

◆ ClearEditFlags()

virtual void EDA_ITEM::ClearEditFlags ( )

inlinevirtualinherited

Reimplemented in LIB_SYMBOL.

Definition at line 141 of file eda_item.h.

References EDA_ITEM::ClearFlags(), and EDA_ITEM::GetEditFlags().

Referenced by BOARD::Add(), FOOTPRINT::Add(), LIB_SYMBOL::ClearEditFlags(), SYMBOL_EDITOR_DRAWING_TOOLS::doDrawShape(), SCH_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawTable(), SCH_LINE_WIRE_BUS_TOOL::finishSegments(), PL_DRAWING_TOOLS::PlaceItem(), BOARD_COMMIT::Push(), SCH_EDIT_FRAME::PutDataInPreviousState(), BOARD_COMMIT::Revert(), SCH_ITEM::SwapFlags(), and SYMBOL_EDITOR_DRAWING_TOOLS::TwoClickPlace().

◆ ClearFlags()

void EDA_ITEM::ClearFlags ( EDA_ITEM_FLAGS aMask = EDA_ITEM_ALL_FLAGS )

inlineinherited

Definition at line 129 of file eda_item.h.

References EDA_ITEM::m_flags.

Referenced by FOOTPRINT_VIEWER_FRAME::AddFootprintToPCB(), PNS_KICAD_IFACE::AddItem(), PNS_KICAD_IFACE_GENERATOR::AddItem(), SCH_MOVE_TOOL::AlignToGrid(), SCH_EDIT_TOOL::BreakWire(), FOOTPRINT::BuildCourtyardCaches(), EDA_ITEM::ClearBrightened(), EDA_ITEM::ClearEditFlags(), EDA_ITEM::ClearSelected(), EDA_ITEM::ClearTempFlags(), ConnectBoardShapes(), SYMBOL_EDITOR_EDIT_TOOL::Copy(), MULTICHANNEL_TOOL::copyRuleAreaContents(), FOOTPRINT_EDITOR_CONTROL::CreateFootprint(), SYMBOL_EDITOR_PIN_TOOL::CreateImagePins(), MICROWAVE_TOOL::createMicrowaveInductor(), DIALOG_PAD_PROPERTIES::DIALOG_PAD_PROPERTIES(), PCB_TOOL_BASE::doInteractiveItemPlacement(), KIGFX::SCH_PAINTER::draw(), SCH_ITEM::Duplicate(), PCB_TUNING_PATTERN::EditPush(), PCB_TUNING_PATTERN::EditRevert(), PCB_EDIT_FRAME::ExchangeFootprint(), PCB_SELECTION_TOOL::ExitGroup(), SCH_IO_KICAD_SEXPR::Format(), SYMBOL_EDIT_FRAME::GetSymbolFromRedoList(), SYMBOL_EDIT_FRAME::GetSymbolFromUndoList(), EE_SELECTION_TOOL::GuessSelectionCandidates(), FOOTPRINT_EDITOR_CONTROL::ImportFootprint(), DRC_INTERACTIVE_COURTYARD_CLEARANCE::Init(), EE_COLLECTOR::Inspect(), FOOTPRINT_EDIT_FRAME::LoadFootprintFromBoard(), FOOTPRINT_EDIT_FRAME::LoadFootprintFromLibrary(), FOOTPRINT_EDITOR_CONTROL::NewFootprint(), DIALOG_SYMBOL_PROPERTIES::OnUnitChoice(), FOOTPRINT_EDIT_FRAME::OpenProjectFiles(), SCH_EASYEDAPRO_PARSER::ParseSchematic(), PCB_BASE_FRAME::PlaceFootprint(), SYMBOL_EDITOR_PIN_TOOL::PlacePin(), SCH_COMMIT::pushSchEdit(), PCB_BASE_EDIT_FRAME::PutDataInPreviousState(), PCB_SELECTION_TOOL::RebuildSelection(), PAD::Recombine(), GERBVIEW_FRAME::RemapLayers(), DRC_TEST_PROVIDER_DISALLOW::Run(), FOOTPRINT_EDIT_FRAME::SaveFootprintToBoard(), SCH_IO_KICAD_SEXPR_LIB_CACHE::savePin(), EE_SELECTION_TOOL::selectMultiple(), EDA_ITEM::SetIsShownAsBitmap(), DIALOG_SYMBOL_PROPERTIES::TransferDataFromWindow(), SCH_DRAWING_TOOLS::TwoClickPlace(), EE_SELECTION_TOOL::unhighlight(), and SCOPED_FLAGS_CLEANER::~SCOPED_FLAGS_CLEANER().

◆ ClearSelected()

void EDA_ITEM::ClearSelected ( )

inlineinherited

Definition at line 122 of file eda_item.h.

References EDA_ITEM::ClearFlags(), and SELECTED.

Referenced by PCB_POINT_EDITOR::addCorner(), FOOTPRINT_DIFF_WIDGET::DisplayDiff(), EDIT_TOOL::Duplicate(), LIB_SYMBOL::LIB_SYMBOL(), ARRAY_TOOL::onDialogClosed(), SCH_COMMIT::Revert(), EE_TOOL_BASE< T >::saveCopyInUndoList(), SCH_COMMIT::Stage(), PL_SELECTION_TOOL::unhighlight(), EE_SELECTION_TOOL::unhighlight(), PCB_SELECTION_TOOL::unhighlightInternal(), PCB_TEST_SELECTION_TOOL::unhighlightInternal(), and GERBVIEW_SELECTION_TOOL::unselectVisually().

◆ ClearTempFlags()

virtual void EDA_ITEM::ClearTempFlags ( )

inlinevirtualinherited

Reimplemented in LIB_SYMBOL.

Definition at line 153 of file eda_item.h.

References EDA_ITEM::ClearFlags(), and EDA_ITEM::GetTempFlags().

Referenced by LIB_SYMBOL::ClearTempFlags(), SCH_EDIT_FRAME::PutDataInPreviousState(), and SCH_ITEM::SwapFlags().

◆ Clone()

EDA_ITEM * EDA_ITEM::Clone ( ) const

virtualinherited

Create a duplicate of this item with linked list members set to NULL.

The default version will return NULL in release builds and likely crash the program. In debug builds, a warning message indicating the derived class has not implemented cloning. This really should be a pure virtual function. Due to the fact that there are so many objects derived from EDA_ITEM, the decision was made to return NULL until all the objects derived from EDA_ITEM implement cloning. Once that happens, this function should be made pure.

Returns: A clone of the item.

Reimplemented in SCH_BITMAP, SCH_BUS_WIRE_ENTRY, SCH_BUS_BUS_ENTRY, SCH_FIELD, SCH_JUNCTION, SCH_LABEL, SCH_DIRECTIVE_LABEL, SCH_GLOBALLABEL, SCH_HIERLABEL, SCH_LINE, SCH_MARKER, SCH_NO_CONNECT, SCH_PIN, SCH_RULE_AREA, SCH_SHAPE, SCH_SHEET, SCH_SHEET_PIN, SCH_SYMBOL, SCH_TABLE, SCH_TABLECELL, SCH_TEXT, SCH_TEXTBOX, KIGFX::ORIGIN_VIEWITEM, KIGFX::ANCHOR_DEBUG, KIGFX::SNAP_INDICATOR, FOOTPRINT, PCB_TUNING_PATTERN, NETINFO_ITEM, PAD, PCB_DIM_ALIGNED, PCB_DIM_ORTHOGONAL, PCB_DIM_RADIAL, PCB_DIM_LEADER, PCB_DIM_CENTER, PCB_FIELD, PCB_GROUP, PCB_MARKER, PCB_REFERENCE_IMAGE, PCB_SHAPE, PCB_TABLE, PCB_TABLECELL, PCB_TARGET, PCB_TEXT, PCB_TEXTBOX, PCB_TRACK, PCB_ARC, PCB_VIA, and ZONE.

Definition at line 85 of file eda_item.cpp.

References EDA_ITEM::GetClass().

Referenced by Duplicate(), SCH_ITEM::Duplicate(), LIB_SYMBOL::LIB_SYMBOL(), BOARD_COMMIT::MakeImage(), SCH_COMMIT::makeImage(), new_clone(), PCB_POINT_EDITOR::OnSelectionChange(), LIB_SYMBOL::operator=(), SCH_IO_LIB_CACHE::removeSymbol(), SCH_EDIT_FRAME::SaveCopyInUndoList(), CLIPBOARD_IO::SaveSelection(), SCH_DRAWING_TOOLS::SingleClickPlace(), SCH_DRAWING_TOOLS::TwoClickPlace(), and SYMBOL_EDITOR_DRAWING_TOOLS::TwoClickPlace().

◆ DeleteStructure()

void BOARD_ITEM::DeleteStructure ( )

Delete this object after removing from its parent if it has one.

Definition at line 209 of file board_item.cpp.

References GetParent(), and BOARD_ITEM_CONTAINER::Remove().

◆ Deserialize()

bool SERIALIZABLE::Deserialize ( const google::protobuf::Any & aContainer )

virtualinherited

Deserializes the given protobuf message into this object.

Parameters

aContainer is an Any which should have a concrete type matching this object

Returns: true if unpacking and deserialization succeeded

Reimplemented in SCH_LABEL, SCH_DIRECTIVE_LABEL, SCH_GLOBALLABEL, SCH_HIERLABEL, SCH_LINE, EDA_SHAPE, EDA_TEXT, BOARD_STACKUP, FOOTPRINT, PAD, PADSTACK, PCB_DIMENSION_BASE, PCB_DIM_ALIGNED, PCB_DIM_ORTHOGONAL, PCB_DIM_RADIAL, PCB_DIM_LEADER, PCB_DIM_CENTER, PCB_FIELD, PCB_SHAPE, PCB_TEXT, PCB_TEXTBOX, PCB_TRACK, PCB_ARC, PCB_VIA, and ZONE.

Definition at line 30 of file serializable.cpp.

◆ Duplicate()

BOARD_ITEM * BOARD_ITEM::Duplicate ( ) const

virtual

Create a copy of this BOARD_ITEM.

Reimplemented in FOOTPRINT.

Definition at line 243 of file board_item.cpp.

References PCB_GROUP::AddItem(), EDA_ITEM::Clone(), GetParentGroup(), and EDA_ITEM::m_Uuid.

Referenced by CADSTAR_PCB_ARCHIVE_LOADER::addAttribute(), PCB_POINT_EDITOR::addCorner(), PCB_GROUP::DeepDuplicate(), KIGFX::PCB_PAINTER::draw(), CADSTAR_PCB_ARCHIVE_LOADER::drawCadstarText(), FOOTPRINT::Duplicate(), EDIT_TOOL::Duplicate(), FOOTPRINT::DuplicateItem(), and ARRAY_TOOL::onDialogClosed().

◆ Flip()

void BOARD_ITEM::Flip	(	const VECTOR2I &	aCentre,
		FLIP_DIRECTION	aFlipDirection
	)

virtual

Flip this object, i.e.

change the board side for this object.

Parameters

aCentre	the rotation point.
aFlipDirection	the flip direction

Reimplemented in FOOTPRINT, PCB_TUNING_PATTERN, PCB_DIMENSION_BASE, PCB_GENERATOR, PCB_GROUP, PCB_MARKER, PCB_REFERENCE_IMAGE, PCB_SHAPE, PCB_TABLE, PCB_TARGET, PCB_TEXT, PCB_TEXTBOX, PCB_TRACK, PCB_ARC, PCB_VIA, ZONE, and PAD.

Definition at line 361 of file board_item.cpp.

References EDA_ITEM::GetClass().

Referenced by EDIT_TOOL::Flip().

◆ Get() [1/3]

template<typename T >

std::optional< T > INSPECTABLE::Get ( const wxString & aProperty ) const

inlineinherited

Definition at line 119 of file inspectable.h.

References PROPERTY_BASE::get(), PROPERTY_MANAGER::GetProperty(), PROPERTY_MANAGER::Instance(), PROPERTY_BASE::OwnerHash(), TYPE_HASH, and PROPERTY_MANAGER::TypeCast().

◆ Get() [2/3]

wxAny INSPECTABLE::Get ( PROPERTY_BASE * aProperty ) const

inlineinherited

Definition at line 99 of file inspectable.h.

References PROPERTY_BASE::getter(), PROPERTY_MANAGER::Instance(), PROPERTY_BASE::OwnerHash(), TYPE_HASH, and PROPERTY_MANAGER::TypeCast().

Referenced by BOOST_AUTO_TEST_CASE(), CLASS_D_DESC::CLASS_D_DESC(), PROPERTIES_PANEL::getItemValue(), PCBEXPR_VAR_REF::GetValue(), and SCHEMATIC::SCHEMATIC().

◆ Get() [3/3]

template<typename T >

T INSPECTABLE::Get ( PROPERTY_BASE * aProperty ) const

inlineinherited

Definition at line 107 of file inspectable.h.

References PROPERTY_BASE::get(), PROPERTY_MANAGER::Instance(), PROPERTY_BASE::OwnerHash(), TYPE_HASH, and PROPERTY_MANAGER::TypeCast().

◆ GetBoard() [1/2]

BOARD * BOARD_ITEM::GetBoard ( )

virtual

Definition at line 61 of file board_item.cpp.

References GetBoard(), GetParent(), PCB_T, and EDA_ITEM::Type().

◆ GetBoard() [2/2]

const BOARD * BOARD_ITEM::GetBoard ( ) const

virtual

Return the BOARD in which this BOARD_ITEM resides, or NULL if none.

Definition at line 47 of file board_item.cpp.

References GetBoard(), GetParent(), PCB_T, and EDA_ITEM::Type().

Referenced by CN_CONNECTIVITY_ALGO::Add(), BOARD_ADAPTER::addShape(), BOARD_ITEM_DESC::BOARD_ITEM_DESC(), BoardCopperLayerCount(), BoardLayerCount(), BoardLayerSet(), CN_CONNECTIVITY_ALGO::Build(), PAD::BuildEffectivePolygon(), PAD::buildEffectiveShape(), ZONE::BuildSmoothedPoly(), collidesWithArea(), PCB_TUNING_PATTERN::CreateNew(), BOARD_INSPECTION_TOOL::DiffFootprint(), PAD::doCheckPad(), KIGFX::PCB_PAINTER::draw(), KIGFX::PCB_PAINTER::Draw(), enclosedByAreaFunc(), existsOnLayerFunc(), ZONE_FILLER::Fill(), PCB_VIA::FlashLayer(), PAD::FlashLayer(), FOOTPRINT::Flip(), PCB_DIMENSION_BASE::Flip(), PCB_GENERATOR::Flip(), PCB_SHAPE::Flip(), PCB_TABLE::Flip(), PCB_TARGET::Flip(), PCB_TEXT::Flip(), PCB_TRACK::Flip(), PCB_ARC::Flip(), PCB_VIA::Flip(), ZONE::Flip(), FOOTPRINT::FootprintNeedsUpdate(), PCB_IO_KICAD_SEXPR::format(), fromToFunc(), GetBoard(), PCBEXPR_CONTEXT::GetBoard(), NETINFO_ITEM::GetBoundingBox(), ZONE::GetBoundingBox(), FOOTPRINT::GetBoundingBox(), FOOTPRINT::GetBoundingHull(), KIGFX::PCB_RENDER_SETTINGS::GetColor(), PCB_BASE_EDIT_FRAME::GetContextualTextVars(), BOARD_CONNECTED_ITEM::GetDisplayNetname(), PCB_VIA::GetDrillConstraint(), BOARD_CONNECTED_ITEM::GetEffectiveNetClass(), PCB_TEXT::GetEffectiveShape(), getFieldFunc(), ZONE::GetInteractingZones(), ZONE::GetItemDescription(), FOOTPRINT::GetLayerBoundingBox(), GetLayerName(), PCB_VIA::GetMinAnnulus(), PCB_TUNING_PATTERN::GetMsgPanelInfo(), NETINFO_ITEM::GetMsgPanelInfo(), PCB_TRACK::GetMsgPanelInfo(), ZONE::GetMsgPanelInfo(), PCB_TRACK::GetMsgPanelInfoBase_Common(), BOARD_CONNECTED_ITEM::GetNetnameMsg(), PCB_VIA::GetOutermostConnectedLayers(), BOARD_CONNECTED_ITEM::GetOwnClearance(), PAD::GetOwnClearance(), PCB_MARKER::GetSeverity(), PCB_TEXT::GetShownText(), PCB_TEXTBOX::GetShownText(), FOOTPRINT::GetSide(), PCB_SHAPE::GetSolderMaskExpansion(), PCB_TRACK::GetSolderMaskExpansion(), PCB_VIA::GetSolderMaskExpansion(), PAD::GetSolderMaskExpansion(), PAD::GetSolderPasteMargin(), BOARD::GetTrackLength(), PCB_TRACK::GetWidthConstraint(), PCB_VIA::GetWidthConstraint(), inDiffPairFunc(), ROUTER_TOOL::Init(), intersectsAreaFunc(), intersectsBackCourtyardFunc(), intersectsCourtyardFunc(), intersectsFrontCourtyardFunc(), IsLocked(), IsSideSpecific(), PCB_VIA::IsTented(), layerMaskDescribe(), PCB_VIA::layerMaskDescribe(), PAD::MergePrimitivesAsPolygon(), ZONE::Move(), DIALOG_TEXTBOX_PROPERTIES::onBorderChecked(), PCB_IO_EAGLE::packageWire(), padNeedsUpdate(), PCB_TUNING_PATTERN::recoverBaseline(), BOARD::ResolveDRCExclusions(), FOOTPRINT::ResolveTextVar(), PCB_SHAPE::SetIsProxyItem(), BOARD_CONNECTED_ITEM::SetNetCode(), PCB_DIMENSION_BASE::SetUnitsMode(), PCB_TUNING_PATTERN::ShowPropertiesDialog(), DRC_TEST_PROVIDER_SOLDER_MASK::testItemAgainstItems(), CONNECTIVITY_DATA::TestTrackEndpointDangling(), DIALOG_FOOTPRINT_PROPERTIES::TransferDataFromWindow(), DIALOG_FOOTPRINT_ASSOCIATIONS::TransferDataToWindow(), DIALOG_FOOTPRINT_PROPERTIES::TransferDataToWindow(), DIALOG_FOOTPRINT_PROPERTIES_FP_EDITOR::TransferDataToWindow(), ZONE::TransformSmoothedOutlineToPolygon(), BOARD::UpdateRatsnestExclusions(), FOOTPRINT::ViewBBox(), PAD::ViewBBox(), PCB_TRACK::ViewBBox(), PAD::ViewGetLayers(), PAD::ViewGetLOD(), PCB_REFERENCE_IMAGE::ViewGetLOD(), PCB_VIA::ViewGetLOD(), ZONE::ZONE(), FOOTPRINT::~FOOTPRINT(), and ZONE::~ZONE().

◆ GetBoundingBox()

const BOX2I EDA_ITEM::GetBoundingBox ( ) const

virtualinherited

Return the orthogonal bounding box of this object for display purposes.

This box should be an enclosing perimeter for visible components of this object, and the units should be in the pcb or schematic coordinate system. It is OK to overestimate the size by a few counts.

