FOOTPRINT_EDITOR_CONTROL Class Reference

Module editor specific tools. More...

#include <footprint_editor_control.h>

Inheritance diagram for FOOTPRINT_EDITOR_CONTROL:

Public Types
enum	RESET_REASON {   RUN , MODEL_RELOAD , SUPERMODEL_RELOAD , GAL_SWITCH ,   REDRAW }
	Determine the reason of reset for a tool. More...

Public Member Functions
	FOOTPRINT_EDITOR_CONTROL ()
	~FOOTPRINT_EDITOR_CONTROL () override
void	Reset (RESET_REASON aReason) override
	Bring the tool to a known, initial state.
bool	Init () override
	Init() is called once upon a registration of the tool.
int	NewFootprint (const TOOL_EVENT &aEvent)
int	CreateFootprint (const TOOL_EVENT &aEvent)
int	Save (const TOOL_EVENT &aEvent)
int	SaveAs (const TOOL_EVENT &aEvent)
int	Revert (const TOOL_EVENT &aEvent)
int	EditFootprint (const TOOL_EVENT &aEvent)
int	CutCopyFootprint (const TOOL_EVENT &aEvent)
int	PasteFootprint (const TOOL_EVENT &aEvent)
int	DuplicateFootprint (const TOOL_EVENT &aEvent)
int	RenameFootprint (const TOOL_EVENT &aEvent)
int	DeleteFootprint (const TOOL_EVENT &aEvent)
int	ImportFootprint (const TOOL_EVENT &aEvent)
int	ExportFootprint (const TOOL_EVENT &aEvent)
int	OpenWithTextEditor (const TOOL_EVENT &aEvent)
int	PinLibrary (const TOOL_EVENT &aEvent)
int	UnpinLibrary (const TOOL_EVENT &aEvent)
int	ToggleFootprintTree (const TOOL_EVENT &aEvent)
int	ToggleLayersManager (const TOOL_EVENT &aEvent)
int	ToggleProperties (const TOOL_EVENT &aEvent)
int	Properties (const TOOL_EVENT &aEvent)
int	EditTextAndGraphics (const TOOL_EVENT &aEvent)
int	CheckFootprint (const TOOL_EVENT &aEvent)
void	CrossProbe (const PCB_MARKER *aMarker)
void	DestroyCheckerDialog ()
int	CleanupGraphics (const TOOL_EVENT &aEvent)
int	RepairFootprint (const TOOL_EVENT &aEvent)
int	DefaultPadProperties (const TOOL_EVENT &aEvent)
	Edit the properties used for new pad creation.
void	SetIsFootprintEditor (bool aEnabled)
	Function SetIsFootprintEditor()
bool	IsFootprintEditor () const
void	SetIsBoardEditor (bool aEnabled)
bool	IsBoardEditor () const
virtual bool	Is45Limited () const
	Should the tool use its 45° mode option?
void	Activate ()
	Run the tool.
TOOL_MENU &	GetToolMenu ()
void	SetContextMenu (ACTION_MENU *aMenu, CONTEXT_MENU_TRIGGER aTrigger=CMENU_BUTTON)
	Assign a context menu and tells when it should be activated.
void	RunMainStack (std::function< void()> aFunc)
	Call a function using the main stack.
template<class T >
void	Go (int(T::*aStateFunc)(const TOOL_EVENT &), const TOOL_EVENT_LIST &aConditions=TOOL_EVENT(TC_ANY, TA_ANY))
	Define which state (aStateFunc) to go when a certain event arrives (aConditions).
TOOL_EVENT *	Wait (const TOOL_EVENT_LIST &aEventList=TOOL_EVENT(TC_ANY, TA_ANY))
	Suspend execution of the tool until an event specified in aEventList arrives.
TOOL_TYPE	GetType () const
	Return the type of the tool.
TOOL_ID	GetId () const
	Return the unique identifier of the tool.
const std::string &	GetName () const
	Return the name of the tool.
TOOL_MANAGER *	GetManager () const
	Return the instance of TOOL_MANAGER that takes care of the tool.
bool	IsToolActive () const

Protected Types
enum	INTERACTIVE_PLACEMENT_OPTIONS { IPO_ROTATE = 0x01 , IPO_FLIP = 0x02 , IPO_SINGLE_CLICK = 0x04 , IPO_REPEAT = 0x08 }
	Options for placing items interactively. More...

Protected Member Functions
void	doInteractiveItemPlacement (const TOOL_EVENT &aTool, INTERACTIVE_PLACER_BASE *aPlacer, const wxString &aCommitMessage, int aOptions=IPO_ROTATE|IPO_FLIP|IPO_REPEAT)
	Helper function for performing a common interactive idiom: wait for a left click, place an item there (perhaps with a dialog or other user interaction), then have it move with the mouse and respond to rotate/flip, etc.
KIGFX::PCB_VIEW *	view () const
KIGFX::VIEW_CONTROLS *	controls () const
PCB_BASE_EDIT_FRAME *	frame () const
BOARD *	board () const
FOOTPRINT *	footprint () const
PCBNEW_SETTINGS::DISPLAY_OPTIONS &	displayOptions () const
PCB_DRAW_PANEL_GAL *	canvas () const
const PCB_SELECTION &	selection () const
PCB_SELECTION &	selection ()
void	attachManager (TOOL_MANAGER *aManager)
	Set the TOOL_MANAGER the tool will belong to.
KIGFX::VIEW *	getView () const
	Returns the instance of #VIEW object used in the application.
KIGFX::VIEW_CONTROLS *	getViewControls () const
	Return the instance of VIEW_CONTROLS object used in the application.
template<typename T >
T *	getEditFrame () const
	Return the application window object, casted to requested user type.
template<typename T >
T *	getModel () const
	Return the model object if it matches the requested type.

Protected Attributes
bool	m_isFootprintEditor
bool	m_isBoardEditor
TOOL_MENU	m_menu
	The functions below are not yet implemented - their interface may change.
TOOL_TYPE	m_type
	Unique identifier for the tool, assigned by a TOOL_MANAGER instance.
TOOL_ID	m_toolId
	Name of the tool.
std::string	m_toolName
TOOL_MANAGER *	m_toolMgr

Private Member Functions
void	setTransitions () override
	< Set up handlers for various events.
void	resetTransitions ()
	Clear the current transition map and restores the default one created by setTransitions().
void	goInternal (TOOL_STATE_FUNC &aState, const TOOL_EVENT_LIST &aConditions)
EDA_ITEM *	getModelInt () const
TOOLS_HOLDER *	getToolHolderInt () const

Private Attributes
FOOTPRINT_EDIT_FRAME *	m_frame
DIALOG_FOOTPRINT_CHECKER *	m_checkerDialog
std::unique_ptr< FOOTPRINT >	m_copiedFootprint

Detailed Description

Module editor specific tools.

Definition at line 39 of file footprint_editor_control.h.

Member Enumeration Documentation

INTERACTIVE_PLACEMENT_OPTIONS

enum PCB_TOOL_BASE::INTERACTIVE_PLACEMENT_OPTIONS

protectedinherited

Options for placing items interactively.

Enumerator
IPO_ROTATE	Handle the rotate action in the loop by calling the item's rotate method.
IPO_FLIP	Handle flip action in the loop by calling the item's flip method.
IPO_SINGLE_CLICK	Create an item immediately on placement starting, otherwise show the pencil cursor until the item is created.
IPO_REPEAT	Allow repeat placement of the item.

Definition at line 121 of file pcb_tool_base.h.

RESET_REASON

enum TOOL_BASE::RESET_REASON

inherited

Determine the reason of reset for a tool.

Enumerator
RUN	Tool is invoked after being inactive.
MODEL_RELOAD	Model changes (the sheet for a schematic)
SUPERMODEL_RELOAD	For schematics, the entire schematic changed, not just the sheet.
GAL_SWITCH	Rendering engine changes.
REDRAW	Full drawing refresh.

Definition at line 77 of file tool_base.h.

Constructor & Destructor Documentation

FOOTPRINT_EDITOR_CONTROL()

FOOTPRINT_EDITOR_CONTROL::FOOTPRINT_EDITOR_CONTROL

(

)

Definition at line 53 of file footprint_editor_control.cpp.

~FOOTPRINT_EDITOR_CONTROL()

FOOTPRINT_EDITOR_CONTROL::~FOOTPRINT_EDITOR_CONTROL ( )

override

Definition at line 61 of file footprint_editor_control.cpp.

Member Function Documentation

Activate()

void TOOL_INTERACTIVE::Activate ( )

inherited

Run the tool.

After activation, the tool starts receiving events until it is finished.

Definition at line 55 of file tool_interactive.cpp.

References TOOL_MANAGER::InvokeTool(), TOOL_BASE::m_toolId, and TOOL_BASE::m_toolMgr.

Referenced by AUTOPLACE_TOOL::autoplace(), EDIT_TOOL::copyToClipboard(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), SYMBOL_EDITOR_DRAWING_TOOLS::doDrawShape(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), SYMBOL_EDITOR_MOVE_TOOL::doMoveSelection(), SCH_MOVE_TOOL::doMoveSelection(), EDIT_TOOL::DragArcTrack(), DRAWING_TOOL::DrawArc(), DRAWING_TOOL::DrawCircle(), DRAWING_TOOL::DrawDimension(), DRAWING_TOOL::DrawLine(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::DrawRectangle(), SCH_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), SCH_DRAWING_TOOLS::DrawTable(), DRAWING_TOOL::DrawTable(), DRAWING_TOOL::DrawZone(), BOARD_EDITOR_CONTROL::DrillOrigin(), PAD_TOOL::EditPad(), PAD_TOOL::EnumeratePads(), PCB_CONTROL::GridPlaceOrigin(), SCH_EDITOR_CONTROL::HighlightNetCursor(), SCH_DRAWING_TOOLS::ImportGraphics(), SYMBOL_EDITOR_DRAWING_TOOLS::ImportGraphics(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), SCH_EDIT_TOOL::InteractiveDelete(), SYMBOL_EDITOR_EDIT_TOOL::InteractiveDelete(), PL_EDIT_TOOL::InteractiveDelete(), PCB_CONTROL::InteractiveDelete(), DRAWING_TOOL::InteractivePlaceWithPreview(), BOARD_INSPECTION_TOOL::LocalRatsnestTool(), EE_POINT_EDITOR::Main(), PICKER_TOOL::Main(), PL_EDIT_TOOL::Main(), PL_POINT_EDITOR::Main(), PCB_PICKER_TOOL::Main(), ROUTER_TOOL::MainLoop(), GERBVIEW_INSPECTION_TOOL::MeasureTool(), PCB_VIEWER_TOOLS::MeasureTool(), PCB_POINT_EDITOR::OnSelectionChange(), GROUP_TOOL::PickNewMember(), SYMBOL_EDITOR_DRAWING_TOOLS::PlaceAnchor(), BOARD_EDITOR_CONTROL::PlaceFootprint(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), DRAWING_TOOL::PlaceReferenceImage(), SCH_DRAWING_TOOLS::PlaceSymbol(), DRAWING_TOOL::PlaceText(), DRAWING_TOOL::PlaceTuningPattern(), EDIT_TOOL::Remove(), ROUTER_TOOL::RouteSelected(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), DRAWING_TOOL::SetAnchor(), DRC_TOOL::ShowDRCDialog(), SCH_EDITOR_CONTROL::SimProbe(), SCH_EDITOR_CONTROL::SimTune(), SCH_DRAWING_TOOLS::SingleClickPlace(), SCH_DRAWING_TOOLS::TwoClickPlace(), SYMBOL_EDITOR_DRAWING_TOOLS::TwoClickPlace(), and SCH_LINE_WIRE_BUS_TOOL::UnfoldBus().

attachManager()

void TOOL_BASE::attachManager ( TOOL_MANAGER *  aManager )

protectedinherited

Set the TOOL_MANAGER the tool will belong to.

Called by TOOL_MANAGER::RegisterTool()

Definition at line 60 of file tool_base.cpp.

References TOOL_BASE::m_toolMgr.

Referenced by TOOL_MANAGER::RegisterTool().

board()

BOARD * PCB_TOOL_BASE::board ( ) const

inlineprotectedinherited

Definition at line 170 of file pcb_tool_base.h.

