DIALOG_DRILL_CHART_PROPERTIES Class Reference

Chart-specific replacement for the generic table dialog. More...

#include <dialog_drill_chart_properties.h>

Inheritance diagram for DIALOG_DRILL_CHART_PROPERTIES:

Public Types
enum	HOLDER_TYPE { DIALOG , FRAME , PANEL }

Public Member Functions
	DIALOG_DRILL_CHART_PROPERTIES (PCB_BASE_EDIT_FRAME *aFrame, PCB_DRILL_CHART *aChart)
	~DIALOG_DRILL_CHART_PROPERTIES () override
void	SetInitialFocus (wxWindow *aWindow)
	Sets the window (usually a wxTextCtrl) that should be focused when the dialog is shown.
int	ShowModal () override
int	ShowQuasiModal ()
void	EndQuasiModal (int retCode)
bool	IsQuasiModal () const
void	PrepareForModalSubDialog ()
void	CleanupAfterModalSubDialog ()
bool	Show (bool show) override
bool	Enable (bool enable) override
void	OnPaint (wxPaintEvent &event)
void	OnModify ()
void	ClearModify ()
void	SetPosition (const wxPoint &aNewPosition)
	Force the position of the dialog to a new position.
EDA_UNITS	GetUserUnits () const
void	SelectAllInTextCtrls (wxWindowList &children)
void	SetupStandardButtons (std::map< int, wxString > aLabels={})
void	LoadControlState ()
	Load persisted control values from the current project's local settings.
void	SaveControlState ()
	Save control values and geometry to the current project's local settings.
void	OptOut (wxWindow *aWindow)
	Opt out of control state saving.
void	ExcludeFromControlUndoRedo (wxWindow *aWindow)
	Opt a control out of the dialog's generic Ctrl+Z/Ctrl+Y undo/redo.
void	RegisterUnitBinder (UNIT_BINDER *aUnitBinder, wxWindow *aWindow)
	Register a UNIT_BINDER so that it can handle units in control-state save/restore.
void	UnregisterUnitBinder (UNIT_BINDER *aUnitBinder)
	Remove a UNIT_BINDER from the control-state save/restore map.
void	EndDialogShim (int aReturnCode)
	A mode agnostic way to close a dialog.
HOLDER_TYPE	GetType () const
KIWAY &	Kiway () const
	Return a reference to the KIWAY that this object has an opportunity to participate in.
bool	HasKiway () const
	Safety check before asking for the Kiway reference.
PROJECT &	Prj () const
	Return a reference to the PROJECT associated with this KIWAY.
void	SetKiway (wxWindow *aDest, KIWAY *aKiway)
	It is only used for debugging, since "this" is not a wxWindow*.

Static Public Member Functions
static bool	IsCtrl (int aChar, const wxKeyEvent &e)
static bool	IsShiftCtrl (int aChar, const wxKeyEvent &e)

Protected Member Functions
void	finishDialogSettings ()
	In all dialogs, we must call the same functions to fix minimal dlg size, the default position and perhaps some others to fix a few issues depending on Windows Managers this helper function does these calls.
void	clampToWorkArea ()
	Constrain the dialog's minimum size, size and position to the work area of the display it occupies, so a dialog whose content or restored geometry is larger than the monitor still fits, its bottom controls stay reachable, and it never lands off-screen.
void	setSizeInDU (int x, int y)
	Set the dialog to the given dimensions in "dialog units".
int	horizPixelsFromDU (int x) const
	Convert an integer number of dialog units to pixels, horizontally.
int	vertPixelsFromDU (int y) const
	Convert an integer number of dialog units to pixels, vertically.
void	resetSize ()
	Clear the existing dialog size and position.
virtual void	OnCharHook (wxKeyEvent &aEvt)
virtual void	TearDownQuasiModal ()
	Override this method to perform dialog tear down actions not suitable for object dtor.
void	resetUndoRedoForNewContent (wxWindowList &aChildren)
	Reset undo/redo tracking after dynamically replacing child panels.
void	unregisterUnitBinders (wxWindow *aWindow)
	Remove UNIT_BINDER registrations for a window and all its descendants.

Protected Attributes
WX_INFOBAR *	m_infoBar
wxNotebook *	m_notebook
wxPanel *	m_contentsPanel
wxStaticText *	m_layerLabel
PCB_LAYER_BOX_SELECTOR *	m_LayerSelectionCtrl
wxStaticText *	m_unitsLabel
wxChoice *	m_unitsCtrl
wxStaticText *	m_precisionLabel
wxSpinCtrl *	m_precisionCtrl
wxCheckBox *	m_filterPlated
wxCheckBox *	m_filterNonPlated
wxCheckBox *	m_filterVias
wxCheckBox *	m_filterSlots
wxCheckBox *	m_filterBackdrills
wxCheckBox *	m_filterCastellated
wxCheckBox *	m_showTotals
wxCheckBox *	m_cbLocked
wxPanel *	m_columnsPanel
WX_GRID *	m_columnGrid
wxButton *	m_moveUpButton
wxButton *	m_moveDownButton
wxButton *	m_resetColumnsButton
wxButton *	m_importTemplateButton
wxButton *	m_exportTemplateButton
wxPanel *	m_appearancePanel
wxCheckBox *	m_borderCheckbox
wxCheckBox *	m_headerBorder
wxCheckBox *	m_rowSeparators
wxCheckBox *	m_colSeparators
wxStaticText *	m_borderWidthLabel
wxTextCtrl *	m_borderWidthCtrl
wxStaticText *	m_borderWidthUnits
wxStaticText *	m_separatorsWidthLabel
wxTextCtrl *	m_separatorsWidthCtrl
wxStaticText *	m_separatorsWidthUnits
wxStdDialogButtonSizer *	m_sdbSizer
wxButton *	m_sdbSizerOK
wxButton *	m_sdbSizerCancel
EDA_UNITS	m_units
std::string	m_hash_key
bool	m_useCalculatedSize
bool	m_firstPaintEvent
wxWindow *	m_initialFocusTarget
bool	m_isClosing
wxGUIEventLoop *	m_qmodal_loop
bool	m_qmodal_showing
WINDOW_DISABLER *	m_qmodal_parent_disabler
EDA_BASE_FRAME *	m_parentFrame
std::vector< wxWindow * >	m_tabOrder
wxSize	m_initialSize
bool	m_userPositioned
bool	m_userResized
std::map< wxWindow *, wxString >	m_beforeEditValues
std::map< wxWindow *, UNIT_BINDER * >	m_unitBinders
std::vector< UNDO_STEP >	m_undoStack
std::vector< UNDO_STEP >	m_redoStack
std::map< wxWindow *, wxVariant >	m_currentValues
std::set< wxWindow * >	m_controlsWithPendingChanges
std::set< wxWindow * >	m_noControlUndoRedo
bool	m_handlingUndoRedo
bool	m_childReleased

Private Member Functions
bool	TransferDataToWindow () override
bool	TransferDataFromWindow () override
void	onBorderChecked (wxCommandEvent &aEvent) override
void	onMoveUp (wxCommandEvent &aEvent) override
void	onMoveDown (wxCommandEvent &aEvent) override
void	onResetColumns (wxCommandEvent &aEvent) override
void	onImportTemplate (wxCommandEvent &aEvent) override
void	onExportTemplate (wxCommandEvent &aEvent) override
void	applyTemplate (const DRILL_CHART_TEMPLATE &aTemplate)
	Rebuild m_columns/m_shown from a template, keeping unused columns available.
void	fillColumnGrid ()
	Fill the column grid from m_columns, preserving the selected row.
bool	harvestColumnGrid ()
	Read the grid back into m_columns.
void	moveColumn (int aDelta)
void	fitColumnGrid ()
	Share the grid's width out across its columns so none of it goes unused.
void	onColumnGridSize (wxSizeEvent &aEvent)
void	OnCloseWindow (wxCloseEvent &aEvent)
	Properly handle the wxCloseEvent when in the quasimodal mode when not calling EndQuasiModal which is possible with any dialog derived from DIALOG_SHIM.
void	OnActivate (wxActivateEvent &aEvent)
void	forceInitialFocus ()
	Focus the requested initial target if it is visible, otherwise focus the dialog itself so keyboard events (especially ESC) are always delivered.
void	OnSize (wxSizeEvent &aEvent)
void	OnMove (wxMoveEvent &aEvent)
void	OnButton (wxCommandEvent &aEvent)
	Properly handle the default button events when in the quasimodal mode when not calling EndQuasiModal which is possible with any dialog derived from DIALOG_SHIM.
void	onChildSetFocus (wxFocusEvent &aEvent)
void	onInitDialog (wxInitDialogEvent &aEvent)
void	focusParentCanvas (bool aDeferUntilFrameActive=false)
	Set focus back to the parent frame's tool canvas if available, otherwise to the parent window.
std::string	generateKey (const wxWindow *aWin) const
void	registerUndoRedoHandlers (wxWindowList &aChildren)
void	recordControlChange (wxWindow *aCtrl)
	Tell the undo mechanism to snapshot the current value of a control and record it as an undo step when the value changes.
void	flushPendingControlChanges ()
	Apply outstanding control changes to the undo stack, and clear the pending list.
void	onCommandEvent (wxCommandEvent &aEvent)
void	onSpinEvent (wxSpinEvent &aEvent)
void	onSpinDoubleEvent (wxSpinDoubleEvent &aEvent)
void	onStyledTextChanged (wxStyledTextEvent &aEvent)
void	onGridCellChanged (wxGridEvent &aEvent)
void	onPropertyGridChanged (wxPropertyGridEvent &aEvent)
void	onDataViewListChanged (wxDataViewEvent &aEvent)
void	doUndo ()
void	doRedo ()
wxVariant	getControlValue (wxWindow *aCtrl)
void	setControlValue (wxWindow *aCtrl, const wxVariant &aValue)
	DECLARE_EVENT_TABLE ()

Private Attributes
PCB_BASE_EDIT_FRAME *	m_frame
PCB_DRILL_CHART *	m_chart
DRILL_SYMBOL_PROFILE	m_profile
	The board's grouping, edited through the Group By column.
std::vector< DRILL_CHART_COLUMN >	m_columns
	Every known column, checked ones first in chart order.
std::vector< bool >	m_shown
UNIT_BINDER	m_borderWidth
UNIT_BINDER	m_separatorsWidth
KIWAY *	m_kiway
HOLDER_TYPE	m_type

Detailed Description

Chart-specific replacement for the generic table dialog.

The generic one offers copper layers and direct cell editing, both of which a chart has to refuse. Its cells are regenerated from the board, so an edit would be silently discarded, and a fabrication chart on a copper layer would be plotted into the artwork.

Definition at line 43 of file dialog_drill_chart_properties.h.

Member Enumeration Documentation

HOLDER_TYPE

enum KIWAY_HOLDER::HOLDER_TYPE

inherited

Enumerator
DIALOG
FRAME
PANEL

Definition at line 40 of file kiway_holder.h.

Constructor & Destructor Documentation

DIALOG_DRILL_CHART_PROPERTIES()

DIALOG_DRILL_CHART_PROPERTIES::DIALOG_DRILL_CHART_PROPERTIES	(	PCB_BASE_EDIT_FRAME *	aFrame,
		PCB_DRILL_CHART *	aChart )

Definition at line 116 of file dialog_drill_chart_properties.cpp.

References _, COL_NAME, DIALOG_DRILL_CHART_PROPERTIES_BASE::DIALOG_DRILL_CHART_PROPERTIES_BASE(), DrillDocumentationLayers(), DIALOG_SHIM::finishDialogSettings(), m_borderWidth, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_borderWidthCtrl, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_borderWidthLabel, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_borderWidthUnits, m_chart, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_columnGrid, m_frame, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_LayerSelectionCtrl, m_separatorsWidth, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_separatorsWidthCtrl, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_separatorsWidthLabel, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_separatorsWidthUnits, onColumnGridSize(), and DIALOG_SHIM::SetupStandardButtons().

~DIALOG_DRILL_CHART_PROPERTIES()

DIALOG_DRILL_CHART_PROPERTIES::~DIALOG_DRILL_CHART_PROPERTIES ( )

override

Definition at line 147 of file dialog_drill_chart_properties.cpp.

Member Function Documentation

applyTemplate()

void DIALOG_DRILL_CHART_PROPERTIES::applyTemplate ( const DRILL_CHART_TEMPLATE & aTemplate )

private

Rebuild m_columns/m_shown from a template, keeping unused columns available.

Definition at line 496 of file dialog_drill_chart_properties.cpp.

References DRILL_CHART_TEMPLATE::Columns(), fillColumnGrid(), m_columns, DRILL_CHART_COLUMN::m_Heading, DRILL_CHART_COLUMN::m_Id, and m_shown.

Referenced by onImportTemplate(), and onResetColumns().

clampToWorkArea()

void DIALOG_SHIM::clampToWorkArea ( )

protectedinherited

Constrain the dialog's minimum size, size and position to the work area of the display it occupies, so a dialog whose content or restored geometry is larger than the monitor still fits, its bottom controls stay reachable, and it never lands off-screen.

Geometry restored from a different monitor, or inflated by the per-monitor DPI rescale that fires when the dialog moves to the saved monitor, can otherwise leave the dialog off-screen or larger than the display with no way to shrink it. Only shrinks; never grows.

Definition at line 384 of file dialog_shim.cpp.

References ClampRectToDisplay(), and minSize.

Referenced by Show(), EDA_VIEW_SWITCHER::Show(), and HOTKEY_CYCLE_POPUP::Show().

CleanupAfterModalSubDialog()

void DIALOG_SHIM::CleanupAfterModalSubDialog ( )

inherited

Definition at line 1693 of file dialog_shim.cpp.

References m_qmodal_parent_disabler.

ClearModify()

void DIALOG_SHIM::ClearModify ( )

inherited

Definition at line 1599 of file dialog_shim.cpp.

Referenced by DIALOG_FOOTPRINT_FIELDS_TABLE::OnSaveAndContinue(), DIALOG_LIB_FIELDS_TABLE::OnSaveAndContinue(), DIALOG_LIB_FOOTPRINT_FIELDS_TABLE::OnSaveAndContinue(), DIALOG_SYMBOL_FIELDS_TABLE::OnSaveAndContinue(), DIALOG_LIB_FIELDS_TABLE::TransferDataFromWindow(), and DIALOG_LIB_FOOTPRINT_FIELDS_TABLE::TransferDataFromWindow().

DECLARE_EVENT_TABLE()

DIALOG_SHIM::DECLARE_EVENT_TABLE ( )

privateinherited

doRedo()

void DIALOG_SHIM::doRedo ( )

privateinherited

Definition at line 1517 of file dialog_shim.cpp.

References DIALOG_SHIM::UNDO_STEP::after, DIALOG_SHIM::UNDO_STEP::ctrl, flushPendingControlChanges(), m_currentValues, m_handlingUndoRedo, m_redoStack, m_undoStack, and setControlValue().

Referenced by OnCharHook().

doUndo()

void DIALOG_SHIM::doUndo ( )

privateinherited

Definition at line 1500 of file dialog_shim.cpp.

References DIALOG_SHIM::UNDO_STEP::before, DIALOG_SHIM::UNDO_STEP::ctrl, flushPendingControlChanges(), m_currentValues, m_handlingUndoRedo, m_redoStack, m_undoStack, and setControlValue().

Referenced by OnCharHook().

Enable()

bool DIALOG_SHIM::Enable ( bool enable )

overrideinherited

Definition at line 655 of file dialog_shim.cpp.

Referenced by DIALOG_CREATE_ARRAY::UpdatePickedItem(), and DIALOG_CREATE_ARRAY::UpdatePickedPoint().

EndDialogShim()

void DIALOG_SHIM::EndDialogShim ( int aReturnCode )

inherited

A mode agnostic way to close a dialog.

This replaces the protected method wxDialog::EndDialog() which unfortunately was not made virtual and knows nothing of our custom QuasiModal behavior.

Warning

Do not call EndModal or EndQuasimodal directly. This is a bug because it's not known in advance how the dialog was opened and cannot be guaranteed not to change in the future.

Parameters

aReturnCode

is the return code from ending Modal and QuasiModal dialogs.

Definition at line 2052 of file dialog_shim.cpp.

References EndQuasiModal(), and IsQuasiModal().

Referenced by EDA_3D_CONTROLLER::Main(), DIALOG_EXPORT_NETLIST::OnAddGenerator(), DIALOG_EDIT_SYMBOLS_LIBID::onCancel(), DIALOG_LIB_SYMBOL_PROPERTIES::OnCancelButtonClick(), DIALOG_SYMBOL_PROPERTIES::OnCancelButtonClick(), PCB_ONE_LAYER_SELECTOR::onCharHook(), DIALOG_SYMBOL_PROPERTIES::OnClearVariantSymbol(), DIALOG_LIB_EDIT_PIN_TABLE::OnClose(), DIALOG_EXPORT_NETLIST::OnDelGenerator(), DIALOG_SYMBOL_PROPERTIES::OnEditLibrarySymbol(), DIALOG_SYMBOL_PROPERTIES::OnEditSymbol(), DIALOG_SYMBOL_PROPERTIES::OnExchangeSymbol(), PCB_ONE_LAYER_SELECTOR::OnLeftGridCellClick(), PCB_ONE_LAYER_SELECTOR::OnRightGridCellClick(), DIALOG_SYMBOL_PROPERTIES::OnUpdateSymbol(), and DIALOG_PUSH_PAD_PROPERTIES::PadPropertiesAccept().

EndQuasiModal()

void DIALOG_SHIM::EndQuasiModal ( int retCode )

inherited

Definition at line 1700 of file dialog_shim.cpp.

References IsQuasiModal(), m_qmodal_loop, m_qmodal_parent_disabler, Show(), and TearDownQuasiModal().

Referenced by EndDialogShim(), OnButton(), OnCloseWindow(), and ~DIALOG_SHIM().

ExcludeFromControlUndoRedo()

void DIALOG_SHIM::ExcludeFromControlUndoRedo ( wxWindow * aWindow )

inherited

Opt a control out of the dialog's generic Ctrl+Z/Ctrl+Y undo/redo.