Reimplemented in LIB_SYMBOL, SCH_BITMAP, SCH_BUS_ENTRY_BASE, SCH_FIELD, SCH_JUNCTION, SCH_LABEL_BASE, SCH_LINE, SCH_MARKER, SCH_NO_CONNECT, SCH_PIN, SCH_SHAPE, SCH_SHEET, SCH_SYMBOL, SCH_TABLE, SCH_TEXT, GBR_LAYOUT, GERBER_DRAW_ITEM, DS_DRAW_ITEM_LINE, DS_DRAW_ITEM_POLYPOLYGONS, DS_DRAW_ITEM_RECT, DS_DRAW_ITEM_PAGE, DS_DRAW_ITEM_TEXT, DS_DRAW_ITEM_BITMAP, BOARD, FOOTPRINT, PCB_TUNING_PATTERN, NETINFO_ITEM, PAD, PCB_DIMENSION_BASE, PCB_DIM_CENTER, PCB_GENERATOR, PCB_GROUP, PCB_MARKER, PCB_REFERENCE_IMAGE, PCB_SHAPE, PCB_TABLE, PCB_TARGET, PCB_TEXT, PCB_TRACK, PCB_VIA, ZONE, and DS_DRAW_ITEM_BASE.

Definition at line 77 of file eda_item.cpp.

Referenced by CADSTAR_SCH_ARCHIVE_LOADER::applyTextSettings(), CN_ITEM::BBox(), SCH_EDIT_TOOL::ChangeTextType(), TEST_BOARD_ITEM_FIXTURE::CompareItems(), TEST_EE_ITEM_FIXTURE::CompareItems(), EE_RTREE::contains(), MULTICHANNEL_TOOL::copyRuleAreaContents(), BOARD_COMMIT::dirtyIntersectingZones(), KIGFX::SCH_PAINTER::draw(), KIGFX::PCB_PAINTER::Draw(), KIGFX::SCH_PAINTER::drawItemBoundingBox(), SCH_DRAWING_TOOLS::DrawSheet(), enclosedByAreaFunc(), PCB_SELECTION_TOOL::FindItem(), SCH_FIND_REPLACE_TOOL::FindNext(), GetBoundingBoxes(), GetCenter(), SCH_MOVE_TOOL::getConnectedDragItems(), SCH_MOVE_TOOL::getConnectedItems(), EE_SELECTION_TOOL::GuessSelectionCandidates(), PCB_SELECTION_TOOL::GuessSelectionCandidates(), API_HANDLER_PCB::handleGetBoundingBox(), PNS_KICAD_IFACE::HideItem(), EE_RTREE::insert(), intersectsAreaFunc(), SCH_SCREEN::MarkConnections(), SCH_EDIT_TOOL::Mirror(), SCH_EDIT_FRAME::onNetNavigatorSelection(), DRC_RTREE::QueryColliding(), EE_RTREE::remove(), SCH_EDIT_TOOL::Rotate(), DRC_TEST_PROVIDER_COPPER_CLEARANCE::testItemAgainstZone(), DRC_TEST_PROVIDER_PHYSICAL_CLEARANCE::testItemAgainstZones(), DRC_TEST_PROVIDER_COPPER_CLEARANCE::testKnockoutTextAgainstZone(), DRC_TEST_PROVIDER_SOLDER_MASK::testMaskBridges(), GERBVIEW_SELECTION::ViewBBox(), and EDA_ITEM::ViewBBox().

◆ GetCenter()

virtual VECTOR2I BOARD_ITEM::GetCenter ( ) const

inlinevirtual

This defaults to the center of the bounding box if not overridden.

Returns: center point of the item

Reimplemented in FOOTPRINT, PAD, PCB_MARKER, PCB_SHAPE, and PCB_ARC.

Definition at line 111 of file board_item.h.

References EDA_ITEM::GetBoundingBox(), and BOX2< Vec >::GetCenter().

Referenced by PCB_GRID_HELPER::computeAnchors(), and PCB_SELECTION_TOOL::FindItem().

◆ GetClass()

virtual wxString EDA_ITEM::GetClass ( ) const

pure virtualinherited

Return the class name.

Implemented in LIB_SYMBOL, SCH_BITMAP, SCH_BUS_WIRE_ENTRY, SCH_BUS_BUS_ENTRY, SCH_FIELD, SCH_ITEM, SCH_JUNCTION, SCH_LABEL, SCH_DIRECTIVE_LABEL, SCH_GLOBALLABEL, SCH_HIERLABEL, SCH_LINE, SCH_MARKER, SCH_NO_CONNECT, SCH_PIN, SCH_RULE_AREA, SCH_SCREEN, SCH_SHAPE, SCH_SHEET, DELETED_SHEET_ITEM, SCH_SHEET_PIN, SCH_SYMBOL, SCH_TABLE, SCH_TABLECELL, SCH_TEXT, SCH_TEXTBOX, SCHEMATIC, GBR_LAYOUT, GERBER_DRAW_ITEM, GERBER_FILE_IMAGE, BASE_SCREEN, DELETED_BOARD_ITEM, DS_DRAW_ITEM_LINE, DS_DRAW_ITEM_POLYPOLYGONS, DS_DRAW_ITEM_RECT, DS_DRAW_ITEM_PAGE, DS_DRAW_ITEM_TEXT, DS_DRAW_ITEM_BITMAP, DS_PROXY_UNDO_ITEM, DS_PROXY_VIEW_ITEM, KIGFX::ORIGIN_VIEWITEM, KIGFX::ANCHOR_DEBUG, KIGFX::PREVIEW::ARC_ASSISTANT, KIGFX::PREVIEW::BEZIER_ASSISTANT, KIGFX::CONSTRUCTION_GEOM, KIGFX::PREVIEW::RULER_ITEM, KIGFX::PREVIEW::SELECTION_AREA, KIGFX::PREVIEW::SIMPLE_OVERLAY_ITEM, KIGFX::SNAP_INDICATOR, KIGFX::PREVIEW::TWO_POINT_ASSISTANT, EDIT_POINTS, BOARD, FOOTPRINT, TUNING_STATUS_VIEW_ITEM, NETINFO_ITEM, PAD, PCB_DIM_ALIGNED, PCB_DIM_ORTHOGONAL, PCB_DIM_RADIAL, PCB_DIM_LEADER, PCB_DIM_CENTER, PCB_FIELD, PCB_GENERATOR, PCB_GROUP, PCB_MARKER, PCB_REFERENCE_IMAGE, PCB_SHAPE, PCB_TABLE, PCB_TABLECELL, PCB_TARGET, PCB_TEXT, PCB_TEXTBOX, PCB_TRACK, PCB_ARC, PCB_VIA, RATSNEST_VIEW_ITEM, ROUTER_PREVIEW_ITEM, ROUTER_STATUS_VIEW_ITEM, ZONE, MY_DRAWING, and SCH_LABEL_BASE.

Referenced by EDA_ITEM::Clone(), FOOTPRINT::DuplicateItem(), Flip(), PCB_IO_KICAD_SEXPR::Format(), CN_ITEM::GetAnchor(), GetEffectiveHoleShape(), GetEffectiveShape(), EDA_ITEM::GetItemDescription(), GetStroke(), Mirror(), Move(), FOOTPRINT_EDIT_FRAME::OnEditItemRequest(), EDA_ITEM::operator<(), PCB_REFERENCE_IMAGE::operator=(), SCH_EDIT_TOOL::Properties(), BOARD_COMMIT::Push(), BOARD::Remove(), BOARD_COMMIT::Revert(), Rotate(), SetStroke(), PCB_REFERENCE_IMAGE::swapData(), and EDA_ITEM::Visit().

◆ GetEditFlags()

EDA_ITEM_FLAGS EDA_ITEM::GetEditFlags ( ) const

inlineinherited

Definition at line 133 of file eda_item.h.

References IS_BROKEN, IS_CHANGED, IS_MOVING, IS_NEW, IS_PASTED, EDA_ITEM::m_flags, and STRUCT_DELETED.

◆ GetEffectiveHoleShape()

std::shared_ptr< SHAPE_SEGMENT > BOARD_ITEM::GetEffectiveHoleShape ( ) const

virtual

Reimplemented in PAD, and PCB_VIA.

Definition at line 288 of file board_item.cpp.

References EDA_ITEM::GetClass(), and UNIMPLEMENTED_FOR.

Referenced by collidesWithArea(), DRAWING_TOOL::DrawVia(), DRC_RTREE::Insert(), DRC_TEST_PROVIDER_EDGE_CLEARANCE::testAgainstEdge(), DRC_TEST_PROVIDER_PHYSICAL_CLEARANCE::testItemAgainstItem(), DRC_TEST_PROVIDER_COPPER_CLEARANCE::testItemAgainstZone(), DRC_TEST_PROVIDER_PHYSICAL_CLEARANCE::testItemAgainstZones(), and PCB_CONTROL::UpdateMessagePanel().

◆ GetEffectiveShape()

std::shared_ptr< SHAPE > BOARD_ITEM::GetEffectiveShape	(	PCB_LAYER_ID	aLayer = `UNDEFINED_LAYER`,
		FLASHING	aFlash = `FLASHING::DEFAULT`
	)		const

virtual

Some pad shapes can be complex (rounded/chamfered rectangle), even without considering custom shapes.

This routine returns a COMPOUND shape (set of simple shapes which make up the pad for use with routing, collision determination, etc).

Note: This list can contain a SHAPE_SIMPLE (a simple single-outline non-intersecting polygon), but should never contain a SHAPE_POLY_SET (a complex polygon consisting of multiple outlines and/or holes).

Parameters

aLayer	in case of items spanning multiple layers, only the shapes belonging to aLayer will be returned. Pass UNDEFINED_LAYER to return shapes for all layers.
aFlash	optional parameter allowing a caller to force the pad to be flashed (or not flashed) on the current layer (default is to honour the pad's setting and the current connections for the given layer).

Reimplemented in PCB_DIMENSION_BASE, PCB_MARKER, PCB_TARGET, PAD, FOOTPRINT, PCB_GROUP, PCB_REFERENCE_IMAGE, PCB_SHAPE, PCB_TABLE, PCB_TEXT, PCB_TEXTBOX, PCB_TRACK, PCB_ARC, PCB_VIA, and ZONE.

Definition at line 278 of file board_item.cpp.

References EDA_ITEM::GetClass(), and UNIMPLEMENTED_FOR.

◆ GetEmbeddedFiles()

virtual EMBEDDED_FILES * EDA_ITEM::GetEmbeddedFiles ( )

inlinevirtualinherited

Reimplemented in LIB_SYMBOL, SCHEMATIC, BOARD, and FOOTPRINT.

Definition at line 444 of file eda_item.h.

Referenced by PCB_IO_KICAD_SEXPR_PARSER::Parse().

◆ GetFlags()

EDA_ITEM_FLAGS EDA_ITEM::GetFlags ( ) const

inlineinherited

Definition at line 130 of file eda_item.h.

References EDA_ITEM::m_flags.

Referenced by BACK_ANNOTATE::applyChangelist(), BuildBoardPolygonOutlines(), collidesWithArea(), SCH_TABLE::DeleteMarkedCells(), PCB_TABLE::DeleteMarkedCells(), doConvertOutlineToPolygon(), PL_EDIT_TOOL::DoDelete(), PCB_TOOL_BASE::doInteractiveItemPlacement(), KIGFX::SCH_PAINTER::draw(), PCB_TUNING_PATTERN::EditPush(), PCB_TUNING_PATTERN::EditRevert(), enclosedByAreaFunc(), DRC_ENGINE::EvalRules(), PCB_SELECTION_TOOL::FilterCollectorForHierarchy(), intersectsAreaFunc(), intersectsBackCourtyardFunc(), intersectsCourtyardFunc(), intersectsFrontCourtyardFunc(), LIB_SYMBOL::LIB_SYMBOL(), EE_SELECTION_TOOL::Main(), BOARD_INSPECTION_TOOL::makeDRCEngine(), CONVERT_TOOL::makePolysFromChainedSegs(), DIALOG_DRC::OnDRCItemSelected(), DIALOG_FOOTPRINT_CHECKER::OnSelectItem(), DIALOG_SYMBOL_PROPERTIES::OnUnitChoice(), LIB_SYMBOL::operator=(), BOARD_COMMIT::Push(), PAD::Recombine(), BOARD::Remove(), FOOTPRINT::Remove(), SCH_EDIT_FRAME::SaveCopyInUndoList(), SCH_IO_KICAD_SEXPR::saveTable(), DS_DATA_ITEM::SyncDrawItems(), DS_DATA_ITEM_POLYGONS::SyncDrawItems(), DS_DATA_ITEM_BITMAP::SyncDrawItems(), CONNECTIVITY_DATA::TestTrackEndpointDangling(), DIALOG_SYMBOL_PROPERTIES::TransferDataFromWindow(), and PCB_TUNING_PATTERN::Update().

◆ GetFocusPosition()

virtual const VECTOR2I EDA_ITEM::GetFocusPosition ( ) const

inlinevirtualinherited

Similar to GetPosition, but allows items to return their visual center rather than their anchor.

Reimplemented in BOARD, PCB_SHAPE, PCB_TRACK, and PCB_ARC.

Definition at line 250 of file eda_item.h.

References EDA_ITEM::GetPosition().

Referenced by SCH_EDIT_FRAME::FocusOnItem(), SYMBOL_EDIT_FRAME::FocusOnItem(), and DRAWING_TOOL::PlaceTuningPattern().

◆ GetFontMetrics()

const KIFONT::METRICS & BOARD_ITEM::GetFontMetrics ( ) const

Definition at line 100 of file board_item.cpp.

References KIFONT::METRICS::Default().

Referenced by BOARD_ADAPTER::addText(), KIGFX::PCB_PAINTER::draw(), PCB_TEXT::getFontMetrics(), PCB_TEXTBOX::getFontMetrics(), BRDITEMS_PLOTTER::PlotBoardGraphicItem(), BRDITEMS_PLOTTER::PlotDimension(), BRDITEMS_PLOTTER::PlotFootprintGraphicItems(), BRDITEMS_PLOTTER::PlotFootprintTextItems(), PCB_TEXT::TransformTextToPolySet(), and PCB_TEXTBOX::TransformTextToPolySet().

◆ GetForcedTransparency()

double KIGFX::VIEW_ITEM::GetForcedTransparency ( ) const

inlineinherited

Definition at line 158 of file view_item.h.

Referenced by KIGFX::SCH_PAINTER::draw(), EDA_ITEM::EDA_ITEM(), KIGFX::PCB_RENDER_SETTINGS::GetColor(), and EDA_ITEM::operator=().

◆ GetFPRelativePosition()

VECTOR2I BOARD_ITEM::GetFPRelativePosition ( ) const

Definition at line 327 of file board_item.cpp.

References GetParentFootprint(), EDA_ITEM::GetPosition(), and RotatePoint().

Referenced by PCB_IO_IPC2581::addLocationNode(), EDA_DATA::PACKAGE::AddPin(), PCB_IO_KICAD_SEXPR::format(), getMatchingTextItem(), PCB_FIELDS_GRID_TABLE::GetValue(), DIALOG_PAD_PROPERTIES::initValues(), FOOTPRINT::cmp_pads::operator()(), padNeedsUpdate(), processTextItem(), and PCB_FIELDS_GRID_TABLE::SetValue().

◆ GetFriendlyName()

wxString EDA_ITEM::GetFriendlyName ( ) const

virtualinherited

Reimplemented in SCH_FIELD, SCH_LINE, SCH_PIN, SCH_RULE_AREA, SCH_TEXT, PCB_TUNING_PATTERN, PCB_SHAPE, PCB_TABLECELL, PCB_TEXTBOX, PCB_TRACK, and ZONE.

Definition at line 332 of file eda_item.cpp.

References EDA_ITEM::GetTypeDesc().

Referenced by API_HANDLER_PCB::createItemForType(), API_HANDLER_SCH::createItemForType(), DIALOG_SHAPE_PROPERTIES::DIALOG_SHAPE_PROPERTIES(), SYMBOL_EDITOR_DRAWING_TOOLS::doDrawShape(), SCH_DRAWING_TOOLS::DrawShape(), SCH_ITEM::getSymbolEditorMsgPanelInfo(), PROPERTIES_PANEL::rebuildProperties(), and DIALOG_SHAPE_PROPERTIES::TransferDataFromWindow().

◆ GetItemDescription()

wxString EDA_ITEM::GetItemDescription	(	UNITS_PROVIDER *	aUnitsProvider,
		bool	aFull
	)		const

virtualinherited

Return a user-visible description string of this item.

This description is used in disambiguation menus, the message panel, ERC/DRC reports, etc.

The default version of this function raises an assertion in the debug mode and returns a string to indicate that it was not overridden to provide the object specific text.

Parameters

aLong indicates a long string is acceptable

Returns: The menu text string.

Reimplemented in SCH_BITMAP, SCH_BUS_WIRE_ENTRY, SCH_BUS_BUS_ENTRY, SCH_FIELD, SCH_JUNCTION, SCH_LABEL, SCH_DIRECTIVE_LABEL, SCH_GLOBALLABEL, SCH_HIERLABEL, SCH_LINE, SCH_MARKER, SCH_NO_CONNECT, SCH_PIN, SCH_RULE_AREA, SCH_SHAPE, SCH_SHEET, DELETED_SHEET_ITEM, SCH_SHEET_PIN, SCH_SYMBOL, SCH_TABLE, SCH_TABLECELL, SCH_TEXT, SCH_TEXTBOX, GERBER_DRAW_ITEM, DELETED_BOARD_ITEM, DS_DRAW_ITEM_LINE, DS_DRAW_ITEM_POLYPOLYGONS, DS_DRAW_ITEM_RECT, DS_DRAW_ITEM_PAGE, DS_DRAW_ITEM_TEXT, DS_DRAW_ITEM_BITMAP, BOARD, FOOTPRINT, PCB_TUNING_PATTERN, PAD, PCB_DIMENSION_BASE, PCB_FIELD, PCB_GENERATOR, PCB_GROUP, PCB_MARKER, PCB_REFERENCE_IMAGE, PCB_SHAPE, PCB_TABLE, PCB_TABLECELL, PCB_TARGET, PCB_TEXT, PCB_TEXTBOX, PCB_TRACK, PCB_VIA, and ZONE.

Definition at line 111 of file eda_item.cpp.

References EDA_ITEM::GetClass().

Referenced by CONNECTION_GRAPH::collectAllDriverValues(), DIALOG_GROUP_PROPERTIES::DoAddMember(), SELECTION_TOOL::doSelectionMenu(), DRC_ENGINE::EvalRules(), BOARD_INSPECTION_TOOL::getItemDescription(), RC_ITEM::GetJsonViolation(), SCH_MARKER::GetMsgPanelInfo(), PCB_MARKER::GetMsgPanelInfo(), ERC_TREE_MODEL::GetValue(), RC_TREE_MODEL::GetValue(), PNS::SHOVE::shoveIteration(), RC_ITEM::ShowReport(), DIALOG_POSITION_RELATIVE::updateAnchorInfo(), and PCB_CONTROL::UpdateMessagePanel().

◆ GetLayer()

virtual PCB_LAYER_ID BOARD_ITEM::GetLayer ( ) const

inlinevirtual

Return the primary layer this item is on.

Reimplemented in FOOTPRINT, PAD, PCB_SHAPE, PCB_VIA, and ZONE.

Definition at line 237 of file board_item.h.

References m_layer.