Referenced by PCB_CONTROL::AppendBoard(), BOARD_EDITOR_CONTROL::AssignNetclass(), AUTOPLACE_TOOL::autoplace(), BOARD_INSPECTION_TOOL::calculateSelectionRatsnest(), EDIT_TOOL::ChangeTrackWidth(), ZONE_FILLER_TOOL::CheckAllZones(), BOARD_INSPECTION_TOOL::ClearHighlight(), CreateFootprint(), MICROWAVE_TOOL::createInductorBetween(), ROUTER_TOOL::CustomTrackWidthDialog(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), EDIT_TOOL::DragArcTrack(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), DRAWING_TOOL::drawShape(), PAD_TOOL::EnumeratePads(), PAD_TOOL::explodePad(), BOARD_EDITOR_CONTROL::ExportNetlist(), ZONE_FILLER_TOOL::FillAllZones(), EDIT_TOOL::FilletTracks(), PCB_TOOL_BASE::footprint(), GENERATOR_TOOL::GenEditAction(), GENERATOR_TOOL::GENERATOR_TOOL(), GROUP_TOOL::Group(), ROUTER_TOOL::handleLayerSwitch(), BOARD_INSPECTION_TOOL::highlightNet(), ROUTER_TOOL::Init(), ROUTER_TOOL::InlineDrag(), PCB_CONTROL::InteractiveDelete(), DRAWING_TOOL::InteractivePlaceWithPreview(), PCB_CONTROL::LayerNext(), PCB_CONTROL::LayerPrev(), BOARD_INSPECTION_TOOL::LocalRatsnestTool(), EDIT_TOOL::MoveExact(), NewFootprint(), PAD_TOOL::OnUndoRedo(), PCB_CONTROL::Paste(), PCB_CONTROL::placeBoardItems(), BOARD_EDITOR_CONTROL::PlaceFootprint(), PAD_TOOL::PlacePad(), DRAWING_TOOL::PlaceText(), DRAWING_TOOL::PlaceTuningPattern(), PCB_CONTROL::pruneItemLayers(), EDIT_TOOL::rebuildConnectivity(), ZONE_FILLER_TOOL::rebuildConnectivity(), PAD_TOOL::RecombinePad(), GENERATOR_TOOL::RegenerateAllOfType(), GENERATOR_TOOL::RegenerateItem(), GENERATOR_TOOL::RegenerateSelected(), BOARD_EDITOR_CONTROL::RepairBoard(), RepairFootprint(), PNS::TOOL_BASE::Reset(), GENERATOR_TOOL_PNS_PROXY::Reset(), PAD_TOOL::Reset(), PCB_CONTROL::Reset(), PCB_CONTROL::TrackDisplayMode(), PCB_CONTROL::unfilledZoneCheck(), ROUTER_TOOL::UpdateMessagePanel(), ROUTER_TOOL::updateSizesAfterLayerSwitch(), PCB_CONTROL::ViaDisplayMode(), PCB_CONTROL::ZoneDisplayMode(), ZONE_FILLER_TOOL::ZoneFill(), ZONE_FILLER_TOOL::ZoneFillDirty(), BOARD_EDITOR_CONTROL::ZoneMerge(), GLOBAL_EDIT_TOOL::ZonesManager(), and ZONE_FILLER_TOOL::ZoneUnfillAll().

canvas()

PCB_DRAW_PANEL_GAL * PCB_TOOL_BASE::canvas ( ) const

protectedinherited

Definition at line 307 of file pcb_tool_base.cpp.

References PCB_TOOL_BASE::frame(), and PCB_BASE_FRAME::GetCanvas().

Referenced by BOARD_EDITOR_CONTROL::AssignNetclass(), CreateFootprint(), EDIT_TOOL::DeleteItems(), EDIT_TOOL::doMoveSelection(), PAD_TOOL::enterPadEditMode(), PAD_TOOL::EnumeratePads(), PAD_TOOL::ExitPadEditMode(), ZONE_FILLER_TOOL::FillAllZones(), EDIT_TOOL::Init(), NewFootprint(), EDIT_TOOL::pickReferencePoint(), PCB_CONTROL::RatsnestModeCycle(), EDIT_TOOL::rebuildConnectivity(), ZONE_FILLER_TOOL::rebuildConnectivity(), ZONE_FILLER_TOOL::refresh(), POSITION_RELATIVE_TOOL::RelativeItemSelectionMove(), EDIT_TOOL::Remove(), Save(), SaveAs(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), ZONE_FILLER_TOOL::singleShotRefocus(), PCB_CONTROL::ToggleRatsnest(), PCB_CONTROL::TrackDisplayMode(), PCB_CONTROL::ViaDisplayMode(), PCB_CONTROL::ZoneDisplayMode(), and ZONE_FILLER_TOOL::ZoneFillDirty().

CheckFootprint()

int FOOTPRINT_EDITOR_CONTROL::CheckFootprint

(

const TOOL_EVENT &

aEvent

)

Definition at line 714 of file footprint_editor_control.cpp.

References m_checkerDialog, m_frame, and DIALOG_SHIM::Show().

Referenced by setTransitions().

CleanupGraphics()

int FOOTPRINT_EDITOR_CONTROL::CleanupGraphics

(

const TOOL_EVENT &

aEvent

)

Definition at line 704 of file footprint_editor_control.cpp.

Referenced by setTransitions().

controls()

KIGFX::VIEW_CONTROLS * PCB_TOOL_BASE::controls ( ) const

inlineprotectedinherited

Definition at line 160 of file pcb_tool_base.h.

References TOOL_BASE::getViewControls().

Referenced by PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), EDIT_TOOL::DragArcTrack(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::DrawZone(), ROUTER_TOOL::finishInteractive(), ROUTER_TOOL::handleLayerSwitch(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), PCB_PICKER_TOOL::Main(), ROUTER_TOOL::MainLoop(), ROUTER_TOOL::performRouting(), BOARD_EDITOR_CONTROL::PlaceFootprint(), DRAWING_TOOL::PlaceTuningPattern(), ROUTER_TOOL::prepareInteractive(), ROUTER_TOOL::RouteSelected(), PCB_PICKER_TOOL::setControls(), PCB_POINT_EDITOR::setEditedPoint(), PNS::TOOL_BASE::updateEndItem(), and PNS::TOOL_BASE::updateStartItem().

CreateFootprint()

int FOOTPRINT_EDITOR_CONTROL::CreateFootprint

(

const TOOL_EVENT &

aEvent

)

Definition at line 212 of file footprint_editor_control.cpp.

References _, FOOTPRINT_EDIT_FRAME::AddFootprintToBoard(), PCB_TOOL_BASE::board(), BOARD::BuildListOfNets(), PCB_TOOL_BASE::canvas(), FOOTPRINT_EDIT_FRAME::Clear_Pcb(), EDA_ITEM::ClearFlags(), FOOTPRINT_EDIT_FRAME::ClearModify(), UTF8::empty(), PCB_TOOL_BASE::footprint(), FRAME_FOOTPRINT_WIZARD, FOOTPRINT::GetFPID(), LIB_ID::GetLibNickname(), PCB_BASE_FRAME::GetScreen(), FOOTPRINT_EDIT_FRAME::GetTreeFPID(), EDA_DRAW_PANEL_GAL::GetViewControls(), HandleUnsavedChanges(), FOOTPRINT_EDIT_FRAME::IsContentModified(), KIWAY_HOLDER::Kiway(), m_frame, FOOTPRINT_EDIT_FRAME::OnModify(), KIWAY::Player(), EDA_DRAW_PANEL_GAL::Refresh(), FOOTPRINT_EDIT_FRAME::SaveFootprint(), BASE_SCREEN::SetContentModified(), KIGFX::VIEW_CONTROLS::SetCrossHairCursorPosition(), FOOTPRINT::SetFPID(), LIB_ID::SetLibNickname(), FOOTPRINT::SetPosition(), FOOTPRINT_EDIT_FRAME::SyncLibraryTree(), PCB_BASE_FRAME::Update3DView(), FOOTPRINT_EDIT_FRAME::UpdateView(), and EDA_DRAW_FRAME::Zoom_Automatique().

Referenced by setTransitions().

CrossProbe()

void FOOTPRINT_EDITOR_CONTROL::CrossProbe

(

const PCB_MARKER *

aMarker

)

Definition at line 730 of file footprint_editor_control.cpp.

References m_checkerDialog, m_frame, DIALOG_FOOTPRINT_CHECKER::SelectMarker(), and DIALOG_SHIM::Show().

CutCopyFootprint()

int FOOTPRINT_EDITOR_CONTROL::CutCopyFootprint

(

const TOOL_EVENT &

aEvent

)

Definition at line 353 of file footprint_editor_control.cpp.

References PCB_ACTIONS::cutFootprint, DeleteFootprint(), PCB_BASE_FRAME::GetBoard(), BOARD::GetFirstFootprint(), FOOTPRINT_EDIT_FRAME::GetLoadedFPID(), FOOTPRINT_EDIT_FRAME::GetTreeFPID(), TOOL_EVENT::IsAction(), PCB_BASE_FRAME::LoadFootprint(), m_copiedFootprint, and m_frame.

Referenced by setTransitions().

DefaultPadProperties()

int FOOTPRINT_EDITOR_CONTROL::DefaultPadProperties

(

const TOOL_EVENT &

aEvent

)

Edit the properties used for new pad creation.

Definition at line 697 of file footprint_editor_control.cpp.

Referenced by setTransitions().

DeleteFootprint()

int FOOTPRINT_EDITOR_CONTROL::DeleteFootprint

(

const TOOL_EVENT &

aEvent

)

Definition at line 535 of file footprint_editor_control.cpp.

References PCB_TOOL_BASE::frame().

Referenced by CutCopyFootprint(), and setTransitions().

DestroyCheckerDialog()

void FOOTPRINT_EDITOR_CONTROL::DestroyCheckerDialog

(

)

Definition at line 742 of file footprint_editor_control.cpp.

References m_checkerDialog.

Referenced by DIALOG_FOOTPRINT_CHECKER::OnCancelClick(), and Reset().

displayOptions()

PCBNEW_SETTINGS::DISPLAY_OPTIONS & PCB_TOOL_BASE::displayOptions ( ) const

protectedinherited

Definition at line 302 of file pcb_tool_base.cpp.

References PCB_TOOL_BASE::frame(), PCB_BASE_FRAME::GetPcbNewSettings(), and PCBNEW_SETTINGS::m_Display.

Referenced by BOARD_INSPECTION_TOOL::calculateSelectionRatsnest(), ROUTER_TOOL::InlineDrag(), BOARD_INSPECTION_TOOL::LocalRatsnestTool(), PCB_CONTROL::RatsnestModeCycle(), PCB_CONTROL::ToggleRatsnest(), PCB_CONTROL::TrackDisplayMode(), and PCB_CONTROL::ViaDisplayMode().

doInteractiveItemPlacement()

void PCB_TOOL_BASE::doInteractiveItemPlacement ( const TOOL_EVENT &  aTool, INTERACTIVE_PLACER_BASE *  aPlacer, const wxString &  aCommitMessage, int  aOptions = IPO_ROTATE | IPO_FLIP | IPO_REPEAT  )

protectedinherited

Helper function for performing a common interactive idiom: wait for a left click, place an item there (perhaps with a dialog or other user interaction), then have it move with the mouse and respond to rotate/flip, etc.

More complex interactive processes are not supported here, you should implement a customised event loop for those.

Parameters

aItemCreator	the callable that will attempt to create the item
aCommitMessage	the message used on a successful commit

Definition at line 42 of file pcb_tool_base.cpp.

References TOOL_INTERACTIVE::Activate(), SELECTION::Add(), KIGFX::VIEW_GROUP::Add(), KIGFX::PCB_VIEW::Add(), PCB_TOOL_BASE::board(), BUT_LEFT, BUT_RIGHT, KIGFX::VIEW_CONTROLS::CaptureCursor(), SELECTION::Clear(), EDA_ITEM::ClearFlags(), PCB_TOOL_BASE::controls(), INTERACTIVE_PLACER_BASE::CreateItem(), PCB_ACTIONS::flip, KIGFX::VIEW_CONTROLS::ForceCursorPosition(), PCB_TOOL_BASE::frame(), PCB_BASE_FRAME::GetCanvas(), TOOL_EVT_UTILS::GetEventRotationAngle(), EDA_ITEM::GetFlags(), TOOL_BASE::GetManager(), PCB_BASE_FRAME::GetModel(), TOOL_BASE::getView(), grid, PCB_TOOL_BASE::IPO_FLIP, PCB_TOOL_BASE::IPO_REPEAT, PCB_TOOL_BASE::IPO_ROTATE, PCB_TOOL_BASE::IPO_SINGLE_CLICK, TOOL_EVT_UTILS::IsRotateToolEvt(), INTERACTIVE_PLACER_BASE::m_board, INTERACTIVE_PLACER_BASE::m_frame, TOOL_INTERACTIVE::m_menu, INTERACTIVE_PLACER_BASE::m_modifiers, TOOL_BASE::m_toolMgr, PCB_BASE_EDIT_FRAME::OnEditItemRequest(), INTERACTIVE_PLACER_BASE::PlaceItem(), TOOLS_HOLDER::PopTool(), TOOL_MANAGER::PostAction(), TOOL_MANAGER::ProcessEvent(), PCB_ACTIONS::properties, BOARD_COMMIT::Push(), TOOLS_HOLDER::PushTool(), ACTIONS::refreshPreview, KIGFX::PCB_VIEW::Remove(), TOOL_MANAGER::RunAction(), EVENTS::SelectedItemsModified, PCB_TOOL_BASE::selection(), PCB_ACTIONS::selectionClear, KIGFX::VIEW_CONTROLS::SetAutoPan(), EDA_DRAW_PANEL_GAL::SetCurrentCursor(), EDA_ITEM::SetFlags(), TOOL_MENU::ShowContextMenu(), KIGFX::VIEW_CONTROLS::ShowCursor(), INTERACTIVE_PLACER_BASE::SnapItem(), TC_COMMAND, PCB_ACTIONS::trackViaSizeChanged, KIGFX::PCB_VIEW::Update(), PCB_TOOL_BASE::view(), and TOOL_INTERACTIVE::Wait().