The generic handler snapshots a control's value and restores it by position. That is wrong for grids whose rows can be regrouped, sorted, or reordered while the dialog is open (and which manage their own undo), so such controls must opt out.

Definition at line 995 of file dialog_shim.cpp.

References m_noControlUndoRedo.

Referenced by DIALOG_FOOTPRINT_FIELDS_TABLE::DIALOG_FOOTPRINT_FIELDS_TABLE(), DIALOG_LIB_FIELDS_TABLE::DIALOG_LIB_FIELDS_TABLE(), DIALOG_LIB_FOOTPRINT_FIELDS_TABLE::DIALOG_LIB_FOOTPRINT_FIELDS_TABLE(), and DIALOG_SYMBOL_FIELDS_TABLE::DIALOG_SYMBOL_FIELDS_TABLE().

fillColumnGrid()

void DIALOG_DRILL_CHART_PROPERTIES::fillColumnGrid ( )

private

Fill the column grid from m_columns, preserving the selected row.

Definition at line 152 of file dialog_drill_chart_properties.cpp.

References COL_NAME, fitColumnGrid(), DIALOG_DRILL_CHART_PROPERTIES_BASE::m_columnGrid, m_columns, m_profile, and m_shown.

Referenced by applyTemplate(), moveColumn(), and TransferDataToWindow().

finishDialogSettings()

void DIALOG_SHIM::finishDialogSettings ( )

protectedinherited

In all dialogs, we must call the same functions to fix minimal dlg size, the default position and perhaps some others to fix a few issues depending on Windows Managers this helper function does these calls.

finishDialogSettings must be called from derived classes after all widgets have been initialized, and therefore their size fixed. If TransferDataToWindow() is used to initialize widgets, at the end of TransferDataToWindow, or better yet, at end of a wxInitDialogEvent handler.

Definition at line 358 of file dialog_shim.cpp.

Referenced by CONVERT_SETTINGS_DIALOG::CONVERT_SETTINGS_DIALOG(), DIALOG_ANNOTATE::DIALOG_ANNOTATE(), DIALOG_ASSIGN_NETCLASS::DIALOG_ASSIGN_NETCLASS(), DIALOG_BOARD_REANNOTATE::DIALOG_BOARD_REANNOTATE(), DIALOG_BOARD_SETUP::DIALOG_BOARD_SETUP(), DIALOG_BOARD_STACKUP_JOB::DIALOG_BOARD_STACKUP_JOB(), DIALOG_BOARD_STATS_JOB::DIALOG_BOARD_STATS_JOB(), DIALOG_BOM::DIALOG_BOM(), DIALOG_BOOK_REPORTER::DIALOG_BOOK_REPORTER(), DIALOG_CHANGE_SYMBOLS::DIALOG_CHANGE_SYMBOLS(), DIALOG_CLEANUP_TRACKS_AND_VIAS::DIALOG_CLEANUP_TRACKS_AND_VIAS(), DIALOG_CONSTRAINT_LIST::DIALOG_CONSTRAINT_LIST(), DIALOG_CONSTRAINT_VALUE::DIALOG_CONSTRAINT_VALUE(), DIALOG_COPPER_ZONE::DIALOG_COPPER_ZONE(), DIALOG_CREATE_NET_CHAIN::DIALOG_CREATE_NET_CHAIN(), DIALOG_DATABASE_LIB_SETTINGS::DIALOG_DATABASE_LIB_SETTINGS(), DIALOG_DIMENSION_PROPERTIES::DIALOG_DIMENSION_PROPERTIES(), DIALOG_DRAW_LAYERS_SETTINGS::DIALOG_DRAW_LAYERS_SETTINGS(), DIALOG_DRC::DIALOG_DRC(), DIALOG_DRILL_CHART_PROPERTIES::DIALOG_DRILL_CHART_PROPERTIES(), DIALOG_DRILL_GROUPS::DIALOG_DRILL_GROUPS(), DIALOG_EDIT_SYMBOLS_LIBID::DIALOG_EDIT_SYMBOLS_LIBID(), DIALOG_ENUM_PADS::DIALOG_ENUM_PADS(), DIALOG_ERC::DIALOG_ERC(), DIALOG_EXCHANGE_FOOTPRINTS::DIALOG_EXCHANGE_FOOTPRINTS(), DIALOG_EXECUTECOMMAND_JOB_SETTINGS::DIALOG_EXECUTECOMMAND_JOB_SETTINGS(), DIALOG_EXPORT_2581::DIALOG_EXPORT_2581(), DIALOG_EXPORT_2581::DIALOG_EXPORT_2581(), DIALOG_EXPORT_IDF3::DIALOG_EXPORT_IDF3(), DIALOG_EXPORT_NETLIST::DIALOG_EXPORT_NETLIST(), DIALOG_EXPORT_ODBPP::DIALOG_EXPORT_ODBPP(), DIALOG_EXPORT_ODBPP::DIALOG_EXPORT_ODBPP(), DIALOG_EXPORT_STEP::DIALOG_EXPORT_STEP(), DIALOG_EXPORT_VRML::DIALOG_EXPORT_VRML(), DIALOG_FOOTPRINT_CHECKER::DIALOG_FOOTPRINT_CHECKER(), DIALOG_FOOTPRINT_FIELDS_TABLE::DIALOG_FOOTPRINT_FIELDS_TABLE(), DIALOG_FOOTPRINT_PROPERTIES::DIALOG_FOOTPRINT_PROPERTIES(), DIALOG_FOOTPRINT_PROPERTIES_FP_EDITOR::DIALOG_FOOTPRINT_PROPERTIES_FP_EDITOR(), DIALOG_FOOTPRINT_WIZARD_LIST::DIALOG_FOOTPRINT_WIZARD_LIST(), DIALOG_FP_EDIT_PAD_TABLE::DIALOG_FP_EDIT_PAD_TABLE(), DIALOG_GENCAD_EXPORT_OPTIONS::DIALOG_GENCAD_EXPORT_OPTIONS(), DIALOG_GENDRILL::DIALOG_GENDRILL(), DIALOG_GENDRILL::DIALOG_GENDRILL(), DIALOG_GIT_REPOSITORY::DIALOG_GIT_REPOSITORY(), DIALOG_GIT_SWITCH::DIALOG_GIT_SWITCH(), DIALOG_GLOBAL_EDIT_TEARDROPS::DIALOG_GLOBAL_EDIT_TEARDROPS(), DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS::DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS(), DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS::DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS(), DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS::DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS(), DIALOG_GRID_ITEM_PROPERTIES::DIALOG_GRID_ITEM_PROPERTIES(), DIALOG_GRID_SETTINGS::DIALOG_GRID_SETTINGS(), DIALOG_GROUP_PROPERTIES::DIALOG_GROUP_PROPERTIES(), DIALOG_IBIS_PARSER_REPORTER::DIALOG_IBIS_PARSER_REPORTER(), DIALOG_IMAGE_PROPERTIES::DIALOG_IMAGE_PROPERTIES(), DIALOG_IMPORT_CHOOSE_PROJECT::DIALOG_IMPORT_CHOOSE_PROJECT(), DIALOG_IMPORT_NETLIST::DIALOG_IMPORT_NETLIST(), DIALOG_IMPORT_SYMBOL_SELECT::DIALOG_IMPORT_SYMBOL_SELECT(), DIALOG_INSPECTOR::DIALOG_INSPECTOR(), DIALOG_JOBSET_RUN_LOG::DIALOG_JOBSET_RUN_LOG(), DIALOG_JUNCTION_PROPS::DIALOG_JUNCTION_PROPS(), DIALOG_LABEL_PROPERTIES::DIALOG_LABEL_PROPERTIES(), DIALOG_LIB_FIELDS_TABLE::DIALOG_LIB_FIELDS_TABLE(), DIALOG_LIB_FOOTPRINT_FIELDS_TABLE::DIALOG_LIB_FOOTPRINT_FIELDS_TABLE(), DIALOG_LIB_NEW_SYMBOL::DIALOG_LIB_NEW_SYMBOL(), DIALOG_LINE_PROPERTIES::DIALOG_LINE_PROPERTIES(), DIALOG_LIST_HOTKEYS::DIALOG_LIST_HOTKEYS(), DIALOG_MANAGE_REPOSITORIES::DIALOG_MANAGE_REPOSITORIES(), DIALOG_MAP_LAYERS::DIALOG_MAP_LAYERS(), DIALOG_MICROVIA_STACK::DIALOG_MICROVIA_STACK(), DIALOG_MIGRATE_3D_MODELS::DIALOG_MIGRATE_3D_MODELS(), DIALOG_MOVE_EXACT::DIALOG_MOVE_EXACT(), DIALOG_MULTICHANNEL_GENERATE_RULE_AREAS::DIALOG_MULTICHANNEL_GENERATE_RULE_AREAS(), DIALOG_MULTICHANNEL_REPEAT_LAYOUT::DIALOG_MULTICHANNEL_REPEAT_LAYOUT(), DIALOG_NON_COPPER_ZONES_EDITOR::DIALOG_NON_COPPER_ZONES_EDITOR(), DIALOG_OFFSET_ITEM::DIALOG_OFFSET_ITEM(), DIALOG_OUTSET_ITEMS::DIALOG_OUTSET_ITEMS(), DIALOG_PAD_PROPERTIES::DIALOG_PAD_PROPERTIES(), DIALOG_PASTE_SPECIAL::DIALOG_PASTE_SPECIAL(), DIALOG_PCM::DIALOG_PCM(), DIALOG_PLOT_SCHEMATIC::DIALOG_PLOT_SCHEMATIC(), DIALOG_PNS_SETTINGS::DIALOG_PNS_SETTINGS(), DIALOG_POSITION_RELATIVE::DIALOG_POSITION_RELATIVE(), DIALOG_PRINT::DIALOG_PRINT(), DIALOG_PRINT_GENERIC::DIALOG_PRINT_GENERIC(), DIALOG_PRINT_PCBNEW::DIALOG_PRINT_PCBNEW(), DIALOG_PUSH_PAD_PROPERTIES::DIALOG_PUSH_PAD_PROPERTIES(), DIALOG_REFERENCE_IMAGE_PROPERTIES::DIALOG_REFERENCE_IMAGE_PROPERTIES(), DIALOG_REGULATOR_FORM::DIALOG_REGULATOR_FORM(), DIALOG_REMOTE_SYMBOL_CONFIG::DIALOG_REMOTE_SYMBOL_CONFIG(), DIALOG_RESOLVE_FIELD_CASE_CONFLICTS::DIALOG_RESOLVE_FIELD_CASE_CONFLICTS(), DIALOG_RULE_AREA_PROPERTIES::DIALOG_RULE_AREA_PROPERTIES(), DIALOG_SCH_IMPORT_SETTINGS::DIALOG_SCH_IMPORT_SETTINGS(), DIALOG_SCHEMATIC_SETUP::DIALOG_SCHEMATIC_SETUP(), DIALOG_SELECT_3DMODEL::DIALOG_SELECT_3DMODEL(), DIALOG_SHAPE_PROPERTIES::DIALOG_SHAPE_PROPERTIES(), DIALOG_SHAPE_PROPERTIES::DIALOG_SHAPE_PROPERTIES(), DIALOG_SHEET_PIN_PROPERTIES::DIALOG_SHEET_PIN_PROPERTIES(), DIALOG_SHEET_PROPERTIES::DIALOG_SHEET_PROPERTIES(), DIALOG_SWAP_LAYERS::DIALOG_SWAP_LAYERS(), DIALOG_SYMBOL_FIELDS_TABLE::DIALOG_SYMBOL_FIELDS_TABLE(), DIALOG_SYMBOL_PROPERTIES::DIALOG_SYMBOL_PROPERTIES(), DIALOG_SYNC_SHEET_PINS::DIALOG_SYNC_SHEET_PINS(), DIALOG_TABLE_PROPERTIES::DIALOG_TABLE_PROPERTIES(), DIALOG_TABLE_PROPERTIES::DIALOG_TABLE_PROPERTIES(), DIALOG_TABLECELL_PROPERTIES::DIALOG_TABLECELL_PROPERTIES(), DIALOG_TABLECELL_PROPERTIES::DIALOG_TABLECELL_PROPERTIES(), DIALOG_TARGET_PROPERTIES::DIALOG_TARGET_PROPERTIES(), DIALOG_TEMPLATE_SELECTOR::DIALOG_TEMPLATE_SELECTOR(), DIALOG_TEXT_PROPERTIES::DIALOG_TEXT_PROPERTIES(), DIALOG_TEXT_PROPERTIES::DIALOG_TEXT_PROPERTIES(), DIALOG_TEXTBOX_PROPERTIES::DIALOG_TEXTBOX_PROPERTIES(), DIALOG_TRACK_VIA_SIZE::DIALOG_TRACK_VIA_SIZE(), DIALOG_UNUSED_PAD_LAYERS::DIALOG_UNUSED_PAD_LAYERS(), DIALOG_UPDATE_FROM_PCB::DIALOG_UPDATE_FROM_PCB(), DIALOG_UPDATE_PCB::DIALOG_UPDATE_PCB(), DIALOG_UPDATE_SYMBOL_FIELDS::DIALOG_UPDATE_SYMBOL_FIELDS(), DIALOG_USER_DEFINED_SIGNALS::DIALOG_USER_DEFINED_SIGNALS(), DIALOG_WIRE_BUS_PROPERTIES::DIALOG_WIRE_BUS_PROPERTIES(), RULE_EDITOR_DIALOG_BASE::finishInitialization(), DIALOG_PASTE_SPECIAL::HideClearNets(), DIALOG_FIELD_PROPERTIES::init(), DIALOG_EDIT_LIBRARY_TABLES::InstallPanel(), MATCH_PROPERTIES_DIALOG::MATCH_PROPERTIES_DIALOG(), NETLIST_DIALOG_ADD_GENERATOR::NETLIST_DIALOG_ADD_GENERATOR(), NETLIST_VIEW_DIALOG::NETLIST_VIEW_DIALOG(), DIALOG_SIM_COMMAND::onInitDlg(), DIALOG_BARCODE_PROPERTIES::TransferDataToWindow(), DIALOG_BOARD_STATISTICS::TransferDataToWindow(), DIALOG_COLOR_PICKER::TransferDataToWindow(), DIALOG_FOOTPRINT_ASSOCIATIONS::TransferDataToWindow(), DIALOG_PIN_PROPERTIES::TransferDataToWindow(), DIALOG_TRACK_VIA_PROPERTIES::TransferDataToWindow(), WX_MULTI_ENTRY_DIALOG::WX_MULTI_ENTRY_DIALOG(), and WX_PT_ENTRY_DIALOG::WX_PT_ENTRY_DIALOG().

fitColumnGrid()

void DIALOG_DRILL_CHART_PROPERTIES::fitColumnGrid ( )

private

Share the grid's width out across its columns so none of it goes unused.

Definition at line 406 of file dialog_drill_chart_properties.cpp.

References COL_NAME, and DIALOG_DRILL_CHART_PROPERTIES_BASE::m_columnGrid.

Referenced by fillColumnGrid(), and onColumnGridSize().

flushPendingControlChanges()

void DIALOG_SHIM::flushPendingControlChanges ( )

privateinherited

Apply outstanding control changes to the undo stack, and clear the pending list.

Runs at the end of the current event handler.

Definition at line 1202 of file dialog_shim.cpp.

References getControlValue(), m_controlsWithPendingChanges, m_currentValues, m_redoStack, and m_undoStack.

Referenced by doRedo(), doUndo(), and recordControlChange().

focusParentCanvas()

void DIALOG_SHIM::focusParentCanvas ( bool aDeferUntilFrameActive = false )

privateinherited

Set focus back to the parent frame's tool canvas if available, otherwise to the parent window.

Prevents focus from landing on auxiliary panels like the properties panel when the mouse happens to hover over them at dialog close time.

Parameters

aDeferUntilFrameActive

also re-asserts the focus from an idle callback, needed only for the GTK quasi-modal teardown race where the dialog is still the active top-level window when this is called.

Definition at line 453 of file dialog_shim.cpp.

References TOOLS_HOLDER::GetToolCanvas(), KIPLATFORM::UI::IsWindowActive(), and m_parentFrame.

Referenced by Show(), and ShowQuasiModal().

forceInitialFocus()

void DIALOG_SHIM::forceInitialFocus ( )

privateinherited

Focus the requested initial target if it is visible, otherwise focus the dialog itself so keyboard events (especially ESC) are always delivered.

Definition at line 1552 of file dialog_shim.cpp.

References KIPLATFORM::UI::ForceFocus(), and m_initialFocusTarget.

Referenced by OnActivate(), and OnPaint().

generateKey()

std::string DIALOG_SHIM::generateKey ( const wxWindow * aWin ) const

privateinherited

Definition at line 662 of file dialog_shim.cpp.

References index, and makeKey().

Referenced by LoadControlState(), and SaveControlState().

getControlValue()

wxVariant DIALOG_SHIM::getControlValue ( wxWindow * aCtrl )

privateinherited

Definition at line 1286 of file dialog_shim.cpp.

References grid, and table.

Referenced by flushPendingControlChanges(), and registerUndoRedoHandlers().

GetType()

HOLDER_TYPE KIWAY_HOLDER::GetType ( ) const

inlineinherited

Definition at line 47 of file kiway_holder.h.

References m_type.

Referenced by DIALOG_SHIM::DIALOG_SHIM(), EDA_3D_CONTROLLER::Main(), and PANEL_PREVIEW_3D_MODEL::onModify().

GetUserUnits()

EDA_UNITS DIALOG_SHIM::GetUserUnits ( ) const

inlineinherited

Definition at line 130 of file dialog_shim.h.

References m_units.

Referenced by DIALOG_FP_EDIT_PAD_TABLE::DIALOG_FP_EDIT_PAD_TABLE(), DIALOG_PIN_PROPERTIES::DIALOG_PIN_PROPERTIES(), DIALOG_DRC::OnSaveReport(), DIALOG_MICROVIA_STACK::TransferDataFromWindow(), DIALOG_POSITION_RELATIVE::updateAnchorInfo(), DIALOG_MOVE_EXACT::updateDialogControls(), DIALOG_OFFSET_ITEM::updateDialogControls(), and DIALOG_POSITION_RELATIVE::updateDialogControls().

harvestColumnGrid()

bool DIALOG_DRILL_CHART_PROPERTIES::harvestColumnGrid ( )

private

Read the grid back into m_columns.