Referenced by CN_CONNECTIVITY_ALGO::Add(), BOARD::Add(), CN_LIST::Add(), PCB_TABLE::AddCell(), BOARD_ADAPTER::addFootprintShapes(), TEARDROP_MANAGER::areItemsInSameZone(), BOARD_CONNECTED_ITEM_DESC::BOARD_CONNECTED_ITEM_DESC(), BOARD_ITEM_DESC::BOARD_ITEM_DESC(), EXPORTER_STEP::buildGraphic3DShape(), EXPORTER_STEP::buildTrack3DShape(), PNS::ITEM::collideSimple(), TEARDROP_MANAGER::computeTeardropPolygon(), PCB_TUNING_PATTERN::CreateNew(), PCB_BASE_FRAME::CreateNewFootprint(), TEARDROP_MANAGER::createTeardrop(), BOARD_ADAPTER::createTrackWithMargin(), DIALOG_DIMENSION_PROPERTIES::DIALOG_DIMENSION_PROPERTIES(), DIALOG_REFERENCE_IMAGE_PROPERTIES::DIALOG_REFERENCE_IMAGE_PROPERTIES(), DIALOG_TEXT_PROPERTIES::DIALOG_TEXT_PROPERTIES(), DIALOG_TRACK_VIA_PROPERTIES::DIALOG_TRACK_VIA_PROPERTIES(), EDIT_TOOL::DragArcTrack(), KIGFX::PCB_PAINTER::draw(), DRAWING_TOOL::DrawTable(), DRAWING_TOOL::DrawVia(), PCB_TUNING_PATTERN::EditStart(), extractDiffPairCoupledItems(), EDIT_TOOL::FilletTracks(), TEARDROP_MANAGER::findAnchorPointsOnTrack(), TEARDROP_MANAGER::findTouchingTrack(), PCB_DIMENSION_BASE::Flip(), PCB_GENERATOR::Flip(), PCB_TABLE::Flip(), PCB_TARGET::Flip(), PCB_TEXT::Flip(), PCB_TRACK::Flip(), PCB_ARC::Flip(), PCB_IO_KICAD_SEXPR::format(), FOOTPRINT::GetBoundingBox(), FOOTPRINT::GetLayer(), PAD::GetLayer(), PCB_GENERATOR::GetLayerSet(), getMatchingTextItem(), PCB_TRACK::GetMsgPanelInfo(), BOARD::GetPad(), PCB_FIELDS_GRID_TABLE::GetValueAsLong(), PCB_SELECTION_TOOL::GuessSelectionCandidates(), PCB_TABLE::InsertCell(), GENERAL_COLLECTOR::Inspect(), BOARD_INSPECTION_TOOL::InspectClearance(), BOARD_INSPECTION_TOOL::InspectConstraints(), BOARD_INSPECTION_TOOL::InspectDRCError(), IsOnCopperLayer(), itemIsIncludedByFilter(), CADSTAR_PCB_ARCHIVE_LOADER::makeTracksFromShapes(), DIALOG_FOOTPRINT_PROPERTIES_FP_EDITOR::OnAddField(), BOARD::cmp_items::operator()(), BOARD::cmp_drawings::operator()(), PCB_SHAPE::cmp_drawings::operator()(), FOOTPRINT::cmp_drawings::operator()(), PCB_TRACK::cmp_tracks::operator()(), PCB_REFERENCE_IMAGE_DESC::PCB_REFERENCE_IMAGE_DESC(), PCB_TABLECELL::PCB_TABLECELL(), DRAWING_TOOL::PlaceImportedGraphics(), DRAWING_TOOL::PlaceTuningPattern(), BRDITEMS_PLOTTER::PlotDimension(), BRDITEMS_PLOTTER::PlotFootprintTextItems(), BRDITEMS_PLOTTER::PlotPcbTarget(), BRDITEMS_PLOTTER::PlotTableBorders(), DRC_ENGINE::ProcessAssertions(), DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS::processItem(), OUTSET_ROUTINE::ProcessItem(), processTextItem(), PCB_TUNING_PATTERN::Remove(), test::DRC_TEST_PROVIDER_DIFF_PAIR_COUPLING::Run(), DRC_TEST_PROVIDER_TEXT_DIMS::Run(), DRC_TEST_PROVIDER_TEXT_MIRRORING::Run(), CLIPBOARD_IO::SaveSelection(), PCB_SELECTION_TOOL::Selectable(), PCB_DIMENSION_BASE::Serialize(), PCB_TEXT::Serialize(), PCB_TRACK::Serialize(), PCB_ARC::Serialize(), PCB_FIELDS_GRID_TABLE::SetValueAsLong(), PCB_TUNING_PATTERN::ShowPropertiesDialog(), PCB_TARGET::Similarity(), PCB_TEXT::StyleFromSettings(), EDIT_TOOL::Swap(), PNS_KICAD_IFACE_BASE::syncArc(), PNS_KICAD_IFACE_BASE::syncTextItem(), PNS_KICAD_IFACE_BASE::syncTrack(), PNS_KICAD_IFACE_BASE::SyncWorld(), DRC_TEST_PROVIDER_COPPER_CLEARANCE::testKnockoutTextAgainstZone(), DRC_TEST_PROVIDER_MISC::testTextVars(), CONNECTIVITY_DATA::TestTrackEndpointDangling(), DIALOG_DIMENSION_PROPERTIES::TransferDataToWindow(), DIALOG_GLOBAL_EDIT_TEARDROPS::TransferDataToWindow(), DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS::TransferDataToWindow(), DIALOG_REFERENCE_IMAGE_PROPERTIES::TransferDataToWindow(), PCB_TUNING_PATTERN::Update(), PCB_CONTROL::UpdateMessagePanel(), PCB_TUNING_PATTERN::ViewGetLayers(), PCB_TEXT::ViewGetLayers(), PCB_TRACK::ViewGetLayers(), PCB_TEXT::ViewGetLOD(), DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS::visitItem(), DIALOG_GLOBAL_EDIT_TEARDROPS::visitItem(), and DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS::visitItem().

◆ GetLayerName()

wxString BOARD_ITEM::GetLayerName ( ) const

Return the name of the PCB layer on which the item resides.

Returns: the layer name associated with this item.

Definition at line 139 of file board_item.cpp.

References GetBoard(), BOARD::GetStandardLayerName(), and m_layer.

◆ GetLayerSet()

virtual LSET BOARD_ITEM::GetLayerSet ( ) const

inlinevirtual

Return a std::bitset of all layers on which the item physically resides.

Reimplemented in PAD, PCB_GENERATOR, PCB_GROUP, PCB_SHAPE, PCB_TRACK, PCB_VIA, and ZONE.

Definition at line 257 of file board_item.h.

References m_layer, and UNDEFINED_LAYER.

Referenced by SCOPED_LAYERSET::Add(), PCB_GRID_HELPER::BestSnapAnchor(), BoardLayerCount(), BoardLayerSet(), collidesWithArea(), PCB_GRID_HELPER::computeAnchors(), BOARD_COMMIT::dirtyIntersectingZones(), APPEARANCE_CONTROLS::doApplyLayerPreset(), DIALOG_GLOBAL_DELETION::DoGlobalDeletions(), KIGFX::PCB_PAINTER::Draw(), DRAWING_TOOL::DrawVia(), DRC_ENGINE::EvalRules(), existsOnLayerFunc(), KIGFX::PCB_RENDER_SETTINGS::GetColor(), hash_board_item(), BOARD_INSPECTION_TOOL::InspectClearance(), intersectsAreaFunc(), PNS_KICAD_IFACE::IsItemVisible(), isMaskAperture(), IsSideSpecific(), layerMaskDescribe(), FABMASTER::loadZone(), PCB_POINT_EDITOR::OnSelectionChange(), DIALOG_CLEANUP_GRAPHICS::OnSelectItem(), DIALOG_FOOTPRINT_CHECKER::OnSelectItem(), CN_VISITOR::operator()(), BOARD_ITEM::ptr_cmp::operator()(), KI_TEST::kitest_cmp_drawings::operator()(), DRC_ENGINE::ProcessAssertions(), EDIT_TOOL::Properties(), PCB_SELECTION_TOOL::pruneObscuredSelectionCandidates(), DRC_TEST_PROVIDER_PHYSICAL_CLEARANCE::Run(), PCB_SELECTION_CONDITIONS::sameLayerFunc(), SCOPED_LAYERSET::SCOPED_LAYERSET(), GLOBAL_EDIT_TOOL::swapBoardItem(), DRC_TEST_PROVIDER_PHYSICAL_CLEARANCE::testItemAgainstItem(), DRC_TEST_PROVIDER_COPPER_CLEARANCE::testItemAgainstZone(), DRC_TEST_PROVIDER_PHYSICAL_CLEARANCE::testItemAgainstZones(), PANEL_SETUP_LAYERS::TransferDataFromWindow(), and PCB_CONTROL::UpdateMessagePanel().

◆ GetMenuImage()

BITMAPS EDA_ITEM::GetMenuImage ( ) const

virtualinherited

Return a pointer to an image to be used in menus.

The default version returns the right arrow image. Override this function to provide object specific menu images.

Returns: The menu image associated with the item.

Reimplemented in SCH_BITMAP, SCH_BUS_WIRE_ENTRY, SCH_BUS_BUS_ENTRY, SCH_FIELD, SCH_JUNCTION, SCH_LABEL, SCH_GLOBALLABEL, SCH_HIERLABEL, SCH_LINE, SCH_MARKER, SCH_NO_CONNECT, SCH_PIN, SCH_SHAPE, SCH_SHEET, SCH_SHEET_PIN, SCH_SYMBOL, SCH_TABLE, SCH_TEXT, SCH_TEXTBOX, GERBER_DRAW_ITEM, FOOTPRINT, PCB_TUNING_PATTERN, PAD, PCB_DIM_ALIGNED, PCB_DIM_ORTHOGONAL, PCB_DIM_RADIAL, PCB_DIM_LEADER, PCB_DIM_CENTER, PCB_GROUP, PCB_MARKER, PCB_REFERENCE_IMAGE, PCB_SHAPE, PCB_TABLE, PCB_TARGET, PCB_TEXT, PCB_TEXTBOX, PCB_TRACK, PCB_VIA, and ZONE.

Definition at line 291 of file eda_item.cpp.

Referenced by SELECTION_TOOL::doSelectionMenu().

◆ GetMsgPanelInfo()

virtual void EDA_ITEM::GetMsgPanelInfo	(	EDA_DRAW_FRAME *	aFrame,
		std::vector< MSG_PANEL_ITEM > &	aList
	)

inlinevirtualinherited

Populate aList of MSG_PANEL_ITEM objects with it's internal state for display purposes.

Parameters

aFrame	is the EDA_DRAW_FRAME that displays the message panel
aList	is the list to populate.

Reimplemented in SCH_BITMAP, SCH_BUS_ENTRY_BASE, SCH_FIELD, SCH_JUNCTION, SCH_LABEL_BASE, SCH_LINE, SCH_MARKER, SCH_PIN, SCH_RULE_AREA, SCH_SHAPE, SCH_SHEET, SCH_SYMBOL, SCH_TABLE, SCH_TABLECELL, SCH_TEXT, SCH_TEXTBOX, GERBER_DRAW_ITEM, DS_DRAW_ITEM_BASE, BOARD, FOOTPRINT, PCB_TUNING_PATTERN, NETINFO_ITEM, PAD, PCB_DIMENSION_BASE, PCB_DIM_ALIGNED, PCB_DIM_LEADER, PCB_GROUP, PCB_MARKER, PCB_REFERENCE_IMAGE, PCB_SHAPE, PCB_TABLE, PCB_TABLECELL, PCB_TARGET, PCB_TEXT, PCB_TEXTBOX, PCB_TRACK, PCB_VIA, and ZONE.

Definition at line 203 of file eda_item.h.

Referenced by SCH_SHAPE::GetMsgPanelInfo(), EDA_DRAW_FRAME::SetMsgPanel(), EE_INSPECTION_TOOL::UpdateMessagePanel(), GERBVIEW_CONTROL::UpdateMessagePanel(), PL_EDITOR_CONTROL::UpdateMessagePanel(), PCB_CONTROL::UpdateMessagePanel(), and FOOTPRINT_WIZARD_FRAME::UpdateMsgPanel().

◆ GetParent()

BOARD_ITEM_CONTAINER * BOARD_ITEM::GetParent ( ) const

inline

Definition at line 215 of file board_item.h.

References EDA_ITEM::m_parent.

Referenced by ALIGN_DISTRIBUTE_TOOL::AlignBottom(), ALIGN_DISTRIBUTE_TOOL::AlignCenterX(), ALIGN_DISTRIBUTE_TOOL::AlignCenterY(), ALIGN_DISTRIBUTE_TOOL::AlignTop(), PCB_EDIT_TABLE_TOOL::copyCell(), FOOTPRINT::CoverageRatio(), BOARD_ADAPTER::createTrackWithMargin(), DeleteStructure(), DIALOG_PAD_PROPERTIES::DIALOG_PAD_PROPERTIES(), ALIGN_DISTRIBUTE_TOOL::doAlignLeft(), ALIGN_DISTRIBUTE_TOOL::doAlignRight(), EDIT_TOOL::DragArcTrack(), KIGFX::PCB_PAINTER::draw(), PCB_SELECTION_TOOL::FilterCollectorForFreePads(), PCB_SELECTION_TOOL::FilterCollectorForHierarchy(), PCB_SELECTION_TOOL::FilterCollectorForTableCells(), GetBoard(), getClosestGroup(), PCB_TABLECELL::GetColumn(), GetParentFootprint(), PCB_TABLECELL::GetRow(), ALIGN_DISTRIBUTE_TOOL::GetSelections(), PAD::IsLocked(), PCB_SELECTION_TOOL::itemPassesFilter(), memberOfGroupFunc(), EDIT_TOOL::MoveExact(), PAD::operator==(), PAD::PAD(), PCB_IO_KICAD_SEXPR_PARSER::parsePCB_TEXT_effects(), PCB_SELECTION_TOOL::pruneObscuredSelectionCandidates(), POSITION_RELATIVE_TOOL::RelativeItemSelectionMove(), PAD::Similarity(), SwapItemData(), DRC_TEST_PROVIDER_COPPER_CLEARANCE::testPadAgainstItem(), KIGFX::PCB_VIEW::Update(), PCB_TABLECELL_POINT_EDIT_BEHAVIOR::UpdateItem(), PAD_POINT_EDIT_BEHAVIOR::UpdatePoints(), and DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS::visitItem().

◆ GetParentAsString()

wxString BOARD_ITEM::GetParentAsString ( ) const

For "parent" property.

Returns: the parent footprint's ref or the parent item's UUID.

Definition at line 373 of file board_item.cpp.

References KIID::AsString(), EDA_ITEM::m_parent, and EDA_ITEM::m_Uuid.

Referenced by BOARD_ITEM_DESC::BOARD_ITEM_DESC().

◆ GetParentFootprint()

FOOTPRINT * BOARD_ITEM::GetParentFootprint ( ) const

Definition at line 298 of file board_item.cpp.

References GetParent(), PCB_FOOTPRINT_T, PCB_GENERATOR_T, PCB_GROUP_T, PCB_TABLE_T, and EDA_ITEM::Type().

Referenced by CN_CONNECTIVITY_ALGO::Add(), PCB_IO_IPC2581::addPad(), FEATURES_MANAGER::AddPadShape(), STEP_PCB_MODEL::AddPadShape(), PCB_IO_IPC2581::addPadStack(), GRAPHICS_IMPORTER_PCBNEW::AddPolygon(), DRC_TEST_PROVIDER_SOLDER_MASK::checkItemMask(), DRC_TEST_PROVIDER_SOLDER_MASK::checkMaskAperture(), DIALOG_TRACK_VIA_PROPERTIES::confirmPadChange(), EDIT_TOOL::DeleteItems(), DIALOG_TEXT_PROPERTIES::DIALOG_TEXT_PROPERTIES(), DIALOG_TEXTBOX_PROPERTIES::DIALOG_TEXTBOX_PROPERTIES(), doPushPadProperties(), KIGFX::PCB_PAINTER::draw(), KIGFX::PCB_PAINTER::Draw(), EDIT_TOOL::Duplicate(), DRC_ENGINE::EvalRules(), PCB_IO_KICAD_SEXPR::format(), FormatProbeItem(), PCB_IO_IPC2581::generateLayerSetNet(), PAD::GetClearanceOverrides(), PCB_BASE_EDIT_FRAME::GetContextualTextVars(), PCB_TEXT::GetDrawRotation(), PAD::GetFPRelativeOrientation(), GetFPRelativePosition(), PAD::GetItemDescription(), PCB_FIELD::GetItemDescription(), PCB_SHAPE::GetItemDescription(), PCB_TEXT::GetItemDescription(), PCB_SHAPE::GetMenuImage(), PCB_SHAPE::GetMsgPanelInfo(), PCB_TEXT::GetMsgPanelInfo(), PANEL_SETUP_LAYERS::getRemovedLayersWithItems(), PCB_TEXT::GetShownText(), PCB_TEXTBOX::GetShownText(), PAD::GetSolderMaskExpansion(), PAD::GetSolderPasteMargin(), PCB_FIELDS_GRID_TABLE::GetValue(), PAD::GetZoneConnectionOverrides(), PCB_SELECTION_TOOL::grabUnconnected(), GROUP_TOOL::Group(), hash_fp_item(), PAD::ImportSettingsFrom(), DIALOG_PAD_PROPERTIES::initValues(), GENERAL_COLLECTOR::Inspect(), PCB_SHAPE::IsConnected(), PAD::IsFlipped(), PNS_PCBNEW_RULE_RESOLVER::IsInNetTie(), PNS_PCBNEW_RULE_RESOLVER::IsKeepout(), PNS_PCBNEW_RULE_RESOLVER::IsNetTieExclusion(), DRC_ENGINE::IsNetTieExclusion(), PCB_SELECTION_TOOL::itemPassesFilter(), memberOfFootprintFunc(), memberOfSheetFunc(), BOARD::Move(), ARRAY_TOOL::onDialogClosed(), PCB_IO_KICAD_SEXPR_PARSER::parsePCB_SHAPE(), PCB_IO_KICAD_SEXPR_PARSER::parseTextBoxContent(), PCB_IO_IPC2581::pinName(), BRDITEMS_PLOTTER::PlotPad(), BRDITEMS_PLOTTER::PlotShape(), BRDITEMS_PLOTTER::PlotTableBorders(), DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS::processItem(), BOARD_COMMIT::Push(), PAD_TOOL::pushPadSettings(), PCB_BASE_EDIT_FRAME::PutDataInPreviousState(), PCB_GRID_HELPER::queryVisible(), PAD::Recombine(), PCB_IO_KICAD_SEXPR_PARSER::resolveGroups(), BOARD_COMMIT::Revert(), PAD::SameLogicalPadAs(), CLIPBOARD_IO::SaveSelection(), PCB_SELECTION_TOOL::Selectable(), PAD::SetFPRelativeOrientation(), SetFPRelativePosition(), PCB_FIELDS_GRID_TABLE::SetValue(), PAD::SharesNetTieGroup(), DRC_TEST_PROVIDER_SOLDER_MASK::testItemAgainstItems(), DRC_TEST_PROVIDER_COPPER_CLEARANCE::testItemAgainstZone(), DRC_TEST_PROVIDER_PHYSICAL_CLEARANCE::testShapeLineChain(), DIALOG_PAD_PROPERTIES::TransferDataFromWindow(), PANEL_SETUP_LAYERS::TransferDataFromWindow(), DIALOG_PAD_PROPERTIES::transferDataToPad(), PCB_IO_EAGLE::transferPad(), PCB_POINT_EDITOR::updateItem(), PCB_FIELD::ViewGetLOD(), PCB_SHAPE::ViewGetLOD(), PCB_TEXT::ViewGetLOD(), ZONE::ViewGetLOD(), DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS::visitItem(), and ZONE::ZONE().

◆ GetParentGroup()

PCB_GROUP * BOARD_ITEM::GetParentGroup ( ) const

inline

Definition at line 90 of file board_item.h.