Referenced by MICROWAVE_TOOL::addMicrowaveFootprint(), DRAWING_TOOL::DrawVia(), and PAD_TOOL::PlacePad().

DuplicateFootprint()

int FOOTPRINT_EDITOR_CONTROL::DuplicateFootprint

(

const TOOL_EVENT &

aEvent

)

Definition at line 397 of file footprint_editor_control.cpp.

References FOOTPRINT_EDIT_FRAME::DuplicateFootprint(), FOOTPRINT_EDIT_FRAME::FocusOnLibID(), PCB_TOOL_BASE::footprint(), PCB_BASE_FRAME::GetBoard(), BOARD::GetFirstFootprint(), FOOTPRINT::GetFPID(), FOOTPRINT_EDIT_FRAME::GetLoadedFPID(), FOOTPRINT_EDIT_FRAME::GetTargetFPID(), FOOTPRINT_EDIT_FRAME::GetTreeFPID(), PCB_BASE_FRAME::LoadFootprint(), FOOTPRINT_EDIT_FRAME::LoadFootprintFromLibrary(), m_frame, FOOTPRINT_EDIT_FRAME::RefreshLibraryTree(), and FOOTPRINT_EDIT_FRAME::SyncLibraryTree().

Referenced by setTransitions().

EditFootprint()

int FOOTPRINT_EDITOR_CONTROL::EditFootprint

(

const TOOL_EVENT &

aEvent

)

Definition at line 625 of file footprint_editor_control.cpp.

References FOOTPRINT_EDIT_FRAME::GetTreeFPID(), FOOTPRINT_EDIT_FRAME::LoadFootprintFromLibrary(), and m_frame.

Referenced by setTransitions().

EditTextAndGraphics()

int FOOTPRINT_EDITOR_CONTROL::EditTextAndGraphics

(

const TOOL_EVENT &

aEvent

)

Definition at line 602 of file pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp.

Referenced by setTransitions().

ExportFootprint()

int FOOTPRINT_EDITOR_CONTROL::ExportFootprint

(

const TOOL_EVENT &

aEvent

)

Definition at line 579 of file footprint_editor_control.cpp.

References FOOTPRINT_EDIT_FRAME::ExportFootprint(), PCB_BASE_FRAME::GetBoard(), BOARD::GetFirstFootprint(), and m_frame.

Referenced by setTransitions().

footprint()

FOOTPRINT * PCB_TOOL_BASE::footprint ( ) const

inlineprotectedinherited

Definition at line 172 of file pcb_tool_base.h.

References PCB_TOOL_BASE::board(), and BOARD::GetFirstFootprint().

Referenced by PCB_CONTROL::AppendBoard(), MICROWAVE_TOOL::createBaseFootprint(), CreateFootprint(), MICROWAVE_TOOL::createFootprint(), MICROWAVE_TOOL::createMicrowaveInductor(), EDIT_TOOL::doMoveSelection(), DRAWING_TOOL::DrawSpecificationStackup(), DuplicateFootprint(), GLOBAL_EDIT_TOOL::ExchangeFootprints(), BOARD_EDITOR_CONTROL::ExportNetlist(), ROUTER_TOOL::InlineDrag(), BOARD_INSPECTION_TOOL::InspectClearance(), BOARD_INSPECTION_TOOL::InspectDRCError(), BOARD_INSPECTION_TOOL::makeDRCEngine(), PCB_CONTROL::Paste(), PCB_CONTROL::placeBoardItems(), Properties(), PAD_TOOL::pushPadSettings(), PAD_TOOL::RecombinePad(), RenameFootprint(), BOARD_EDITOR_CONTROL::RepairBoard(), RepairFootprint(), Save(), SaveAs(), and DRAWING_TOOL::SetAnchor().

frame()

PCB_BASE_EDIT_FRAME * PCB_TOOL_BASE::frame ( ) const

inlineprotectedinherited

Definition at line 165 of file pcb_tool_base.h.

Referenced by PCB_POINT_EDITOR::addCorner(), AUTOPLACE_TOOL::autoplace(), PCB_TOOL_BASE::canvas(), ZONE_FILLER_TOOL::CheckAllZones(), PNS::TOOL_BASE::checkSnap(), PCB_CONTROL::ContrastModeFeedback(), PAD_TOOL::copyPadSettings(), EDIT_TOOL::copyToClipboard(), ROUTER_TOOL::CustomTrackWidthDialog(), DeleteFootprint(), EDIT_TOOL::DeleteItems(), PCB_TOOL_BASE::displayOptions(), BOARD_EDITOR_CONTROL::doCrossProbePcbToSch(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), ROUTER_TOOL::DpDimensionsDialog(), EDIT_TOOL::DragArcTrack(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawShape(), DRAWING_TOOL::DrawTable(), DRAWING_TOOL::DrawVia(), DRAWING_TOOL::DrawZone(), PAD_TOOL::EditPad(), PCB_EDIT_TABLE_TOOL::EditTable(), PAD_TOOL::enterPadEditMode(), PAD_TOOL::EnumeratePads(), PAD_TOOL::ExitPadEditMode(), BOARD_EDITOR_CONTROL::ExportSpecctraDSN(), ZONE_FILLER_TOOL::FillAllZones(), EDIT_TOOL::FilletTracks(), ROUTER_TOOL::finishInteractive(), EDIT_TOOL::Flip(), PCB_CONTROL::FlipPcbView(), GLOBAL_EDIT_TOOL::GlobalDeletions(), ROUTER_TOOL::handleLayerSwitch(), PCB_CONTROL::HighContrastMode(), PCB_CONTROL::HighContrastModeCycle(), BOARD_INSPECTION_TOOL::HighlightItem(), ImportFootprint(), BOARD_EDITOR_CONTROL::ImportSpecctraSession(), SCRIPTING_TOOL::Init(), ROUTER_TOOL::Init(), EDIT_TOOL::Init(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), DRAWING_TOOL::InteractivePlaceWithPreview(), PCB_TOOL_BASE::Is45Limited(), PCB_PICKER_TOOL::Main(), ROUTER_TOOL::MainLoop(), EDIT_TOOL::MoveExact(), PCB_POINT_EDITOR::movePoint(), PCB_CONTROL::NetColorModeCycle(), PCB_POINT_EDITOR::OnSelectionChange(), ROUTER_TOOL::onViaCommand(), PCB_CONTROL::Paste(), PAD_TOOL::pastePadProperties(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), GROUP_TOOL::PickNewMember(), PNS::TOOL_BASE::pickSingleItem(), BOARD_EDITOR_CONTROL::PlaceFootprint(), DRAWING_TOOL::PlaceText(), ROUTER_TOOL::prepareInteractive(), EDIT_TOOL::Properties(), PCB_CONTROL::pruneItemLayers(), PAD_TOOL::pushPadSettings(), PCB_CONTROL::RatsnestModeCycle(), GENERATOR_TOOL::RegenerateAllOfType(), GENERATOR_TOOL::RegenerateItem(), GENERATOR_TOOL::RegenerateSelected(), POSITION_RELATIVE_TOOL::RelativeItemSelectionMove(), SCRIPTING_TOOL::reloadPlugins(), PCB_POINT_EDITOR::removeCorner(), PNS::TOOL_BASE::Reset(), GENERATOR_TOOL_PNS_PROXY::Reset(), PAD_TOOL::Reset(), EDIT_TOOL::Rotate(), ROUTER_TOOL::RouteSelected(), ROUTER_TOOL::saveRouterDebugLog(), ROUTER_TOOL::SelectCopperLayerPair(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), PCB_POINT_EDITOR::setEditedPoint(), ROUTER_TOOL::SettingsDialog(), GENERATOR_TOOL::ShowGeneratorsManager(), GLOBAL_EDIT_TOOL::swapBoardItem(), GLOBAL_EDIT_TOOL::SwapLayers(), ROUTER_TOOL::switchLayerOnViaPlacement(), DRAWING_TOOL::ToggleHV45Mode(), PCB_CONTROL::ToggleRatsnest(), PCB_CONTROL::unfilledZoneCheck(), PCB_POINT_EDITOR::updateItem(), ROUTER_TOOL::UpdateMessagePanel(), EDIT_TOOL::updateModificationPoint(), BOARD_EDITOR_CONTROL::UpdateSchematicFromPCB(), PCB_CONTROL::ZoneDisplayMode(), ZONE_FILLER_TOOL::ZoneFill(), ZONE_FILLER_TOOL::ZoneFillAll(), and ZONE_FILLER_TOOL::ZoneFillDirty().

getEditFrame()

template<typename T >

T * TOOL_BASE::getEditFrame ( ) const

inlineprotectedinherited

Return the application window object, casted to requested user type.

Definition at line 186 of file tool_base.h.

References TOOL_BASE::getToolHolderInt().

Referenced by ZONE_CREATE_HELPER::createNewZone(), and ZONE_CREATE_HELPER::setUniquePriority().

GetId()

TOOL_ID TOOL_BASE::GetId ( ) const

inlineinherited

Return the unique identifier of the tool.

The identifier is set by an instance of TOOL_MANAGER.

Returns

Identifier of the tool.

Definition at line 122 of file tool_base.h.

References TOOL_BASE::m_toolId.

Referenced by TOOL_MANAGER::finishTool(), TOOL_MANAGER::InitTools(), TOOL_MANAGER::isActive(), TOOL_MANAGER::RegisterTool(), ACTION_MANAGER::RunHotKey(), TOOL_MANAGER::runTool(), TOOL_MANAGER::saveViewControls(), and TOOL_MANAGER::ShutdownTool().

GetManager()

TOOL_MANAGER * TOOL_BASE::GetManager ( ) const

inlineinherited

Return the instance of TOOL_MANAGER that takes care of the tool.

Returns

Instance of the TOOL_MANAGER or NULL if there is no associated tool manager.

Definition at line 145 of file tool_base.h.

References TOOL_BASE::m_toolMgr.

Referenced by ZONE_CREATE_HELPER::commitZone(), ZONE_CREATE_HELPER::createNewZone(), PNS_KICAD_IFACE::DisplayItem(), PCB_TOOL_BASE::doInteractiveItemPlacement(), PCB_TUNING_PATTERN::EditPush(), PCB_TUNING_PATTERN::EditRevert(), PCB_TUNING_PATTERN::EditStart(), ACTION_MENU::getToolManager(), PNS_KICAD_IFACE::GetUnits(), makeShapeModificationMenu(), ZONE_CREATE_HELPER::OnFirstPoint(), ZONE_CREATE_HELPER::performZoneCutout(), SCH_COMMIT::SCH_COMMIT(), PCB_TUNING_PATTERN::Update(), and GLOBAL_EDIT_TOOL::ZonesManager().

getModel()

template<typename T >

T * TOOL_BASE::getModel ( ) const

inlineprotectedinherited

Return the model object if it matches the requested type.

Store the type of the tool.

Definition at line 198 of file tool_base.h.

References TOOL_BASE::getModelInt().

Referenced by ZONE_CREATE_HELPER::commitZone(), and ZONE_CREATE_HELPER::createZoneFromExisting().

getModelInt()

EDA_ITEM * TOOL_BASE::getModelInt ( ) const

privateinherited

Definition at line 54 of file tool_base.cpp.

References TOOL_MANAGER::GetModel(), and TOOL_BASE::m_toolMgr.

Referenced by TOOL_BASE::getModel().

GetName()

const std::string & TOOL_BASE::GetName ( ) const

inlineinherited

Return the name of the tool.

Tool names are expected to obey the format: application.ToolName (eg. pcbnew.InteractiveSelection).

Returns

The name of the tool.

Definition at line 135 of file tool_base.h.

References TOOL_BASE::m_toolName.