Definition at line 200 of file dialog_drill_chart_properties.cpp.

References DIALOG_DRILL_CHART_PROPERTIES_BASE::m_columnGrid, m_columns, m_profile, and m_shown.

Referenced by moveColumn(), onExportTemplate(), and TransferDataFromWindow().

HasKiway()

bool KIWAY_HOLDER::HasKiway ( ) const

inlineinherited

Safety check before asking for the Kiway reference.

Returns

true if kiway is non-null

Definition at line 64 of file kiway_holder.h.

References m_kiway.

Referenced by DIALOG_SHIM::DIALOG_SHIM(), and DIALOG_SHIM::~DIALOG_SHIM().

horizPixelsFromDU()

int DIALOG_SHIM::horizPixelsFromDU ( int x ) const

protectedinherited

Convert an integer number of dialog units to pixels, horizontally.

See SetSizeInDU or wxDialog documentation for more information.

Definition at line 427 of file dialog_shim.cpp.

IsCtrl()

static bool DIALOG_SHIM::IsCtrl ( int aChar, const wxKeyEvent & e )

inlinestaticinherited

Definition at line 139 of file dialog_shim.h.

IsQuasiModal()

bool DIALOG_SHIM::IsQuasiModal ( ) const

inlineinherited

Definition at line 105 of file dialog_shim.h.

References m_qmodal_showing.

Referenced by EndDialogShim(), EndQuasiModal(), OnButton(), DIALOG_EDIT_SYMBOLS_LIBID::onCancel(), DIALOG_BOOK_REPORTER::OnClose(), DIALOG_ERC::OnCloseErcDialog(), OnCloseWindow(), and ~DIALOG_SHIM().

IsShiftCtrl()

static bool DIALOG_SHIM::IsShiftCtrl ( int aChar, const wxKeyEvent & e )

inlinestaticinherited

Definition at line 145 of file dialog_shim.h.

Kiway()

KIWAY & KIWAY_HOLDER::Kiway ( ) const

inlineinherited

Return a reference to the KIWAY that this object has an opportunity to participate in.

A KIWAY_HOLDER is not necessarily a KIWAY_PLAYER.

Definition at line 54 of file kiway_holder.h.

References m_kiway.

Referenced by PROJECT_TREE_ITEM::Activate(), FOOTPRINT_VIEWER_FRAME::AddFootprintToPCB(), IMPORT_PROJ_HELPER::addLocalLibraries(), SYMBOL_EDITOR_CONTROL::AddSymbolToSchematic(), CVPCB_MAINFRAME::BuildLibrariesList(), EDA_BASE_FRAME::CheckForAutosaveFiles(), KICAD_MANAGER_FRAME::CloseProject(), EDA_BASE_FRAME::CommonSettingsChanged(), SCH_INSPECTION_TOOL::CompareSchematicWithHistory(), KIWAY_PLAYER::Destroy(), DIALOG_IMPORT_SYMBOL_SELECT::DIALOG_IMPORT_SYMBOL_SELECT(), DIALOG_LIST_HOTKEYS::DIALOG_LIST_HOTKEYS(), DIALOG_RESCUE_EACH::DIALOG_RESCUE_EACH(), DIALOG_SHIM::DIALOG_SHIM(), EDA_BASE_FRAME::doAutoSave(), KICAD_MANAGER_FRAME::doReCreateMenuBar(), BOARD_EDITOR_CONTROL::EditFpInFpEditor(), SCH_EDITOR_CONTROL::EditWithSymbolEditor(), DIALOG_CHANGE_SYMBOLS::launchMatchIdSymbolBrowser(), DIALOG_CHANGE_SYMBOLS::launchNewIdSymbolBrowser(), KICAD_MANAGER_FRAME::LoadProject(), PGM_SINGLE_TOP::MacOpenFile(), SIMULATOR_FRAME::onExit(), KICAD_MANAGER_FRAME::OnIdle(), EDA_BASE_FRAME::OnLanguageSelectionEvent(), KIGFX::WX_VIEW_CONTROLS::onMotion(), DIALOG_SYMBOL_REMAP::OnRemapSymbols(), DIALOG_FIELD_PROPERTIES::OnTextValueSelectButtonClick(), DIALOG_GIT_MR_REVIEW::openFileDiff(), PCB_DESIGN_BLOCK_PREVIEW_WIDGET::PCB_DESIGN_BLOCK_PREVIEW_WIDGET(), KICAD_MANAGER_FRAME::PreloadAllLibraries(), Prj(), KICAD_MANAGER_FRAME::ProjectChanged(), KICAD_MANAGER_FRAME::RestoreCommitFromHistory(), KICAD_MANAGER_FRAME::RestoreLocalHistory(), MERGETOOL_FRAME::RunMerge(), SCH_INSPECTION_TOOL::RunSimulation(), CVPCB_MAINFRAME::SaveFootprintAssociation(), SelectFootprintFromChooser(), CVPCB_MAINFRAME::SendComponentSelectionToSch(), sendHighlightNets(), showCalculatorPage(), BOARD_EDITOR_CONTROL::ShowEeschema(), CVPCB_CONTROL::ShowFootprintViewer(), showFrame(), EDA_BASE_FRAME::ShowPreferences(), SCH_EDITOR_CONTROL::SimProbe(), SCH_EDITOR_CONTROL::SimTune(), KICAD_MANAGER_FRAME::UnarchiveFiles(), DIALOG_EXCHANGE_FOOTPRINTS::ViewAndSelectFootprint(), and DIALOG_SHIM::~DIALOG_SHIM().

LoadControlState()

void DIALOG_SHIM::LoadControlState ( )

inherited

Load persisted control values from the current project's local settings.

Controls may opt out by setting the boolean window property "persist" to false. Dialog geometry is stored under the special key "__geometry".

Definition at line 818 of file dialog_shim.cpp.

References COMMON_SETTINGS::CsInternals(), generateKey(), PGM_BASE::GetCommonSettings(), getDialogKeyFromTitle(), grid, index, isCompoundDateTimePicker(), COMMON_SETTINGS_INTERNALS::m_dialogControlValues, m_hash_key, m_unitBinders, Pgm(), and PROPERTY_HOLDER::SafeCast().

Referenced by onInitDialog().

moveColumn()

void DIALOG_DRILL_CHART_PROPERTIES::moveColumn ( int aDelta )

private

Definition at line 460 of file dialog_drill_chart_properties.cpp.

References fillColumnGrid(), harvestColumnGrid(), DIALOG_DRILL_CHART_PROPERTIES_BASE::m_columnGrid, m_columns, and m_shown.

Referenced by onMoveDown(), and onMoveUp().

OnActivate()

void DIALOG_SHIM::OnActivate ( wxActivateEvent & aEvent )

privateinherited

Definition at line 1567 of file dialog_shim.cpp.

References DIALOG_SHIM(), forceInitialFocus(), KIPLATFORM::UI::IsWindowActive(), and m_firstPaintEvent.

onBorderChecked()

void DIALOG_DRILL_CHART_PROPERTIES::onBorderChecked ( wxCommandEvent & aEvent )

overrideprivatevirtual

Reimplemented from DIALOG_DRILL_CHART_PROPERTIES_BASE.

Definition at line 441 of file dialog_drill_chart_properties.cpp.

References DIALOG_DRILL_CHART_PROPERTIES_BASE::m_borderCheckbox, m_borderWidth, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_colSeparators, m_frame, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_headerBorder, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_LayerSelectionCtrl, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_rowSeparators, m_separatorsWidth, and ToLAYER_ID().

OnButton()

void DIALOG_SHIM::OnButton ( wxCommandEvent & aEvent )

privateinherited

Properly handle the default button events when in the quasimodal mode when not calling EndQuasiModal which is possible with any dialog derived from DIALOG_SHIM.

Definition at line 1769 of file dialog_shim.cpp.

References EndQuasiModal(), ignore_unused(), and IsQuasiModal().

Referenced by DIALOG_SHIM(), and ~DIALOG_SHIM().

OnCharHook()

void DIALOG_SHIM::OnCharHook ( wxKeyEvent & aEvt )

protectedvirtualinherited

Reimplemented in DIALOG_DRC, DIALOG_ERC, DIALOG_FIND, DIALOG_FP_EDIT_PAD_TABLE, DIALOG_SCH_FIND, HK_PROMPT_DIALOG, HTML_MESSAGE_BOX, and RULE_EDITOR_DIALOG_BASE.

Definition at line 1821 of file dialog_shim.cpp.

References delta, doRedo(), doUndo(), m_beforeEditValues, m_parentFrame, m_tabOrder, MD_ALT, MD_CTRL, and MD_SHIFT.

Referenced by DIALOG_TABLECELL_PROPERTIES::DIALOG_TABLECELL_PROPERTIES(), DIALOG_TEXT_PROPERTIES::DIALOG_TEXT_PROPERTIES(), DIALOG_TEXTBOX_PROPERTIES::DIALOG_TEXTBOX_PROPERTIES(), DIALOG_DRC::OnCharHook(), DIALOG_ERC::OnCharHook(), DIALOG_FIND::OnCharHook(), DIALOG_FP_EDIT_PAD_TABLE::OnCharHook(), DIALOG_SCH_FIND::OnCharHook(), RULE_EDITOR_DIALOG_BASE::OnCharHook(), and DIALOG_TEXTBOX_PROPERTIES::~DIALOG_TEXTBOX_PROPERTIES().

onChildSetFocus()

void DIALOG_SHIM::onChildSetFocus ( wxFocusEvent & aEvent )

privateinherited

Definition at line 1805 of file dialog_shim.cpp.

References m_beforeEditValues, and m_isClosing.

Referenced by SelectAllInTextCtrls(), and ~DIALOG_SHIM().

OnCloseWindow()

void DIALOG_SHIM::OnCloseWindow ( wxCloseEvent & aEvent )

privateinherited

Properly handle the wxCloseEvent when in the quasimodal mode when not calling EndQuasiModal which is possible with any dialog derived from DIALOG_SHIM.

Definition at line 1751 of file dialog_shim.cpp.

References APP_MONITOR::AddNavigationBreadcrumb(), EndQuasiModal(), IsQuasiModal(), and SaveControlState().

Referenced by DIALOG_SHIM(), and ~DIALOG_SHIM().

onColumnGridSize()

void DIALOG_DRILL_CHART_PROPERTIES::onColumnGridSize ( wxSizeEvent & aEvent )

private

Definition at line 434 of file dialog_drill_chart_properties.cpp.

References fitColumnGrid().

Referenced by DIALOG_DRILL_CHART_PROPERTIES().

onCommandEvent()

void DIALOG_SHIM::onCommandEvent ( wxCommandEvent & aEvent )

privateinherited

Definition at line 1226 of file dialog_shim.cpp.

References m_handlingUndoRedo, and recordControlChange().

Referenced by registerUndoRedoHandlers(), and ~DIALOG_SHIM().

onDataViewListChanged()

void DIALOG_SHIM::onDataViewListChanged ( wxDataViewEvent & aEvent )

privateinherited

Definition at line 1278 of file dialog_shim.cpp.

References m_handlingUndoRedo, and recordControlChange().

Referenced by registerUndoRedoHandlers(), and ~DIALOG_SHIM().

onExportTemplate()

void DIALOG_DRILL_CHART_PROPERTIES::onExportTemplate ( wxCommandEvent & aEvent )

overrideprivatevirtual

Reimplemented from DIALOG_DRILL_CHART_PROPERTIES_BASE.

Definition at line 557 of file dialog_drill_chart_properties.cpp.

References _, DRILL_CHART_TEMPLATE::Columns(), DisplayError(), harvestColumnGrid(), m_columns, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_precisionCtrl, m_shown, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_showTotals, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_unitsCtrl, DRILL_CHART_TEMPLATE::SaveToFile(), DRILL_CHART_TEMPLATE::SetName(), DRILL_CHART_TEMPLATE::SetPrecision(), DRILL_CHART_TEMPLATE::SetShowTotals(), and DRILL_CHART_TEMPLATE::SetUnits().

onGridCellChanged()

void DIALOG_SHIM::onGridCellChanged ( wxGridEvent & aEvent )

privateinherited

Definition at line 1262 of file dialog_shim.cpp.

References m_handlingUndoRedo, and recordControlChange().

Referenced by registerUndoRedoHandlers(), and ~DIALOG_SHIM().

onImportTemplate()

void DIALOG_DRILL_CHART_PROPERTIES::onImportTemplate ( wxCommandEvent & aEvent )

overrideprivatevirtual

Reimplemented from DIALOG_DRILL_CHART_PROPERTIES_BASE.

Definition at line 531 of file dialog_drill_chart_properties.cpp.

References _, applyTemplate(), DisplayError(), DRILL_CHART_TEMPLATE::GetPrecision(), DRILL_CHART_TEMPLATE::GetShowTotals(), DRILL_CHART_TEMPLATE::GetUnits(), DRILL_CHART_TEMPLATE::LoadFromFile(), DIALOG_DRILL_CHART_PROPERTIES_BASE::m_precisionCtrl, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_showTotals, and DIALOG_DRILL_CHART_PROPERTIES_BASE::m_unitsCtrl.

onInitDialog()

void DIALOG_SHIM::onInitDialog ( wxInitDialogEvent & aEvent )

privateinherited

Definition at line 342 of file dialog_shim.cpp.

References LoadControlState().

Referenced by DIALOG_SHIM(), and ~DIALOG_SHIM().

OnModify()

void DIALOG_SHIM::OnModify ( )

inherited

Definition at line 1592 of file dialog_shim.cpp.

Referenced by DIALOG_LIB_SYMBOL_PROPERTIES::OnAddBodyStyle(), DIALOG_FIELDS_TABLE::OnAddField(), DIALOG_FOOTPRINT_PROPERTIES::OnAddField(), DIALOG_FOOTPRINT_PROPERTIES_FP_EDITOR::OnAddField(), DIALOG_LIB_SYMBOL_PROPERTIES::OnAddField(), DIALOG_SYMBOL_PROPERTIES::OnAddField(), DIALOG_LIB_SYMBOL_PROPERTIES::OnAddFootprintFilter(), DIALOG_FOOTPRINT_PROPERTIES_FP_EDITOR::onAddGroup(), DIALOG_LIB_SYMBOL_PROPERTIES::OnAddJumperGroup(), DIALOG_LIB_SYMBOL_PROPERTIES::OnBodyStyleMoveDown(), DIALOG_LIB_SYMBOL_PROPERTIES::OnBodyStyleMoveUp(), DIALOG_FOOTPRINT_PROPERTIES::OnCheckBox(), DIALOG_FOOTPRINT_PROPERTIES_FP_EDITOR::OnCheckBox(), DIALOG_LIB_SYMBOL_PROPERTIES::OnCheckBox(), DIALOG_SYMBOL_PROPERTIES::OnCheckBox(), DIALOG_FOOTPRINT_PROPERTIES::OnChoice(), DIALOG_FOOTPRINT_PROPERTIES_FP_EDITOR::OnChoice(), DIALOG_FOOTPRINT_PROPERTIES::OnCombobox(), DIALOG_LIB_SYMBOL_PROPERTIES::OnCombobox(), DIALOG_PAD_PROPERTIES::onCornerRadiusChange(), DIALOG_PAD_PROPERTIES::onCornerSizePercentChange(), DIALOG_LIB_SYMBOL_PROPERTIES::OnDeleteBodyStyle(), DIALOG_FOOTPRINT_PROPERTIES::OnDeleteField(), DIALOG_FOOTPRINT_PROPERTIES_FP_EDITOR::OnDeleteField(), DIALOG_LIB_SYMBOL_PROPERTIES::OnDeleteField(), DIALOG_SYMBOL_PROPERTIES::OnDeleteField(), DIALOG_PAD_PROPERTIES::OnDrillShapeSelected(), DIALOG_LIB_SYMBOL_PROPERTIES::OnEditFootprintFilter(), DIALOG_LIB_SYMBOL_PROPERTIES::OnEditSpiceModel(), DIALOG_SYMBOL_PROPERTIES::OnEditSpiceModel(), DIALOG_LIB_SYMBOL_PROPERTIES::OnGridCellChanged(), DIALOG_FOOTPRINT_PROPERTIES_FP_EDITOR::onLayerGridRowAddUserLayer(), DIALOG_FOOTPRINT_PROPERTIES_FP_EDITOR::onLayerGridRowDelete(), DIALOG_PAD_PROPERTIES::onModify(), DIALOG_PAD_PROPERTIES::onModify(), DIALOG_LIB_SYMBOL_PROPERTIES::OnMoveDown(), DIALOG_SYMBOL_PROPERTIES::OnMoveDown(), DIALOG_LIB_SYMBOL_PROPERTIES::OnMoveUp(), DIALOG_SYMBOL_PROPERTIES::OnMoveUp(), DIALOG_PAD_PROPERTIES::onPadShapeSelection(), DIALOG_SYMBOL_PROPERTIES::OnPinTableCellEdited(), DIALOG_LIB_SYMBOL_PROPERTIES::onPowerCheckBox(), DIALOG_FIELDS_TABLE::OnRemoveField(), DIALOG_FOOTPRINT_PROPERTIES_FP_EDITOR::onRemoveGroup(), DIALOG_LIB_SYMBOL_PROPERTIES::OnRemoveJumperGroup(), DIALOG_FIELDS_TABLE::OnRenameField(), DIALOG_PAD_PROPERTIES::OnSetCopperLayers(), DIALOG_PAD_PROPERTIES::OnSetLayers(), DIALOG_LIB_SYMBOL_PROPERTIES::OnSymbolNameText(), DIALOG_FOOTPRINT_PROPERTIES::OnText(), DIALOG_FOOTPRINT_PROPERTIES_FP_EDITOR::OnText(), DIALOG_LIB_SYMBOL_PROPERTIES::OnText(), DIALOG_BARCODE_PROPERTIES::OnTextValueChanged(), DIALOG_SYMBOL_PROPERTIES::OnUnitChoice(), DIALOG_LIB_SYMBOL_PROPERTIES::OnUnitSpinCtrl(), DIALOG_LIB_SYMBOL_PROPERTIES::OnUnitSpinCtrlEnter(), DIALOG_LIB_SYMBOL_PROPERTIES::OnUnitSpinCtrlKillFocus(), DIALOG_BARCODE_PROPERTIES::OnValuesChanged(), DIALOG_PAD_PROPERTIES::OnValuesChanged(), DIALOG_FIELDS_TABLE::OnViewControlsCellChanged(), DIALOG_PAD_PROPERTIES::PadOrientEvent(), DIALOG_PAD_PROPERTIES::PadTypeSelected(), and DIALOG_FIELDS_TABLE::ShowHideColumn().