References m_group.

Referenced by PCB_GROUP::AddItem(), PCB_GENERATOR::AddItem(), EDIT_TOOL::DeleteItems(), Duplicate(), PCB_EDIT_FRAME::ExchangeFootprint(), PCB_EDIT_FRAME::ExportFootprintsToLibrary(), GENERATOR_TOOL::GENERATOR_TOOL(), getClosestGroup(), BOARD::GroupLegalOps(), IsLocked(), memberOfGroupFunc(), TRACKS_CLEANER::mergeCollinearSegments(), BOARD_EDITOR_CONTROL::modifyLockSelected(), BOARD::Move(), PCB_CONTROL::Paste(), pasteFootprintItemsToFootprintEditor(), PCB_CONTROL::placeBoardItems(), DRAWING_TOOL::PlaceTuningPattern(), PCB_CONTROL::pruneItemLayers(), BOARD_COMMIT::Push(), PCB_BASE_EDIT_FRAME::PutDataInPreviousState(), BOARD::Remove(), FOOTPRINT::Remove(), GROUP_TOOL::RemoveFromGroup(), BOARD_COMMIT::Revert(), PCB_SELECTION_TOOL::Selectable(), SwapItemData(), PNS_KICAD_IFACE_BASE::syncArc(), PNS_KICAD_IFACE_BASE::syncTrack(), PNS_KICAD_IFACE_BASE::syncVia(), DIALOG_GROUP_PROPERTIES::TransferDataFromWindow(), DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS::visitItem(), DIALOG_GLOBAL_EDIT_TEARDROPS::visitItem(), DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS::visitItem(), and PCB_GROUP::WithinScope().

◆ GetPosition()

virtual VECTOR2I EDA_ITEM::GetPosition ( ) const

inlinevirtualinherited

Reimplemented in SCH_BITMAP, SCH_BUS_ENTRY_BASE, SCH_FIELD, SCH_JUNCTION, SCH_LINE, SCH_MARKER, SCH_NO_CONNECT, SCH_PIN, SCH_SHAPE, SCH_SHEET, SCH_SYMBOL, SCH_TABLE, SCH_TEXT, GERBER_DRAW_ITEM, DELETED_BOARD_ITEM, DS_DRAW_ITEM_LINE, DS_DRAW_ITEM_POLYPOLYGONS, DS_DRAW_ITEM_RECT, DS_DRAW_ITEM_PAGE, DS_DRAW_ITEM_TEXT, DS_DRAW_ITEM_BITMAP, KIGFX::ORIGIN_VIEWITEM, BOARD, FOOTPRINT, TUNING_STATUS_VIEW_ITEM, NETINFO_ITEM, PAD, PCB_DIMENSION_BASE, PCB_GENERATOR, PCB_GROUP, PCB_MARKER, PCB_REFERENCE_IMAGE, PCB_SHAPE, PCB_TABLE, PCB_TARGET, PCB_TEXT, PCB_TRACK, PCB_ARC, PCB_VIA, ROUTER_STATUS_VIEW_ITEM, and ZONE.

Definition at line 243 of file eda_item.h.

Referenced by SYMBOL_EDITOR_MOVE_TOOL::AlignElements(), SCH_MOVE_TOOL::AlignToGrid(), TEARDROP_MANAGER::areItemsInSameZone(), SCH_EDIT_TOOL::ChangeTextType(), SCH_ITEM::compare(), TEST_BOARD_ITEM_FIXTURE::CompareItems(), TEST_EE_ITEM_FIXTURE::CompareItems(), PCB_GRID_HELPER::computeAnchors(), EE_GRID_HELPER::computeAnchors(), CONVERT_TOOL::CreatePolys(), SCH_EDIT_FRAME::DeleteJunction(), EDIT_TOOL::doMoveSelection(), SCH_MOVE_TOOL::doMoveSelection(), SYMBOL_EDITOR_EDIT_TOOL::Duplicate(), CONNECTION_GRAPH::ercCheckBusToBusConflicts(), CONNECTION_GRAPH::ercCheckBusToNetConflicts(), CONNECTION_GRAPH::ercCheckMultipleDrivers(), CONNECTION_GRAPH::ercCheckNoConnects(), CONNECTION_GRAPH::ercCheckSingleGlobalLabel(), PCB_SELECTION_TOOL::FindItem(), GERBVIEW_SELECTION::GetCenter(), SCH_MOVE_TOOL::getConnectedDragItems(), EDA_ITEM::GetFocusPosition(), GetFPRelativePosition(), RC_ITEM::GetJsonViolation(), getMinDist(), SCH_FIELD::GetParentPosition(), EDA_ITEM::GetSortPosition(), PCB_SELECTION::GetTopLeftItem(), EE_SELECTION::GetTopLeftItem(), GetX(), GetY(), SCH_EDIT_TOOL::Mirror(), SYMBOL_EDITOR_EDIT_TOOL::Mirror(), EDIT_TOOL::MoveExact(), DIALOG_MIGRATE_BUSES::onItemSelected(), BOARD::cmp_items::operator()(), PAD::PAD(), SCH_EDITOR_CONTROL::Paste(), PL_EDIT_TOOL::Paste(), PCB_CONTROL::placeBoardItems(), POSITION_RELATIVE_TOOL::PositionRelative(), BACK_ANNOTATE::processNetNameChange(), PCB_BASE_EDIT_FRAME::PutDataInPreviousState(), SCH_EDIT_TOOL::RepeatDrawItem(), SCH_EDIT_TOOL::Rotate(), SYMBOL_EDITOR_EDIT_TOOL::Rotate(), test::DRC_TEST_PROVIDER_DIFF_PAIR_COUPLING::Run(), DRC_TEST_PROVIDER_TEXT_DIMS::Run(), DRC_TEST_PROVIDER_TEXT_MIRRORING::Run(), RC_ITEM::ShowReport(), SCH_EDIT_TOOL::Swap(), SYMBOL_EDITOR_EDIT_TOOL::Swap(), EDIT_TOOL::Swap(), DRC_TEST_PROVIDER_MISC::testTextVars(), ERC_TESTER::TestTextVars(), TransformItem(), EDIT_TOOL::updateModificationPoint(), PL_EDIT_TOOL::updateModificationPoint(), DIALOG_CREATE_ARRAY::UpdatePickedItem(), and DIALOG_POSITION_RELATIVE::UpdatePickedItem().

◆ GetSortPosition()

virtual VECTOR2I EDA_ITEM::GetSortPosition ( ) const

inlinevirtualinherited

Return the coordinates that should be used for sorting this element visually compared to other elements.

For instance, for lines the midpoint might be a better sorting point than either end.

Returns: X,Y coordinate of the sort point

Reimplemented in SCH_LINE.

Definition at line 259 of file eda_item.h.

References EDA_ITEM::GetPosition().

◆ GetStroke()

STROKE_PARAMS BOARD_ITEM::GetStroke ( ) const

virtual

Reimplemented in PCB_SHAPE.

Definition at line 86 of file board_item.cpp.

References DEFAULT_LINE_WIDTH, EDA_ITEM::GetClass(), EDA_IU_SCALE::mmToIU(), and pcbIUScale.

Referenced by CONVERT_TOOL::CreatePolys().

◆ GetTempFlags()

EDA_ITEM_FLAGS EDA_ITEM::GetTempFlags ( ) const

inlineinherited

Definition at line 146 of file eda_item.h.

References CANDIDATE, IS_LINKED, EDA_ITEM::m_flags, SELECTED_BY_DRAG, and SKIP_STRUCT.

Referenced by EDA_ITEM::ClearTempFlags(), and SCH_ITEM::SwapFlags().

◆ GetTypeDesc()

wxString EDA_ITEM::GetTypeDesc ( ) const

inherited

Return a translated description of the type for this EDA_ITEM for display in user facing messages.

Definition at line 323 of file eda_item.cpp.

References ENUM_MAP< T >::Instance(), and EDA_ITEM::Type().

Referenced by PCB_GROUP::AddItem(), EDIT_TOOL::doMoveSelection(), and EDA_ITEM::GetFriendlyName().

◆ GetX()

int BOARD_ITEM::GetX ( ) const

inline

Definition at line 94 of file board_item.h.

References EDA_ITEM::GetPosition(), and VECTOR2< T >::x.

Referenced by STEP_PCB_MODEL::AddPadShape(), BOARD_ITEM_DESC::BOARD_ITEM_DESC(), FOOTPRINT_SEARCH_HANDLER::getResultCell(), ZONE_SEARCH_HANDLER::getResultCell(), TEXT_SEARCH_HANDLER::getResultCell(), SetY(), and ZONE_DESC::ZONE_DESC().

◆ GetY()

int BOARD_ITEM::GetY ( ) const

inline

Definition at line 100 of file board_item.h.

References EDA_ITEM::GetPosition(), and VECTOR2< T >::y.

Referenced by STEP_PCB_MODEL::AddPadShape(), BOARD_ITEM_DESC::BOARD_ITEM_DESC(), FOOTPRINT_SEARCH_HANDLER::getResultCell(), ZONE_SEARCH_HANDLER::getResultCell(), TEXT_SEARCH_HANDLER::getResultCell(), SetX(), and ZONE_DESC::ZONE_DESC().

◆ HasDrilledHole()

virtual bool BOARD_ITEM::HasDrilledHole ( ) const

inlinevirtual

Reimplemented in PAD, and PCB_VIA.

Definition at line 160 of file board_item.h.

Referenced by DRC_ENGINE::EvalRules(), BOARD_INSPECTION_TOOL::InspectClearance(), and PNS_PCBNEW_RULE_RESOLVER::IsDrilledHole().

◆ HasFlag()

bool EDA_ITEM::HasFlag ( EDA_ITEM_FLAGS aFlag ) const

inlineinherited

Definition at line 131 of file eda_item.h.

References EDA_ITEM::m_flags.

Referenced by GRAPHICS_CLEANER::cleanupShapes(), PCB_BASE_EDIT_FRAME::ClearListAndDeleteItems(), SCH_EDIT_TOOL::DoDelete(), SCH_MOVE_TOOL::doMoveSelection(), KIGFX::SCH_PAINTER::draw(), PCB_TUNING_PATTERN::Flip(), SCH_MOVE_TOOL::getConnectedDragItems(), SCH_MOVE_TOOL::getConnectedItems(), FOOTPRINT::IsConflicting(), ZONE::IsConflicting(), SCH_SCREEN::MarkConnections(), PCB_TUNING_PATTERN::Mirror(), PCB_TUNING_PATTERN::Move(), SCH_MOVE_TOOL::moveItem(), SCH_MOVE_TOOL::orthoLineDrag(), SYMBOL_EDITOR_PIN_TOOL::PlacePin(), GERBVIEW_FRAME::RemapLayers(), SCH_EDIT_TOOL::Rotate(), PCB_TUNING_PATTERN::Rotate(), EE_TOOL_BASE< T >::saveCopyInUndoList(), PCB_SELECTION_TOOL::selectAllConnectedShapes(), EE_SELECTION_TOOL::selectMultiple(), SCH_COMMIT::Stage(), and PCB_TUNING_PATTERN::ViewDraw().

◆ HasHole()

virtual bool BOARD_ITEM::HasHole ( ) const

inlinevirtual

Reimplemented in PAD, and PCB_VIA.

Definition at line 155 of file board_item.h.

Referenced by DRAWING_TOOL::DrawVia(), DRC_RTREE::Insert(), BOARD_INSPECTION_TOOL::InspectClearance(), DRC_TEST_PROVIDER_PHYSICAL_CLEARANCE::Run(), DRC_TEST_PROVIDER_PHYSICAL_CLEARANCE::testItemAgainstItem(), DRC_TEST_PROVIDER_COPPER_CLEARANCE::testItemAgainstZone(), DRC_TEST_PROVIDER_PHYSICAL_CLEARANCE::testItemAgainstZones(), DRC_TEST_PROVIDER_COPPER_CLEARANCE::testSingleLayerItemAgainstItem(), and PCB_CONTROL::UpdateMessagePanel().

◆ HasLineStroke()

virtual bool BOARD_ITEM::HasLineStroke ( ) const

inlinevirtual

Check if this item has line stoke properties.

See also: STROKE_PARAMS

Reimplemented in PCB_SHAPE.

Definition at line 227 of file board_item.h.

Referenced by CONVERT_TOOL::CreatePolys().

◆ HitTest() [1/2]

virtual bool EDA_ITEM::HitTest	(	const BOX2I &	aRect,
		bool	aContained,
		int	aAccuracy = `0`
	)		const

inlinevirtualinherited

Test if aRect intersects this item.

Parameters

aRect	A reference to a BOX2I object containing the rectangle to test.
aContained	Set to true to test for containment instead of an intersection.
aAccuracy	Increase aRect by this amount.

Returns: True if aRect contains or intersects the item bounding box.

Reimplemented in PCB_TUNING_PATTERN, SCH_BITMAP, SCH_BUS_ENTRY_BASE, SCH_FIELD, SCH_JUNCTION, SCH_LABEL_BASE, SCH_LINE, SCH_NO_CONNECT, SCH_PIN, SCH_SHAPE, SCH_SHEET, SCH_SYMBOL, SCH_TABLE, SCH_TEXT, SCH_TEXTBOX, DS_DRAW_ITEM_BASE, DS_DRAW_ITEM_POLYPOLYGONS, DS_DRAW_ITEM_RECT, DS_DRAW_ITEM_TEXT, DS_DRAW_ITEM_BITMAP, FOOTPRINT, PAD, PCB_DIMENSION_BASE, PCB_GROUP, PCB_MARKER, PCB_REFERENCE_IMAGE, PCB_SHAPE, PCB_TABLE, PCB_TARGET, PCB_TEXT, PCB_TEXTBOX, PCB_TRACK, PCB_VIA, PCB_ARC, ZONE, and GERBER_DRAW_ITEM.

Definition at line 229 of file eda_item.h.

◆ HitTest() [2/2]

virtual bool EDA_ITEM::HitTest	(	const VECTOR2I &	aPosition,
		int	aAccuracy = `0`
	)		const

inlinevirtualinherited

Test if aPosition is inside or on the boundary of this item.

Parameters

aPosition	A reference to a VECTOR2I object containing the coordinates to test.
aAccuracy	Increase the item bounding box by this amount.

Returns: True if aPosition is within the item bounding box.

Reimplemented in RATSNEST_VIEW_ITEM, SCH_SHEET, PCB_DIMENSION_BASE, PCB_TEXT, PCB_TEXTBOX, SCH_BITMAP, SCH_BUS_ENTRY_BASE, SCH_FIELD, SCH_JUNCTION, SCH_LABEL_BASE, SCH_LINE, SCH_MARKER, SCH_NO_CONNECT, SCH_PIN, SCH_SHAPE, SCH_SHEET_PIN, SCH_SYMBOL, SCH_TABLE, SCH_TEXT, SCH_TEXTBOX, DS_DRAW_ITEM_BASE, DS_DRAW_ITEM_LINE, DS_DRAW_ITEM_POLYPOLYGONS, DS_DRAW_ITEM_RECT, DS_DRAW_ITEM_PAGE, DS_DRAW_ITEM_TEXT, DS_DRAW_ITEM_BITMAP, FOOTPRINT, PCB_TUNING_PATTERN, PAD, PCB_GROUP, PCB_MARKER, PCB_REFERENCE_IMAGE, PCB_SHAPE, PCB_TABLE, PCB_TARGET, PCB_TRACK, PCB_ARC, PCB_VIA, ZONE, and GERBER_DRAW_ITEM.

Definition at line 216 of file eda_item.h.

Referenced by PCB_GRID_HELPER::BestSnapAnchor(), TEARDROP_MANAGER::findAnchorPointsOnTrack(), PL_SELECTION_TOOL::guessSelectionCandidates(), EE_SELECTION_TOOL::GuessSelectionCandidates(), DS_DRAW_ITEM_BASE::HitTest(), EE_COLLECTOR::Inspect(), GENERAL_COLLECTOR::Inspect(), GERBER_COLLECTOR::Inspect(), PCB_SELECTION_TOOL::selectionContains(), PCB_SELECTION_TOOL::selectMultiple(), and PCB_GRID_HELPER::SnapToPad().

◆ IsBOARD_ITEM()

bool KIGFX::VIEW_ITEM::IsBOARD_ITEM ( ) const

inlineinherited

Definition at line 100 of file view_item.h.

Referenced by KIGFX::PCB_VIEW::Add(), PCB_BASE_EDIT_FRAME::ClearListAndDeleteItems(), CONVERT_TOOL::CreatePolys(), EDIT_TOOL::doMoveSelection(), KIGFX::PCB_PAINTER::Draw(), PCB_SELECTION_TOOL::highlightInternal(), PCB_TEST_SELECTION_TOOL::highlightInternal(), GENERAL_COLLECTOR::Inspect(), BOARD_INSPECTION_TOOL::InspectClearance(), BOARD_INSPECTION_TOOL::InspectConstraints(), BOARD_COMMIT::MakeImage(), BOARD::Move(), DRAWING_TOOL::PlaceImportedGraphics(), EDIT_TOOL::Properties(), BOARD_COMMIT::Push(), PCB_BASE_EDIT_FRAME::PutDataInPreviousState(), KIGFX::PCB_VIEW::Remove(), EDIT_TOOL::removeNonRootItems(), BOARD_COMMIT::Revert(), PCB_EDIT_FRAME::SetActiveLayer(), PCB_BASE_FRAME::SetPlotSettings(), PCB_EDIT_FRAME::ShowBoardSetupDialog(), EDIT_TOOL::Swap(), PCB_SELECTION_TOOL::unhighlightInternal(), PCB_TEST_SELECTION_TOOL::unhighlightInternal(), KIGFX::PCB_VIEW::Update(), EDIT_TOOL::updateModificationPoint(), and DIALOG_POSITION_RELATIVE::UpdatePickedItem().

◆ IsBrightened()

bool EDA_ITEM::IsBrightened ( ) const

inlineinherited

Definition at line 112 of file eda_item.h.

References BRIGHTENED, and EDA_ITEM::m_flags.

Referenced by KIGFX::PCB_PAINTER::draw(), KIGFX::SCH_PAINTER::draw(), KIGFX::GERBVIEW_PAINTER::draw(), SCH_FIND_REPLACE_TOOL::FindNext(), SCH_EDIT_FRAME::FocusOnItem(), SYMBOL_EDIT_FRAME::FocusOnItem(), KIGFX::PCB_RENDER_SETTINGS::GetColor(), KIGFX::DS_RENDER_SETTINGS::GetColor(), KIGFX::SCH_PAINTER::getLineWidth(), and SCH_FIND_REPLACE_TOOL::UpdateFind().

◆ IsConnected()

virtual bool BOARD_ITEM::IsConnected ( ) const

inlinevirtual

Returns information if the object is derived from BOARD_CONNECTED_ITEM.

Returns: True if the object is of BOARD_CONNECTED_ITEM type, false otherwise.

Reimplemented in BOARD_CONNECTED_ITEM, PCB_SHAPE, and ZONE.

Definition at line 133 of file board_item.h.

Referenced by DRC_ENGINE::EvalRules(), PCB_SELECTION_TOOL::expandConnection(), PNS::NODE::FindItemByParent(), KIGFX::PCB_RENDER_SETTINGS::GetColor(), BOARD_INSPECTION_TOOL::getItemDescription(), hasNetclassFunc(), inDiffPairFunc(), BOARD_INSPECTION_TOOL::InspectClearance(), CONNECTIVITY_DATA::MarkItemNetAsDirty(), CN_CONNECTIVITY_ALGO::markItemNetAsDirty(), DRC_TEST_PROVIDER_SOLDER_MASK::testItemAgainstItems(), DRC_TEST_PROVIDER_COPPER_CLEARANCE::testItemAgainstZone(), and DRC_TEST_PROVIDER_SOLDER_MASK::testMaskItemAgainstZones().