Referenced by TOOL_MANAGER::dispatchInternal(), TOOL_INTERACTIVE::goInternal(), COMMON_TOOLS::GridProperties(), TOOL_MANAGER::InitTools(), TOOL_MANAGER::invokeTool(), TOOL_MANAGER::RegisterTool(), TOOL_MANAGER::ResetTools(), TOOL_MANAGER::runTool(), and TOOL_MANAGER::ShutdownTool().

getToolHolderInt()

TOOLS_HOLDER * TOOL_BASE::getToolHolderInt ( ) const

privateinherited

Definition at line 48 of file tool_base.cpp.

References TOOL_MANAGER::GetToolHolder(), and TOOL_BASE::m_toolMgr.

Referenced by TOOL_BASE::getEditFrame().

GetToolMenu()

TOOL_MENU & TOOL_INTERACTIVE::GetToolMenu ( )

inlineinherited

Definition at line 77 of file tool_interactive.h.

References TOOL_INTERACTIVE::m_menu.

Referenced by EE_INSPECTION_TOOL::Init(), EE_POINT_EDITOR::Init(), SCH_EDIT_TABLE_TOOL::Init(), SCH_EDIT_TOOL::Init(), SCH_LINE_WIRE_BUS_TOOL::Init(), SCH_MOVE_TOOL::Init(), SYMBOL_EDITOR_EDIT_TOOL::Init(), SYMBOL_EDITOR_MOVE_TOOL::Init(), SYMBOL_EDITOR_PIN_TOOL::Init(), PL_EDIT_TOOL::Init(), BOARD_EDITOR_CONTROL::Init(), BOARD_INSPECTION_TOOL::Init(), CONVERT_TOOL::Init(), EDIT_TOOL::Init(), GENERATOR_TOOL::Init(), GROUP_TOOL::Init(), PAD_TOOL::Init(), PCB_EDIT_TABLE_TOOL::Init(), PCB_POINT_EDITOR::Init(), and ALIGN_DISTRIBUTE_TOOL::Init().

GetType()

TOOL_TYPE TOOL_BASE::GetType ( ) const

inlineinherited

Return the type of the tool.

Returns

The type of the tool.

Definition at line 110 of file tool_base.h.

References TOOL_BASE::m_type.

Referenced by TOOL_MANAGER::InvokeTool(), TOOL_MANAGER::ResetTools(), TOOL_MANAGER::runTool(), and TOOL_MANAGER::ShutdownTool().

getView()

KIGFX::VIEW * TOOL_BASE::getView ( ) const

protectedinherited

Returns the instance of #VIEW object used in the application.

It allows tools to draw.

Returns

The instance of VIEW.

Definition at line 36 of file tool_base.cpp.

References TOOL_MANAGER::GetView(), and TOOL_BASE::m_toolMgr.

Referenced by EE_POINT_EDITOR::addCornerCondition(), ALIGN_DISTRIBUTE_TOOL::AlignLeft(), ALIGN_DISTRIBUTE_TOOL::AlignRight(), COMMON_TOOLS::CenterContents(), EE_INSPECTION_TOOL::CheckSymbol(), GERBVIEW_CONTROL::ClearAllLayers(), PL_SELECTION_TOOL::ClearSelection(), EE_SELECTION_TOOL::ClearSelection(), EE_SELECTION_TOOL::CollectHits(), SCH_LINE_WIRE_BUS_TOOL::computeBreakPoint(), COMMON_TOOLS::CursorControl(), EDIT_TOOL::DeleteItems(), PL_EDIT_TOOL::DoDelete(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), SYMBOL_EDITOR_DRAWING_TOOLS::doDrawShape(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), SYMBOL_EDITOR_MOVE_TOOL::doMoveSelection(), SCH_MOVE_TOOL::doMoveSelection(), SELECTION_TOOL::doSelectionMenu(), COMMON_TOOLS::doZoomFit(), COMMON_TOOLS::doZoomInOut(), COMMON_TOOLS::doZoomToPreset(), EDIT_TOOL::DragArcTrack(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), SCH_LINE_WIRE_BUS_TOOL::DrawSegments(), SCH_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), DRAWING_TOOL::drawShape(), SCH_DRAWING_TOOLS::DrawSheet(), SCH_DRAWING_TOOLS::DrawTable(), DRAWING_TOOL::DrawTable(), DRAWING_TOOL::DrawZone(), BOARD_EDITOR_CONTROL::DrillOrigin(), SYMBOL_EDITOR_EDIT_TOOL::Duplicate(), PAD_TOOL::EnumeratePads(), PCB_SELECTION_TOOL::FilterCollectorForFootprints(), EE_SELECTION_TOOL::GetNode(), ROUTER_TOOL::getStartLayer(), PCB_CONTROL::GridPlaceOrigin(), PCB_CONTROL::GridResetOrigin(), EE_SELECTION_TOOL::GuessSelectionCandidates(), PCB_SELECTION_TOOL::GuessSelectionCandidates(), ROUTER_TOOL::handleCommonEvents(), EE_SELECTION_TOOL::highlight(), PL_SELECTION_TOOL::highlight(), PCB_SELECTION_TOOL::highlight(), GERBVIEW_CONTROL::HighlightControl(), BOARD_INSPECTION_TOOL::highlightNet(), PNS::TOOL_BASE::highlightNets(), PCB_SELECTION_TOOL::hitTestDistance(), SCH_DRAWING_TOOLS::ImportGraphics(), SYMBOL_EDITOR_DRAWING_TOOLS::ImportGraphics(), SCH_EDIT_TOOL::Init(), EDIT_TOOL::Init(), ROUTER_TOOL::InlineDrag(), SCH_EDIT_TOOL::InteractiveDelete(), PL_EDIT_TOOL::InteractiveDelete(), PCB_CONTROL::InteractiveDelete(), EE_POINT_EDITOR::Main(), PL_POINT_EDITOR::Main(), PCB_PICKER_TOOL::Main(), GERBVIEW_INSPECTION_TOOL::MeasureTool(), PCB_VIEWER_TOOLS::MeasureTool(), SCH_EDIT_TOOL::Mirror(), EDIT_TOOL::MoveExact(), PL_EDIT_TOOL::moveItem(), COMMON_TOOLS::OnGridChanged(), PCB_POINT_EDITOR::OnSelectionChange(), COMMON_TOOLS::PanControl(), SCH_EDITOR_CONTROL::Paste(), SYMBOL_EDITOR_EDIT_TOOL::Paste(), PL_EDIT_TOOL::Paste(), ROUTER_TOOL::performRouting(), PNS::TOOL_BASE::pickSingleItem(), BOARD_EDITOR_CONTROL::PlaceFootprint(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), DRAWING_TOOL::PlaceReferenceImage(), SCH_DRAWING_TOOLS::PlaceSymbol(), DRAWING_TOOL::PlaceText(), DRAWING_TOOL::PlaceTuningPattern(), ROUTER_TOOL::prepareInteractive(), SCH_EDIT_TOOL::Properties(), EDIT_TOOL::Properties(), PCB_SELECTION_TOOL::pruneObscuredSelectionCandidates(), EE_SELECTION_TOOL::Reset(), EE_TOOL_BASE< T >::Reset(), GERBVIEW_SELECTION_TOOL::Reset(), PNS::TOOL_BASE::Reset(), BOARD_EDITOR_CONTROL::Reset(), DRAWING_TOOL::Reset(), GENERATOR_TOOL_PNS_PROXY::Reset(), PCB_CONTROL::Reset(), PCB_SELECTION_TOOL::Reset(), SCH_EDIT_TOOL::Rotate(), GERBVIEW_SELECTION_TOOL::select(), PCB_SELECTION_TOOL::Selectable(), EE_SELECTION_TOOL::SelectAll(), PCB_SELECTION_TOOL::SelectAll(), EE_SELECTION_TOOL::selectionContains(), PL_SELECTION_TOOL::selectionContains(), PCB_SELECTION_TOOL::selectionContains(), EE_SELECTION_TOOL::selectMultiple(), PL_SELECTION_TOOL::selectMultiple(), PCB_SELECTION_TOOL::selectMultiple(), PL_SELECTION_TOOL::SelectPoint(), EE_SELECTION_TOOL::selectPoint(), ZOOM_TOOL::selectRegion(), GERBVIEW_SELECTION_TOOL::selectVisually(), DRAWING_TOOL::SetAnchor(), SCH_EDITOR_CONTROL::SimProbe(), SCH_EDITOR_CONTROL::SimTune(), SCH_DRAWING_TOOLS::SingleClickPlace(), SCH_EDITOR_CONTROL::ToggleDirectiveLabels(), SCH_EDITOR_CONTROL::ToggleERCErrors(), SCH_EDITOR_CONTROL::ToggleERCExclusions(), SCH_EDITOR_CONTROL::ToggleERCWarnings(), SCH_EDITOR_CONTROL::ToggleHiddenFields(), SYMBOL_EDITOR_CONTROL::ToggleHiddenFields(), SCH_EDITOR_CONTROL::ToggleHiddenPins(), SYMBOL_EDITOR_CONTROL::ToggleHiddenPins(), SCH_EDITOR_CONTROL::ToggleOPCurrents(), SCH_EDITOR_CONTROL::ToggleOPVoltages(), SCH_DRAWING_TOOLS::TwoClickPlace(), SYMBOL_EDITOR_DRAWING_TOOLS::TwoClickPlace(), EE_SELECTION_TOOL::unhighlight(), PL_SELECTION_TOOL::unhighlight(), PCB_SELECTION_TOOL::unhighlight(), PCB_TEST_SELECTION_TOOL::unhighlight(), GERBVIEW_SELECTION_TOOL::unselect(), EE_SELECTION_TOOL::UnselectAll(), PCB_SELECTION_TOOL::UnselectAll(), GERBVIEW_SELECTION_TOOL::unselectVisually(), EE_POINT_EDITOR::updateEditedPoint(), PL_POINT_EDITOR::updateEditedPoint(), PCB_POINT_EDITOR::updateEditedPoint(), SCH_FIND_REPLACE_TOOL::UpdateFind(), PL_POINT_EDITOR::updateItem(), PCB_POINT_EDITOR::updateItem(), EE_TOOL_BASE< T >::updateItem(), SCH_EDITOR_CONTROL::UpdateNetHighlighting(), EE_POINT_EDITOR::updatePoints(), PL_POINT_EDITOR::updatePoints(), PCB_POINT_EDITOR::updatePoints(), PCB_SELECTION_TOOL::updateSelection(), PNS::TOOL_BASE::updateStartItem(), PCB_SELECTION_TOOL::view(), PCB_TOOL_BASE::view(), PCB_VIEWER_TOOLS::view(), PCB_TEST_SELECTION_TOOL::view(), EE_SELECTION_TOOL::ZoomFitCrossProbeBBox(), PCB_SELECTION_TOOL::ZoomFitCrossProbeBBox(), PCB_SELECTION_TOOL::zoomFitSelection(), EE_SELECTION_TOOL::~EE_SELECTION_TOOL(), GERBVIEW_SELECTION_TOOL::~GERBVIEW_SELECTION_TOOL(), and PCB_SELECTION_TOOL::~PCB_SELECTION_TOOL().

getViewControls()

KIGFX::VIEW_CONTROLS * TOOL_BASE::getViewControls ( ) const

protectedinherited

Return the instance of VIEW_CONTROLS object used in the application.

It allows tools to read & modify user input and its settings (eg. show cursor, enable snapping to grid, etc.).

Returns

The instance of VIEW_CONTROLS.

Definition at line 42 of file tool_base.cpp.

References TOOL_MANAGER::GetViewControls(), and TOOL_BASE::m_toolMgr.