OnMove()

void DIALOG_SHIM::OnMove ( wxMoveEvent & aEvent )

privateinherited

Definition at line 623 of file dialog_shim.cpp.

References m_childReleased, m_userPositioned, KIPLATFORM::UI::ReleaseChildWindow(), and KIPLATFORM::UI::ReparentModal().

Referenced by DIALOG_SHIM(), and ~DIALOG_SHIM().

onMoveDown()

void DIALOG_DRILL_CHART_PROPERTIES::onMoveDown ( wxCommandEvent & aEvent )

overrideprivatevirtual

Reimplemented from DIALOG_DRILL_CHART_PROPERTIES_BASE.

Definition at line 490 of file dialog_drill_chart_properties.cpp.

References moveColumn().

onMoveUp()

void DIALOG_DRILL_CHART_PROPERTIES::onMoveUp ( wxCommandEvent & aEvent )

overrideprivatevirtual

Reimplemented from DIALOG_DRILL_CHART_PROPERTIES_BASE.

Definition at line 484 of file dialog_drill_chart_properties.cpp.

References moveColumn().

OnPaint()

void DIALOG_SHIM::OnPaint ( wxPaintEvent & event )

inherited

Definition at line 1534 of file dialog_shim.cpp.

References KIPLATFORM::UI::FixupCancelButtonCmdKeyCollision(), forceInitialFocus(), m_firstPaintEvent, registerUndoRedoHandlers(), and SelectAllInTextCtrls().

Referenced by DIALOG_SHIM(), and ~DIALOG_SHIM().

onPropertyGridChanged()

void DIALOG_SHIM::onPropertyGridChanged ( wxPropertyGridEvent & aEvent )

privateinherited

Definition at line 1270 of file dialog_shim.cpp.

References m_handlingUndoRedo, and recordControlChange().

Referenced by registerUndoRedoHandlers(), and ~DIALOG_SHIM().

onResetColumns()

void DIALOG_DRILL_CHART_PROPERTIES::onResetColumns ( wxCommandEvent & aEvent )

overrideprivatevirtual

Reimplemented from DIALOG_DRILL_CHART_PROPERTIES_BASE.

Definition at line 525 of file dialog_drill_chart_properties.cpp.

References applyTemplate(), and DRILL_CHART_TEMPLATE::MakeDefault().

OnSize()

void DIALOG_SHIM::OnSize ( wxSizeEvent & aEvent )

privateinherited

Definition at line 616 of file dialog_shim.cpp.

References m_userResized.

Referenced by DIALOG_SHIM(), and ~DIALOG_SHIM().

onSpinDoubleEvent()

void DIALOG_SHIM::onSpinDoubleEvent ( wxSpinDoubleEvent & aEvent )

privateinherited

Definition at line 1244 of file dialog_shim.cpp.

References m_handlingUndoRedo, and recordControlChange().

Referenced by registerUndoRedoHandlers(), and ~DIALOG_SHIM().

onSpinEvent()

void DIALOG_SHIM::onSpinEvent ( wxSpinEvent & aEvent )

privateinherited

Definition at line 1235 of file dialog_shim.cpp.

References m_handlingUndoRedo, and recordControlChange().

Referenced by registerUndoRedoHandlers(), and ~DIALOG_SHIM().

onStyledTextChanged()

void DIALOG_SHIM::onStyledTextChanged ( wxStyledTextEvent & aEvent )

privateinherited

Definition at line 1253 of file dialog_shim.cpp.

References m_handlingUndoRedo, and recordControlChange().

Referenced by registerUndoRedoHandlers(), and ~DIALOG_SHIM().

OptOut()

void DIALOG_SHIM::OptOut ( wxWindow * aWindow )

inherited

Opt out of control state saving.

Parameters

aWindow

can be either a specific control, or the whole dialog

Definition at line 987 of file dialog_shim.cpp.

References PROPERTY_HOLDER::SetProperty().

Referenced by DIALOG_EXPORT_3D_IMAGE::DIALOG_EXPORT_3D_IMAGE(), DIALOG_EXPORT_STEP::DIALOG_EXPORT_STEP(), DIALOG_FIELDS_TABLE::DIALOG_FIELDS_TABLE(), DIALOG_FIND::DIALOG_FIND(), DIALOG_FOOTPRINT_FIELDS_TABLE::DIALOG_FOOTPRINT_FIELDS_TABLE(), DIALOG_FOOTPRINT_WIZARD_LIST::DIALOG_FOOTPRINT_WIZARD_LIST(), DIALOG_GIT_COMMIT::DIALOG_GIT_COMMIT(), DIALOG_GLOBAL_DELETION::DIALOG_GLOBAL_DELETION(), DIALOG_GRID_SETTINGS::DIALOG_GRID_SETTINGS(), DIALOG_GROUP_PROPERTIES::DIALOG_GROUP_PROPERTIES(), DIALOG_JOBSET_RUN_LOG::DIALOG_JOBSET_RUN_LOG(), DIALOG_LIB_EDIT_PIN_TABLE::DIALOG_LIB_EDIT_PIN_TABLE(), DIALOG_LIB_FIELDS_TABLE::DIALOG_LIB_FIELDS_TABLE(), DIALOG_LIB_FOOTPRINT_FIELDS_TABLE::DIALOG_LIB_FOOTPRINT_FIELDS_TABLE(), DIALOG_MIGRATE_BUSES::DIALOG_MIGRATE_BUSES(), DIALOG_SCH_FIND::DIALOG_SCH_FIND(), DIALOG_SIM_FORMAT_VALUE::DIALOG_SIM_FORMAT_VALUE(), DIALOG_SYMBOL_FIELDS_TABLE::DIALOG_SYMBOL_FIELDS_TABLE(), EDA_LIST_DIALOG::EDA_LIST_DIALOG(), EDA_LIST_DIALOG::EDA_LIST_DIALOG(), EDA_LIST_DIALOG::initDialog(), SAVE_AS_DIALOG::SAVE_AS_DIALOG(), WX_PT_ENTRY_DIALOG::WX_PT_ENTRY_DIALOG(), and WX_TEXT_ENTRY_DIALOG::WX_TEXT_ENTRY_DIALOG().

PrepareForModalSubDialog()

void DIALOG_SHIM::PrepareForModalSubDialog ( )

inherited

Definition at line 1686 of file dialog_shim.cpp.

References m_qmodal_parent_disabler.

Prj()

PROJECT & KIWAY_HOLDER::Prj ( ) const

inherited

Return a reference to the PROJECT associated with this KIWAY.

Definition at line 32 of file kiway_holder.cpp.

References Kiway(), and KIWAY::Prj().

Referenced by DESIGN_BLOCK_TREE_MODEL_ADAPTER::AddLibraries(), FP_TREE_MODEL_ADAPTER::AddLibraries(), SYMBOL_TREE_MODEL_ADAPTER::AddLibraries(), AskSaveBoardFileName(), DIALOG_MIGRATE_3D_MODELS::AutoMigrateByFilename(), DIALOG_SYMBOL_REMAP::backupProject(), DIALOG_MIGRATE_3D_MODELS::BoardHasUnresolvedWrlReferences(), CVPCB_MAINFRAME::buildEquivalenceList(), CVPCB_MAINFRAME::BuildLibrariesList(), PCB_BASE_FRAME::canCloseWindow(), SIMULATOR_FRAME::canCloseWindow(), KICAD_MANAGER_FRAME::CloseProject(), EDA_BASE_FRAME::CommonSettingsChanged(), SCH_INSPECTION_TOOL::CompareSchematicWithFile(), SCH_INSPECTION_TOOL::CompareSchematicWithHistory(), DIALOG_MIGRATE_3D_MODELS::CountUnresolvedWrlReferences(), DIALOG_GEN_FOOTPRINT_POSITION::CreateAsciiFiles(), DIALOG_LIB_FIELDS_TABLE::createDatasheetEditor(), DIALOG_SYMBOL_FIELDS_TABLE::createDatasheetEditor(), DIALOG_GEN_FOOTPRINT_POSITION::CreateGerberFiles(), PCB_BASE_FRAME::CreateNewFootprint(), DIALOG_SYMBOL_REMAP::createProjectSymbolLibTable(), DIALOG_ANNOTATE::DIALOG_ANNOTATE(), DIALOG_BOARD_REANNOTATE::DIALOG_BOARD_REANNOTATE(), DIALOG_BOARD_SETUP::DIALOG_BOARD_SETUP(), DIALOG_BOARD_STATISTICS::DIALOG_BOARD_STATISTICS(), DIALOG_CHANGE_SYMBOLS::DIALOG_CHANGE_SYMBOLS(), DIALOG_CONFIG_EQUFILES::DIALOG_CONFIG_EQUFILES(), DIALOG_DRC_RULE_EDITOR::DIALOG_DRC_RULE_EDITOR(), DIALOG_EXCHANGE_FOOTPRINTS::DIALOG_EXCHANGE_FOOTPRINTS(), DIALOG_FOOTPRINT_FIELDS_TABLE::DIALOG_FOOTPRINT_FIELDS_TABLE(), DIALOG_GEN_FOOTPRINT_POSITION::DIALOG_GEN_FOOTPRINT_POSITION(), DIALOG_IBIS_PARSER_REPORTER::DIALOG_IBIS_PARSER_REPORTER(), DIALOG_IMPORT_NETLIST::DIALOG_IMPORT_NETLIST(), DIALOG_LIB_FOOTPRINT_FIELDS_TABLE::DIALOG_LIB_FOOTPRINT_FIELDS_TABLE(), DIALOG_PAGES_SETTINGS::DIALOG_PAGES_SETTINGS(), DIALOG_PLOT::DIALOG_PLOT(), DIALOG_PLOT_SCHEMATIC::DIALOG_PLOT_SCHEMATIC(), DIALOG_SCHEMATIC_SETUP::DIALOG_SCHEMATIC_SETUP(), DIALOG_SIM_MODEL< T >::DIALOG_SIM_MODEL(), DIALOG_SYMBOL_FIELDS_TABLE::DIALOG_SYMBOL_FIELDS_TABLE(), DIALOG_SYMBOL_REMAP::DIALOG_SYMBOL_REMAP(), DIALOG_UPDATE_FROM_PCB::DIALOG_UPDATE_FROM_PCB(), DIALOG_UPDATE_PCB::DIALOG_UPDATE_PCB(), FOOTPRINT_PREVIEW_PANEL::DisplayFootprint(), CVPCB_MAINFRAME::DisplayStatus(), EDA_BASE_FRAME::doAutoSave(), KICAD_MANAGER_FRAME::doReCreateMenuBar(), DIALOG_GENDRILL::genDrillAndMapFiles(), DIALOG_TABLE_PROPERTIES::getContextualTextVars(), DIALOG_TABLECELL_PROPERTIES::getContextualTextVars(), DIALOG_TEXT_PROPERTIES::getContextualTextVars(), EDA_3D_VIEWER_FRAME::getExportFileName(), PCB_BASE_FRAME::GetLibraryItemsForListDialog(), SCH_BASE_FRAME::GetLibraryItemsForListDialog(), DIALOG_SYMBOL_REMAP::getLibsNotInGlobalSymbolLibTable(), SCH_BASE_FRAME::GetLibSymbol(), DIALOG_PLOT_SCHEMATIC::getOutputPath(), KICAD_MANAGER_FRAME::GetProjectFileName(), FIELDS_GRID_TABLE::initGrid(), CVPCB_MAINFRAME::LoadFootprintFiles(), DIALOG_LIB_FOOTPRINT_FIELDS_TABLE::loadFootprints(), KICAD_MANAGER_FRAME::LoadProject(), SIMULATOR_FRAME::LoadSettings(), SIMULATOR_FRAME::LoadSimulator(), EDA_BASE_FRAME::LoadWindowState(), EDA_3D_VIEWER_FRAME::NewDisplay(), DIALOG_SIM_MODEL< T >::onBrowseButtonClick(), DIALOG_EXPORT_2581::onBrowseClicked(), DIALOG_EXPORT_ODBPP::onBrowseClicked(), DIALOG_EXPORT_STEP::onBrowseClicked(), DIALOG_GENCAD_EXPORT_OPTIONS::onBrowseClicked(), DIALOG_REMOTE_SYMBOL_CONFIG::onBrowseDestination(), DIALOG_IMPORT_NETLIST::onBrowseNetlistFiles(), DIALOG_EDIT_SYMBOLS_LIBID::onClickOrphansButton(), DIALOG_FIELDS_TABLE::OnExport(), DIALOG_EXPORT_STEP::onExportButton(), PCB_BASE_FRAME::OnFpChangeDebounceTimer(), DIALOG_GENDRILL::onGenReportFile(), KICAD_MANAGER_FRAME::OnIdle(), DIALOG_CONFIG_EQUFILES::OnOkClick(), KICAD_MANAGER_FRAME::OnOpenFileInTextEditor(), DIALOG_PLOT::onOpenOutputDirectory(), DIALOG_GEN_FOOTPRINT_POSITION::onOutputDirectoryBrowseClicked(), DIALOG_GENDRILL::onOutputDirectoryBrowseClicked(), DIALOG_PLOT::onOutputDirectoryBrowseClicked(), DIALOG_PLOT_SCHEMATIC::onOutputDirectoryBrowseClicked(), DIALOG_FIELDS_TABLE::OnOutputFileBrowseClicked(), DIALOG_BOARD_SETUP::onPageChanged(), DIALOG_SCHEMATIC_SETUP::onPageChanged(), DIALOG_SYMBOL_REMAP::OnRemapSymbols(), DIALOG_DRC::OnSaveReport(), DIALOG_ERC::OnSaveReport(), PANEL_FOOTPRINT_CHOOSER::PANEL_FOOTPRINT_CHOOSER(), PANEL_PREVIEW_3D_MODEL::PANEL_PREVIEW_3D_MODEL(), EDA_DRAW_FRAME::PrintDrawingSheet(), KICAD_MANAGER_FRAME::PrintPrjInfo(), KICAD_MANAGER_FRAME::ProjectChanged(), CVPCB_MAINFRAME::readNetListAndFpFiles(), EDA_3D_VIEWER_FRAME::ReloadRequest(), SIMULATOR_FRAME::ReloadSimulator(), DIALOG_SYMBOL_REMAP::remapSymbolToLibTable(), DIALOG_LIB_FIELDS_TABLE::resolveTextVar(), DIALOG_LIB_FOOTPRINT_FIELDS_TABLE::resolveTextVar(), KICAD_MANAGER_FRAME::RestoreCommitFromHistory(), KICAD_MANAGER_FRAME::RestoreLocalHistory(), SAVE_AS_DIALOG::SAVE_AS_DIALOG(), KICAD_MANAGER_FRAME::SaveOpenJobSetsToLocalSettings(), DIALOG_BOARD_STATISTICS::saveReportClicked(), EDA_BASE_FRAME::SaveSettings(), SIMULATOR_FRAME::SaveSettings(), DIALOG_EXPORT_2581::saveToProject(), SCH_BASE_FRAME::SelectLibrary(), PCB_BASE_FRAME::setFPWatcher(), GERBVIEW_FRAME::SetPageSettings(), SCH_BASE_FRAME::setSymWatcher(), BOARD_EDITOR_CONTROL::ShowEeschema(), PL_EDITOR_FRAME::SyncDataItem(), KICAD_MANAGER_FRAME::ToggleLocalHistory(), DIALOG_EDIT_SYMBOLS_LIBID::TransferDataFromWindow(), DIALOG_EXPORT_NETLIST::TransferDataFromWindow(), DIALOG_SIM_MODEL< T >::TransferDataFromWindow(), DIALOG_EXPORT_2581::TransferDataToWindow(), KICAD_MANAGER_FRAME::UnarchiveFiles(), DIALOG_PAGES_SETTINGS::UpdateDrawingSheetExample(), DIALOG_FIELD_PROPERTIES::UpdateField(), SIMULATOR_FRAME::UpdateTitle(), DIALOG_FOOTPRINT_PROPERTIES::~DIALOG_FOOTPRINT_PROPERTIES(), and EDA_3D_VIEWER_FRAME::~EDA_3D_VIEWER_FRAME().

recordControlChange()

void DIALOG_SHIM::recordControlChange ( wxWindow * aCtrl )

privateinherited

Tell the undo mechanism to snapshot the current value of a control and record it as an undo step when the value changes.

If you call this from an event handler that generates multiple change events, they will be coalesced into a single undo step.

Definition at line 1182 of file dialog_shim.cpp.

References flushPendingControlChanges(), and m_controlsWithPendingChanges.

Referenced by onCommandEvent(), onDataViewListChanged(), onGridCellChanged(), onPropertyGridChanged(), onSpinDoubleEvent(), onSpinEvent(), and onStyledTextChanged().

registerUndoRedoHandlers()

void DIALOG_SHIM::registerUndoRedoHandlers ( wxWindowList & aChildren )

privateinherited

Definition at line 1096 of file dialog_shim.cpp.

References getControlValue(), grid, isCompoundDateTimePicker(), m_currentValues, m_noControlUndoRedo, onCommandEvent(), onDataViewListChanged(), onGridCellChanged(), onPropertyGridChanged(), onSpinDoubleEvent(), onSpinEvent(), onStyledTextChanged(), and registerUndoRedoHandlers().

Referenced by OnPaint(), registerUndoRedoHandlers(), and resetUndoRedoForNewContent().

RegisterUnitBinder()

void DIALOG_SHIM::RegisterUnitBinder ( UNIT_BINDER * aUnitBinder, wxWindow * aWindow )

inherited

Register a UNIT_BINDER so that it can handle units in control-state save/restore.