◆ IsEntered()

bool EDA_ITEM::IsEntered ( ) const

inlineinherited

Definition at line 111 of file eda_item.h.

References ENTERED, and EDA_ITEM::m_flags.

Referenced by KIGFX::PCB_PAINTER::draw().

◆ IsForceVisible()

bool EDA_ITEM::IsForceVisible ( ) const

inlineinherited

Definition at line 195 of file eda_item.h.

References EDA_ITEM::m_forceVisible.

Referenced by KIGFX::SCH_PAINTER::draw(), SCH_FIELD::Plot(), and SCH_FIELD::Print().

◆ IsKnockout()

virtual bool BOARD_ITEM::IsKnockout ( ) const

inlinevirtual

Definition at line 324 of file board_item.h.

References m_isKnockout.

Referenced by BOARD_ADAPTER::addText(), KIGFX::PCB_PAINTER::draw(), PCB_IO_KICAD_SEXPR::format(), PCB_IO_IPC2581::generateLayerSetNet(), PCB_TEXT::GetBoundingBox(), PCB_TEXT::GetEffectiveShape(), PCB_FIELDS_GRID_TABLE::GetValueAsBool(), FEATURES_MANAGER::InitFeatureList(), PCB_TEXT_DESC::PCB_TEXT_DESC(), BRDITEMS_PLOTTER::PlotBoardGraphicItem(), BRDITEMS_PLOTTER::PlotFootprintGraphicItems(), BRDITEMS_PLOTTER::PlotFootprintTextItems(), PCB_TEXT::Serialize(), PCB_TEXT::TextHitTest(), and PCB_TEXT::TransformTextToPolySet().

◆ IsLocked()

bool BOARD_ITEM::IsLocked ( ) const

virtual

Reimplemented in FOOTPRINT, and PAD.

Definition at line 75 of file board_item.cpp.

References GetBoard(), BOARD::GetBoardUse(), GetParentGroup(), IsLocked(), and m_isLocked.

Referenced by BOARD_ITEM_DESC::BOARD_ITEM_DESC(), KI_TEST::CheckFpShape(), KI_TEST::CheckFpZone(), DIALOG_GROUP_PROPERTIES::DIALOG_GROUP_PROPERTIES(), DIALOG_TRACK_VIA_PROPERTIES::DIALOG_TRACK_VIA_PROPERTIES(), DIALOG_GLOBAL_DELETION::DoGlobalDeletions(), EDIT_TOOL::DragArcTrack(), EDIT_TOOL::FilletTracks(), PCB_IO_KICAD_SEXPR::format(), GENERATOR_TOOL::GENERATOR_TOOL(), PCB_DIMENSION_BASE::GetMsgPanelInfo(), PCB_GROUP::GetMsgPanelInfo(), PCB_SHAPE::GetMsgPanelInfo(), PCB_TABLECELL::GetMsgPanelInfo(), PCB_TEXT::GetMsgPanelInfo(), PCB_TEXTBOX::GetMsgPanelInfo(), ZONE::GetMsgPanelInfo(), PCB_TRACK::GetMsgPanelInfoBase_Common(), ALIGN_DISTRIBUTE_TOOL::GetSelections(), PCB_SELECTION_CONDITIONS::HasLockedItems(), PCB_SELECTION_CONDITIONS::HasUnlockedItems(), ROUTER_TOOL::InlineDrag(), GENERAL_COLLECTOR::Inspect(), PCB_CONTROL::InteractiveDelete(), IsLocked(), PAD::IsLocked(), PCB_SELECTION_TOOL::itemPassesFilter(), CADSTAR_PCB_ARCHIVE_LOADER::makeTracksFromShapes(), PCB_POINT_EDITOR::OnSelectionChange(), ZONE_SETTINGS::operator<<(), LINE_FILLET_ROUTINE::ProcessLinePair(), LINE_CHAMFER_ROUTINE::ProcessLinePair(), DOGBONE_CORNER_ROUTINE::ProcessLinePair(), processTextItem(), PCB_SELECTION_TOOL::RequestSelection(), PCB_DIMENSION_BASE::Serialize(), PCB_SHAPE::Serialize(), PCB_TEXT::Serialize(), PCB_TEXTBOX::Serialize(), PCB_TRACK::Serialize(), PCB_ARC::Serialize(), PCB_VIA::Serialize(), PNS_KICAD_IFACE_BASE::syncArc(), PNS_KICAD_IFACE_BASE::syncTrack(), PNS_KICAD_IFACE_BASE::syncVia(), TRACKS_CLEANER::testMergeCollinearSegments(), DIALOG_REFERENCE_IMAGE_PROPERTIES::TransferDataToWindow(), DIALOG_TEXTBOX_PROPERTIES::TransferDataToWindow(), ViewGetLayers(), PCB_SHAPE::ViewGetLayers(), PCB_TEXT::ViewGetLayers(), PCB_TEXTBOX::ViewGetLayers(), PCB_TRACK::ViewGetLayers(), and PCB_VIA::ViewGetLayers().

◆ IsModified()

bool EDA_ITEM::IsModified ( ) const

inlineinherited

Definition at line 106 of file eda_item.h.

References IS_CHANGED, and EDA_ITEM::m_flags.

Referenced by PCB_EDIT_FRAME::OpenProjectFiles().

◆ IsMoving()

bool EDA_ITEM::IsMoving ( ) const

inlineinherited

Definition at line 108 of file eda_item.h.

References IS_MOVING, and EDA_ITEM::m_flags.

Referenced by SCH_EDIT_TOOL::AutoplaceFields(), SCH_PIN::CalcEdit(), PCB_GRID_HELPER::computeAnchors(), EDIT_TOOL::doMoveSelection(), KIGFX::SCH_PAINTER::draw(), EDIT_TOOL::Flip(), SCH_EDIT_TOOL::JustifyText(), SCH_EDIT_TOOL::Mirror(), SYMBOL_EDITOR_EDIT_TOOL::Mirror(), PCB_BASE_FRAME::PlaceFootprint(), SCH_EDIT_TOOL::Rotate(), SYMBOL_EDITOR_EDIT_TOOL::Rotate(), SCH_EDIT_TOOL::Swap(), and SYMBOL_EDITOR_EDIT_TOOL::Swap().

◆ IsNew()

bool EDA_ITEM::IsNew ( ) const

inlineinherited

Definition at line 107 of file eda_item.h.

References IS_NEW, and EDA_ITEM::m_flags.

Referenced by SCH_EDIT_TOOL::ChangeBodyStyle(), SCH_EDIT_TOOL::ChangeTextType(), EDIT_TOOL::doMoveSelection(), SYMBOL_EDITOR_MOVE_TOOL::doMoveSelection(), SCH_MOVE_TOOL::doMoveSelection(), KIGFX::SCH_PAINTER::draw(), SYMBOL_EDITOR_PIN_TOOL::EditPinProperties(), PCB_TUNING_PATTERN::EditStart(), EDIT_TOOL::Flip(), SCH_MOVE_TOOL::getConnectedDragItems(), DIALOG_PIN_PROPERTIES::getSyncPinsMessage(), SYMBOL_EDITOR_DRAWING_TOOLS::Init(), SCH_LINE_WIRE_BUS_TOOL::IsDrawingLineWireOrBus(), SCH_SCREEN::IsTerminalPoint(), EE_POINT_EDITOR::Main(), PL_EDIT_TOOL::Main(), PL_POINT_EDITOR::Main(), EDIT_TOOL::MoveExact(), PCB_BASE_FRAME::PlaceFootprint(), SYMBOL_EDITOR_PIN_TOOL::PlacePin(), DIALOG_LABEL_PROPERTIES::TransferDataFromWindow(), DIALOG_SHAPE_PROPERTIES::TransferDataFromWindow(), DIALOG_SHEET_PIN_PROPERTIES::TransferDataFromWindow(), DIALOG_SHEET_PROPERTIES::TransferDataFromWindow(), and PCB_TUNING_PATTERN::ViewDraw().

◆ IsOnCopperLayer()

virtual bool BOARD_ITEM::IsOnCopperLayer ( ) const

inlinevirtual

Returns: true if the object is on any copper layer, false otherwise.

Reimplemented in PAD, PCB_GROUP, PCB_TRACK, and ZONE.

Definition at line 150 of file board_item.h.

References GetLayer(), and IsCopperLayer().

Referenced by CN_CONNECTIVITY_ALGO::Add(), FOOTPRINT::CheckNetTies(), DRC_ENGINE::EvalRules(), KIGFX::PCB_RENDER_SETTINGS::GetColor(), PCB_SHAPE::GetItemDescription(), BOARD_INSPECTION_TOOL::Init(), BOARD_INSPECTION_TOOL::InspectClearance(), PCB_SHAPE::IsConnected(), isCopper(), PCB_SELECTION_TOOL::isExpandableGraphicShape(), PCB_SHAPE::SetLayer(), BOARD_CONNECTED_ITEM::SetNetCode(), shapeNeedsUpdate(), PCB_CONTROL::TrackDisplayMode(), PCB_CONTROL::UpdateMessagePanel(), and PCB_SHAPE::ViewGetLayers().

◆ IsOnLayer()

virtual bool BOARD_ITEM::IsOnLayer ( PCB_LAYER_ID aLayer ) const

inlinevirtual

Test to see if this object is on the given layer.

Virtual so objects like PAD, which reside on multiple layers can do their own form of testing.

Parameters

aLayer The layer to test for.

Returns: true if on given layer, else false.

Reimplemented in FOOTPRINT, PAD, PCB_GROUP, PCB_SHAPE, PCB_TRACK, PCB_VIA, and ZONE.

Definition at line 319 of file board_item.h.

References m_layer.

Referenced by DRC_TEST_PROVIDER_SOLDER_MASK::addItemToRTrees(), CreepageGraph::AddNetElements(), DRC_TEST_PROVIDER_SOLDER_MASK::checkMaskAperture(), CN_VISITOR::checkZoneItemConnection(), existsOnLayerFunc(), GENERAL_COLLECTOR::Inspect(), PCB_LAYER_COLLECTOR::Inspect(), BOARD_INSPECTION_TOOL::InspectClearance(), isEdge(), PNS_KICAD_IFACE::IsItemVisible(), BOARD_COMMIT::Push(), ROUTER_PREVIEW_ITEM::ROUTER_PREVIEW_ITEM(), DRC_TEST_PROVIDER_EDGE_CLEARANCE::Run(), DRC_TEST_PROVIDER_PHYSICAL_CLEARANCE::Run(), DRC_TEST_PROVIDER_SOLDER_MASK::testMaskBridges(), and PCB_CONTROL::UpdateMessagePanel().

◆ IsReplaceable()

virtual bool EDA_ITEM::IsReplaceable ( ) const

inlinevirtualinherited

Override this method in any derived object that supports test find and replace.

Returns: True if the item has replaceable text that can be modified using the find and replace dialog.

Reimplemented in SCH_FIELD, SCH_LABEL, SCH_SHEET, SCH_SHEET_PIN, SCH_SYMBOL, SCH_TEXT, and SCH_TEXTBOX.

Definition at line 415 of file eda_item.h.

Referenced by EDA_ITEM::Matches().

◆ IsRollover()

bool EDA_ITEM::IsRollover ( ) const

inlineinherited

Definition at line 114 of file eda_item.h.

References IS_MOVING, IS_ROLLOVER, and EDA_ITEM::m_flags.

Referenced by KIGFX::SCH_PAINTER::draw().

◆ IsSCH_ITEM()

bool KIGFX::VIEW_ITEM::IsSCH_ITEM ( ) const

inlineinherited

Definition at line 99 of file view_item.h.

◆ IsSelected()

bool EDA_ITEM::IsSelected ( ) const

inlineinherited

Definition at line 110 of file eda_item.h.

References EDA_ITEM::m_flags, and SELECTED.

Referenced by ALIGN_DISTRIBUTE_TOOL::AlignBottom(), ALIGN_DISTRIBUTE_TOOL::AlignCenterX(), ALIGN_DISTRIBUTE_TOOL::AlignCenterY(), ALIGN_DISTRIBUTE_TOOL::AlignTop(), SCH_EDIT_TOOL::ChangeTextType(), DIALOG_CHANGE_SYMBOLS::DIALOG_CHANGE_SYMBOLS(), ALIGN_DISTRIBUTE_TOOL::doAlignLeft(), ALIGN_DISTRIBUTE_TOOL::doAlignRight(), EDIT_TOOL::doMoveSelection(), KIGFX::PCB_PAINTER::draw(), KIGFX::SCH_PAINTER::draw(), KIGFX::PCB_PAINTER::Draw(), KIGFX::SCH_PAINTER::drawItemBoundingBox(), DS_PROXY_UNDO_ITEM::DS_PROXY_UNDO_ITEM(), SCH_EDIT_FRAME::FlipBodyStyle(), RENDER_3D_OPENGL::get3dModelsFromFootprint(), KIGFX::PCB_RENDER_SETTINGS::GetColor(), KIGFX::GERBVIEW_RENDER_SETTINGS::GetColor(), KIGFX::DS_RENDER_SETTINGS::GetColor(), SCH_MOVE_TOOL::getConnectedDragItems(), KIGFX::SCH_PAINTER::getLineWidth(), DIALOG_EXCHANGE_FOOTPRINTS::isMatch(), DIALOG_CHANGE_SYMBOLS::isMatch(), SCH_SCREEN::MarkConnections(), SCH_LINE::MergeOverlap(), SCH_EDIT_TOOL::Mirror(), EDIT_TOOL::MoveExact(), SCH_MOVE_TOOL::moveItem(), KIGFX::SCH_PAINTER::nonCached(), SCH_MOVE_TOOL::orthoLineDrag(), DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS::processItem(), BOARD_COMMIT::Push(), SCH_COMMIT::pushSchEdit(), EE_SELECTION_TOOL::RebuildSelection(), PCB_SELECTION_TOOL::RebuildSelection(), SCH_FIND_REPLACE_TOOL::ReplaceAll(), SCH_COMMIT::Revert(), SCH_EDIT_TOOL::Rotate(), EE_TOOL_BASE< T >::saveCopyInUndoList(), CLIPBOARD_IO::SaveSelection(), SCH_IO_KICAD_SEXPR::saveTable(), GERBVIEW_SELECTION_TOOL::select(), PCB_SELECTION_TOOL::select(), PCB_TEST_SELECTION_TOOL::select(), EE_SELECTION_TOOL::SelectColumns(), PCB_SELECTION_TOOL::SelectColumns(), EE_SELECTION_TOOL::selectMultiple(), PCB_SELECTION_TOOL::selectMultiple(), GERBVIEW_SELECTION_TOOL::selectPoint(), EE_SELECTION_TOOL::SelectRows(), PCB_SELECTION_TOOL::SelectRows(), SCH_COMMIT::Stage(), DIALOG_TABLE_PROPERTIES::TransferDataToWindow(), GERBVIEW_SELECTION_TOOL::unselect(), SCH_FIND_REPLACE_TOOL::UpdateFind(), SCH_SYMBOL::UpdatePins(), PCB_TUNING_PATTERN::ViewDraw(), PCB_FIELD::ViewGetLOD(), DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS::visitItem(), DIALOG_GLOBAL_EDIT_TEARDROPS::visitItem(), and DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS::visitItem().

◆ IsShownAsBitmap()

bool EDA_ITEM::IsShownAsBitmap ( ) const

inlineinherited

Definition at line 168 of file eda_item.h.

References IS_SHOWN_AS_BITMAP, and EDA_ITEM::m_flags.

◆ IsSideSpecific()

bool BOARD_ITEM::IsSideSpecific ( ) const

Definition at line 149 of file board_item.cpp.

References GetBoard(), GetLayerSet(), LT_BACK, LT_FRONT, m_layer, and LSET::SideSpecificMask().

Referenced by KIGFX::PCB_PAINTER::draw(), PCB_TEXT::Flip(), PCB_TEXTBOX::Flip(), and PCB_DIMENSION_BASE::Mirror().

◆ IsTented()

virtual bool BOARD_ITEM::IsTented ( PCB_LAYER_ID aLayer ) const

inlinevirtual

Checks if the given object is tented (its copper shape is covered by solder mask) on a given side of the board.

Parameters

aLayer is the layer to check tenting mode for: F_Cu and F_Mask are treated identically as are B_Cu and B_Mask

Returns: true if the object is tented on the given side

Reimplemented in PCB_VIA.

Definition at line 172 of file board_item.h.

Referenced by BOARD_INSPECTION_TOOL::InspectClearance(), and DRC_TEST_PROVIDER_SILK_CLEARANCE::Run().

◆ IsType()

virtual bool EDA_ITEM::IsType ( const std::vector< KICAD_T > & aScanTypes ) const

inlinevirtualinherited

Check whether the item is one of the listed types.

Parameters

aScanTypes List of item types

Returns: true if the item type is contained in the list aScanTypes

Reimplemented in SCH_FIELD, SCH_ITEM, SCH_LABEL_BASE, SCH_LINE, PAD, PCB_FIELD, PCB_SHAPE, PCB_TEXT, PCB_TEXTBOX, and PCB_VIA.

Definition at line 176 of file eda_item.h.

References EDA_ITEM::m_structType, and SCH_LOCATE_ANY_T.

Referenced by SCH_EDIT_TOOL::AutoplaceFields(), ROUTER_TOOL::CanInlineDrag(), DIALOG_FIELD_PROPERTIES::DIALOG_FIELD_PROPERTIES(), MULTICHANNEL_TOOL::findOtherItemsInRuleArea(), SCH_FIELD::GetCanonicalName(), SCH_FIELD::GetName(), SCH_FIELD::GetShownText(), PCB_SELECTION_TOOL::GuessSelectionCandidates(), SCH_ITEM::IsType(), PAD::IsType(), PCB_FIELD::IsType(), PCB_SHAPE::IsType(), PCB_TEXT::IsType(), PCB_TEXTBOX::IsType(), PCB_VIA::IsType(), EE_POINT_EDITOR::Main(), PL_POINT_EDITOR::Main(), CONVERT_TOOL::makePolysFromChainedSegs(), EE_SELECTION_TOOL::RequestSelection(), SCH_FIELD::SetId(), SCH_EDITOR_CONTROL::SimProbe(), SCH_COMMIT::Stage(), SCH_BASE_FRAME::UpdateItem(), and EDA_ITEM::Visit().

◆ IterateForward() [1/2]

template<class T >

static INSPECT_RESULT EDA_ITEM::IterateForward	(	std::deque< T > &	aList,
		INSPECTOR	inspector,
		void *	testData,
		const std::vector< KICAD_T > &	scanTypes
	)

inlinestaticinherited

This changes first parameter to avoid the DList and use the main queue instead.

Definition at line 296 of file eda_item.h.

References EDA_ITEM::Visit().

Referenced by GERBER_FILE_IMAGE::Visit().

◆ IterateForward() [2/2]

template<class T >

static INSPECT_RESULT EDA_ITEM::IterateForward	(	std::vector< T > &	aList,
		INSPECTOR	inspector,
		void *	testData,
		const std::vector< KICAD_T > &	scanTypes
	)

inlinestaticinherited

Change first parameter to avoid the DList and use std::vector instead.

Definition at line 316 of file eda_item.h.

References EDA_ITEM::Visit().