Referenced by EE_POINT_EDITOR::addCorner(), PCB_POINT_EDITOR::addCorner(), EE_POINT_EDITOR::addCornerCondition(), EE_SELECTION_TOOL::autostartEvent(), SCH_EDIT_TOOL::BreakWire(), PCB_SELECTION_TOOL::controls(), PCB_TOOL_BASE::controls(), PCB_TEST_SELECTION_TOOL::controls(), COMMON_TOOLS::CursorControl(), EDIT_TOOL::DeleteItems(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), SYMBOL_EDITOR_DRAWING_TOOLS::doDrawShape(), EDIT_TOOL::doMoveSelection(), SYMBOL_EDITOR_MOVE_TOOL::doMoveSelection(), SCH_MOVE_TOOL::doMoveSelection(), SCH_LINE_WIRE_BUS_TOOL::doUnfoldBus(), COMMON_TOOLS::doZoomToPreset(), EDIT_TOOL::DragArcTrack(), DRAWING_TOOL::DrawCircle(), DRAWING_TOOL::DrawLine(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::DrawRectangle(), SCH_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), DRAWING_TOOL::drawShape(), SCH_DRAWING_TOOLS::DrawSheet(), SCH_DRAWING_TOOLS::DrawTable(), DRAWING_TOOL::DrawTable(), DRAWING_TOOL::DrawZone(), SYMBOL_EDITOR_EDIT_TOOL::Duplicate(), PAD_TOOL::EnumeratePads(), SCH_LINE_WIRE_BUS_TOOL::finishSegments(), SCH_EDITOR_CONTROL::HighlightNet(), BOARD_INSPECTION_TOOL::HighlightNet(), ImportFootprint(), SCH_DRAWING_TOOLS::ImportGraphics(), SYMBOL_EDITOR_DRAWING_TOOLS::ImportGraphics(), SCH_EDIT_TOOL::Init(), EDIT_TOOL::Init(), EE_POINT_EDITOR::Main(), EE_SELECTION_TOOL::Main(), PICKER_TOOL::Main(), PL_EDIT_TOOL::Main(), PL_POINT_EDITOR::Main(), PCB_PICKER_TOOL::Main(), ROUTER_TOOL::MainLoop(), GERBVIEW_INSPECTION_TOOL::MeasureTool(), PCB_VIEWER_TOOLS::MeasureTool(), COMMON_TOOLS::OnGridChanged(), PCB_POINT_EDITOR::OnSelectionChange(), SCH_EDITOR_CONTROL::Paste(), SYMBOL_EDITOR_EDIT_TOOL::Paste(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), SYMBOL_EDITOR_DRAWING_TOOLS::PlaceAnchor(), PCB_CONTROL::placeBoardItems(), BOARD_EDITOR_CONTROL::PlaceFootprint(), SCH_DRAWING_TOOLS::PlaceImage(), PL_DRAWING_TOOLS::PlaceItem(), DRAWING_TOOL::PlaceReferenceImage(), SCH_DRAWING_TOOLS::PlaceSymbol(), DRAWING_TOOL::PlaceTuningPattern(), SCH_EDIT_TOOL::Properties(), EDIT_TOOL::Properties(), SCH_EDIT_TOOL::RepeatDrawItem(), PL_SELECTION_TOOL::RequestSelection(), EE_SELECTION_TOOL::RequestSelection(), DRAWING_TOOL::Reset(), PCB_POINT_EDITOR::Reset(), COMMON_TOOLS::ResetLocalCoords(), ROUTER_TOOL::RouteSelected(), PCB_SELECTION_TOOL::selectCursor(), EE_SELECTION_TOOL::selectMultiple(), PL_SELECTION_TOOL::selectMultiple(), PCB_SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::SelectNode(), ZOOM_TOOL::selectRegion(), PCB_SELECTION_TOOL::selectTableCells(), EE_SELECTION_TOOL::selectTableCells(), ALIGN_DISTRIBUTE_TOOL::selectTarget(), PICKER_TOOL::setControls(), PCB_PICKER_TOOL::setControls(), EE_POINT_EDITOR::setEditedPoint(), PL_POINT_EDITOR::setEditedPoint(), PCB_POINT_EDITOR::setEditedPoint(), SCH_DRAWING_TOOLS::SingleClickPlace(), SCH_DRAWING_TOOLS::SyncSheetsPins(), SCH_DRAWING_TOOLS::TwoClickPlace(), SYMBOL_EDITOR_DRAWING_TOOLS::TwoClickPlace(), EE_POINT_EDITOR::updateEditedPoint(), PL_POINT_EDITOR::updateEditedPoint(), PCB_POINT_EDITOR::updateEditedPoint(), PCB_POINT_EDITOR::updateItem(), PL_EDIT_TOOL::updateModificationPoint(), and COMMON_TOOLS::ZoomCenter().

Go()

template<class T >

void TOOL_INTERACTIVE::Go ( int(T::*)(const TOOL_EVENT &)  aStateFunc, const TOOL_EVENT_LIST &  aConditions = TOOL_EVENT( TC_ANY, TA_ANY )  )

inherited

Define which state (aStateFunc) to go when a certain event arrives (aConditions).

No conditions means any event.

Definition at line 147 of file tool_interactive.h.

References TOOL_INTERACTIVE::goInternal().

Referenced by EDA_3D_CONTROLLER::setTransitions(), BITMAP2CMP_CONTROL::setTransitions(), CVPCB_ASSOCIATION_TOOL::setTransitions(), CVPCB_CONTROL::setTransitions(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::setTransitions(), EE_INSPECTION_TOOL::setTransitions(), EE_POINT_EDITOR::setTransitions(), EE_SELECTION_TOOL::setTransitions(), SCH_DRAWING_TOOLS::setTransitions(), SCH_EDIT_TABLE_TOOL::setTransitions(), SCH_EDIT_TOOL::setTransitions(), SCH_EDITOR_CONTROL::setTransitions(), SCH_FIND_REPLACE_TOOL::setTransitions(), SCH_LINE_WIRE_BUS_TOOL::setTransitions(), SCH_MOVE_TOOL::setTransitions(), SCH_NAVIGATE_TOOL::setTransitions(), SIMULATOR_CONTROL::setTransitions(), SYMBOL_EDITOR_CONTROL::setTransitions(), SYMBOL_EDITOR_DRAWING_TOOLS::setTransitions(), SYMBOL_EDITOR_EDIT_TOOL::setTransitions(), SYMBOL_EDITOR_MOVE_TOOL::setTransitions(), SYMBOL_EDITOR_PIN_TOOL::setTransitions(), GERBVIEW_CONTROL::setTransitions(), GERBVIEW_INSPECTION_TOOL::setTransitions(), GERBVIEW_SELECTION_TOOL::setTransitions(), COMMON_CONTROL::setTransitions(), COMMON_TOOLS::setTransitions(), PICKER_TOOL::setTransitions(), PROPERTIES_TOOL::setTransitions(), ZOOM_TOOL::setTransitions(), KICAD_MANAGER_CONTROL::setTransitions(), PL_DRAWING_TOOLS::setTransitions(), PL_EDIT_TOOL::setTransitions(), PL_EDITOR_CONTROL::setTransitions(), PL_POINT_EDITOR::setTransitions(), PL_SELECTION_TOOL::setTransitions(), PCB_CALCULATOR_CONTROL::setTransitions(), AUTOPLACE_TOOL::setTransitions(), MICROWAVE_TOOL::setTransitions(), SCRIPTING_TOOL::setTransitions(), ROUTER_TOOL::setTransitions(), BOARD_EDITOR_CONTROL::setTransitions(), BOARD_INSPECTION_TOOL::setTransitions(), BOARD_REANNOTATE_TOOL::setTransitions(), CONVERT_TOOL::setTransitions(), DRAWING_TOOL::setTransitions(), DRC_TOOL::setTransitions(), EDIT_TOOL::setTransitions(), setTransitions(), GENERATOR_TOOL::setTransitions(), GLOBAL_EDIT_TOOL::setTransitions(), GROUP_TOOL::setTransitions(), PAD_TOOL::setTransitions(), PCB_CONTROL::setTransitions(), PCB_EDIT_TABLE_TOOL::setTransitions(), PCB_PICKER_TOOL::setTransitions(), PCB_POINT_EDITOR::setTransitions(), PCB_SELECTION_TOOL::setTransitions(), PCB_VIEWER_TOOLS::setTransitions(), ALIGN_DISTRIBUTE_TOOL::setTransitions(), POSITION_RELATIVE_TOOL::setTransitions(), ZONE_FILLER_TOOL::setTransitions(), and PCB_TEST_SELECTION_TOOL::setTransitions().

goInternal()

void TOOL_INTERACTIVE::goInternal ( TOOL_STATE_FUNC &  aState, const TOOL_EVENT_LIST &  aConditions  )

privateinherited

Definition at line 74 of file tool_interactive.cpp.

References TOOL_BASE::GetName(), kicadTraceToolStack, TOOL_BASE::m_toolMgr, TOOL_EVENT_LIST::Names(), and TOOL_MANAGER::ScheduleNextState().

Referenced by TOOL_INTERACTIVE::Go().

ImportFootprint()

int FOOTPRINT_EDITOR_CONTROL::ImportFootprint

(

const TOOL_EVENT &

aEvent

)

Definition at line 551 of file footprint_editor_control.cpp.

References FOOTPRINT_EDIT_FRAME::Clear_Pcb(), EDA_ITEM::ClearFlags(), EDA_BASE_FRAME::ClearUndoRedoList(), PCB_TOOL_BASE::frame(), PCB_BASE_FRAME::GetBoard(), BOARD::GetFirstFootprint(), TOOL_BASE::getViewControls(), FOOTPRINT_EDIT_FRAME::ImportFootprint(), FOOTPRINT_EDIT_FRAME::IsCurrentFPFromBoard(), m_frame, TOOL_BASE::m_toolMgr, FOOTPRINT_EDIT_FRAME::OnModify(), FOOTPRINT_EDIT_FRAME::ReCreateHToolbar(), EDA_BASE_FRAME::ReCreateMenuBar(), TOOL_MANAGER::RunAction(), KIGFX::VIEW_CONTROLS::SetCrossHairCursorPosition(), and ACTIONS::zoomFitScreen.

Referenced by setTransitions().

Init()

bool FOOTPRINT_EDITOR_CONTROL::Init ( )

overridevirtual

Init() is called once upon a registration of the tool.

Returns

True if the initialization went fine, false - otherwise.

Reimplemented from PCB_TOOL_BASE.

Definition at line 75 of file footprint_editor_control.cpp.

References CONDITIONAL_MENU::AddItem(), CONDITIONAL_MENU::AddSeparator(), PCB_ACTIONS::copyFootprint, PCB_ACTIONS::createFootprint, PCB_ACTIONS::cutFootprint, PCB_ACTIONS::deleteFootprint, PCB_ACTIONS::duplicateFootprint, UTF8::empty(), PCB_ACTIONS::exportFootprint, PCB_BASE_FRAME::GetBoard(), ADVANCED_CFG::GetCfg(), FOOTPRINT_EDIT_FRAME::GetCurrentTreeNode(), BOARD::GetFirstFootprint(), LIB_ID::GetLibItemName(), LIB_ID::GetLibNickname(), TOOL_MENU::GetMenu(), FOOTPRINT_EDIT_FRAME::GetTreeFPID(), PCB_ACTIONS::hideFootprintTree, PCB_ACTIONS::importFootprint, FOOTPRINT_EDIT_FRAME::IsContentModified(), LIB_TREE_NODE::LIBRARY, ADVANCED_CFG::m_EnableLibWithText, m_frame, TOOL_INTERACTIVE::m_menu, LIB_TREE_NODE::m_Pinned, LIB_TREE_NODE::m_Type, PCB_ACTIONS::newFootprint, PCB_ACTIONS::openWithTextEditor, PCB_ACTIONS::pasteFootprint, ACTIONS::pinLibrary, PCB_ACTIONS::renameFootprint, ACTIONS::revert, ACTIONS::save, ACTIONS::saveAs, SELECTION_CONDITIONS::ShowAlways(), and ACTIONS::unpinLibrary.

Is45Limited()

bool PCB_TOOL_BASE::Is45Limited ( ) const

virtualinherited

Should the tool use its 45° mode option?

Returns

True if set to use 45°

Definition at line 329 of file pcb_tool_base.cpp.

References PCB_TOOL_BASE::frame(), FRAME_PCB_EDITOR, SETTINGS_MANAGER::GetAppSettings(), PGM_BASE::GetSettingsManager(), and Pgm().

Referenced by DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawShape(), DRAWING_TOOL::DrawZone(), and ZONE_CREATE_HELPER::OnFirstPoint().

IsBoardEditor()

bool PCB_TOOL_BASE::IsBoardEditor ( ) const

inlineinherited

Definition at line 109 of file pcb_tool_base.h.

References PCB_TOOL_BASE::m_isBoardEditor.

IsFootprintEditor()

bool PCB_TOOL_BASE::IsFootprintEditor ( ) const

inlineinherited

Definition at line 106 of file pcb_tool_base.h.

References PCB_TOOL_BASE::m_isFootprintEditor.

Referenced by EDIT_TOOL::DeleteItems(), EDIT_TOOL::Flip(), and PCB_GRID_HELPER::queryVisible().

IsToolActive()

bool TOOL_BASE::IsToolActive ( ) const

inherited

Definition at line 31 of file tool_base.cpp.

References TOOL_MANAGER::IsToolActive(), TOOL_BASE::m_toolId, and TOOL_BASE::m_toolMgr.

Referenced by EDIT_TOOL::Drag(), ROUTER_TOOL::handleLayerSwitch(), EDIT_TOOL::invokeInlineRouter(), PCB_SELECTION_TOOL::Main(), BOARD_EDITOR_CONTROL::TrackWidthDec(), and BOARD_EDITOR_CONTROL::TrackWidthInc().

NewFootprint()

int FOOTPRINT_EDITOR_CONTROL::NewFootprint

(

const TOOL_EVENT &

aEvent

)

Definition at line 170 of file footprint_editor_control.cpp.