Parameters

aUnitBinder
aWindow	the control window

Definition at line 1001 of file dialog_shim.cpp.

References m_unitBinders.

resetSize()

void DIALOG_SHIM::resetSize ( )

protectedinherited

Clear the existing dialog size and position.

This will cause the dialog size to be clear so the next time the dialog is shown the sizers will layout the dialog accordingly. This useful when there are dialog windows that size changes due to layout dependency hidden controls.

Definition at line 600 of file dialog_shim.cpp.

References getDialogKeyFromTitle(), m_hash_key, and Pgm().

Referenced by DIALOG_PAD_PROPERTIES::updatePadSizeControls().

resetUndoRedoForNewContent()

void DIALOG_SHIM::resetUndoRedoForNewContent ( wxWindowList & aChildren )

protectedinherited

Reset undo/redo tracking after dynamically replacing child panels.

Clears the undo/redo stacks and current value baselines, then registers undo/redo event handlers on the new children.

Parameters

aChildren

The child window list of the newly created panel.

Definition at line 1732 of file dialog_shim.cpp.

References m_controlsWithPendingChanges, m_currentValues, m_redoStack, m_undoStack, and registerUndoRedoHandlers().

Referenced by RULE_EDITOR_DIALOG_BASE::SetContentPanel().

SaveControlState()

void DIALOG_SHIM::SaveControlState ( )

inherited

Save control values and geometry to the current project's local settings.

Definition at line 704 of file dialog_shim.cpp.

References COMMON_SETTINGS::CsInternals(), generateKey(), PGM_BASE::GetCommonSettings(), getDialogKeyFromTitle(), grid, index, isCompoundDateTimePicker(), COMMON_SETTINGS_INTERNALS::m_dialogControlValues, m_hash_key, m_unitBinders, Pgm(), and PROPERTY_HOLDER::SafeCast().

Referenced by OnCloseWindow(), and Show().

SelectAllInTextCtrls()

void DIALOG_SHIM::SelectAllInTextCtrls ( wxWindowList & children )

inherited

Definition at line 1022 of file dialog_shim.cpp.

References ignore_unused(), isCompoundDateTimePicker(), m_beforeEditValues, minSize, onChildSetFocus(), and SelectAllInTextCtrls().

Referenced by OnPaint(), and SelectAllInTextCtrls().

setControlValue()

void DIALOG_SHIM::setControlValue ( wxWindow * aCtrl, const wxVariant & aValue )

privateinherited

Definition at line 1383 of file dialog_shim.cpp.

References grid, and table.

Referenced by doRedo(), and doUndo().

SetInitialFocus()

void DIALOG_SHIM::SetInitialFocus ( wxWindow * aWindow )

inlineinherited

Sets the window (usually a wxTextCtrl) that should be focused when the dialog is shown.

Definition at line 94 of file dialog_shim.h.

References m_initialFocusTarget.

Referenced by DIALOG_BOM::DIALOG_BOM(), DIALOG_CONFIGURE_PATHS::DIALOG_CONFIGURE_PATHS(), DIALOG_ENUM_PADS::DIALOG_ENUM_PADS(), DIALOG_FIND::DIALOG_FIND(), DIALOG_FOOTPRINT_FIELDS_TABLE::DIALOG_FOOTPRINT_FIELDS_TABLE(), DIALOG_FOOTPRINT_PROPERTIES::DIALOG_FOOTPRINT_PROPERTIES(), DIALOG_FOOTPRINT_PROPERTIES_FP_EDITOR::DIALOG_FOOTPRINT_PROPERTIES_FP_EDITOR(), DIALOG_GET_FOOTPRINT_BY_NAME::DIALOG_GET_FOOTPRINT_BY_NAME(), DIALOG_GRID_SETTINGS::DIALOG_GRID_SETTINGS(), DIALOG_GROUP_PROPERTIES::DIALOG_GROUP_PROPERTIES(), DIALOG_IMPORT_GFX_SCH::DIALOG_IMPORT_GFX_SCH(), DIALOG_IMPORT_GRAPHICS::DIALOG_IMPORT_GRAPHICS(), DIALOG_IMPORT_SYMBOL_SELECT::DIALOG_IMPORT_SYMBOL_SELECT(), DIALOG_JUNCTION_PROPS::DIALOG_JUNCTION_PROPS(), DIALOG_LABEL_PROPERTIES::DIALOG_LABEL_PROPERTIES(), DIALOG_LIB_FIELDS_TABLE::DIALOG_LIB_FIELDS_TABLE(), DIALOG_LIB_FOOTPRINT_FIELDS_TABLE::DIALOG_LIB_FOOTPRINT_FIELDS_TABLE(), DIALOG_LINE_PROPERTIES::DIALOG_LINE_PROPERTIES(), DIALOG_OFFSET_ITEM::DIALOG_OFFSET_ITEM(), DIALOG_PAD_PROPERTIES::DIALOG_PAD_PROPERTIES(), DIALOG_PIN_PROPERTIES::DIALOG_PIN_PROPERTIES(), DIALOG_PLUGIN_OPTIONS::DIALOG_PLUGIN_OPTIONS(), DIALOG_POSITION_RELATIVE::DIALOG_POSITION_RELATIVE(), DIALOG_REMOTE_SYMBOL_CONFIG::DIALOG_REMOTE_SYMBOL_CONFIG(), DIALOG_SCH_FIND::DIALOG_SCH_FIND(), DIALOG_SHAPE_PROPERTIES::DIALOG_SHAPE_PROPERTIES(), DIALOG_SHEET_PIN_PROPERTIES::DIALOG_SHEET_PIN_PROPERTIES(), DIALOG_SYMBOL_CHOOSER::DIALOG_SYMBOL_CHOOSER(), DIALOG_SYMBOL_FIELDS_TABLE::DIALOG_SYMBOL_FIELDS_TABLE(), DIALOG_TABLECELL_PROPERTIES::DIALOG_TABLECELL_PROPERTIES(), DIALOG_TABLECELL_PROPERTIES::DIALOG_TABLECELL_PROPERTIES(), DIALOG_TARGET_PROPERTIES::DIALOG_TARGET_PROPERTIES(), DIALOG_TEXT_PROPERTIES::DIALOG_TEXT_PROPERTIES(), DIALOG_TEXT_PROPERTIES::DIALOG_TEXT_PROPERTIES(), DIALOG_TEXTBOX_PROPERTIES::DIALOG_TEXTBOX_PROPERTIES(), DIALOG_TUNING_PATTERN_PROPERTIES::DIALOG_TUNING_PATTERN_PROPERTIES(), DIALOG_WIRE_BUS_PROPERTIES::DIALOG_WIRE_BUS_PROPERTIES(), EDA_VIEW_SWITCHER::EDA_VIEW_SWITCHER(), HK_PROMPT_DIALOG::HK_PROMPT_DIALOG(), SCH_EDITOR_CONTROL::IncrementAnnotations(), DIALOG_FIELD_PROPERTIES::init(), DIALOG_EXCHANGE_FOOTPRINTS::OnMatchAllClicked(), DIALOG_EXCHANGE_FOOTPRINTS::OnMatchIDClicked(), DIALOG_EXCHANGE_FOOTPRINTS::OnMatchRefClicked(), DIALOG_EXCHANGE_FOOTPRINTS::OnMatchSelectedClicked(), DIALOG_EXCHANGE_FOOTPRINTS::OnMatchValueClicked(), DIALOG_LABEL_PROPERTIES::onMultiLabelCheck(), SAVE_AS_DIALOG::SAVE_AS_DIALOG(), SAVE_SYMBOL_AS_DIALOG::SAVE_SYMBOL_AS_DIALOG(), DIALOG_NON_COPPER_ZONES_EDITOR::TransferDataToWindow(), DIALOG_RULE_AREA_PROPERTIES::TransferDataToWindow(), DIALOG_TRACK_VIA_PROPERTIES::TransferDataToWindow(), WX_PT_ENTRY_DIALOG::WX_PT_ENTRY_DIALOG(), WX_TEXT_ENTRY_DIALOG::WX_TEXT_ENTRY_DIALOG(), and WX_UNIT_ENTRY_DIALOG::WX_UNIT_ENTRY_DIALOG().

SetKiway()

void KIWAY_HOLDER::SetKiway ( wxWindow * aDest, KIWAY * aKiway )

inherited

It is only used for debugging, since "this" is not a wxWindow*.

"this" is a KIWAY_HOLDER mix-in.

Parameters

aDest	is the recipient of aKiway pointer.
aKiway	is often from a parent window or from KIFACE::CreateKiWindow().

Definition at line 39 of file kiway_holder.cpp.

References ignore_unused(), m_kiway, and name.

Referenced by DIALOG_SHIM::DIALOG_SHIM(), InvokePcbLibTableEditor(), and InvokeSchEditSymbolLibTable().

SetPosition()

void DIALOG_SHIM::SetPosition ( const wxPoint & aNewPosition )

inherited

Force the position of the dialog to a new position.

Parameters

aNewPosition

is the new forced position

Definition at line 447 of file dialog_shim.cpp.

Referenced by PCB_BASE_FRAME::SelectOneLayer().

setSizeInDU()

void DIALOG_SHIM::setSizeInDU ( int x, int y )

protectedinherited

Set the dialog to the given dimensions in "dialog units".

These are units equivalent to 4* the average character width and 8* the average character height, allowing a dialog to be sized in a way that scales it with the system font.

Definition at line 420 of file dialog_shim.cpp.

Referenced by HTML_MESSAGE_BOX::HTML_MESSAGE_BOX(), and HTML_MESSAGE_BOX::SetDialogSizeInDU().

SetupStandardButtons()

void DIALOG_SHIM::SetupStandardButtons ( std::map< int, wxString > aLabels = {} )

inherited

Definition at line 2046 of file dialog_shim.cpp.

References recursiveDescent().

Referenced by DIALOG_TRACK_VIA_PROPERTIES::commonInit(), CONVERT_SETTINGS_DIALOG::CONVERT_SETTINGS_DIALOG(), DIALOG_ANNOTATE::DIALOG_ANNOTATE(), DIALOG_ARCHIVE_JOB_SETTINGS::DIALOG_ARCHIVE_JOB_SETTINGS(), DIALOG_ASSIGN_NETCLASS::DIALOG_ASSIGN_NETCLASS(), DIALOG_BOARD_REANNOTATE::DIALOG_BOARD_REANNOTATE(), DIALOG_BOARD_STACKUP_JOB::DIALOG_BOARD_STACKUP_JOB(), DIALOG_BOARD_STATS_JOB::DIALOG_BOARD_STATS_JOB(), DIALOG_BOM::DIALOG_BOM(), DIALOG_BOOK_REPORTER::DIALOG_BOOK_REPORTER(), DIALOG_CHANGE_SYMBOLS::DIALOG_CHANGE_SYMBOLS(), DIALOG_CLEANUP_GRAPHICS::DIALOG_CLEANUP_GRAPHICS(), DIALOG_COLOR_PICKER::DIALOG_COLOR_PICKER(), DIALOG_CONFIG_EQUFILES::DIALOG_CONFIG_EQUFILES(), DIALOG_CONFIGURE_PATHS::DIALOG_CONFIGURE_PATHS(), DIALOG_COPPER_ZONE::DIALOG_COPPER_ZONE(), DIALOG_COPYFILES_JOB_SETTINGS::DIALOG_COPYFILES_JOB_SETTINGS(), DIALOG_CREATE_ARRAY::DIALOG_CREATE_ARRAY(), DIALOG_CREATE_NET_CHAIN::DIALOG_CREATE_NET_CHAIN(), DIALOG_DATABASE_LIB_SETTINGS::DIALOG_DATABASE_LIB_SETTINGS(), DIALOG_DESIGN_BLOCK_PROPERTIES::DIALOG_DESIGN_BLOCK_PROPERTIES(), DIALOG_DESTINATION::DIALOG_DESTINATION(), DIALOG_DIELECTRIC_MATERIAL::DIALOG_DIELECTRIC_MATERIAL(), DIALOG_DIFF_PHASE_SKEW_PROPERTIES::DIALOG_DIFF_PHASE_SKEW_PROPERTIES(), DIALOG_DIMENSION_PROPERTIES::DIALOG_DIMENSION_PROPERTIES(), DIALOG_DRAW_LAYERS_SETTINGS::DIALOG_DRAW_LAYERS_SETTINGS(), DIALOG_DRC::DIALOG_DRC(), DIALOG_DRILL_CHART_PROPERTIES::DIALOG_DRILL_CHART_PROPERTIES(), DIALOG_ERC::DIALOG_ERC(), DIALOG_EXCHANGE_FOOTPRINTS::DIALOG_EXCHANGE_FOOTPRINTS(), DIALOG_EXECUTECOMMAND_JOB_SETTINGS::DIALOG_EXECUTECOMMAND_JOB_SETTINGS(), DIALOG_EXPORT_2581::DIALOG_EXPORT_2581(), DIALOG_EXPORT_2581::DIALOG_EXPORT_2581(), DIALOG_EXPORT_IDF3::DIALOG_EXPORT_IDF3(), DIALOG_EXPORT_NETLIST::DIALOG_EXPORT_NETLIST(), DIALOG_EXPORT_ODBPP::DIALOG_EXPORT_ODBPP(), DIALOG_EXPORT_ODBPP::DIALOG_EXPORT_ODBPP(), DIALOG_EXPORT_STEP::DIALOG_EXPORT_STEP(), DIALOG_EXPORT_VRML::DIALOG_EXPORT_VRML(), DIALOG_FILTER_SELECTION::DIALOG_FILTER_SELECTION(), DIALOG_FOOTPRINT_CHECKER::DIALOG_FOOTPRINT_CHECKER(), DIALOG_FOOTPRINT_FIELDS_TABLE::DIALOG_FOOTPRINT_FIELDS_TABLE(), DIALOG_FOOTPRINT_PROPERTIES::DIALOG_FOOTPRINT_PROPERTIES(), DIALOG_FOOTPRINT_PROPERTIES_FP_EDITOR::DIALOG_FOOTPRINT_PROPERTIES_FP_EDITOR(), DIALOG_FOOTPRINT_WIZARD_LIST::DIALOG_FOOTPRINT_WIZARD_LIST(), DIALOG_FP_EDIT_PAD_TABLE::DIALOG_FP_EDIT_PAD_TABLE(), DIALOG_GEN_FOOTPRINT_POSITION::DIALOG_GEN_FOOTPRINT_POSITION(), DIALOG_GEN_FOOTPRINT_POSITION::DIALOG_GEN_FOOTPRINT_POSITION(), DIALOG_GENDRILL::DIALOG_GENDRILL(), DIALOG_GENDRILL::DIALOG_GENDRILL(), DIALOG_GENERATE_DATABASE_CONNECTION::DIALOG_GENERATE_DATABASE_CONNECTION(), DIALOG_GET_FOOTPRINT_BY_NAME::DIALOG_GET_FOOTPRINT_BY_NAME(), DIALOG_GIT_COMMIT::DIALOG_GIT_COMMIT(), DIALOG_GIT_CREDENTIALS::DIALOG_GIT_CREDENTIALS(), DIALOG_GIT_REPOSITORY::DIALOG_GIT_REPOSITORY(), DIALOG_GLOBAL_DELETION::DIALOG_GLOBAL_DELETION(), DIALOG_GLOBAL_EDIT_TEARDROPS::DIALOG_GLOBAL_EDIT_TEARDROPS(), DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS::DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS(), DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS::DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS(), DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS::DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS(), DIALOG_GRID_ITEM_PROPERTIES::DIALOG_GRID_ITEM_PROPERTIES(), DIALOG_GRID_SETTINGS::DIALOG_GRID_SETTINGS(), DIALOG_GROUP_PROPERTIES::DIALOG_GROUP_PROPERTIES(), DIALOG_IBIS_PARSER_REPORTER::DIALOG_IBIS_PARSER_REPORTER(), DIALOG_IMAGE_PROPERTIES::DIALOG_IMAGE_PROPERTIES(), DIALOG_IMPORT_CHOOSE_PROJECT::DIALOG_IMPORT_CHOOSE_PROJECT(), DIALOG_IMPORT_GFX_SCH::DIALOG_IMPORT_GFX_SCH(), DIALOG_IMPORT_GRAPHICS::DIALOG_IMPORT_GRAPHICS(), DIALOG_IMPORT_NETLIST::DIALOG_IMPORT_NETLIST(), DIALOG_IMPORT_SETTINGS::DIALOG_IMPORT_SETTINGS(), DIALOG_IMPORT_SYMBOL_SELECT::DIALOG_IMPORT_SYMBOL_SELECT(), DIALOG_JOBSET_RUN_LOG::DIALOG_JOBSET_RUN_LOG(), DIALOG_JUNCTION_PROPS::DIALOG_JUNCTION_PROPS(), DIALOG_LABEL_PROPERTIES::DIALOG_LABEL_PROPERTIES(), DIALOG_LIB_EDIT_PIN_TABLE::DIALOG_LIB_EDIT_PIN_TABLE(), DIALOG_LIB_FIELDS_TABLE::DIALOG_LIB_FIELDS_TABLE(), DIALOG_LIB_FOOTPRINT_FIELDS_TABLE::DIALOG_LIB_FOOTPRINT_FIELDS_TABLE(), DIALOG_LIB_NEW_SYMBOL::DIALOG_LIB_NEW_SYMBOL(), DIALOG_LINE_PROPERTIES::DIALOG_LINE_PROPERTIES(), DIALOG_MAP_LAYERS::DIALOG_MAP_LAYERS(), DIALOG_MICROVIA_STACK::DIALOG_MICROVIA_STACK(), DIALOG_MOVE_EXACT::DIALOG_MOVE_EXACT(), DIALOG_MULTICHANNEL_GENERATE_RULE_AREAS::DIALOG_MULTICHANNEL_GENERATE_RULE_AREAS(), DIALOG_MULTICHANNEL_REPEAT_LAYOUT::DIALOG_MULTICHANNEL_REPEAT_LAYOUT(), DIALOG_NON_COPPER_ZONES_EDITOR::DIALOG_NON_COPPER_ZONES_EDITOR(), DIALOG_OFFSET_ITEM::DIALOG_OFFSET_ITEM(), DIALOG_OUTSET_ITEMS::DIALOG_OUTSET_ITEMS(), DIALOG_PAD_PROPERTIES::DIALOG_PAD_PROPERTIES(), DIALOG_PAGES_SETTINGS::DIALOG_PAGES_SETTINGS(), DIALOG_PCM::DIALOG_PCM(), DIALOG_PIN_PROPERTIES::DIALOG_PIN_PROPERTIES(), DIALOG_PLOT::DIALOG_PLOT(), DIALOG_PLOT_SCHEMATIC::DIALOG_PLOT_SCHEMATIC(), DIALOG_PLUGIN_OPTIONS::DIALOG_PLUGIN_OPTIONS(), DIALOG_PNS_DIFF_PAIR_DIMENSIONS::DIALOG_PNS_DIFF_PAIR_DIMENSIONS(), DIALOG_PNS_SETTINGS::DIALOG_PNS_SETTINGS(), DIALOG_POSITION_RELATIVE::DIALOG_POSITION_RELATIVE(), DIALOG_PRINT::DIALOG_PRINT(), DIALOG_PRINT_GENERIC::DIALOG_PRINT_GENERIC(), DIALOG_PUSH_PAD_PROPERTIES::DIALOG_PUSH_PAD_PROPERTIES(), DIALOG_RC_JOB::DIALOG_RC_JOB(), DIALOG_REFERENCE_IMAGE_PROPERTIES::DIALOG_REFERENCE_IMAGE_PROPERTIES(), DIALOG_REGULATOR_FORM::DIALOG_REGULATOR_FORM(), DIALOG_REMOTE_SYMBOL_CONFIG::DIALOG_REMOTE_SYMBOL_CONFIG(), DIALOG_RENDER_JOB::DIALOG_RENDER_JOB(), DIALOG_RESCUE_EACH::DIALOG_RESCUE_EACH(), DIALOG_RESOLVE_FIELD_CASE_CONFLICTS::DIALOG_RESOLVE_FIELD_CASE_CONFLICTS(), DIALOG_RULE_AREA_PROPERTIES::DIALOG_RULE_AREA_PROPERTIES(), DIALOG_SCH_IMPORT_SETTINGS::DIALOG_SCH_IMPORT_SETTINGS(), DIALOG_SHAPE_PROPERTIES::DIALOG_SHAPE_PROPERTIES(), DIALOG_SHAPE_PROPERTIES::DIALOG_SHAPE_PROPERTIES(), DIALOG_SHEET_PIN_PROPERTIES::DIALOG_SHEET_PIN_PROPERTIES(), DIALOG_SHEET_PROPERTIES::DIALOG_SHEET_PROPERTIES(), DIALOG_SIM_COMMAND::DIALOG_SIM_COMMAND(), DIALOG_SWAP_LAYERS::DIALOG_SWAP_LAYERS(), DIALOG_SYMBOL_CHOOSER::DIALOG_SYMBOL_CHOOSER(), DIALOG_SYMBOL_FIELDS_TABLE::DIALOG_SYMBOL_FIELDS_TABLE(), DIALOG_SYMBOL_PROPERTIES::DIALOG_SYMBOL_PROPERTIES(), DIALOG_TABLE_PROPERTIES::DIALOG_TABLE_PROPERTIES(), DIALOG_TABLE_PROPERTIES::DIALOG_TABLE_PROPERTIES(), DIALOG_TABLECELL_PROPERTIES::DIALOG_TABLECELL_PROPERTIES(), DIALOG_TABLECELL_PROPERTIES::DIALOG_TABLECELL_PROPERTIES(), DIALOG_TARGET_PROPERTIES::DIALOG_TARGET_PROPERTIES(), DIALOG_TEXT_PROPERTIES::DIALOG_TEXT_PROPERTIES(), DIALOG_TEXT_PROPERTIES::DIALOG_TEXT_PROPERTIES(), DIALOG_TEXTBOX_PROPERTIES::DIALOG_TEXTBOX_PROPERTIES(), DIALOG_TRACK_VIA_SIZE::DIALOG_TRACK_VIA_SIZE(), DIALOG_TUNING_PATTERN_PROPERTIES::DIALOG_TUNING_PATTERN_PROPERTIES(), DIALOG_UNUSED_PAD_LAYERS::DIALOG_UNUSED_PAD_LAYERS(), DIALOG_UPDATE_FROM_PCB::DIALOG_UPDATE_FROM_PCB(), DIALOG_UPDATE_PCB::DIALOG_UPDATE_PCB(), DIALOG_UPDATE_SYMBOL_FIELDS::DIALOG_UPDATE_SYMBOL_FIELDS(), DIALOG_USER_DEFINED_SIGNALS::DIALOG_USER_DEFINED_SIGNALS(), DIALOG_VIA_STITCH_PROPERTIES::DIALOG_VIA_STITCH_PROPERTIES(), DIALOG_WIRE_BUS_PROPERTIES::DIALOG_WIRE_BUS_PROPERTIES(), EDA_LIST_DIALOG::EDA_LIST_DIALOG(), EDA_REORDERABLE_LIST_DIALOG::EDA_REORDERABLE_LIST_DIALOG(), HTML_MESSAGE_BOX::HTML_MESSAGE_BOX(), DIALOG_FIELD_PROPERTIES::init(), DIALOG_EDIT_LIBRARY_TABLES::InstallPanel(), MATCH_PROPERTIES_DIALOG::MATCH_PROPERTIES_DIALOG(), NETLIST_DIALOG_ADD_GENERATOR::NETLIST_DIALOG_ADD_GENERATOR(), PAGED_DIALOG::PAGED_DIALOG(), SAVE_AS_DIALOG::SAVE_AS_DIALOG(), SAVE_SYMBOL_AS_DIALOG::SAVE_SYMBOL_AS_DIALOG(), DIALOG_CLEANUP_TRACKS_AND_VIAS::setupOKButtonLabel(), WX_MULTI_ENTRY_DIALOG::WX_MULTI_ENTRY_DIALOG(), WX_PT_ENTRY_DIALOG::WX_PT_ENTRY_DIALOG(), WX_TEXT_ENTRY_DIALOG::WX_TEXT_ENTRY_DIALOG(), and WX_UNIT_ENTRY_DIALOG::WX_UNIT_ENTRY_DIALOG().