◆ layerMaskDescribe()

wxString BOARD_ITEM::layerMaskDescribe ( ) const

protectedvirtual

Return a string (to be shown to the user) describing a layer mask.

Reimplemented in PCB_VIA.

Definition at line 166 of file board_item.cpp.

References _, LSET::AllCuMask(), LSET::AllTechMask(), GetBoard(), BOARD::GetCopperLayerCount(), BOARD::GetEnabledLayers(), BOARD::GetLayerName(), GetLayerSet(), PCB_LAYER_ID_COUNT, and PCBNEW_LAYER_ID_START.

Referenced by PAD::GetItemDescription(), PCB_TUNING_PATTERN::GetMsgPanelInfo(), PAD::GetMsgPanelInfo(), and PCB_TRACK::GetMsgPanelInfo().

◆ Matches() [1/2]

virtual bool EDA_ITEM::Matches	(	const EDA_SEARCH_DATA &	aSearchData,
		void *	aAuxData
	)		const

inlinevirtualinherited

Compare the item against the search criteria in aSearchData.

The base class returns false since many of the objects derived from EDA_ITEM do not have any text to search.

Parameters

aSearchData	A reference to a wxFindReplaceData object containing the search criteria.
aAuxData	A pointer to optional data required for the search or NULL if not used.

Returns: True if the item's text matches the search criteria in aSearchData.

Reimplemented in SCH_MARKER, SCH_FIELD, SCH_LABEL_BASE, SCH_PIN, SCH_SHEET, SCH_SHEET_PIN, SCH_SYMBOL, SCH_TABLE, SCH_TEXT, SCH_TEXTBOX, NETINFO_ITEM, PCB_MARKER, PCB_TABLE, PCB_TEXT, PCB_TEXTBOX, and ZONE.

Definition at line 377 of file eda_item.h.

Referenced by SYMBOL_EDITOR_DRAWING_TOOLS::doDrawShape(), SCH_DRAWING_TOOLS::DrawShape(), SCH_FIND_REPLACE_TOOL::HasMatch(), SCH_MARKER::Matches(), SCH_FIELD::Matches(), SCH_LABEL_BASE::Matches(), SCH_PIN::Matches(), SCH_SHEET_PIN::Matches(), SCH_TEXT::Matches(), SCH_TEXTBOX::Matches(), NETINFO_ITEM::Matches(), PCB_MARKER::Matches(), PCB_TEXT::Matches(), PCB_TEXTBOX::Matches(), ZONE::Matches(), TEXT_SEARCH_HANDLER::Search(), SCH_DRAWING_TOOLS::TwoClickPlace(), SYMBOL_EDITOR_DRAWING_TOOLS::TwoClickPlace(), and SCH_FIND_REPLACE_TOOL::UpdateFind().

◆ Matches() [2/2]

bool EDA_ITEM::Matches	(	const wxString &	aText,
		const EDA_SEARCH_DATA &	aSearchData
	)		const

protectedinherited

Compare aText against search criteria in aSearchData.

This is a helper function for simplify derived class logic.

Parameters

aText	A reference to a wxString object containing the string to test.
aSearchData	The criteria to search against.

Returns: True if aText matches the search criteria in aSearchData.

Definition at line 126 of file eda_item.cpp.

References CTX_SEARCH, EDA_COMBINED_MATCHER::Find(), EDA_SEARCH_DATA::findString, EDA_ITEM::IsReplaceable(), isWordChar(), EDA_SEARCH_DATA::matchCase, EDA_SEARCH_DATA::matchMode, next(), EDA_SEARCH_DATA::searchAndReplace, and text.

◆ Mirror()

void BOARD_ITEM::Mirror	(	const VECTOR2I &	aCentre,
		FLIP_DIRECTION	aFlipDirection
	)

virtual

Mirror this object relative to a given horizontal axis the layer is not changed.

Parameters

aCentre	the mirror point.
aMirrorAroundXAxis	mirror across X axis instead of Y (the default).

Reimplemented in PCB_TUNING_PATTERN, PCB_GROUP, PCB_SHAPE, PCB_TEXT, PCB_TEXTBOX, PCB_TRACK, PCB_ARC, PCB_GENERATOR, ZONE, PCB_DIMENSION_BASE, PCB_DIM_ALIGNED, and PCB_DIM_ORTHOGONAL.

Definition at line 367 of file board_item.cpp.

References EDA_ITEM::GetClass().

◆ Move()

virtual void BOARD_ITEM::Move ( const VECTOR2I & aMoveVector )

inlinevirtual

Move this object.

Parameters

aMoveVector the move vector for this object.

Reimplemented in BOARD, FOOTPRINT, PCB_TUNING_PATTERN, PAD, PCB_GENERATOR, PCB_GROUP, PCB_MARKER, PCB_REFERENCE_IMAGE, PCB_SHAPE, PCB_TABLE, PCB_TARGET, PCB_TEXT, PCB_TEXTBOX, PCB_TRACK, PCB_ARC, PCB_DIMENSION_BASE, and ZONE.

Definition at line 342 of file board_item.h.

References EDA_ITEM::GetClass().

Referenced by ALIGN_DISTRIBUTE_TOOL::AlignBottom(), ALIGN_DISTRIBUTE_TOOL::AlignCenterX(), ALIGN_DISTRIBUTE_TOOL::AlignCenterY(), ALIGN_DISTRIBUTE_TOOL::AlignTop(), MULTICHANNEL_TOOL::copyRuleAreaContents(), ALIGN_DISTRIBUTE_TOOL::doAlignLeft(), ALIGN_DISTRIBUTE_TOOL::doAlignRight(), EDIT_TOOL::doMoveSelection(), ROUTER_TOOL::InlineDrag(), BOARD::Move(), EDIT_TOOL::MoveExact(), POSITION_RELATIVE_TOOL::PositionRelativeInteractively(), POSITION_RELATIVE_TOOL::RelativeItemSelectionMove(), and TransformItem().

◆ Normalize()

virtual void BOARD_ITEM::Normalize ( )

inlinevirtual

Perform any normalization required after a user rotate and/or flip.

Reimplemented in PCB_SHAPE, and PCB_TABLE.

Definition at line 373 of file board_item.h.

Referenced by EDIT_TOOL::Flip(), NormalizeForCompare(), and EDIT_TOOL::Rotate().

◆ NormalizeForCompare()

virtual void BOARD_ITEM::NormalizeForCompare ( )

inlinevirtual

Perform any normalization required to compare 2 graphics, especially if the can be rotated and/or flipped.

Similar to Normalize(), but more changes can be made

Reimplemented in PCB_SHAPE.

Definition at line 380 of file board_item.h.

References Normalize().

◆ operator<()

bool EDA_ITEM::operator< ( const EDA_ITEM & aItem ) const

inherited

Test if another item is less than this object.

Parameters

aItem - Item to compare against.

Returns: - True if aItem is less than the item.

Definition at line 252 of file eda_item.cpp.

References EDA_ITEM::GetClass().

◆ operator==()

virtual bool BOARD_ITEM::operator== ( const BOARD_ITEM & aItem ) const

pure virtual

Implemented in DELETED_BOARD_ITEM, NETINFO_ITEM, PAD, PCB_DIMENSION_BASE, PCB_GROUP, PCB_MARKER, PCB_REFERENCE_IMAGE, PCB_SHAPE, PCB_TABLE, PCB_TABLECELL, PCB_TARGET, PCB_TEXT, PCB_TEXTBOX, PCB_ARC, BOARD, FOOTPRINT, PCB_FIELD, PCB_TRACK, PCB_VIA, and ZONE.

◆ RenderAsBitmap()

virtual bool EDA_ITEM::RenderAsBitmap ( double aWorldScale ) const

inlinevirtualinherited

Reimplemented in SCH_ITEM.

Definition at line 158 of file eda_item.h.

◆ Replace() [1/2]

virtual bool EDA_ITEM::Replace	(	const EDA_SEARCH_DATA &	aSearchData,
		void *	aAuxData = `nullptr`
	)

inlinevirtualinherited

Perform a text replace using the find and replace criteria in aSearchData on items that support text find and replace.

This function must be overridden for items that support text replace.

Parameters

aSearchData	A reference to a wxFindReplaceData object containing the search and replace criteria.
aAuxData	A pointer to optional data required for the search or NULL if not used.

Returns: True if the item text was modified, otherwise false.

Reimplemented in SCH_LABEL_BASE, SCH_PIN, SCH_TEXT, SCH_TEXTBOX, SCH_FIELD, and SCH_SHEET_PIN.

Definition at line 404 of file eda_item.h.

◆ Replace() [2/2]

bool EDA_ITEM::Replace	(	const EDA_SEARCH_DATA &	aSearchData,
		wxString &	aText
	)

staticinherited

Perform a text replace on aText using the find and replace criteria in aSearchData on items that support text find and replace.

Parameters

aSearchData	A reference to a wxFindReplaceData object containing the search and replace criteria.
aText	A reference to a wxString object containing the text to be replaced.

Returns: True if aText was modified, otherwise false.

Definition at line 189 of file eda_item.cpp.

References EDA_SEARCH_DATA::findString, isWordChar(), EDA_SEARCH_DATA::matchCase, EDA_SEARCH_DATA::matchMode, next(), EDA_SEARCH_DATA::replaceString, and text.

Referenced by EDA_TEXT::Replace(), SCH_FIELD::Replace(), SCH_FIND_REPLACE_TOOL::ReplaceAll(), and SCH_FIND_REPLACE_TOOL::ReplaceAndFindNext().

◆ Rotate()

void BOARD_ITEM::Rotate	(	const VECTOR2I &	aRotCentre,
		const EDA_ANGLE &	aAngle
	)

virtual

Rotate this object.

Parameters

aRotCentre the rotation center point.

Reimplemented in PCB_REFERENCE_IMAGE, ZONE, FOOTPRINT, PCB_TUNING_PATTERN, PAD, PCB_DIMENSION_BASE, PCB_DIM_ORTHOGONAL, PCB_GENERATOR, PCB_GROUP, PCB_MARKER, PCB_SHAPE, PCB_TABLE, PCB_TARGET, PCB_TEXT, PCB_TEXTBOX, PCB_TRACK, and PCB_ARC.

Definition at line 355 of file board_item.cpp.

References EDA_ITEM::GetClass().

Referenced by EDIT_TOOL::MoveExact(), EDIT_TOOL::Rotate(), and TransformItem().

◆ RunOnChildren()

virtual void BOARD_ITEM::RunOnChildren ( const std::function< void(BOARD_ITEM *)> & aFunction ) const

inlinevirtual

Invoke a function on all children.

Note: This function should not add or remove items to the parent.

Reimplemented in FOOTPRINT, PCB_GROUP, and PCB_TABLE.

Definition at line 206 of file board_item.h.

Referenced by BOARD_COMMIT::dirtyIntersectingZones(), PCB_IO_KICAD_SEXPR_PARSER::resolveGroups(), KIGFX::PCB_VIEW::Update(), and PCB_SELECTION::updateDrawList().

◆ RunOnDescendants()

virtual void BOARD_ITEM::RunOnDescendants	(	const std::function< void(BOARD_ITEM *)> &	aFunction,
		int	aDepth = `0`
	)		const

inlinevirtual

Invoke a function on all descendants.

Note: This function should not add or remove items.

Reimplemented in FOOTPRINT, and PCB_GROUP.

Definition at line 212 of file board_item.h.

Referenced by BOARD_INSPECTION_TOOL::calculateSelectionRatsnest(), EDIT_TOOL::DeleteItems(), EDIT_TOOL::Duplicate(), PCB_BASE_FRAME::FocusOnItems(), PCB_SELECTION_TOOL::highlightInternal(), PCB_TEST_SELECTION_TOOL::highlightInternal(), ARRAY_TOOL::onDialogClosed(), BOARD_COMMIT::Push(), PCB_GRID_HELPER::queryVisible(), PCB_SELECTION_TOOL::RequestSelection(), PCB_SELECTION_TOOL::unhighlightInternal(), and PCB_TEST_SELECTION_TOOL::unhighlightInternal().

◆ Serialize()

void SERIALIZABLE::Serialize ( google::protobuf::Any & aContainer ) const

virtualinherited

Serializes this object to the given Any message.

The Any message's concrete type will be specific to the object in question.

Parameters

aContainer will be filled with a message describing this object

Reimplemented in SCH_LABEL, SCH_DIRECTIVE_LABEL, SCH_GLOBALLABEL, SCH_HIERLABEL, SCH_LINE, EDA_SHAPE, EDA_TEXT, BOARD_STACKUP, FOOTPRINT, PAD, PADSTACK, PCB_DIMENSION_BASE, PCB_DIM_ALIGNED, PCB_DIM_ORTHOGONAL, PCB_DIM_RADIAL, PCB_DIM_LEADER, PCB_DIM_CENTER, PCB_FIELD, PCB_SHAPE, PCB_TEXT, PCB_TEXTBOX, PCB_TRACK, PCB_ARC, PCB_VIA, and ZONE.

Definition at line 24 of file serializable.cpp.

Referenced by API_HANDLER_SCH::handleCreateUpdateItemsInternal(), and API_HANDLER_PCB::handleCreateUpdateItemsInternal().

◆ Set() [1/3]

template<typename T >

bool INSPECTABLE::Set	(	const wxString &	aProperty,
		T	aValue,
		bool	aNotify = `true`
	)

inlineinherited

Definition at line 76 of file inspectable.h.

References PROPERTY_MANAGER::GetProperty(), PROPERTY_MANAGER::Instance(), PROPERTY_BASE::OwnerHash(), PROPERTY_MANAGER::PropertyChanged(), PROPERTY_BASE::set(), TYPE_HASH, and PROPERTY_MANAGER::TypeCast().

◆ Set() [2/3]

template<typename T >

bool INSPECTABLE::Set	(	PROPERTY_BASE *	aProperty,
		T	aValue,
		bool	aNotify = `true`
	)

inlineinherited

Definition at line 59 of file inspectable.h.

References PROPERTY_MANAGER::Instance(), PROPERTY_BASE::OwnerHash(), PROPERTY_MANAGER::PropertyChanged(), PROPERTY_BASE::set(), TYPE_HASH, and PROPERTY_MANAGER::TypeCast().

◆ Set() [3/3]

bool INSPECTABLE::Set	(	PROPERTY_BASE *	aProperty,
		wxAny &	aValue,
		bool	aNotify = `true`
	)

inlineinherited

Definition at line 42 of file inspectable.h.

References PROPERTY_MANAGER::Instance(), PROPERTY_BASE::OwnerHash(), PROPERTY_MANAGER::PropertyChanged(), PROPERTY_BASE::setter(), TYPE_HASH, and PROPERTY_MANAGER::TypeCast().

Referenced by SCH_PROPERTIES_PANEL::valueChanged(), and PCB_PROPERTIES_PANEL::valueChanged().

◆ SetBrightened()

void EDA_ITEM::SetBrightened ( )

inlineinherited

Definition at line 120 of file eda_item.h.

References BRIGHTENED, and EDA_ITEM::SetFlags().

Referenced by KIGFX::SCH_PAINTER::draw(), SCH_EDIT_FRAME::FocusOnItem(), SYMBOL_EDIT_FRAME::FocusOnItem(), PCB_BASE_FRAME::FocusOnItems(), PL_SELECTION_TOOL::highlight(), EE_SELECTION_TOOL::highlight(), PCB_SELECTION_TOOL::highlightInternal(), PCB_TEST_SELECTION_TOOL::highlightInternal(), and SCH_EDITOR_CONTROL::UpdateNetHighlighting().

◆ SetFlags()

void EDA_ITEM::SetFlags ( EDA_ITEM_FLAGS aMask )

inlineinherited

Definition at line 127 of file eda_item.h.

References EDA_ITEM::m_flags.

◆ SetForcedTransparency()

void KIGFX::VIEW_ITEM::SetForcedTransparency ( double aForcedTransparency )

inlineinherited

Definition at line 153 of file view_item.h.

Referenced by EDA_ITEM::EDA_ITEM(), SYMBOL_DIFF_WIDGET::onSlider(), FOOTPRINT_DIFF_WIDGET::onSlider(), and EDA_ITEM::operator=().

◆ SetForceVisible()

void EDA_ITEM::SetForceVisible ( bool aEnable )

inlineinherited

Set and clear force visible flag used to force the item to be drawn even if it's draw attribute is set to not visible.

Parameters

aEnable True forces the item to be drawn. False uses the item's visibility setting to determine if the item is to be drawn.

Definition at line 194 of file eda_item.h.

References EDA_ITEM::m_forceVisible.

Referenced by SCH_FIND_REPLACE_TOOL::FindNext(), and SCH_FIND_REPLACE_TOOL::UpdateFind().

◆ SetFPRelativePosition()

void BOARD_ITEM::SetFPRelativePosition ( const VECTOR2I & aPos )

Definition at line 341 of file board_item.cpp.

References GetParentFootprint(), RotatePoint(), and EDA_ITEM::SetPosition().

Referenced by PCAD2KICAD::PCAD_FOOTPRINT::AddToBoard(), PCB_IO_KICAD_LEGACY::loadMODULE_TEXT(), DIALOG_FOOTPRINT_PROPERTIES::OnAddField(), processTextItem(), and PCB_FIELDS_GRID_TABLE::SetValue().

◆ SetIsKnockout()

virtual void BOARD_ITEM::SetIsKnockout ( bool aKnockout )

inlinevirtual

Definition at line 325 of file board_item.h.

References m_isKnockout.

Referenced by ZONE_FILLER::addKnockout(), ALTIUM_PCB::ConvertTexts6ToBoardItemOnLayer(), ALTIUM_PCB::ConvertTexts6ToFootprintItemOnLayer(), MULTICHANNEL_TOOL::copyRuleAreaContents(), PCB_TEXT::Deserialize(), PCB_IO_KICAD_SEXPR_PARSER::parsePCB_TEXT_effects(), PCB_TEXT_DESC::PCB_TEXT_DESC(), and PCB_FIELDS_GRID_TABLE::SetValueAsBool().

◆ SetIsShownAsBitmap()

void EDA_ITEM::SetIsShownAsBitmap ( bool aBitmap )

inlineinherited

Definition at line 160 of file eda_item.h.

References EDA_ITEM::ClearFlags(), IS_SHOWN_AS_BITMAP, and EDA_ITEM::SetFlags().

◆ SetLayer()

virtual void BOARD_ITEM::SetLayer ( PCB_LAYER_ID aLayer )

inlinevirtual

Set the layer this item is on.

This method is virtual because some items (in fact: class DIMENSION) have a slightly different initialization.

Parameters

aLayer The layer number.

Reimplemented in PCB_GENERATOR, PCB_GROUP, PCB_SHAPE, PCB_VIA, and ZONE.

Definition at line 288 of file board_item.h.

References m_layer.