References FOOTPRINT_EDIT_FRAME::AddFootprintToBoard(), PCB_TOOL_BASE::board(), BOARD::BuildListOfNets(), PCB_TOOL_BASE::canvas(), FOOTPRINT_EDIT_FRAME::Clear_Pcb(), EDA_ITEM::ClearFlags(), FOOTPRINT_EDIT_FRAME::ClearModify(), PCB_BASE_FRAME::CreateNewFootprint(), UTF8::empty(), FOOTPRINT::GetFPID(), LIB_ID::GetLibNickname(), PCB_BASE_FRAME::GetScreen(), FOOTPRINT_EDIT_FRAME::GetTreeFPID(), LIB_ID::GetUniStringLibNickname(), EDA_DRAW_PANEL_GAL::GetViewControls(), m_frame, FOOTPRINT_EDIT_FRAME::SaveFootprint(), BASE_SCREEN::SetContentModified(), KIGFX::VIEW_CONTROLS::SetCrossHairCursorPosition(), FOOTPRINT::SetFPID(), LIB_ID::SetLibNickname(), FOOTPRINT::SetPosition(), FOOTPRINT_EDIT_FRAME::SyncLibraryTree(), PCB_BASE_FRAME::Update3DView(), FOOTPRINT_EDIT_FRAME::UpdateView(), and EDA_DRAW_FRAME::Zoom_Automatique().

Referenced by setTransitions().

OpenWithTextEditor()

int FOOTPRINT_EDITOR_CONTROL::OpenWithTextEditor

(

const TOOL_EVENT &

aEvent

)

Definition at line 588 of file footprint_editor_control.cpp.

References _, UTF8::c_str(), ExecuteFile(), LIB_ID::GetLibItemName(), LIB_ID::GetLibNickname(), PGM_BASE::GetTextEditor(), FOOTPRINT_EDIT_FRAME::GetTreeFPID(), GFootprintTable, m_frame, PROJECT_PCB::PcbFootprintLibs(), Pgm(), and KIWAY_HOLDER::Prj().

Referenced by setTransitions().

PasteFootprint()

int FOOTPRINT_EDITOR_CONTROL::PasteFootprint

(

const TOOL_EVENT &

aEvent

)

Definition at line 374 of file footprint_editor_control.cpp.

References _, UTF8::empty(), FOOTPRINT_EDIT_FRAME::FocusOnLibID(), FP_LIB_TABLE::FootprintExists(), LIB_ID::GetLibNickname(), FOOTPRINT_EDIT_FRAME::GetTreeFPID(), FOOTPRINT_EDIT_FRAME::LoadFootprintFromLibrary(), m_copiedFootprint, m_frame, PROJECT_PCB::PcbFootprintLibs(), KIWAY_HOLDER::Prj(), FOOTPRINT_EDIT_FRAME::RefreshLibraryTree(), FOOTPRINT_EDIT_FRAME::SaveFootprintInLibrary(), and FOOTPRINT_EDIT_FRAME::SyncLibraryTree().

Referenced by setTransitions().

PinLibrary()

int FOOTPRINT_EDITOR_CONTROL::PinLibrary

(

const TOOL_EVENT &

aEvent

)

Definition at line 632 of file footprint_editor_control.cpp.

References FOOTPRINT_EDIT_FRAME::GetCurrentTreeNode(), LIB_ID::GetLibNickname(), m_frame, LIB_TREE_NODE::m_LibId, LIB_TREE_NODE::m_Pinned, PROJECT::PinLibrary(), KIWAY_HOLDER::Prj(), and FOOTPRINT_EDIT_FRAME::RegenerateLibraryTree().

Referenced by setTransitions().

Properties()

int FOOTPRINT_EDITOR_CONTROL::Properties

(

const TOOL_EVENT &

aEvent

)

Definition at line 685 of file footprint_editor_control.cpp.

References PCB_TOOL_BASE::footprint(), PCB_BASE_FRAME::GetBoard(), PCB_BASE_FRAME::GetCanvas(), BOARD::GetFirstFootprint(), m_frame, and EDA_DRAW_PANEL_GAL::Refresh().

Referenced by setTransitions().

RenameFootprint()

int FOOTPRINT_EDITOR_CONTROL::RenameFootprint

(

const TOOL_EVENT &

aEvent

)

Definition at line 446 of file footprint_editor_control.cpp.

References DisplayError(), FOOTPRINT_EDIT_FRAME::FocusOnLibID(), PCB_TOOL_BASE::footprint(), FP_LIB_TABLE::FootprintDelete(), FP_LIB_TABLE::FootprintExists(), PCB_BASE_FRAME::GetBoard(), BOARD::GetFirstFootprint(), RENAME_DIALOG::GetFPName(), LIB_ID::GetLibItemName(), LIB_ID::GetLibNickname(), FOOTPRINT_EDIT_FRAME::GetLibTreeAdapter(), FOOTPRINT_EDIT_FRAME::GetLoadedFPID(), FOOTPRINT_EDIT_FRAME::GetTreeFPID(), FOOTPRINT::GetValue(), PCB_BASE_FRAME::LoadFootprint(), m_frame, FOOTPRINT_EDIT_FRAME::OnModify(), PROJECT_PCB::PcbFootprintLibs(), KIWAY_HOLDER::Prj(), FOOTPRINT_EDIT_FRAME::SaveFootprintInLibrary(), FOOTPRINT::SetFPID(), FOOTPRINT::SetValue(), FOOTPRINT_EDIT_FRAME::UpdateLibraryTree(), FOOTPRINT_EDIT_FRAME::UpdateView(), and IO_ERROR::What().

Referenced by setTransitions().

RepairFootprint()

int FOOTPRINT_EDITOR_CONTROL::RepairFootprint

(

const TOOL_EVENT &

aEvent

)

Definition at line 752 of file footprint_editor_control.cpp.

References _, PCB_TOOL_BASE::board(), DisplayInfoMessage(), PCB_TOOL_BASE::footprint(), BOARD::Footprints(), FOOTPRINT::GraphicalItems(), group, FOOTPRINT::Groups(), m_frame, FOOTPRINT_EDIT_FRAME::OnModify(), pad, FOOTPRINT::Pads(), FOOTPRINT::Reference(), FOOTPRINT::Value(), and FOOTPRINT::Zones().

Referenced by setTransitions().

Reset()

void FOOTPRINT_EDITOR_CONTROL::Reset ( RESET_REASON  aReason )

overridevirtual

Bring the tool to a known, initial state.

If the tool claimed anything from the model or the view, it must release it when its reset.

Parameters

aReason

contains information about the reason of tool reset.

Reimplemented from PCB_TOOL_BASE.

Definition at line 66 of file footprint_editor_control.cpp.

References DestroyCheckerDialog(), m_checkerDialog, and m_frame.

resetTransitions()

void TOOL_INTERACTIVE::resetTransitions ( )

privateinherited

Clear the current transition map and restores the default one created by setTransitions().

Definition at line 67 of file tool_interactive.cpp.

References TOOL_MANAGER::ClearTransitions(), TOOL_BASE::m_toolMgr, and TOOL_INTERACTIVE::setTransitions().

Revert()

int FOOTPRINT_EDITOR_CONTROL::Revert

(

const TOOL_EVENT &

aEvent

)

Definition at line 346 of file footprint_editor_control.cpp.

Referenced by setTransitions().

RunMainStack()

void TOOL_INTERACTIVE::RunMainStack ( std::function< void()>  aFunc )

inherited

Call a function using the main stack.

Parameters

aFunc

is the function to be calls.

Definition at line 95 of file tool_interactive.cpp.

References TOOL_BASE::m_toolMgr, and TOOL_MANAGER::RunMainStack().

Referenced by DRAWING_TOOL::PlaceText().

Save()

int FOOTPRINT_EDITOR_CONTROL::Save

(

const TOOL_EVENT &

aEvent

)

Definition at line 278 of file footprint_editor_control.cpp.

References PCB_TOOL_BASE::canvas(), FOOTPRINT_EDIT_FRAME::ClearModify(), PCB_TOOL_BASE::footprint(), EDA_DRAW_PANEL_GAL::ForceRefresh(), FOOTPRINT_EDIT_FRAME::GetLoadedFPID(), FOOTPRINT_EDIT_FRAME::GetTargetFPID(), m_frame, FOOTPRINT_EDIT_FRAME::RefreshLibraryTree(), FOOTPRINT_EDIT_FRAME::SaveFootprint(), KIGFX::PCB_VIEW::Update(), FOOTPRINT_EDIT_FRAME::UpdateTitle(), and PCB_TOOL_BASE::view().

Referenced by setTransitions().

SaveAs()

int FOOTPRINT_EDITOR_CONTROL::SaveAs

(

const TOOL_EVENT &

aEvent

)

Definition at line 300 of file footprint_editor_control.cpp.

References PCB_TOOL_BASE::canvas(), FOOTPRINT_EDIT_FRAME::ClearModify(), WX_INFOBAR::Dismiss(), UTF8::empty(), FOOTPRINT_EDIT_FRAME::FocusOnLibID(), PCB_TOOL_BASE::footprint(), EDA_DRAW_PANEL_GAL::ForceRefresh(), FOOTPRINT::GetFPID(), LIB_TABLE::GetFullURI(), EDA_BASE_FRAME::GetInfoBar(), LIB_ID::GetLibItemName(), LIB_ID::GetLibNickname(), FOOTPRINT_EDIT_FRAME::GetLoadedFPID(), FOOTPRINT_EDIT_FRAME::GetTargetFPID(), WX_INFOBAR::HasCloseButton(), PCB_BASE_FRAME::LoadFootprint(), m_frame, PROJECT_PCB::PcbFootprintLibs(), KIWAY_HOLDER::Prj(), FOOTPRINT_EDIT_FRAME::RefreshLibraryTree(), FOOTPRINT_EDIT_FRAME::SaveFootprintAs(), FOOTPRINT_EDIT_FRAME::SaveLibraryAs(), FOOTPRINT_EDIT_FRAME::SyncLibraryTree(), KIGFX::PCB_VIEW::Update(), and PCB_TOOL_BASE::view().

Referenced by setTransitions().

selection() [1/2]

PCB_SELECTION & PCB_TOOL_BASE::selection ( )

protectedinherited

Definition at line 321 of file pcb_tool_base.cpp.

References PCB_SELECTION_TOOL::GetSelection(), TOOL_MANAGER::GetTool(), and TOOL_BASE::m_toolMgr.

selection() [2/2]

const PCB_SELECTION & PCB_TOOL_BASE::selection ( ) const

protectedinherited

Definition at line 313 of file pcb_tool_base.cpp.

References PCB_SELECTION_TOOL::GetSelection(), TOOL_MANAGER::GetTool(), and TOOL_BASE::m_toolMgr.

Referenced by BOARD_EDITOR_CONTROL::AssignNetclass(), AUTOPLACE_TOOL::autoplaceSelected(), BOARD_INSPECTION_TOOL::calculateSelectionRatsnest(), ROUTER_TOOL::CanInlineDrag(), EDIT_TOOL::ChangeTrackWidth(), PAD_TOOL::copyPadSettings(), DRC_TOOL::CrossProbe(), BOARD_INSPECTION_TOOL::DiffFootprint(), BOARD_EDITOR_CONTROL::doCrossProbePcbToSch(), BOARD_INSPECTION_TOOL::doHideRatsnestNet(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), EDIT_TOOL::Drag(), EDIT_TOOL::DragArcTrack(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawShape(), DRAWING_TOOL::DrawTable(), DRAWING_TOOL::DrawZone(), BOARD_EDITOR_CONTROL::EditFpInFpEditor(), PAD_TOOL::EditPad(), PCB_EDIT_TABLE_TOOL::EditTable(), GROUP_TOOL::EnterGroup(), PAD_TOOL::EnumeratePads(), GLOBAL_EDIT_TOOL::ExchangeFootprints(), EDIT_TOOL::FilletTracks(), DRAWING_TOOL::getSourceZoneForAction(), GROUP_TOOL::Group(), BOARD_INSPECTION_TOOL::highlightNet(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), BOARD_INSPECTION_TOOL::InspectClearance(), BOARD_INSPECTION_TOOL::InspectConstraints(), DRAWING_TOOL::InteractivePlaceWithPreview(), BOARD_INSPECTION_TOOL::LocalRatsnestTool(), ROUTER_TOOL::MainLoop(), EDIT_TOOL::ModifyLines(), BOARD_EDITOR_CONTROL::modifyLockSelected(), PCB_POINT_EDITOR::OnSelectionChange(), EDIT_TOOL::PackAndMoveFootprints(), PAD_TOOL::pastePadProperties(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), PCB_CONTROL::placeBoardItems(), BOARD_EDITOR_CONTROL::PlaceFootprint(), DRAWING_TOOL::PlaceImportedGraphics(), DRAWING_TOOL::PlaceText(), POSITION_RELATIVE_TOOL::PositionRelative(), PAD_TOOL::pushPadSettings(), BOARD_REANNOTATE_TOOL::ReannotateDuplicatesInSelection(), GROUP_TOOL::RemoveFromGroup(), GLOBAL_EDIT_TOOL::RemoveUnusedPads(), ROUTER_TOOL::RouteSelected(), DRAWING_TOOL::SetAnchor(), BOARD_INSPECTION_TOOL::ShowFootprintLinks(), EDIT_TOOL::Swap(), BOARD_EDITOR_CONTROL::TrackWidthDec(), BOARD_EDITOR_CONTROL::TrackWidthInc(), GROUP_TOOL::Ungroup(), BOARD_INSPECTION_TOOL::UpdateLocalRatsnest(), PCB_CONTROL::UpdateMessagePanel(), BOARD_EDITOR_CONTROL::ViaSizeDec(), BOARD_EDITOR_CONTROL::ViaSizeInc(), BOARD_EDITOR_CONTROL::ZoneDuplicate(), and BOARD_EDITOR_CONTROL::ZoneMerge().