Show()

bool DIALOG_SHIM::Show ( bool show )

overrideinherited

Definition at line 488 of file dialog_shim.cpp.

References clampToWorkArea(), KIPLATFORM::UI::EnsureVisible(), focusParentCanvas(), getDialogKeyFromTitle(), m_hash_key, m_initialSize, m_useCalculatedSize, m_userPositioned, m_userResized, Pgm(), SaveControlState(), and KIPLATFORM::UI::StabilizeWindowPosition().

Referenced by SCH_INSPECTION_TOOL::CrossProbe(), BOARD_INSPECTION_TOOL::DiffFootprint(), SCH_INSPECTION_TOOL::DiffSymbol(), BOARD_EDITOR_CONTROL::EditFootprintFields(), SCH_EDITOR_CONTROL::EditSymbolFields(), EndQuasiModal(), BOARD_EDITOR_CONTROL::GenerateBOM(), SCH_EDITOR_CONTROL::GenerateBOM(), BOARD_INSPECTION_TOOL::InspectConstraints(), BOARD_INSPECTION_TOOL::InspectDRCError(), SCH_INSPECTION_TOOL::NextMarker(), SCH_EDIT_FRAME::OnAnnotate(), DIALOG_DRC::OnDRCItemDClick(), DIALOG_ERC::OnERCItemDClick(), DIALOG_CLEANUP_GRAPHICS::OnLeftDClickItem(), DIALOG_CLEANUP_TRACKS_AND_VIAS::OnLeftDClickItem(), DIALOG_FOOTPRINT_CHECKER::OnLeftDClickItem(), DIALOG_SCH_FIND::onShowSearchPanel(), SCH_INSPECTION_TOOL::PrevMarker(), CVPCB_MAINFRAME::readNetListAndFpFiles(), BOARD_INSPECTION_TOOL::reportClearance(), DIALOG_FIND::Show(), DIALOG_FIND_BY_PROPERTIES::Show(), DIALOG_PAD_PROPERTIES::Show(), EDA_LIST_DIALOG::Show(), EDA_VIEW_SWITCHER::Show(), HOTKEY_CYCLE_POPUP::Show(), RULE_EDITOR_DIALOG_BASE::Show(), PCB_CONTROL::ShowDrillGroups(), SCH_INSPECTION_TOOL::ShowERCDialog(), HTML_MESSAGE_BOX::ShowModeless(), ShowQuasiModal(), DIALOG_POSITION_RELATIVE::UpdatePickedItem(), and DIALOG_POSITION_RELATIVE::UpdatePickedPoint().

ShowModal()

int DIALOG_SHIM::ShowModal ( )

overrideinherited

Definition at line 1605 of file dialog_shim.cpp.

References KIPLATFORM::UI::ReparentModal(), and KIPLATFORM::UI::StabilizeWindowPosition().

Referenced by PANEL_SETUP_LAYERS::addUserDefinedLayer(), PCB_CONTROL::ApplyDesignBlockLayout(), MULTICHANNEL_TOOL::AutogenerateRuleAreas(), GRID_CELL_COLOR_SELECTOR::BeginEdit(), SCH_INSPECTION_TOOL::CheckSymbol(), FOOTPRINT_EDITOR_CONTROL::CleanupGraphics(), GLOBAL_EDIT_TOOL::CleanupGraphics(), GLOBAL_EDIT_TOOL::CleanupTracksAndVias(), CONSTRAINT_EDIT_TOOL::commitConstraint(), ZONE_CREATE_HELPER::commitZone(), FOOTPRINT_EDITOR_CONTROL::CompareLibraryWithFile(), COMMON_CONTROL::ConfigurePaths(), DIALOG_PLOT::CreateDrillFile(), CONVERT_TOOL::CreateLines(), SYMBOL_EDIT_FRAME::CreateNewSymbol(), MICROWAVE_TOOL::createPolygonShape(), CONVERT_TOOL::CreatePolys(), ROUTER_TOOL::CustomTrackWidthDialog(), PANEL_DESIGN_BLOCK_CHOOSER::displayErrors(), DisplayHotkeyList(), LIB_FIELDS_EDITOR_GRID_TRICKS::doFieldsTablePopupSelection(), CURSORS_GRID_TRICKS::doPopupSelection(), MEASUREMENTS_GRID_TRICKS::doPopupSelection(), SIGNALS_GRID_TRICKS::doPopupSelection(), ROUTER_TOOL::DpDimensionsDialog(), DRAWING_TOOL::DrawBarcode(), SIMULATOR_FRAME::EditAnalysis(), EditConstraintValue(), DESIGN_BLOCK_PANE::EditDesignBlockProperties(), SYMBOL_EDITOR_PIN_TOOL::EditPinProperties(), PANEL_SETUP_VIA_STACKS::editPreset(), SCH_EDIT_TOOL::EditProperties(), SYMBOL_EDITOR_EDIT_TOOL::editShapeProperties(), SCH_EDIT_FRAME::EditSheetProperties(), FOOTPRINT_EDITOR_CONTROL::EditTextAndGraphics(), GLOBAL_EDIT_TOOL::EditTextAndGraphics(), SYMBOL_EDITOR_EDIT_TOOL::editTextBoxProperties(), SYMBOL_EDITOR_EDIT_TOOL::editTextProperties(), EESCHEMA_JOBS_HANDLER::EESCHEMA_JOBS_HANDLER(), VIA_SIZE_MENU::eventHandler(), BOARD_EDITOR_CONTROL::ExportGenCAD(), BOARD_EDITOR_CONTROL::ExportIDF(), EDA_3D_CONTROLLER::ExportImage(), BOARD_EDITOR_CONTROL::ExportSTEP(), GERBVIEW_CONTROL::ExportToPcbnew(), BOARD_EDITOR_CONTROL::ExportVRML(), EDIT_TOOL::FilletTracks(), PCB_SELECTION_TOOL::filterSelection(), BOARD_EDITOR_CONTROL::GenerateDrillFiles(), BOARD_EDITOR_CONTROL::GenerateODBPPFiles(), BOARD_EDITOR_CONTROL::GeneratePosFile(), BOARD_EDITOR_CONTROL::GenIPC2581File(), GetChamferParams(), GetDogboneParams(), GetFootprintFromBoardByReference(), COLOR_SWATCH::GetNewSwatchColor(), GetRadiusParams(), GetSequentialPadNumberingParams(), GLOBAL_EDIT_TOOL::GlobalDeletions(), SCH_EDIT_TOOL::GlobalEdit(), COMMON_TOOLS::GridOrigin(), EDIT_TOOL::HealShapes(), SCH_EDIT_FRAME::importFile(), EE_GRAPHIC_TOOL::ImportGraphics(), SYMBOL_EDIT_FRAME::ImportSymbol(), SCH_EDITOR_CONTROL::IncrementAnnotations(), PCB_EDIT_FRAME::InstallNetlistFrame(), POSITION_RELATIVE_TOOL::InteractiveOffset(), InvokeCopperZonesEditor(), InvokeDialogNetList(), InvokeEditDesignBlockLibTable(), InvokeNonCopperZonesEditor(), InvokePcbLibTableEditor(), InvokeRuleAreaEditor(), InvokeSchEditSymbolLibTable(), PROJECT_SCH::LegacySchLibs(), GERBVIEW_FRAME::LoadGerberJobFile(), GERBVIEW_FRAME::LoadListOfGerberAndDrillFiles(), GERBVIEW_FRAME::LoadZipArchiveFile(), CONSTRAINT_EDIT_TOOL::ManageConstraints(), GLOBAL_EDIT_TOOL::Migrate3DModels(), SCH_EDIT_FRAME::ModalAnnotate(), EDIT_TOOL::MoveExact(), PCB_POINT_EDITOR::movePoint(), SIMULATOR_CONTROL::NewAnalysisTab(), KICAD_MANAGER_CONTROL::NewFromRepository(), KICAD_MANAGER_CONTROL::NewProject(), PANEL_JOBSET::OnAddDestinationClick(), PANEL_SETUP_BOARD_STACKUP::onAddDielectricLayer(), DIALOG_LIB_SYMBOL_PROPERTIES::OnAddFootprintFilter(), DIALOG_EXPORT_NETLIST::OnAddGenerator(), PANEL_GRID_SETTINGS::OnAddGrid(), PCB_NET_INSPECTOR_PANEL::onAddGroup(), PANEL_JOBSET::OnAddJobClick(), PCB_NET_INSPECTOR_PANEL::onAddNet(), PANEL_REGULATOR::OnAddRegulator(), DIALOG_BOARD_SETUP::onAuxiliaryAction(), DIALOG_SCHEMATIC_SETUP::onAuxiliaryAction(), PCB_EDIT_FRAME::OnBoardLoaded(), DIALOG_EXPORT_2581::onBomFieldsClick(), DIALOG_FIELDS_TABLE::onBomFmtPresetChanged(), DIALOG_FIELDS_TABLE::onBomPresetChanged(), PANEL_SETUP_BOARD_STACKUP::onColorSelected(), KICAD_MANAGER_FRAME::OnCompareProjectBranches(), PANEL_REMOTE_SYMBOL::onConfigure(), DIALOG_DRC::OnDRCItemRClick(), DIALOG_LIB_SYMBOL_PROPERTIES::OnEditFootprintFilter(), PANEL_GRID_SETTINGS::onEditGrid(), FOOTPRINT_EDIT_FRAME::OnEditItemRequest(), PCB_EDIT_FRAME::OnEditItemRequest(), PANEL_REGULATOR::OnEditRegulator(), DIALOG_LIB_SYMBOL_PROPERTIES::OnEditSpiceModel(), DIALOG_SYMBOL_PROPERTIES::OnEditSpiceModel(), DIALOG_ERC::OnERCItemRClick(), DIALOG_EXPORT_STEP::onExportButton(), PROJECT_TREE_PANE::onGitAmendCommit(), PROJECT_TREE_PANE::onGitCommit(), PROJECT_TREE_PANE::onGitInitializeProject(), PROJECT_TREE_PANE::onGitRemoteSettings(), PROJECT_TREE_PANE::onGitSwitchBranch(), LIB_TREE::onHeaderContextMenu(), PROPERTIES_FRAME::onHelp(), PANEL_DESTINATION::OnLastStatusClick(), APPEARANCE_CONTROLS::onLayerPresetChanged(), APPEARANCE_CONTROLS_3D::onLayerPresetChanged(), PANEL_SCH_DATA_SOURCES::OnManageDataSources(), DIALOG_PCM::OnManageRepositoriesClicked(), PANEL_SETUP_BOARD_STACKUP::onMaterialChange(), PANEL_FP_LIB_TABLE::onMigrateLibraries(), PANEL_DESTINATION::OnProperties(), PANEL_IMAGE_EDITOR::OnRemoveBackground(), PANEL_SETUP_BOARD_STACKUP::onRemoveDielectricLayer(), PCB_NET_INSPECTOR_PANEL::onRenameSelectedNet(), PANEL_PCBNEW_ACTION_PLUGINS::OnShowErrorsButtonClick(), DIALOG_VIA_STITCH_PROPERTIES::OnViaConfigureClicked(), APPEARANCE_CONTROLS::onViewportChanged(), APPEARANCE_CONTROLS_3D::onViewportChanged(), PCBNEW_JOBS_HANDLER::OpenDiffDialog(), PANEL_JOBSET::OpenJobOptionsForListItem(), DESIGN_BLOCK_GRID_TRICKS::optionsEditor(), FP_GRID_TRICKS::optionsEditor(), SYMBOL_GRID_TRICKS::optionsEditor(), CONVERT_TOOL::OutsetItems(), DIALOG_PAD_PROPERTIES::padValuesOK(), BOARD_EDITOR_CONTROL::PageSettings(), PL_EDITOR_CONTROL::PageSetup(), SCH_EDITOR_CONTROL::PageSetup(), PCB_CONTROL::Paste(), SCH_EDITOR_CONTROL::Paste(), PCBNEW_JOBS_HANDLER::PCBNEW_JOBS_HANDLER(), SCH_BASE_FRAME::PickSymbolFromLibrary(), SYMBOL_EDITOR_EDIT_TOOL::PinTable(), DRAWING_TOOL::PlaceImportedGraphics(), DRAWING_TOOL::PlaceMicroviaStack(), DRAWING_TOOL::PlaceTuningPattern(), SCH_EDITOR_CONTROL::Plot(), GERBVIEW_CONTROL::Print(), PCB_CONTROL::Print(), SCH_EDITOR_CONTROL::Print(), promptForGitCredentials(), HK_PROMPT_DIALOG::PromptForKey(), SCH_EDIT_TOOL::Properties(), PAD_TOOL::pushPadSettings(), GERBVIEW_FRAME::Read_EXCELLON_File(), GERBVIEW_FRAME::Read_GERBER_File(), CVPCB_MAINFRAME::readNetListAndFpFiles(), GLOBAL_EDIT_TOOL::RemoveUnusedPads(), MULTICHANNEL_TOOL::repeatLayout(), DIALOG_IMPORT_CHOOSE_PROJECT::RunModal(), DIALOG_MAP_LAYERS::RunModal(), PCBNEW_JOBS_HANDLER::runPcbMerge(), EESCHEMA_JOBS_HANDLER::runSchMerge(), PCB_EDIT_FRAME::SaveBoardAsDesignBlock(), FOOTPRINT_EDIT_FRAME::SaveFootprintAs(), ROUTER_TOOL::saveRouterDebugLog(), PCB_EDIT_FRAME::SaveSelectionAsDesignBlock(), SCH_EDIT_FRAME::SaveSelectionAsDesignBlock(), SCH_EDIT_FRAME::SaveSheetAsDesignBlock(), SYMBOL_EDIT_FRAME::saveSymbolCopyAs(), ROUTER_TOOL::SelectCopperLayerPair(), FOOTPRINT_EDIT_FRAME::SelectFootprintFromBoard(), FOOTPRINT_WIZARD_FRAME::SelectFootprintWizard(), PCB_BASE_EDIT_FRAME::SelectLibrary(), SCH_BASE_FRAME::SelectLibrary(), PCB_BASE_FRAME::SelectOneLayer(), GERBVIEW_FRAME::SelectPCBLayer(), GERBVIEW_FRAME::SetLayerDrawPrms(), ROUTER_TOOL::SettingsDialog(), PCB_BASE_EDIT_FRAME::ShowBarcodePropertiesDialog(), BOARD_INSPECTION_TOOL::ShowBoardStatistics(), SYMBOL_LIBRARY_ADAPTER::ShowConfigurationDialog(), SCH_EDITOR_CONTROL::ShowCreateNetChain(), PL_EDITOR_FRAME::ShowDesignInspector(), DIFF_PHASE_SKEW_TOOL::ShowDiffPhaseSkew(), CVPCB_CONTROL::ShowEquFileTable(), BOARD_INSPECTION_TOOL::ShowFootprintLinks(), PCB_BASE_EDIT_FRAME::ShowGridItemPropertiesDialog(), FOOTPRINT_EDITOR_CONTROL::ShowLibraryFieldsTable(), SYMBOL_EDITOR_CONTROL::ShowLibraryTable(), SIMULATOR_CONTROL::ShowNetlist(), KICAD_MANAGER_CONTROL::ShowPluginManager(), EDA_BASE_FRAME::ShowPreferences(), PCB_TUNING_PATTERN::ShowPropertiesDialog(), PCB_VIA_STACK::ShowPropertiesDialog(), PCB_VIA_STITCH::ShowPropertiesDialog(), BOARD_REANNOTATE_TOOL::ShowReannotateDialog(), PCB_BASE_EDIT_FRAME::ShowReferenceImagePropertiesDialog(), LOCAL_HISTORY::ShowRestoreDialog(), SCH_INSPECTION_TOOL::showSchematicComparison(), SCH_EDIT_FRAME::ShowSchematicSetupDialog(), MATCH_PROPERTIES_TOOL::showSettingsDialog(), PCB_EDIT_FRAME::ShowTargetOptionsDialog(), EDIT_TOOL::SimplifyPolygons(), SCH_DRAWING_TOOLS::SingleClickPlace(), GLOBAL_EDIT_TOOL::SwapLayers(), DIALOG_IMPORT_GFX_SCH::TransferDataFromWindow(), DIALOG_IMPORT_GRAPHICS::TransferDataFromWindow(), PANEL_SETUP_LAYERS::TransferDataFromWindow(), EDA_3D_VIEWER_FRAME::TryBefore(), PCB_BASE_EDIT_FRAME::TryBefore(), SYMBOL_EDITOR_DRAWING_TOOLS::TwoClickPlace(), SCH_EDIT_FRAME::UpdateDesignBlockFromSheet(), SCH_EDITOR_CONTROL::UpdateFromPCB(), BOARD_EDITOR_CONTROL::UpdatePCBFromSchematic(), SYMBOL_EDITOR_EDIT_TOOL::UpdateSymbolFields(), DIALOG_SHAPE_PROPERTIES::Validate(), and PANEL_PREVIEW_3D_MODEL::View3DSettings().