Referenced by CADSTAR_PCB_ARCHIVE_LOADER::addAttribute(), PCAD2KICAD::PCAD_FOOTPRINT::AddToBoard(), PCAD2KICAD::PCAD_LINE::AddToBoard(), PCAD2KICAD::PCAD_TEXT::AddToBoard(), CADSTAR_PCB_ARCHIVE_LOADER::applyDimensionSettings(), BOARD_CONNECTED_ITEM_DESC::BOARD_CONNECTED_ITEM_DESC(), BOARD_ITEM_DESC::BOARD_ITEM_DESC(), BOOST_AUTO_TEST_CASE(), ALTIUM_PCB::ConvertTexts6ToBoardItemOnLayer(), ALTIUM_PCB::ConvertTexts6ToFootprintItemOnLayer(), PNS_KICAD_IFACE::createBoardItem(), PCB_BASE_FRAME::CreateNewFootprint(), BOARD_ADAPTER::createTrackWithMargin(), FOOTPRINT::Deserialize(), PAD::Deserialize(), PCB_DIMENSION_BASE::Deserialize(), PCB_FIELD::Deserialize(), PCB_TEXT::Deserialize(), PCB_TRACK::Deserialize(), PCB_ARC::Deserialize(), EDIT_TOOL::DragArcTrack(), CADSTAR_PCB_ARCHIVE_LOADER::drawCadstarText(), DRAWING_TOOL::DrawDimension(), DRAWING_TOOL::DrawTable(), EDIT_TOOL::FilletTracks(), PCB_IO_EASYEDAPRO_PARSER::fillFootprintModelInfo(), FOOTPRINT::Flip(), PCB_DIMENSION_BASE::Flip(), PCB_TABLE::Flip(), PCB_TARGET::Flip(), PCB_TEXT::Flip(), PCB_TRACK::Flip(), PCB_ARC::Flip(), FOOTPRINT::FOOTPRINT(), PNS_PCBNEW_RULE_RESOLVER::getBoardItem(), DRAWING_TOOL::InteractivePlaceWithPreview(), FABMASTER::loadEtch(), PCB_IO_KICAD_LEGACY::loadFOOTPRINT(), FABMASTER::loadFootprints(), PCB_IO_KICAD_LEGACY::loadMODULE_TEXT(), PCB_IO_KICAD_LEGACY::loadPCB_TEXT(), PCB_IO_EAGLE::loadPlain(), PCB_IO_EAGLE::loadSignals(), PCB_IO_KICAD_LEGACY::loadTrackList(), main(), DSN::SPECCTRA_DB::makeTRACK(), CADSTAR_PCB_ARCHIVE_LOADER::makeTracksFromShapes(), DIALOG_FOOTPRINT_PROPERTIES::OnAddField(), DIALOG_FOOTPRINT_PROPERTIES_FP_EDITOR::OnAddField(), PCB_IO_EAGLE::packageText(), PCB_IO_KICAD_SEXPR_PARSER::parseFOOTPRINT_unchecked(), PCB_IO_KICAD_SEXPR_PARSER::parsePCB_TEXT_effects(), PCB_IO_EASYEDA_PARSER::ParseToBoardItemContainer(), PCB_MARKER::PCB_MARKER(), PCB_REFERENCE_IMAGE_DESC::PCB_REFERENCE_IMAGE_DESC(), PCB_TEXT::PCB_TEXT(), DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS::processItem(), DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS::processItem(), processTextItem(), CLIPBOARD_IO::SaveSelection(), PCB_SHAPE::SetLayer(), SetLayerSet(), PCB_TRACK::SetLayerSet(), FABMASTER::setupText(), PCB_FIELDS_GRID_TABLE::SetValueAsLong(), EDIT_TOOL::Swap(), DRC_TEST_PROVIDER_CREEPAGE::testCreepage(), DIALOG_REFERENCE_IMAGE_PROPERTIES::TransferDataFromWindow(), DIALOG_TRACK_VIA_PROPERTIES::TransferDataFromWindow(), DIALOG_DIMENSION_PROPERTIES::updateDimensionFromDialog(), BOARD_NETLIST_UPDATER::updateFootprintParameters(), and ROUTER_TOOL::updateSizesAfterRouterEvent().

◆ SetLayerSet()

virtual void BOARD_ITEM::SetLayerSet ( const LSET & aLayers )

inlinevirtual

Reimplemented in PAD, PCB_SHAPE, PCB_TRACK, PCB_VIA, and ZONE.

Definition at line 265 of file board_item.h.

References LSET::Seq(), and SetLayer().

Referenced by SCOPED_LAYERSET::Add(), GLOBAL_EDIT_TOOL::swapBoardItem(), PANEL_SETUP_LAYERS::TransferDataFromWindow(), and SCOPED_LAYERSET::~SCOPED_LAYERSET().

◆ SetLocked()

virtual void BOARD_ITEM::SetLocked ( bool aLocked )

inlinevirtual

Reimplemented in PCB_GROUP, and FOOTPRINT.

Definition at line 328 of file board_item.h.

References m_isLocked.

Referenced by BOARD_ITEM_DESC::BOARD_ITEM_DESC(), PAD::Deserialize(), PCB_DIMENSION_BASE::Deserialize(), PCB_SHAPE::Deserialize(), PCB_TEXT::Deserialize(), PCB_TEXTBOX::Deserialize(), PCB_TRACK::Deserialize(), PCB_ARC::Deserialize(), PCB_VIA::Deserialize(), EDIT_TOOL::DragArcTrack(), ZONE_SETTINGS::ExportSetting(), EDIT_TOOL::FilletTracks(), ROUTER_TOOL::InlineDrag(), FOOTPRINT_EDIT_FRAME::LoadFootprintFromBoard(), CADSTAR_PCB_ARCHIVE_LOADER::loadNetTracks(), DSN::SPECCTRA_DB::makeTRACK(), CADSTAR_PCB_ARCHIVE_LOADER::makeTracksFromShapes(), BOARD_EDITOR_CONTROL::modifyLockSelected(), PCB_IO_KICAD_SEXPR_PARSER::Parse(), PCB_IO_KICAD_SEXPR_PARSER::parsePCB_TEXT_effects(), PCB_IO_KICAD_SEXPR_PARSER::parseTextBoxContent(), processTextItem(), CLIPBOARD_IO::SaveSelection(), PCB_GROUP::SetLocked(), DIALOG_REFERENCE_IMAGE_PROPERTIES::TransferDataFromWindow(), DIALOG_TEXTBOX_PROPERTIES::TransferDataFromWindow(), and DIALOG_TRACK_VIA_PROPERTIES::TransferDataFromWindow().

◆ SetModified()

void EDA_ITEM::SetModified ( )

inherited

Definition at line 67 of file eda_item.cpp.

References IS_CHANGED, EDA_ITEM::m_parent, EDA_ITEM::SetFlags(), and EDA_ITEM::SetModified().

Referenced by PCB_EDIT_FRAME::OpenProjectFiles(), ALTIUM_PCB::Parse(), SCH_IO_ALTIUM::ParseASCIISchematic(), SCH_IO_ALTIUM::ParseFileHeader(), and EDA_ITEM::SetModified().

◆ SetParent()

virtual void EDA_ITEM::SetParent ( EDA_ITEM * aParent )

inlinevirtualinherited

Reimplemented in LIB_SYMBOL, and NETINFO_ITEM.

Definition at line 104 of file eda_item.h.

References EDA_ITEM::m_parent.

Referenced by BOARD::Add(), FOOTPRINT::Add(), PCB_TABLE::AddCell(), SCH_TABLE::AddCell(), LIB_SYMBOL::AddDrawItem(), FOOTPRINT_VIEWER_FRAME::AddFootprintToPCB(), BOARD_NETLIST_UPDATER::addNewFootprint(), SCH_SHEET::AddPin(), PAD::AddPrimitive(), PADSTACK::AddPrimitive(), PAD::AddPrimitivePoly(), SYMBOL_EDITOR_CONTROL::AddSymbolToSchematic(), SCH_SCREEN::Append(), BOOST_AUTO_TEST_CASE(), CADSTAR_SCH_ARCHIVE_LOADER::copySymbolItems(), SYMBOL_EDIT_FRAME::CreateNewSymbol(), SCH_DRAWING_TOOLS::createNewText(), PANEL_EESCHEMA_COLOR_SETTINGS::createPreviewItems(), DIALOG_DIMENSION_PROPERTIES::DIALOG_DIMENSION_PROPERTIES(), DIALOG_PAD_PROPERTIES::DIALOG_PAD_PROPERTIES(), DIALOG_PIN_PROPERTIES::DIALOG_PIN_PROPERTIES(), SYMBOL_EDITOR_DRAWING_TOOLS::doDrawShape(), PCBNEW_JOBS_HANDLER::doFpExportSvg(), SCH_LINE_WIRE_BUS_TOOL::doUnfoldBus(), SCH_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawTable(), PCB_EDIT_FRAME::ExchangeFootprint(), PAD_TOOL::explodePad(), LIB_SYMBOL::Flatten(), PCB_IO_KICAD_SEXPR::FootprintSave(), DISPLAY_FOOTPRINTS_FRAME::GetFootprint(), CADSTAR_SCH_ARCHIVE_LOADER::getKiCadSchText(), PCB_TABLE::InsertCell(), SCH_TABLE::InsertCell(), LIB_SYMBOL::LIB_SYMBOL(), LTSPICE_SCHEMATIC::Load(), SCH_IO_KICAD_LEGACY_LIB_CACHE::loadAliases(), CADSTAR_SCH_ARCHIVE_LOADER::loadChildSheets(), FOOTPRINT_EDIT_FRAME::LoadFootprintFromBoard(), SCH_IO_KICAD_SEXPR::loadHierarchy(), SCH_IO_KICAD_LEGACY::loadHierarchy(), KI_TEST::LoadHierarchy(), SCH_IO_EAGLE::loadSymbolCircle(), SCH_IO_EAGLE::loadSymbolPolyLine(), SCH_IO_EAGLE::loadSymbolRectangle(), SCH_IO_EAGLE::loadSymbolWire(), PCB_POINT_EDITOR::OnSelectionChange(), LIB_SYMBOL::operator=(), SCH_IO_KICAD_SEXPR_PARSER::parseLibSymbol(), SCH_IO_KICAD_SEXPR_PARSER::ParseSchematic(), SCH_EDITOR_CONTROL::Paste(), SYMBOL_EDITOR_EDIT_TOOL::Paste(), PCB_CONTROL::Paste(), pasteFootprintItemsToFootprintEditor(), BOARD_EDITOR_CONTROL::PlaceFootprint(), BACK_ANNOTATE::processNetNameChange(), PAD::Recombine(), SCH_IO_LIB_CACHE::removeSymbol(), SCH_EDIT_TOOL::RepeatDrawItem(), SaveCopyOfZones(), FOOTPRINT_EDIT_FRAME::SaveFootprintToBoard(), CLIPBOARD_IO::SaveSelection(), SCH_SHEET_PIN::SCH_SHEET_PIN(), LIB_SYMBOL::SetFields(), SCH_DRAWING_TOOLS::SingleClickPlace(), SCH_LINE_WIRE_BUS_TOOL::startSegments(), FOOTPRINT::swapData(), PCB_TABLE::swapData(), SCH_LABEL_BASE::SwapData(), SCH_SHEET::SwapData(), SCH_SYMBOL::SwapData(), SCH_TABLE::SwapData(), SwapItemData(), SCH_SYMBOL::SyncOtherUnits(), and SCH_DRAWING_TOOLS::TwoClickPlace().

◆ SetParentGroup()

void BOARD_ITEM::SetParentGroup ( PCB_GROUP * aGroup )

inline

◆ SetPosition()

virtual void EDA_ITEM::SetPosition ( const VECTOR2I & aPos )

inlinevirtualinherited

Reimplemented in DELETED_SHEET_ITEM, DELETED_BOARD_ITEM, PCB_GROUP, PCB_VIA, SCH_PIN, SCH_SHAPE, SCH_TABLE, GERBER_DRAW_ITEM, DS_DRAW_ITEM_LINE, DS_DRAW_ITEM_POLYPOLYGONS, DS_DRAW_ITEM_RECT, DS_DRAW_ITEM_PAGE, DS_DRAW_ITEM_TEXT, DS_DRAW_ITEM_BITMAP, BOARD, FOOTPRINT, TUNING_STATUS_VIEW_ITEM, NETINFO_ITEM, PAD, PCB_DIMENSION_BASE, PCB_GENERATOR, PCB_MARKER, PCB_SHAPE, PCB_TABLE, PCB_TARGET, PCB_TEXT, PCB_TRACK, PCB_ARC, ROUTER_STATUS_VIEW_ITEM, ZONE, SCH_BITMAP, SCH_BUS_ENTRY_BASE, SCH_FIELD, SCH_JUNCTION, SCH_LABEL_BASE, SCH_LINE, SCH_MARKER, SCH_NO_CONNECT, SCH_SHEET, SCH_SHEET_PIN, SCH_SYMBOL, SCH_TEXT, KIGFX::ORIGIN_VIEWITEM, and PCB_REFERENCE_IMAGE.

Definition at line 244 of file eda_item.h.

Referenced by BOARD_EDITOR_CONTROL::DoSetDrillOrigin(), PCB_CONTROL::DoSetGridOrigin(), DRAWING_TOOL::DrawVia(), PL_DRAWING_TOOLS::PlaceItem(), PAD_TOOL::PlacePad(), SetFPRelativePosition(), SetX(), SetY(), SCH_DRAWING_TOOLS::SingleClickPlace(), SCH_EDIT_TOOL::Swap(), SYMBOL_EDITOR_EDIT_TOOL::Swap(), EDIT_TOOL::Swap(), SCH_DRAWING_TOOLS::TwoClickPlace(), and SYMBOL_EDITOR_DRAWING_TOOLS::TwoClickPlace().

◆ SetSelected()

void EDA_ITEM::SetSelected ( )

inlineinherited

Definition at line 119 of file eda_item.h.

References SELECTED, and EDA_ITEM::SetFlags().

Referenced by PANEL_EESCHEMA_COLOR_SETTINGS::createPreviewItems(), KIGFX::SCH_PAINTER::draw(), PL_SELECTION_TOOL::highlight(), EE_SELECTION_TOOL::highlight(), PCB_SELECTION_TOOL::highlightInternal(), PCB_TEST_SELECTION_TOOL::highlightInternal(), SCH_LINE::MergeOverlap(), DS_PROXY_UNDO_ITEM::Restore(), EE_TOOL_BASE< T >::saveCopyInUndoList(), GERBVIEW_SELECTION_TOOL::selectVisually(), and SCH_COMMIT::Stage().

◆ SetStroke()

void BOARD_ITEM::SetStroke ( const STROKE_PARAMS & aStroke )

virtual

Reimplemented in PCB_SHAPE.

Definition at line 94 of file board_item.cpp.

References EDA_ITEM::GetClass().

◆ SetX()

void BOARD_ITEM::SetX ( int aX )

inline

Definition at line 116 of file board_item.h.

References GetY(), and EDA_ITEM::SetPosition().

Referenced by FOOTPRINT::AutoPositionFields(), and BOARD_ITEM_DESC::BOARD_ITEM_DESC().

◆ SetY()

void BOARD_ITEM::SetY ( int aY )

inline

Definition at line 122 of file board_item.h.

References GetX(), and EDA_ITEM::SetPosition().

Referenced by FOOTPRINT::AutoPositionFields(), and BOARD_ITEM_DESC::BOARD_ITEM_DESC().

◆ Similarity()

virtual double BOARD_ITEM::Similarity ( const BOARD_ITEM & aItem ) const

pure virtual

Return a measure of how likely the other object is to represent the same object.

The scale runs from 0.0 (definitely different objects) to 1.0 (same)

This is a pure virtual function. Derived classes must implement this.

Implemented in NETINFO_ITEM, PCB_MARKER, PCB_REFERENCE_IMAGE, PCB_SHAPE, PCB_TABLECELL, PCB_TARGET, PCB_TEXT, PCB_TEXTBOX, DELETED_BOARD_ITEM, BOARD, FOOTPRINT, PAD, PCB_DIMENSION_BASE, PCB_FIELD, PCB_GROUP, PCB_TABLE, PCB_TRACK, PCB_ARC, PCB_VIA, and ZONE.

◆ Sort()

static bool EDA_ITEM::Sort	(	const EDA_ITEM *	aLeft,
		const EDA_ITEM *	aRight
	)

inlinestaticinherited

Helper function to be used by the C++ STL sort algorithm for sorting a STL container of EDA_ITEM pointers.

Parameters

aLeft	The left hand item to compare.
aRight	The right hand item to compare.

Returns: True if aLeft is less than aRight.

Definition at line 433 of file eda_item.h.

◆ StyleFromSettings()

virtual void BOARD_ITEM::StyleFromSettings ( const BOARD_DESIGN_SETTINGS & settings )

inlinevirtual

Reimplemented in PCB_SHAPE, PCB_TEXT, and PCB_TEXTBOX.

Definition at line 330 of file board_item.h.

◆ swapData()

void BOARD_ITEM::swapData ( BOARD_ITEM * aImage )

protectedvirtual

Reimplemented in FOOTPRINT, PCB_TUNING_PATTERN, PAD, PCB_DIM_ALIGNED, PCB_DIM_ORTHOGONAL, PCB_DIM_RADIAL, PCB_DIM_LEADER, PCB_DIM_CENTER, PCB_FIELD, PCB_GROUP, PCB_SHAPE, PCB_TABLE, PCB_TABLECELL, PCB_TARGET, PCB_TEXT, PCB_TEXTBOX, PCB_TRACK, PCB_ARC, PCB_VIA, ZONE, and PCB_REFERENCE_IMAGE.

Definition at line 220 of file board_item.cpp.

Referenced by SwapItemData().

◆ SwapItemData()

void BOARD_ITEM::SwapItemData ( BOARD_ITEM * aImage )

Swap data between aItem and aImage.

aItem and aImage should have the same type.

Used in undo and redo commands to swap values between an item and its copy. Only values like layer, size .. which are modified by editing are swapped.

Parameters

aImage the item image which contains data to swap.

Definition at line 225 of file board_item.cpp.

References GetParent(), GetParentGroup(), group, EDA_ITEM::SetParent(), SetParentGroup(), and swapData().

Referenced by API_HANDLER_PCB::handleCreateUpdateItemsInternal(), PCB_BASE_EDIT_FRAME::PutDataInPreviousState(), BOARD_COMMIT::Revert(), and UpdateCopyOfZonesList().

◆ TransformShapeToPolygon()

void BOARD_ITEM::TransformShapeToPolygon	(	SHAPE_POLY_SET &	aBuffer,
		PCB_LAYER_ID	aLayer,
		int	aClearance,
		int	aError,
		ERROR_LOC	aErrorLoc,
		bool	ignoreLineWidth = `false`
	)		const

virtual

Convert the item shape to a closed polygon.

Circles and arcs are approximated by segments.

Parameters

aBuffer	a buffer to store the polygon.
aClearance	the clearance around the pad.
aError	the maximum deviation from true circle.
aErrorLoc	should the approximation error be placed outside or inside the polygon?
ignoreLineWidth	used for edge cut items where the line width is only for visualization.

Reimplemented in PCB_DIMENSION_BASE, PCB_SHAPE, PCB_TARGET, PCB_TRACK, ZONE, PCB_TABLE, PCB_TEXT, PCB_TEXTBOX, and PAD.

Definition at line 255 of file board_item.cpp.

Referenced by DRC_TEST_PROVIDER_SOLDER_MASK::addItemToRTrees(), ZONE_FILLER::addKnockout(), FOOTPRINT::CoverageRatio(), enclosedByAreaFunc(), FOOTPRINT::GetCoverageArea(), process(), DRC_TEST_PROVIDER_CONNECTION_WIDTH::Run(), and DRC_TEST_PROVIDER_SLIVER_CHECKER::Run().

◆ Type()

KICAD_T EDA_ITEM::Type ( ) const

inlineinherited

Returns the type of object.

This attribute should never be changed after a ctor sets it, so there is no public "setter" method.

Returns: the type of object.

Definition at line 101 of file eda_item.h.

References EDA_ITEM::m_structType.

◆ ViewBBox()

const BOX2I EDA_ITEM::ViewBBox ( ) const

overridevirtualinherited

Return the bounding box of the item covering all its layers.

Returns: the current bounding box.