SetContextMenu()

void TOOL_INTERACTIVE::SetContextMenu ( ACTION_MENU *  aMenu, CONTEXT_MENU_TRIGGER  aTrigger = CMENU_BUTTON  )

inherited

Assign a context menu and tells when it should be activated.

Parameters

aMenu	is the menu to be assigned.
aTrigger	determines conditions upon which the context menu is activated.

Definition at line 84 of file tool_interactive.cpp.

References CMENU_OFF, TOOL_BASE::m_toolMgr, TOOL_MANAGER::ScheduleContextMenu(), and ACTION_MENU::SetTool().

Referenced by SELECTION_TOOL::doSelectionMenu(), DRAWING_TOOL::DrawVia(), TOOL_MENU::ShowContextMenu(), and SCH_LINE_WIRE_BUS_TOOL::UnfoldBus().

SetIsBoardEditor()

void PCB_TOOL_BASE::SetIsBoardEditor ( bool  aEnabled )

inlineinherited

Definition at line 108 of file pcb_tool_base.h.

References PCB_TOOL_BASE::m_isBoardEditor.

SetIsFootprintEditor()

void PCB_TOOL_BASE::SetIsFootprintEditor ( bool  aEnabled )

inlineinherited

Function SetIsFootprintEditor()

Toggles edit footprint mode. When enabled, one may select parts of footprints individually (graphics, pads, etc.), so they can be modified.

Parameters

aEnabled

decides if the mode should be enabled.

Definition at line 105 of file pcb_tool_base.h.

References PCB_TOOL_BASE::m_isFootprintEditor.

setTransitions()

void FOOTPRINT_EDITOR_CONTROL::setTransitions ( )

overrideprivatevirtual

< Set up handlers for various events.

Reimplemented from PCB_TOOL_BASE.

Definition at line 828 of file footprint_editor_control.cpp.

References CheckFootprint(), PCB_ACTIONS::checkFootprint, CleanupGraphics(), PCB_ACTIONS::cleanupGraphics, PCB_ACTIONS::copyFootprint, CreateFootprint(), PCB_ACTIONS::createFootprint, CutCopyFootprint(), PCB_ACTIONS::cutFootprint, DefaultPadProperties(), PCB_ACTIONS::defaultPadProperties, DeleteFootprint(), PCB_ACTIONS::deleteFootprint, DuplicateFootprint(), PCB_ACTIONS::duplicateFootprint, EditFootprint(), PCB_ACTIONS::editFootprint, EditTextAndGraphics(), PCB_ACTIONS::editTextAndGraphics, ExportFootprint(), PCB_ACTIONS::exportFootprint, PCB_ACTIONS::footprintProperties, TOOL_INTERACTIVE::Go(), PCB_ACTIONS::hideFootprintTree, ImportFootprint(), PCB_ACTIONS::importFootprint, NewFootprint(), PCB_ACTIONS::newFootprint, OpenWithTextEditor(), PCB_ACTIONS::openWithTextEditor, PasteFootprint(), PCB_ACTIONS::pasteFootprint, ACTIONS::pinLibrary, PinLibrary(), Properties(), RenameFootprint(), PCB_ACTIONS::renameFootprint, RepairFootprint(), PCB_ACTIONS::repairFootprint, ACTIONS::revert, Revert(), ACTIONS::save, Save(), ACTIONS::saveAs, SaveAs(), PCB_ACTIONS::showFootprintTree, PCB_ACTIONS::showLayersManager, ACTIONS::showProperties, ToggleFootprintTree(), ToggleLayersManager(), ToggleProperties(), ACTIONS::unpinLibrary, and UnpinLibrary().

ToggleFootprintTree()

int FOOTPRINT_EDITOR_CONTROL::ToggleFootprintTree

(

const TOOL_EVENT &

aEvent

)

Definition at line 664 of file footprint_editor_control.cpp.

References m_frame, and FOOTPRINT_EDIT_FRAME::ToggleSearchTree().

Referenced by setTransitions().

ToggleLayersManager()

int FOOTPRINT_EDITOR_CONTROL::ToggleLayersManager

(

const TOOL_EVENT &

aEvent

)

Definition at line 671 of file footprint_editor_control.cpp.

References m_frame, and FOOTPRINT_EDIT_FRAME::ToggleLayersManager().

Referenced by setTransitions().

ToggleProperties()

int FOOTPRINT_EDITOR_CONTROL::ToggleProperties

(

const TOOL_EVENT &

aEvent

)

Definition at line 678 of file footprint_editor_control.cpp.

References m_frame, and PCB_BASE_EDIT_FRAME::ToggleProperties().

Referenced by setTransitions().

UnpinLibrary()

int FOOTPRINT_EDITOR_CONTROL::UnpinLibrary

(

const TOOL_EVENT &

aEvent

)

Definition at line 648 of file footprint_editor_control.cpp.

References FOOTPRINT_EDIT_FRAME::GetCurrentTreeNode(), LIB_ID::GetLibNickname(), m_frame, LIB_TREE_NODE::m_LibId, LIB_TREE_NODE::m_Pinned, KIWAY_HOLDER::Prj(), FOOTPRINT_EDIT_FRAME::RegenerateLibraryTree(), and PROJECT::UnpinLibrary().

Referenced by setTransitions().

view()

KIGFX::PCB_VIEW * PCB_TOOL_BASE::view ( ) const

inlineprotectedinherited

Definition at line 155 of file pcb_tool_base.h.

References TOOL_BASE::getView().

Referenced by AUTOPLACE_TOOL::autoplace(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), MICROWAVE_TOOL::drawMicrowaveInductor(), PAD_TOOL::EditPad(), PAD_TOOL::ExitPadEditMode(), PCB_CONTROL::FlipPcbView(), ROUTER_TOOL::handleLayerSwitch(), BOARD_INSPECTION_TOOL::highlightNet(), ROUTER_TOOL::InlineDrag(), DRAWING_TOOL::InteractivePlaceWithPreview(), PCB_CONTROL::LayerAlphaDec(), PCB_CONTROL::LayerAlphaInc(), PAD_TOOL::OnUndoRedo(), ROUTER_TOOL::performDragging(), Save(), SaveAs(), PCB_CONTROL::TrackDisplayMode(), PCB_POINT_EDITOR::updateItem(), PCB_CONTROL::ViaDisplayMode(), and PCB_CONTROL::ZoneDisplayMode().

Wait()

TOOL_EVENT * TOOL_INTERACTIVE::Wait ( const TOOL_EVENT_LIST &  aEventList = TOOL_EVENT( TC_ANY, TA_ANY ) )

inherited

Suspend execution of the tool until an event specified in aEventList arrives.

No parameters means waiting for any event.

Definition at line 61 of file tool_interactive.cpp.

References TOOL_BASE::m_toolMgr, and TOOL_MANAGER::ScheduleWait().

Referenced by SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), SYMBOL_EDITOR_DRAWING_TOOLS::doDrawShape(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), SYMBOL_EDITOR_MOVE_TOOL::doMoveSelection(), SCH_MOVE_TOOL::doMoveSelection(), SELECTION_TOOL::doSelectionMenu(), EDIT_TOOL::DragArcTrack(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), SCH_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), DRAWING_TOOL::drawShape(), SCH_DRAWING_TOOLS::DrawSheet(), SCH_DRAWING_TOOLS::DrawTable(), DRAWING_TOOL::DrawTable(), DRAWING_TOOL::DrawVia(), DRAWING_TOOL::DrawZone(), PAD_TOOL::EnumeratePads(), SCH_DRAWING_TOOLS::ImportGraphics(), SYMBOL_EDITOR_DRAWING_TOOLS::ImportGraphics(), ROUTER_TOOL::InlineDrag(), DRAWING_TOOL::InteractivePlaceWithPreview(), EDA_3D_CONTROLLER::Main(), CVPCB_CONTROL::Main(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::Main(), EE_POINT_EDITOR::Main(), EE_SELECTION_TOOL::Main(), GERBVIEW_SELECTION_TOOL::Main(), PICKER_TOOL::Main(), ZOOM_TOOL::Main(), PL_EDIT_TOOL::Main(), PL_POINT_EDITOR::Main(), PL_SELECTION_TOOL::Main(), PCB_PICKER_TOOL::Main(), PCB_SELECTION_TOOL::Main(), PCB_TEST_SELECTION_TOOL::Main(), ROUTER_TOOL::MainLoop(), GERBVIEW_INSPECTION_TOOL::MeasureTool(), PCB_VIEWER_TOOLS::MeasureTool(), PCB_POINT_EDITOR::OnSelectionChange(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), EDIT_TOOL::pickReferencePoint(), SYMBOL_EDITOR_DRAWING_TOOLS::PlaceAnchor(), BOARD_EDITOR_CONTROL::PlaceFootprint(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), DRAWING_TOOL::PlaceReferenceImage(), SCH_DRAWING_TOOLS::PlaceSymbol(), DRAWING_TOOL::PlaceText(), DRAWING_TOOL::PlaceTuningPattern(), EE_SELECTION_TOOL::selectMultiple(), PL_SELECTION_TOOL::selectMultiple(), PCB_SELECTION_TOOL::selectMultiple(), PCB_SELECTION_TOOL::selectPoint(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), ZOOM_TOOL::selectRegion(), PCB_SELECTION_TOOL::selectTableCells(), EE_SELECTION_TOOL::selectTableCells(), DRAWING_TOOL::SetAnchor(), SCH_DRAWING_TOOLS::SingleClickPlace(), SCH_DRAWING_TOOLS::TwoClickPlace(), SYMBOL_EDITOR_DRAWING_TOOLS::TwoClickPlace(), and SCH_LINE_WIRE_BUS_TOOL::UnfoldBus().

Member Data Documentation

m_checkerDialog

DIALOG_FOOTPRINT_CHECKER* FOOTPRINT_EDITOR_CONTROL::m_checkerDialog

private

Definition at line 94 of file footprint_editor_control.h.

Referenced by CheckFootprint(), CrossProbe(), DestroyCheckerDialog(), and Reset().

m_copiedFootprint

std::unique_ptr<FOOTPRINT> FOOTPRINT_EDITOR_CONTROL::m_copiedFootprint

private

Definition at line 97 of file footprint_editor_control.h.

Referenced by CutCopyFootprint(), and PasteFootprint().

m_frame

FOOTPRINT_EDIT_FRAME* FOOTPRINT_EDITOR_CONTROL::m_frame

private

Definition at line 93 of file footprint_editor_control.h.

Referenced by CheckFootprint(), CreateFootprint(), CrossProbe(), CutCopyFootprint(), DuplicateFootprint(), EditFootprint(), ExportFootprint(), ImportFootprint(), Init(), NewFootprint(), OpenWithTextEditor(), PasteFootprint(), PinLibrary(), Properties(), RenameFootprint(), RepairFootprint(), Reset(), Save(), SaveAs(), ToggleFootprintTree(), ToggleLayersManager(), ToggleProperties(), and UnpinLibrary().

m_isBoardEditor

bool PCB_TOOL_BASE::m_isBoardEditor

protectedinherited

Definition at line 187 of file pcb_tool_base.h.

Referenced by PCB_TOOL_BASE::IsBoardEditor(), PCB_CONTROL::placeBoardItems(), PCB_TOOL_BASE::SetIsBoardEditor(), and PCB_CONTROL::UpdateMessagePanel().

m_isFootprintEditor

bool PCB_TOOL_BASE::m_isFootprintEditor

protectedinherited

Definition at line 186 of file pcb_tool_base.h.