ShowQuasiModal()

int DIALOG_SHIM::ShowQuasiModal ( )

inherited

Definition at line 1645 of file dialog_shim.cpp.

References focusParentCanvas(), m_qmodal_loop, m_qmodal_parent_disabler, m_qmodal_showing, KIPLATFORM::UI::ReparentModal(), and Show().

Referenced by PANEL_FP_PROPERTIES_3D_MODEL::Cfg3DPath(), DIALOG_SELECT_3DMODEL::Cfg3DPaths(), SCH_EDIT_TOOL::ChangeSymbols(), MICROWAVE_TOOL::createFootprint(), MICROWAVE_TOOL::createMicrowaveInductor(), SCH_DRAWING_TOOLS::createNewLabel(), SCH_DRAWING_TOOLS::createNewText(), EE_GRAPHIC_TOOL::DrawShape(), DRAWING_TOOL::DrawTable(), SCH_DRAWING_TOOLS::DrawTable(), SYMBOL_EDITOR_EDIT_TOOL::editFieldProperties(), SCH_EDIT_TOOL::editFieldText(), FOOTPRINT_EDIT_FRAME::editFootprintProperties(), FOOTPRINT_EDITOR_CONTROL::editFootprintPropertiesFromLibrary(), SCH_EDIT_TOOL::EditProperties(), SYMBOL_EDITOR_EDIT_TOOL::EditSymbolPinMaps(), SYMBOL_EDITOR_EDIT_TOOL::editSymbolProperties(), SYMBOL_EDITOR_EDIT_TOOL::editSymbolPropertiesFromLibrary(), PCB_EDIT_TABLE_TOOL::EditTable(), SCH_EDIT_TABLE_TOOL::EditTable(), GLOBAL_EDIT_TOOL::EditTeardrops(), GLOBAL_EDIT_TOOL::EditTracksAndVias(), SIMULATOR_CONTROL::EditUserDefinedSignals(), GLOBAL_EDIT_TOOL::ExchangeFootprints(), DRC_TOOL::FixDRCError(), SCH_EDIT_TOOL::FixERCError(), BOARD_EDITOR_CONTROL::GenerateGerbers(), InvokeDialogCreateBOM(), InvokeDialogEditSymbolsLibId(), InvokeDialogRescueEach(), PANEL_FP_PROPERTIES_3D_MODEL::OnAdd3DModel(), FOOTPRINT_EDIT_FRAME::OnEditItemRequest(), PCB_EDIT_FRAME::OnEditItemRequest(), SCH_PROPERTIES_PANEL::onEditPinMap(), PANEL_JOBSET::OpenJobOptionsForListItem(), SCH_EDIT_FRAME::OpenProjectFiles(), PAD_TOOL::PadTable(), DRAWING_TOOL::PlaceText(), BOARD_EDITOR_CONTROL::Plot(), EDIT_TOOL::Properties(), SCH_EDIT_TOOL::Properties(), SCH_EDITOR_CONTROL::RemapSymbols(), PCB_EDIT_FRAME::ShowBoardSetupDialog(), PCB_EDIT_FRAME::ShowExchangeFootprintsDialog(), PCB_EDIT_FRAME::ShowFootprintPropertiesDialog(), PCB_BASE_EDIT_FRAME::ShowGraphicItemPropertiesDialog(), PCB_BASE_FRAME::ShowPadPropertiesDialog(), PCB_BASE_EDIT_FRAME::ShowTextBoxPropertiesDialog(), PCB_BASE_EDIT_FRAME::ShowTextPropertiesDialog(), and GLOBAL_EDIT_TOOL::ZonesManager().

TearDownQuasiModal()

virtual void DIALOG_SHIM::TearDownQuasiModal ( )

inlineprotectedvirtualinherited

Override this method to perform dialog tear down actions not suitable for object dtor.

Warning

This only gets called for dialogs that are shown in the quasimodal mode. If you need to perform tear down actions in modal or modeless dialogs, create a close window event handler.

Definition at line 272 of file dialog_shim.h.

Referenced by EndQuasiModal().

TransferDataFromWindow()

bool DIALOG_DRILL_CHART_PROPERTIES::TransferDataFromWindow ( )

overrideprivate

Definition at line 314 of file dialog_drill_chart_properties.cpp.

References _, BOARD::BumpDrillModelGeneration(), DisplayError(), filter, BOARD::GetDesignSettings(), BOARD_DESIGN_SETTINGS::GetDrillSymbolProfile(), DRILL_SYMBOL_PROFILE::GroupKeys(), harvestColumnGrid(), DIALOG_DRILL_CHART_PROPERTIES_BASE::m_borderCheckbox, m_borderWidth, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_cbLocked, m_chart, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_colSeparators, m_columns, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_filterBackdrills, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_filterCastellated, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_filterNonPlated, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_filterPlated, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_filterSlots, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_filterVias, m_frame, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_headerBorder, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_LayerSelectionCtrl, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_precisionCtrl, m_profile, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_rowSeparators, m_separatorsWidth, m_shown, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_showTotals, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_unitsCtrl, COMMIT::Modify(), BOARD_COMMIT::Push(), DRILL_SYMBOL_PROFILE::SetGroupedBy(), STROKE_PARAMS::SetWidth(), SKIP_CONNECTIVITY, and ToLAYER_ID().

TransferDataToWindow()

bool DIALOG_DRILL_CHART_PROPERTIES::TransferDataToWindow ( )

overrideprivate

Definition at line 232 of file dialog_drill_chart_properties.cpp.

References DRILL_CHART_TEMPLATE::Columns(), fillColumnGrid(), filter, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_borderCheckbox, m_borderWidth, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_cbLocked, m_chart, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_colSeparators, m_columns, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_filterBackdrills, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_filterCastellated, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_filterNonPlated, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_filterPlated, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_filterSlots, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_filterVias, m_frame, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_headerBorder, DRILL_CHART_COLUMN::m_Heading, DRILL_CHART_COLUMN::m_Id, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_LayerSelectionCtrl, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_notebook, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_precisionCtrl, m_profile, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_rowSeparators, m_separatorsWidth, m_shown, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_showTotals, DIALOG_DRILL_CHART_PROPERTIES_BASE::m_unitsCtrl, and DRILL_CHART_TEMPLATE::MakeDefault().

UnregisterUnitBinder()

void DIALOG_SHIM::UnregisterUnitBinder ( UNIT_BINDER * aUnitBinder )

inherited

Remove a UNIT_BINDER from the control-state save/restore map.

Called from ~UNIT_BINDER so that a destroyed binder never leaves a dangling pointer behind for SaveControlState()/LoadControlState() to dereference when a later control reuses the freed window's address.

Parameters

aUnitBinder

the binder being destroyed

Definition at line 1007 of file dialog_shim.cpp.

References m_unitBinders.

unregisterUnitBinders()

void DIALOG_SHIM::unregisterUnitBinders ( wxWindow * aWindow )

protectedinherited

Remove UNIT_BINDER registrations for a window and all its descendants.

Call before destroying a panel whose children have registered unit binders.

Parameters

aWindow

The root window whose subtree should be unregistered.

Definition at line 1742 of file dialog_shim.cpp.

References m_unitBinders, and unregisterUnitBinders().

Referenced by RULE_EDITOR_DIALOG_BASE::SetContentPanel(), and unregisterUnitBinders().

vertPixelsFromDU()

int DIALOG_SHIM::vertPixelsFromDU ( int y ) const

protectedinherited

Convert an integer number of dialog units to pixels, vertically.

See SetSizeInDU or wxDialog documentation for more information.

Definition at line 434 of file dialog_shim.cpp.

Member Data Documentation

m_appearancePanel

wxPanel* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_appearancePanel

protectedinherited

Definition at line 75 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE().

m_beforeEditValues

std::map<wxWindow*, wxString> DIALOG_SHIM::m_beforeEditValues

protectedinherited

Definition at line 395 of file dialog_shim.h.

Referenced by OnCharHook(), onChildSetFocus(), and SelectAllInTextCtrls().

m_borderCheckbox

wxCheckBox* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_borderCheckbox

protectedinherited

Definition at line 76 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE(), DIALOG_DRILL_CHART_PROPERTIES::onBorderChecked(), DIALOG_DRILL_CHART_PROPERTIES::TransferDataFromWindow(), DIALOG_DRILL_CHART_PROPERTIES::TransferDataToWindow(), and ~DIALOG_DRILL_CHART_PROPERTIES_BASE().

m_borderWidth

UNIT_BINDER DIALOG_DRILL_CHART_PROPERTIES::m_borderWidth

private

Definition at line 102 of file dialog_drill_chart_properties.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES(), onBorderChecked(), TransferDataFromWindow(), and TransferDataToWindow().

m_borderWidthCtrl

wxTextCtrl* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_borderWidthCtrl

protectedinherited

Definition at line 81 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES::DIALOG_DRILL_CHART_PROPERTIES(), and DIALOG_DRILL_CHART_PROPERTIES_BASE().

m_borderWidthLabel

wxStaticText* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_borderWidthLabel

protectedinherited

Definition at line 80 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES::DIALOG_DRILL_CHART_PROPERTIES(), and DIALOG_DRILL_CHART_PROPERTIES_BASE().

m_borderWidthUnits

wxStaticText* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_borderWidthUnits

protectedinherited

Definition at line 82 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES::DIALOG_DRILL_CHART_PROPERTIES(), and DIALOG_DRILL_CHART_PROPERTIES_BASE().

m_cbLocked

wxCheckBox* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_cbLocked

protectedinherited

Definition at line 67 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE(), DIALOG_DRILL_CHART_PROPERTIES::TransferDataFromWindow(), and DIALOG_DRILL_CHART_PROPERTIES::TransferDataToWindow().

m_chart

PCB_DRILL_CHART* DIALOG_DRILL_CHART_PROPERTIES::m_chart

private

Definition at line 86 of file dialog_drill_chart_properties.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES(), TransferDataFromWindow(), and TransferDataToWindow().

m_childReleased

bool DIALOG_SHIM::m_childReleased

protectedinherited

Definition at line 411 of file dialog_shim.h.

Referenced by DIALOG_SHIM(), and OnMove().

m_colSeparators

wxCheckBox* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_colSeparators

protectedinherited

Definition at line 79 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE(), DIALOG_DRILL_CHART_PROPERTIES::onBorderChecked(), DIALOG_DRILL_CHART_PROPERTIES::TransferDataFromWindow(), and DIALOG_DRILL_CHART_PROPERTIES::TransferDataToWindow().

m_columnGrid

WX_GRID* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_columnGrid

protectedinherited

Definition at line 69 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES::DIALOG_DRILL_CHART_PROPERTIES(), DIALOG_DRILL_CHART_PROPERTIES_BASE(), DIALOG_DRILL_CHART_PROPERTIES::fillColumnGrid(), DIALOG_DRILL_CHART_PROPERTIES::fitColumnGrid(), DIALOG_DRILL_CHART_PROPERTIES::harvestColumnGrid(), and DIALOG_DRILL_CHART_PROPERTIES::moveColumn().

m_columns

std::vector<DRILL_CHART_COLUMN> DIALOG_DRILL_CHART_PROPERTIES::m_columns

private

Every known column, checked ones first in chart order.

Held here rather than in the grid so a heading survives being unchecked and rechecked.

Definition at line 98 of file dialog_drill_chart_properties.h.

Referenced by applyTemplate(), fillColumnGrid(), harvestColumnGrid(), moveColumn(), onExportTemplate(), TransferDataFromWindow(), and TransferDataToWindow().

m_columnsPanel

wxPanel* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_columnsPanel

protectedinherited

Definition at line 68 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE().

m_contentsPanel

wxPanel* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_contentsPanel

protectedinherited

Definition at line 53 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE().

m_controlsWithPendingChanges

std::set<wxWindow*> DIALOG_SHIM::m_controlsWithPendingChanges

protectedinherited

Definition at line 408 of file dialog_shim.h.

Referenced by flushPendingControlChanges(), recordControlChange(), and resetUndoRedoForNewContent().

m_currentValues

std::map<wxWindow*, wxVariant> DIALOG_SHIM::m_currentValues

protectedinherited

Definition at line 407 of file dialog_shim.h.