Implements KIGFX::VIEW_ITEM.

Reimplemented in SCH_PIN, GERBER_DRAW_ITEM, DS_PROXY_VIEW_ITEM, KIGFX::ORIGIN_VIEWITEM, KIGFX::ANCHOR_DEBUG, KIGFX::PREVIEW::ARC_ASSISTANT, KIGFX::PREVIEW::BEZIER_ASSISTANT, KIGFX::PREVIEW::CENTRELINE_RECT_ITEM, KIGFX::CONSTRUCTION_GEOM, KIGFX::PREVIEW::POLYGON_ITEM, KIGFX::PREVIEW::RULER_ITEM, KIGFX::PREVIEW::SELECTION_AREA, KIGFX::SNAP_INDICATOR, KIGFX::PREVIEW::TWO_POINT_ASSISTANT, EDIT_POINTS, FOOTPRINT, TUNING_STATUS_VIEW_ITEM, PCB_TUNING_PATTERN, PAD, PCB_DIMENSION_BASE, PCB_DIM_CENTER, PCB_MARKER, PCB_SHAPE, PCB_TEXT, PCB_TRACK, RATSNEST_VIEW_ITEM, ROUTER_PREVIEW_ITEM, ROUTER_STATUS_VIEW_ITEM, and MY_DRAWING.

Definition at line 276 of file eda_item.cpp.

References EDA_ITEM::GetBoundingBox().

Referenced by EDIT_TOOL::doMoveSelection(), GERBVIEW_FRAME::GetDocumentExtents(), EDIT_TOOL::Rotate(), and PCB_SHAPE::ViewBBox().

◆ ViewDraw()

virtual void KIGFX::VIEW_ITEM::ViewDraw	(	int	aLayer,
		VIEW *	aView
	)		const

inlinevirtualinherited

Draw the parts of the object belonging to layer aLayer.

An alternative way for drawing objects if there is no #PAINTER assigned for the view or if the PAINTER doesn't know how to paint this particular implementation of VIEW_ITEM. The preferred way of drawing is to design an appropriate PAINTER object, the method below is intended only for quick hacks and debugging purposes.

Parameters

aLayer	is the current drawing layer.
aView	is a pointer to the VIEW device we are drawing on.

Reimplemented in DS_PROXY_VIEW_ITEM, KIGFX::PREVIEW::SIMPLE_OVERLAY_ITEM, EDIT_POINTS, TUNING_STATUS_VIEW_ITEM, RATSNEST_VIEW_ITEM, ROUTER_PREVIEW_ITEM, ROUTER_STATUS_VIEW_ITEM, MY_DRAWING, KIGFX::PREVIEW::ARC_ASSISTANT, KIGFX::PREVIEW::BEZIER_ASSISTANT, KIGFX::PREVIEW::RULER_ITEM, KIGFX::PREVIEW::SELECTION_AREA, KIGFX::PREVIEW::TWO_POINT_ASSISTANT, PCB_TUNING_PATTERN, KIGFX::ORIGIN_VIEWITEM, KIGFX::ANCHOR_DEBUG, KIGFX::CONSTRUCTION_GEOM, KIGFX::SNAP_INDICATOR, KIGFX::VIEW_GROUP, and KIGFX::VIEW_OVERLAY.

Definition at line 119 of file view_item.h.

Referenced by KIGFX::VIEW::draw(), and KIGFX::VIEW::updateItemGeometry().

◆ ViewGetLayers()

std::vector< int > BOARD_ITEM::ViewGetLayers ( ) const

overridevirtual

Return the all the layers within the VIEW the object is painted on.

For instance, a PAD spans zero or more copper layers and a few technical layers. ViewDraw() or PAINTER::Draw() is repeatedly called for each of the layers returned by ViewGetLayers(), depending on the rendering order.

Reimplemented from EDA_ITEM.

Reimplemented in FOOTPRINT, PCB_TUNING_PATTERN, PAD, PCB_GROUP, PCB_MARKER, PCB_REFERENCE_IMAGE, PCB_SHAPE, PCB_TEXT, PCB_TEXTBOX, PCB_TRACK, PCB_VIA, and ZONE.

Definition at line 199 of file board_item.cpp.

References IsLocked(), LAYER_LOCKED_ITEM_SHADOW, and m_layer.

◆ ViewGetLOD()

virtual double KIGFX::VIEW_ITEM::ViewGetLOD	(	int	aLayer,
		VIEW *	aView
	)		const

inlinevirtualinherited

Return the level of detail (LOD) of the item.

A level of detail is the minimal VIEW scale that is sufficient for an item to be shown on a given layer.

Parameters

aLayer	is the current drawing layer.
aView	is a pointer to the VIEW device we are drawing on.

Returns: the level of detail. 0 always show the item, because the actual zoom level (or VIEW scale) is always > 0

Reimplemented in SCH_LINE, GERBER_DRAW_ITEM, FOOTPRINT, PAD, PCB_FIELD, PCB_GROUP, PCB_REFERENCE_IMAGE, PCB_SHAPE, PCB_TEXT, PCB_TEXTBOX, PCB_TRACK, PCB_VIA, and ZONE.

Definition at line 142 of file view_item.h.

Referenced by PCB_GRID_HELPER::computeAnchors(), PNS_KICAD_IFACE::IsItemVisible(), KIGFX::VIEW::DRAW_ITEM_VISITOR::operator()(), EE_GRID_HELPER::queryVisible(), and PCB_GRID_HELPER::queryVisible().

◆ viewPrivData()

VIEW_ITEM_DATA * KIGFX::VIEW_ITEM::viewPrivData ( ) const

inlineinherited

Definition at line 148 of file view_item.h.

Referenced by KIGFX::VIEW::Add(), KIGFX::VIEW::draw(), KIGFX::VIEW::HasItem(), KIGFX::VIEW::Hide(), KIGFX::VIEW::invalidateItem(), KIGFX::VIEW::IsHiddenOnOverlay(), KIGFX::VIEW::IsVisible(), KIGFX::VIEW::UPDATE_COLOR_VISITOR::operator()(), KIGFX::VIEW::UPDATE_DEPTH_VISITOR::operator()(), KIGFX::VIEW::DRAW_ITEM_VISITOR::operator()(), KIGFX::VIEW::RECACHE_ITEM_VISITOR::operator()(), KIGFX::VIEW::CLEAR_LAYER_CACHE_VISITOR::operator()(), KIGFX::VIEW::SetVisible(), KIGFX::VIEW::Update(), KIGFX::VIEW::updateItemColor(), KIGFX::VIEW::updateItemGeometry(), and KIGFX::VIEW::updateLayers().

◆ Visit()

INSPECT_RESULT EDA_ITEM::Visit	(	INSPECTOR	inspector,
		void *	testData,
		const std::vector< KICAD_T > &	aScanTypes
	)

virtualinherited

May be re-implemented for each derived class in order to handle all the types given by its member data.

Implementations should call inspector->Inspect() on types in aScanTypes, and may use IterateForward() to do so on lists of such data.

Parameters

inspector	An INSPECTOR instance to use in the inspection.
testData	Arbitrary data used by the inspector.
aScanTypes	Which KICAD_T types are of interest and the order in which they should be processed.

Returns: #SEARCH_RESULT SEARCH_QUIT if the Iterator is to stop the scan, else #SCAN_CONTINUE, and determined by the inspector.

Reimplemented in PCB_GROUP, LIB_SYMBOL, SCH_SHEET, SCH_SYMBOL, SCH_TABLE, GBR_LAYOUT, GERBER_DRAW_ITEM, GERBER_FILE_IMAGE, FOOTPRINT, PCB_TABLE, PCB_TRACK, SCH_LABEL_BASE, and BOARD.

Definition at line 94 of file eda_item.cpp.

References EDA_ITEM::GetClass(), and EDA_ITEM::IsType().

Referenced by PCB_TYPE_COLLECTOR::Collect(), PCB_LAYER_COLLECTOR::Collect(), GENERAL_COLLECTOR::Collect(), GERBER_COLLECTOR::Collect(), EDA_ITEM::IterateForward(), FOOTPRINT_PREVIEW_PANEL::renderFootprint(), and BOARD::UpdateUserUnits().

◆ XorFlags()

void EDA_ITEM::XorFlags ( EDA_ITEM_FLAGS aMask )

inlineinherited

Definition at line 128 of file eda_item.h.

References EDA_ITEM::m_flags.

Referenced by EE_SELECTION_TOOL::selectMultiple().

Member Data Documentation

◆ m_flags

EDA_ITEM_FLAGS EDA_ITEM::m_flags

protectedinherited

Definition at line 499 of file eda_item.h.

Referenced by EDA_ITEM::ClearFlags(), DS_DRAW_ITEM_BASE::DS_DRAW_ITEM_BASE(), SCH_PIN::GetBoundingBox(), EDA_ITEM::GetEditFlags(), EDA_ITEM::GetFlags(), PCB_TRACK::GetMsgPanelInfoBase_Common(), SCH_LINE::GetSelectedPoints(), EDA_ITEM::GetTempFlags(), EDA_ITEM::HasFlag(), SCH_FIELD::HitTest(), SCH_JUNCTION::HitTest(), SCH_LINE::HitTest(), SCH_SHAPE::HitTest(), SCH_SYMBOL::HitTest(), SCH_TEXT::HitTest(), SCH_PIN::HitTest(), ZONE::InitDataFromSrcInCopyCtor(), EDA_ITEM::IsBrightened(), SCH_ITEM::IsConnected(), EDA_ITEM::IsEntered(), EDA_ITEM::IsModified(), EDA_ITEM::IsMoving(), EDA_ITEM::IsNew(), EDA_ITEM::IsRollover(), EDA_ITEM::IsSelected(), EDA_ITEM::IsShownAsBitmap(), SCH_LINE::MirrorHorizontally(), SCH_LINE::MirrorVertically(), EDA_ITEM::operator=(), PCB_SHAPE::operator==(), SCH_LINE::Rotate(), EDA_ITEM::SetFlags(), PCB_SHAPE::Similarity(), LIB_SYMBOL::Similarity(), PCB_SHAPE::swapData(), PCB_REFERENCE_IMAGE::swapData(), SCH_ITEM::SwapFlags(), SCH_PIN::ViewBBox(), and EDA_ITEM::XorFlags().

◆ m_forcedTransparency

double KIGFX::VIEW_ITEM::m_forcedTransparency

privateinherited

Additional transparency for diff'ing items.

Definition at line 169 of file view_item.h.

Referenced by KIGFX::VIEW::DRAW_ITEM_VISITOR::operator()().

◆ m_forceVisible

bool EDA_ITEM::m_forceVisible

protectedinherited

Definition at line 501 of file eda_item.h.

Referenced by ZONE::InitDataFromSrcInCopyCtor(), EDA_ITEM::IsForceVisible(), EDA_ITEM::operator=(), PCB_SHAPE::operator==(), EDA_ITEM::SetForceVisible(), PCB_SHAPE::Similarity(), PCB_SHAPE::swapData(), and PCB_REFERENCE_IMAGE::swapData().

◆ m_group

PCB_GROUP* BOARD_ITEM::m_group

protected

Definition at line 441 of file board_item.h.

Referenced by GetParentGroup(), SetParentGroup(), and ~BOARD_ITEM().

◆ m_isBOARD_ITEM

bool KIGFX::VIEW_ITEM::m_isBOARD_ITEM

privateinherited

Definition at line 167 of file view_item.h.

◆ m_isKnockout

bool BOARD_ITEM::m_isKnockout

protected

Definition at line 437 of file board_item.h.

Referenced by IsKnockout(), PCB_SHAPE::operator==(), SetIsKnockout(), PCB_SHAPE::Similarity(), PCB_SHAPE::swapData(), and PCB_REFERENCE_IMAGE::swapData().

◆ m_isLocked

bool BOARD_ITEM::m_isLocked

protected

Definition at line 439 of file board_item.h.

Referenced by IsLocked(), PCB_SHAPE::operator==(), SetLocked(), PCB_SHAPE::Similarity(), PCB_SHAPE::swapData(), PCB_TABLE::swapData(), and PCB_REFERENCE_IMAGE::swapData().

◆ m_isSCH_ITEM

bool KIGFX::VIEW_ITEM::m_isSCH_ITEM

privateinherited

Definition at line 166 of file view_item.h.

◆ m_layer

PCB_LAYER_ID BOARD_ITEM::m_layer

protected

Definition at line 436 of file board_item.h.

Referenced by FOOTPRINT::FOOTPRINT(), PCB_VIA::GetDrillConstraint(), GetLayer(), PCB_SHAPE::GetLayer(), GetLayerName(), GetLayerSet(), PCB_SHAPE::GetLayerSet(), PCB_TRACK::GetLayerSet(), PCB_TUNING_PATTERN::GetMsgPanelInfo(), PCB_REFERENCE_IMAGE::GetMsgPanelInfo(), PAD::GetPrincipalLayer(), PCB_TRACK::GetWidthConstraint(), PCB_VIA::GetWidthConstraint(), IsOnLayer(), PCB_SHAPE::IsOnLayer(), PCB_TRACK::IsOnLayer(), IsSideSpecific(), PCB_SHAPE::IsType(), PCB_ARC::operator==(), PCB_REFERENCE_IMAGE::operator==(), PCB_SHAPE::operator==(), PCB_TARGET::operator==(), PCB_TRACK::operator==(), PCB_VIA::operator==(), PCB_DIMENSION_BASE::PCB_DIMENSION_BASE(), PCB_TARGET::PCB_TARGET(), PCB_TUNING_PATTERN::recoverBaseline(), PCB_MARKER::SerializeToString(), SetLayer(), PCB_GENERATOR::SetLayer(), PCB_REFERENCE_IMAGE::Similarity(), PCB_TRACK::Similarity(), PCB_ARC::Similarity(), PCB_VIA::Similarity(), PCB_SHAPE::swapData(), PCB_TABLE::swapData(), PCB_REFERENCE_IMAGE::swapData(), ViewGetLayers(), FOOTPRINT::ViewGetLayers(), PCB_REFERENCE_IMAGE::ViewGetLayers(), PCB_SHAPE::ViewGetLayers(), PCB_TRACK::ViewGetLayers(), FOOTPRINT::ViewGetLOD(), PCB_REFERENCE_IMAGE::ViewGetLOD(), PCB_SHAPE::ViewGetLOD(), PCB_TEXT::ViewGetLOD(), PCB_TEXTBOX::ViewGetLOD(), and PCB_TRACK::ViewGetLOD().

◆ m_parent

EDA_ITEM* EDA_ITEM::m_parent

protectedinherited

Linked list: Link (parent struct)

Definition at line 500 of file eda_item.h.

Referenced by SCH_FIELD::DoHypertextAction(), SCH_FIELD::GetBoundingBox(), SCH_FIELD::GetCanonicalName(), PCB_FIELD::GetCanonicalName(), SCH_FIELD::GetDefaultLayer(), SCH_FIELD::GetDrawRotation(), SCH_FIELD::GetMenuImage(), PAD::GetMsgPanelInfo(), PCB_DIMENSION_BASE::GetMsgPanelInfo(), SCH_FIELD::GetName(), PCB_FIELD::GetName(), SCH_SHEET_PIN::GetParent(), GetParent(), EDA_ITEM::GetParent(), GetParentAsString(), SCH_FIELD::GetParentPosition(), SCH_FIELD::GetPosition(), SCH_FIELD::GetShownText(), SCH_FIELD::HitTest(), SCH_FIELD::IsMandatory(), SCH_FIELD::IsReplaceable(), SCH_PIN::IsStacked(), SCH_FIELD::Matches(), EDA_ITEM::operator=(), PAD::operator==(), PAD::PAD(), SCH_FIELD::Plot(), SCH_LABEL_BASE::Plot(), SCH_FIELD::Print(), SCH_FIELD::Replace(), SCH_LABEL_BASE::ResolveTextVar(), SCH_SYMBOL::SCH_SYMBOL(), SCH_FIELD::SetId(), EDA_ITEM::SetModified(), EDA_ITEM::SetParent(), SCH_FIELD::SetPosition(), PAD::Similarity(), PCB_SHAPE::swapData(), and PCB_REFERENCE_IMAGE::swapData().

◆ m_structType

KICAD_T EDA_ITEM::m_structType

privateinherited

Run time identification, keep private so it can never be changed after a ctor sets it.

See comment near SetType() regarding virtual functions.

Definition at line 496 of file eda_item.h.

Referenced by EDA_ITEM::IsType(), EDA_ITEM::operator=(), and EDA_ITEM::Type().

◆ m_Uuid

const KIID EDA_ITEM::m_Uuid

inherited

Definition at line 489 of file eda_item.h.

◆ m_viewPrivData

VIEW_ITEM_DATA* KIGFX::VIEW_ITEM::m_viewPrivData

privateinherited

Definition at line 168 of file view_item.h.

Referenced by KIGFX::VIEW::Add(), KIGFX::VIEW::OnDestroy(), KIGFX::VIEW::Remove(), KIGFX::VIEW::updateBbox(), KIGFX::VIEW::updateLayers(), and KIGFX::VIEW_ITEM::~VIEW_ITEM().

◆ ZeroOffset

VECTOR2I BOARD_ITEM::ZeroOffset

static

A value of wxPoint(0,0) which can be passed to the Draw() functions.

Definition at line 180 of file board_item.h.

Referenced by BOARD::GetPosition().

The documentation for this class was generated from the following files:

Classes

Public Types

Public Member Functions

Static Public Member Functions

Public Attributes

Static Public Attributes

Protected Member Functions

Protected Attributes

Private Attributes

Detailed Description

Member Enumeration Documentation

◆ COMPARE_FLAGS

Constructor & Destructor Documentation

◆ BOARD_ITEM()

◆ ~BOARD_ITEM()

Member Function Documentation

◆ BoardCopperLayerCount()

◆ BoardLayerCount()

◆ BoardLayerSet()

◆ ClearBrightened()

◆ ClearEditFlags()

◆ ClearFlags()

◆ ClearSelected()

◆ ClearTempFlags()

◆ Clone()

◆ DeleteStructure()

◆ Deserialize()

◆ Duplicate()

◆ Flip()

◆ Get() [1/3]

◆ Get() [2/3]

◆ Get() [3/3]

◆ GetBoard() [1/2]

◆ GetBoard() [2/2]

◆ GetBoundingBox()

◆ GetCenter()

◆ GetClass()

◆ GetEditFlags()

◆ GetEffectiveHoleShape()

◆ GetEffectiveShape()

◆ GetEmbeddedFiles()

◆ GetFlags()

◆ GetFocusPosition()

◆ GetFontMetrics()

◆ GetForcedTransparency()

◆ GetFPRelativePosition()

◆ GetFriendlyName()

◆ GetItemDescription()

◆ GetLayer()

◆ GetLayerName()

◆ GetLayerSet()

◆ GetMenuImage()

◆ GetMsgPanelInfo()

◆ GetParent()

◆ GetParentAsString()

◆ GetParentFootprint()

◆ GetParentGroup()

◆ GetPosition()

◆ GetSortPosition()

◆ GetStroke()

◆ GetTempFlags()

◆ GetTypeDesc()

◆ GetX()

◆ GetY()

◆ HasDrilledHole()

◆ HasFlag()

◆ HasHole()

◆ HasLineStroke()

◆ HitTest() [1/2]

◆ HitTest() [2/2]

◆ IsBOARD_ITEM()

◆ IsBrightened()

◆ IsConnected()

◆ IsEntered()

◆ IsForceVisible()

◆ IsKnockout()

◆ IsLocked()

◆ IsModified()

◆ IsMoving()

◆ IsNew()