Referenced by doRedo(), doUndo(), flushPendingControlChanges(), registerUndoRedoHandlers(), and resetUndoRedoForNewContent().

m_exportTemplateButton

wxButton* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_exportTemplateButton

protectedinherited

Definition at line 74 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE(), and ~DIALOG_DRILL_CHART_PROPERTIES_BASE().

m_filterBackdrills

wxCheckBox* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_filterBackdrills

protectedinherited

Definition at line 64 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE(), DIALOG_DRILL_CHART_PROPERTIES::TransferDataFromWindow(), and DIALOG_DRILL_CHART_PROPERTIES::TransferDataToWindow().

m_filterCastellated

wxCheckBox* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_filterCastellated

protectedinherited

Definition at line 65 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE(), DIALOG_DRILL_CHART_PROPERTIES::TransferDataFromWindow(), and DIALOG_DRILL_CHART_PROPERTIES::TransferDataToWindow().

m_filterNonPlated

wxCheckBox* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_filterNonPlated

protectedinherited

Definition at line 61 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE(), DIALOG_DRILL_CHART_PROPERTIES::TransferDataFromWindow(), and DIALOG_DRILL_CHART_PROPERTIES::TransferDataToWindow().

m_filterPlated

wxCheckBox* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_filterPlated

protectedinherited

Definition at line 60 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE(), DIALOG_DRILL_CHART_PROPERTIES::TransferDataFromWindow(), and DIALOG_DRILL_CHART_PROPERTIES::TransferDataToWindow().

m_filterSlots

wxCheckBox* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_filterSlots

protectedinherited

Definition at line 63 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE(), DIALOG_DRILL_CHART_PROPERTIES::TransferDataFromWindow(), and DIALOG_DRILL_CHART_PROPERTIES::TransferDataToWindow().

m_filterVias

wxCheckBox* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_filterVias

protectedinherited

Definition at line 62 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE(), DIALOG_DRILL_CHART_PROPERTIES::TransferDataFromWindow(), and DIALOG_DRILL_CHART_PROPERTIES::TransferDataToWindow().

m_firstPaintEvent

bool DIALOG_SHIM::m_firstPaintEvent

protectedinherited

Definition at line 376 of file dialog_shim.h.

Referenced by DIALOG_SHIM(), OnActivate(), and OnPaint().

m_frame

PCB_BASE_EDIT_FRAME* DIALOG_DRILL_CHART_PROPERTIES::m_frame

private

Definition at line 85 of file dialog_drill_chart_properties.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES(), onBorderChecked(), TransferDataFromWindow(), and TransferDataToWindow().

m_handlingUndoRedo

bool DIALOG_SHIM::m_handlingUndoRedo

protectedinherited

Definition at line 410 of file dialog_shim.h.

Referenced by DIALOG_SHIM(), doRedo(), doUndo(), onCommandEvent(), onDataViewListChanged(), onGridCellChanged(), onPropertyGridChanged(), onSpinDoubleEvent(), onSpinEvent(), and onStyledTextChanged().

m_hash_key

std::string DIALOG_SHIM::m_hash_key

protectedinherited

Definition at line 367 of file dialog_shim.h.

Referenced by CONVERT_SETTINGS_DIALOG::CONVERT_SETTINGS_DIALOG(), DIALOG_CHANGE_SYMBOLS::DIALOG_CHANGE_SYMBOLS(), DIALOG_EXCHANGE_FOOTPRINTS::DIALOG_EXCHANGE_FOOTPRINTS(), DIALOG_EXPORT_2581::DIALOG_EXPORT_2581(), DIALOG_EXPORT_2581::DIALOG_EXPORT_2581(), DIALOG_EXPORT_NETLIST::DIALOG_EXPORT_NETLIST(), DIALOG_EXPORT_ODBPP::DIALOG_EXPORT_ODBPP(), DIALOG_EXPORT_ODBPP::DIALOG_EXPORT_ODBPP(), DIALOG_EXPORT_STEP::DIALOG_EXPORT_STEP(), DIALOG_FOOTPRINT_FIELDS_TABLE::DIALOG_FOOTPRINT_FIELDS_TABLE(), DIALOG_GEN_FOOTPRINT_POSITION::DIALOG_GEN_FOOTPRINT_POSITION(), DIALOG_GEN_FOOTPRINT_POSITION::DIALOG_GEN_FOOTPRINT_POSITION(), DIALOG_GENCAD_EXPORT_OPTIONS::DIALOG_GENCAD_EXPORT_OPTIONS(), DIALOG_GENDRILL::DIALOG_GENDRILL(), DIALOG_GENDRILL::DIALOG_GENDRILL(), DIALOG_GRID_ITEM_PROPERTIES::DIALOG_GRID_ITEM_PROPERTIES(), DIALOG_LABEL_PROPERTIES::DIALOG_LABEL_PROPERTIES(), DIALOG_MOVE_EXACT::DIALOG_MOVE_EXACT(), DIALOG_PLOT::DIALOG_PLOT(), DIALOG_PLOT_SCHEMATIC::DIALOG_PLOT_SCHEMATIC(), DIALOG_SHAPE_PROPERTIES::DIALOG_SHAPE_PROPERTIES(), DIALOG_SHAPE_PROPERTIES::DIALOG_SHAPE_PROPERTIES(), DIALOG_SYMBOL_FIELDS_TABLE::DIALOG_SYMBOL_FIELDS_TABLE(), DIALOG_TEXT_PROPERTIES::DIALOG_TEXT_PROPERTIES(), DIALOG_TEXT_PROPERTIES::DIALOG_TEXT_PROPERTIES(), EDA_LIST_DIALOG::EDA_LIST_DIALOG(), EDA_REORDERABLE_LIST_DIALOG::EDA_REORDERABLE_LIST_DIALOG(), LoadControlState(), PAGED_DIALOG::PAGED_DIALOG(), resetSize(), SaveControlState(), Show(), WX_MULTI_ENTRY_DIALOG::WX_MULTI_ENTRY_DIALOG(), WX_PT_ENTRY_DIALOG::WX_PT_ENTRY_DIALOG(), WX_TEXT_ENTRY_DIALOG::WX_TEXT_ENTRY_DIALOG(), and WX_UNIT_ENTRY_DIALOG::WX_UNIT_ENTRY_DIALOG().

m_headerBorder

wxCheckBox* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_headerBorder

protectedinherited

Definition at line 77 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE(), DIALOG_DRILL_CHART_PROPERTIES::onBorderChecked(), DIALOG_DRILL_CHART_PROPERTIES::TransferDataFromWindow(), and DIALOG_DRILL_CHART_PROPERTIES::TransferDataToWindow().

m_importTemplateButton

wxButton* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_importTemplateButton

protectedinherited

Definition at line 73 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE(), and ~DIALOG_DRILL_CHART_PROPERTIES_BASE().

m_infoBar

WX_INFOBAR* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_infoBar

protectedinherited

Definition at line 51 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE().

m_initialFocusTarget

wxWindow* DIALOG_SHIM::m_initialFocusTarget

protectedinherited

Definition at line 377 of file dialog_shim.h.

Referenced by DIALOG_SHIM(), forceInitialFocus(), NETLIST_DIALOG_ADD_GENERATOR::NETLIST_DIALOG_ADD_GENERATOR(), and SetInitialFocus().

m_initialSize

wxSize DIALOG_SHIM::m_initialSize

protectedinherited

Definition at line 390 of file dialog_shim.h.

Referenced by DIALOG_SHIM(), RULE_EDITOR_DIALOG_BASE::finishInitialization(), Show(), and DIALOG_DRC_RULE_EDITOR::TransferDataToWindow().

m_isClosing

bool DIALOG_SHIM::m_isClosing

protectedinherited

Definition at line 378 of file dialog_shim.h.

Referenced by DIALOG_SHIM(), onChildSetFocus(), and ~DIALOG_SHIM().

m_kiway

KIWAY* KIWAY_HOLDER::m_kiway

privateinherited

Definition at line 85 of file kiway_holder.h.

Referenced by HasKiway(), Kiway(), KIWAY_HOLDER(), and SetKiway().

m_layerLabel

wxStaticText* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_layerLabel

protectedinherited

Definition at line 54 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE().

m_LayerSelectionCtrl

PCB_LAYER_BOX_SELECTOR* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_LayerSelectionCtrl

protectedinherited

Definition at line 55 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES::DIALOG_DRILL_CHART_PROPERTIES(), DIALOG_DRILL_CHART_PROPERTIES_BASE(), DIALOG_DRILL_CHART_PROPERTIES::onBorderChecked(), DIALOG_DRILL_CHART_PROPERTIES::TransferDataFromWindow(), and DIALOG_DRILL_CHART_PROPERTIES::TransferDataToWindow().

m_moveDownButton

wxButton* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_moveDownButton

protectedinherited

Definition at line 71 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE(), and ~DIALOG_DRILL_CHART_PROPERTIES_BASE().

m_moveUpButton

wxButton* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_moveUpButton

protectedinherited

Definition at line 70 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE(), and ~DIALOG_DRILL_CHART_PROPERTIES_BASE().

m_noControlUndoRedo

std::set<wxWindow*> DIALOG_SHIM::m_noControlUndoRedo

protectedinherited

Definition at line 409 of file dialog_shim.h.

Referenced by ExcludeFromControlUndoRedo(), and registerUndoRedoHandlers().

m_notebook

wxNotebook* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_notebook

protectedinherited

Definition at line 52 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE(), and DIALOG_DRILL_CHART_PROPERTIES::TransferDataToWindow().

m_parentFrame

EDA_BASE_FRAME* DIALOG_SHIM::m_parentFrame

protectedinherited

Definition at line 385 of file dialog_shim.h.

Referenced by DIALOG_MAP_LAYERS::DIALOG_MAP_LAYERS(), DIALOG_SHIM(), focusParentCanvas(), DIALOG_FIELDS_TABLE::onBomSettingsChanged(), OnCharHook(), DIALOG_LIB_SYMBOL_PROPERTIES::OnEditSpiceModel(), DIALOG_SYMBOL_PROPERTIES::OnEditSpiceModel(), DIALOG_FIELDS_TABLE::OnExport(), DIALOG_FIELDS_TABLE::OnOutputFileBrowseClicked(), DIALOG_PAGES_SETTINGS::OnWksFileSelection(), DIALOG_PAD_PROPERTIES::padValuesOK(), DIALOG_MAP_LAYERS::RunModal(), DIALOG_LABEL_PROPERTIES::TransferDataFromWindow(), DIALOG_ANNOTATE::TransferDataToWindow(), DIALOG_POSITION_RELATIVE::updateAnchorInfo(), and DIALOG_ANNOTATE::~DIALOG_ANNOTATE().

m_precisionCtrl

wxSpinCtrl* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_precisionCtrl

protectedinherited

Definition at line 59 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE(), DIALOG_DRILL_CHART_PROPERTIES::onExportTemplate(), DIALOG_DRILL_CHART_PROPERTIES::onImportTemplate(), DIALOG_DRILL_CHART_PROPERTIES::TransferDataFromWindow(), and DIALOG_DRILL_CHART_PROPERTIES::TransferDataToWindow().

m_precisionLabel

wxStaticText* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_precisionLabel

protectedinherited

Definition at line 58 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE().

m_profile

DRILL_SYMBOL_PROFILE DIALOG_DRILL_CHART_PROPERTIES::m_profile

private

The board's grouping, edited through the Group By column.

Applied on OK, so cancelling leaves every other chart and map on the board as it was.

Definition at line 92 of file dialog_drill_chart_properties.h.

Referenced by fillColumnGrid(), harvestColumnGrid(), TransferDataFromWindow(), and TransferDataToWindow().

m_qmodal_loop

wxGUIEventLoop* DIALOG_SHIM::m_qmodal_loop

protectedinherited

Definition at line 380 of file dialog_shim.h.

Referenced by DIALOG_SHIM(), EndQuasiModal(), and ShowQuasiModal().

m_qmodal_parent_disabler

WINDOW_DISABLER* DIALOG_SHIM::m_qmodal_parent_disabler

protectedinherited

Definition at line 383 of file dialog_shim.h.

Referenced by CleanupAfterModalSubDialog(), DIALOG_SHIM(), EndQuasiModal(), PrepareForModalSubDialog(), ShowQuasiModal(), and ~DIALOG_SHIM().

m_qmodal_showing

bool DIALOG_SHIM::m_qmodal_showing

protectedinherited

Definition at line 382 of file dialog_shim.h.

Referenced by DIALOG_SHIM(), IsQuasiModal(), and ShowQuasiModal().

m_redoStack

std::vector<UNDO_STEP> DIALOG_SHIM::m_redoStack

protectedinherited

Definition at line 406 of file dialog_shim.h.

Referenced by doRedo(), doUndo(), flushPendingControlChanges(), and resetUndoRedoForNewContent().

m_resetColumnsButton

wxButton* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_resetColumnsButton

protectedinherited

Definition at line 72 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE(), and ~DIALOG_DRILL_CHART_PROPERTIES_BASE().

m_rowSeparators

wxCheckBox* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_rowSeparators

protectedinherited

Definition at line 78 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE(), DIALOG_DRILL_CHART_PROPERTIES::onBorderChecked(), DIALOG_DRILL_CHART_PROPERTIES::TransferDataFromWindow(), and DIALOG_DRILL_CHART_PROPERTIES::TransferDataToWindow().

m_sdbSizer

wxStdDialogButtonSizer* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_sdbSizer

protectedinherited

Definition at line 86 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE().

m_sdbSizerCancel

wxButton* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_sdbSizerCancel

protectedinherited

Definition at line 88 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE().

m_sdbSizerOK

wxButton* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_sdbSizerOK

protectedinherited

Definition at line 87 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE().

m_separatorsWidth

UNIT_BINDER DIALOG_DRILL_CHART_PROPERTIES::m_separatorsWidth

private

Definition at line 103 of file dialog_drill_chart_properties.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES(), onBorderChecked(), TransferDataFromWindow(), and TransferDataToWindow().

m_separatorsWidthCtrl

wxTextCtrl* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_separatorsWidthCtrl

protectedinherited

Definition at line 84 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES::DIALOG_DRILL_CHART_PROPERTIES(), and DIALOG_DRILL_CHART_PROPERTIES_BASE().

m_separatorsWidthLabel

wxStaticText* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_separatorsWidthLabel

protectedinherited

Definition at line 83 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES::DIALOG_DRILL_CHART_PROPERTIES(), and DIALOG_DRILL_CHART_PROPERTIES_BASE().

m_separatorsWidthUnits

wxStaticText* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_separatorsWidthUnits

protectedinherited

Definition at line 85 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES::DIALOG_DRILL_CHART_PROPERTIES(), and DIALOG_DRILL_CHART_PROPERTIES_BASE().

m_shown

std::vector<bool> DIALOG_DRILL_CHART_PROPERTIES::m_shown

private

Definition at line 99 of file dialog_drill_chart_properties.h.

Referenced by applyTemplate(), fillColumnGrid(), harvestColumnGrid(), moveColumn(), onExportTemplate(), TransferDataFromWindow(), and TransferDataToWindow().

m_showTotals

wxCheckBox* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_showTotals

protectedinherited

Definition at line 66 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE(), DIALOG_DRILL_CHART_PROPERTIES::onExportTemplate(), DIALOG_DRILL_CHART_PROPERTIES::onImportTemplate(), DIALOG_DRILL_CHART_PROPERTIES::TransferDataFromWindow(), and DIALOG_DRILL_CHART_PROPERTIES::TransferDataToWindow().

m_tabOrder

std::vector<wxWindow*> DIALOG_SHIM::m_tabOrder

protectedinherited

Definition at line 387 of file dialog_shim.h.

Referenced by DIALOG_FOOTPRINT_PROPERTIES::DIALOG_FOOTPRINT_PROPERTIES(), DIALOG_MOVE_EXACT::DIALOG_MOVE_EXACT(), DIALOG_PIN_PROPERTIES::DIALOG_PIN_PROPERTIES(), DIALOG_POSITION_RELATIVE::DIALOG_POSITION_RELATIVE(), DIALOG_SCH_FIND::DIALOG_SCH_FIND(), DIALOG_TEXT_PROPERTIES::DIALOG_TEXT_PROPERTIES(), and OnCharHook().

m_type

HOLDER_TYPE KIWAY_HOLDER::m_type

privateinherited

Definition at line 86 of file kiway_holder.h.

Referenced by GetType(), and KIWAY_HOLDER().

m_undoStack

std::vector<UNDO_STEP> DIALOG_SHIM::m_undoStack

protectedinherited

Definition at line 405 of file dialog_shim.h.

Referenced by doRedo(), doUndo(), flushPendingControlChanges(), and resetUndoRedoForNewContent().

m_unitBinders

std::map<wxWindow*, UNIT_BINDER*> DIALOG_SHIM::m_unitBinders

protectedinherited

Definition at line 396 of file dialog_shim.h.

Referenced by LoadControlState(), RegisterUnitBinder(), SaveControlState(), UnregisterUnitBinder(), unregisterUnitBinders(), and ~DIALOG_SHIM().

m_units

EDA_UNITS DIALOG_SHIM::m_units

protectedinherited

Definition at line 366 of file dialog_shim.h.

Referenced by DIALOG_GEN_FOOTPRINT_POSITION::DIALOG_GEN_FOOTPRINT_POSITION(), DIALOG_SHIM(), GetUserUnits(), DIALOG_GEN_FOOTPRINT_POSITION::onGenerate(), and DIALOG_GENERATORS::onUnitsChanged().

m_unitsCtrl

wxChoice* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_unitsCtrl

protectedinherited

Definition at line 57 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE(), DIALOG_DRILL_CHART_PROPERTIES::onExportTemplate(), DIALOG_DRILL_CHART_PROPERTIES::onImportTemplate(), DIALOG_DRILL_CHART_PROPERTIES::TransferDataFromWindow(), and DIALOG_DRILL_CHART_PROPERTIES::TransferDataToWindow().

m_unitsLabel

wxStaticText* DIALOG_DRILL_CHART_PROPERTIES_BASE::m_unitsLabel

protectedinherited

Definition at line 56 of file dialog_drill_chart_properties_base.h.

Referenced by DIALOG_DRILL_CHART_PROPERTIES_BASE().

m_useCalculatedSize

bool DIALOG_SHIM::m_useCalculatedSize

protectedinherited

Definition at line 371 of file dialog_shim.h.

Referenced by DIALOG_TRACK_VIA_PROPERTIES::commonInit(), DIALOG_SHIM(), PCB_ONE_LAYER_SELECTOR::PCB_ONE_LAYER_SELECTOR(), and Show().

m_userPositioned

bool DIALOG_SHIM::m_userPositioned

protectedinherited

Definition at line 391 of file dialog_shim.h.

Referenced by DIALOG_SHIM(), OnMove(), and Show().

m_userResized

bool DIALOG_SHIM::m_userResized

protectedinherited

Definition at line 392 of file dialog_shim.h.

Referenced by DIALOG_SHIM(), OnSize(), and Show().

---

The documentation for this class was generated from the following files:

• dialog_drill_chart_properties.h
• dialog_drill_chart_properties.cpp