Referenced by EDIT_TOOL::CreateArray(), ZONE_CREATE_HELPER::createNewZone(), EDIT_TOOL::doMoveSelection(), DRAWING_TOOL::DrawArc(), DRAWING_TOOL::DrawCircle(), DRAWING_TOOL::DrawDimension(), DRAWING_TOOL::DrawLine(), DRAWING_TOOL::DrawRectangle(), DRAWING_TOOL::DrawVia(), DRAWING_TOOL::DrawZone(), EDIT_TOOL::Duplicate(), PAD_TOOL::EditPad(), PAD_TOOL::EnumeratePads(), PCB_CONTROL::GridPlaceOrigin(), GROUP_TOOL::Group(), EDIT_TOOL::Init(), PAD_TOOL::Init(), PCB_CONTROL::InteractiveDelete(), DRAWING_TOOL::InteractivePlaceWithPreview(), PCB_TOOL_BASE::IsFootprintEditor(), PCB_POINT_EDITOR::makePoints(), PCB_CONTROL::Paste(), PAD_TOOL::PlacePad(), DRAWING_TOOL::PlaceText(), DRAWING_TOOL::PlaceTuningPattern(), POSITION_RELATIVE_TOOL::PositionRelative(), PCB_CONTROL::Print(), PCB_CONTROL::pruneItemLayers(), SCRIPTING_TOOL::reloadPlugins(), EDIT_TOOL::Rotate(), DRAWING_TOOL::SetAnchor(), PCB_TOOL_BASE::SetIsFootprintEditor(), PCB_CONTROL::SnapMode(), and PCB_CONTROL::SnapModeFeedback().

m_menu

TOOL_MENU TOOL_INTERACTIVE::m_menu

protectedinherited

The functions below are not yet implemented - their interface may change.

Definition at line 125 of file tool_interactive.h.

Referenced by SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), SYMBOL_EDITOR_DRAWING_TOOLS::doDrawShape(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), SYMBOL_EDITOR_MOVE_TOOL::doMoveSelection(), SCH_MOVE_TOOL::doMoveSelection(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), SCH_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), DRAWING_TOOL::drawShape(), SCH_DRAWING_TOOLS::DrawSheet(), SCH_DRAWING_TOOLS::DrawTable(), DRAWING_TOOL::DrawTable(), DRAWING_TOOL::DrawZone(), PAD_TOOL::EnumeratePads(), TOOL_INTERACTIVE::GetToolMenu(), SCH_DRAWING_TOOLS::ImportGraphics(), SYMBOL_EDITOR_DRAWING_TOOLS::ImportGraphics(), EDA_3D_CONTROLLER::Init(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::Init(), EE_SELECTION_TOOL::Init(), EE_TOOL_BASE< T >::Init(), SCH_DRAWING_TOOLS::Init(), SCH_LINE_WIRE_BUS_TOOL::Init(), SYMBOL_EDITOR_CONTROL::Init(), SYMBOL_EDITOR_DRAWING_TOOLS::Init(), GERBVIEW_SELECTION_TOOL::Init(), PICKER_TOOL::Init(), ZOOM_TOOL::Init(), PL_DRAWING_TOOLS::Init(), PL_EDIT_TOOL::Init(), PL_SELECTION_TOOL::Init(), ROUTER_TOOL::Init(), BOARD_EDITOR_CONTROL::Init(), DRAWING_TOOL::Init(), Init(), PAD_TOOL::Init(), PCB_SELECTION_TOOL::Init(), PCB_TOOL_BASE::Init(), PCB_VIEWER_TOOLS::Init(), DRAWING_TOOL::InteractivePlaceWithPreview(), EDA_3D_CONTROLLER::Main(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::Main(), EE_SELECTION_TOOL::Main(), GERBVIEW_SELECTION_TOOL::Main(), PICKER_TOOL::Main(), ZOOM_TOOL::Main(), PL_EDIT_TOOL::Main(), PL_SELECTION_TOOL::Main(), PCB_PICKER_TOOL::Main(), PCB_SELECTION_TOOL::Main(), ROUTER_TOOL::MainLoop(), GERBVIEW_INSPECTION_TOOL::MeasureTool(), PCB_VIEWER_TOOLS::MeasureTool(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), SYMBOL_EDITOR_DRAWING_TOOLS::PlaceAnchor(), BOARD_EDITOR_CONTROL::PlaceFootprint(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), DRAWING_TOOL::PlaceReferenceImage(), SCH_DRAWING_TOOLS::PlaceSymbol(), DRAWING_TOOL::PlaceText(), DRAWING_TOOL::PlaceTuningPattern(), DRAWING_TOOL::SetAnchor(), SCH_DRAWING_TOOLS::SingleClickPlace(), SCH_DRAWING_TOOLS::TwoClickPlace(), and SYMBOL_EDITOR_DRAWING_TOOLS::TwoClickPlace().

m_toolId

TOOL_ID TOOL_BASE::m_toolId

protectedinherited

Name of the tool.

Names are expected to obey the format application.ToolName (eg. pcbnew.InteractiveSelection).

Definition at line 211 of file tool_base.h.

Referenced by TOOL_INTERACTIVE::Activate(), TOOL_BASE::GetId(), and TOOL_BASE::IsToolActive().

m_toolMgr

TOOL_MANAGER* TOOL_BASE::m_toolMgr

protectedinherited

Definition at line 216 of file tool_base.h.

Referenced by TOOL_INTERACTIVE::Activate(), EE_POINT_EDITOR::addCorner(), SELECTION_TOOL::AddItemsToSel(), SELECTION_TOOL::AddItemToSel(), SYMBOL_EDITOR_MOVE_TOOL::AlignElements(), SCH_MOVE_TOOL::AlignToGrid(), SCH_EDITOR_CONTROL::AssignNetclass(), BOARD_EDITOR_CONTROL::AssignNetclass(), CVPCB_ASSOCIATION_TOOL::Associate(), TOOL_BASE::attachManager(), SCH_EDIT_TOOL::AutoplaceFields(), EE_SELECTION_TOOL::autostartEvent(), SCH_EDIT_TOOL::BreakWire(), BOARD_INSPECTION_TOOL::calculateSelectionRatsnest(), ROUTER_TOOL::CanInlineDrag(), SCH_EDIT_TOOL::ChangeBodyStyle(), SCH_EDITOR_CONTROL::ChangeLineMode(), SCH_EDIT_TOOL::ChangeTextType(), EDIT_TOOL::ChangeTrackWidth(), SCH_EDIT_TOOL::CleanupSheetPins(), GERBVIEW_CONTROL::ClearAllLayers(), SCH_EDITOR_CONTROL::ClearHighlight(), BOARD_INSPECTION_TOOL::ClearHighlight(), GERBVIEW_SELECTION_TOOL::clearSelection(), PL_SELECTION_TOOL::ClearSelection(), SCH_EDIT_TABLE_TOOL::clearSelection(), PCB_EDIT_TABLE_TOOL::clearSelection(), EE_SELECTION_TOOL::ClearSelection(), PCB_SELECTION_TOOL::ClearSelection(), SYMBOL_EDITOR_EDIT_TOOL::Copy(), PL_EDIT_TOOL::Copy(), PAD_TOOL::copyPadSettings(), EDIT_TOOL::copyToClipboard(), EDIT_TOOL::CreateArray(), MICROWAVE_TOOL::createInductorBetween(), EE_INSPECTION_TOOL::CrossProbe(), DRC_TOOL::CrossProbe(), COMMON_TOOLS::CursorControl(), SCH_EDITOR_CONTROL::Cut(), EDIT_TOOL::DeleteItems(), BOARD_INSPECTION_TOOL::DiffFootprint(), SCH_EDITOR_CONTROL::doCopy(), BOARD_EDITOR_CONTROL::doCrossProbePcbToSch(), SCH_EDITOR_CONTROL::doCrossProbeSchToPcb(), SCH_EDIT_TOOL::DoDelete(), SYMBOL_EDITOR_EDIT_TOOL::DoDelete(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), SYMBOL_EDITOR_DRAWING_TOOLS::doDrawShape(), BOARD_INSPECTION_TOOL::doHideRatsnestNet(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), SYMBOL_EDITOR_MOVE_TOOL::doMoveSelection(), SCH_MOVE_TOOL::doMoveSelection(), PCB_SELECTION_TOOL::doSyncSelection(), SCH_DRAWING_TOOLS::doSyncSheetsPins(), SCH_LINE_WIRE_BUS_TOOL::doUnfoldBus(), COMMON_TOOLS::doZoomInOut(), COMMON_TOOLS::doZoomToPreset(), EDIT_TOOL::Drag(), DRAWING_TOOL::DrawArc(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawCircle(), DRAWING_TOOL::DrawDimension(), DRAWING_TOOL::DrawRectangle(), SCH_LINE_WIRE_BUS_TOOL::DrawSegments(), SCH_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), DRAWING_TOOL::drawShape(), SCH_DRAWING_TOOLS::DrawSheet(), SCH_DRAWING_TOOLS::DrawTable(), DRAWING_TOOL::DrawTable(), DRAWING_TOOL::DrawZone(), BOARD_EDITOR_CONTROL::DrillOrigin(), SYMBOL_EDITOR_EDIT_TOOL::Duplicate(), EDIT_TOOL::Duplicate(), SCH_EDIT_TOOL::EditField(), SYMBOL_EDITOR_EDIT_TOOL::editFieldProperties(), SCH_EDIT_TOOL::editFieldText(), BOARD_EDITOR_CONTROL::EditFpInFpEditor(), PAD_TOOL::EditPad(), SYMBOL_EDITOR_EDIT_TOOL::editShapeProperties(), SYMBOL_EDITOR_EDIT_TOOL::editSymbolProperties(), SCH_EDIT_TABLE_TOOL::EditTable(), PCB_EDIT_TABLE_TOOL::EditTable(), SCH_EDITOR_CONTROL::EditWithSymbolEditor(), PCB_SELECTION_TOOL::EnterGroup(), GROUP_TOOL::EnterGroup(), SCH_NAVIGATE_TOOL::EnterSheet(), PAD_TOOL::EnumeratePads(), EE_INSPECTION_TOOL::ExcludeMarker(), PCB_SELECTION_TOOL::ExitGroup(), PCB_SELECTION_TOOL::expandConnection(), ZONE_FILLER_TOOL::FillAllZones(), PCB_SELECTION_TOOL::filterSelection(), PCB_SELECTION_TOOL::FindItem(), SCH_EDITOR_CONTROL::FindSymbolAndItem(), SCH_LINE_WIRE_BUS_TOOL::finishSegments(), EDIT_TOOL::Flip(), EDIT_TOOL::GetAndPlace(), TOOL_BASE::GetManager(), TOOL_BASE::getModelInt(), DRAWING_TOOL::getSourceZoneForAction(), PCB_EDIT_TABLE_TOOL::getTableCellSelection(), TOOL_BASE::getToolHolderInt(), SCH_EDIT_TABLE_TOOL::getToolMgr(), PCB_EDIT_TABLE_TOOL::getToolMgr(), TOOL_BASE::getView(), TOOL_BASE::getViewControls(), TOOL_INTERACTIVE::goInternal(), PCB_SELECTION_TOOL::grabUnconnected(), COMMON_TOOLS::GridFastCycle(), SCH_EDITOR_CONTROL::GridFeedback(), COMMON_TOOLS::GridNext(), COMMON_TOOLS::GridOrigin(), PCB_CONTROL::GridPlaceOrigin(), COMMON_TOOLS::GridPreset(), COMMON_TOOLS::GridPrev(), GROUP_TOOL::Group(), PCB_CONTROL::HighContrastModeCycle(), GERBVIEW_CONTROL::HighlightControl(), BOARD_INSPECTION_TOOL::HighlightItem(), SCH_EDITOR_CONTROL::HighlightNet(), BOARD_INSPECTION_TOOL::HighlightNet(), BOARD_INSPECTION_TOOL::highlightNet(), SCH_EDITOR_CONTROL::HighlightNetCursor(), PL_EDIT_TOOL::ImportDrawingSheetContent(), ImportFootprint(), SCH_DRAWING_TOOLS::ImportGraphics(), SYMBOL_EDITOR_DRAWING_TOOLS::ImportGraphics(), EE_TOOL_BASE< T >::Init(), SCH_EDIT_TOOL::Init(), SYMBOL_EDITOR_CONTROL::Init(), SYMBOL_EDITOR_EDIT_TOOL::Init(), PL_DRAWING_TOOLS::Init(), PL_EDIT_TOOL::Init(), PL_POINT_EDITOR::Init(), ROUTER_TOOL::Init(), BOARD_EDITOR_CONTROL::Init(), BOARD_INSPECTION_TOOL::Init(), BOARD_REANNOTATE_TOOL::Init(), CONVERT_TOOL::Init(), DRAWING_TOOL::Init(), EDIT_TOOL::Init(), GENERATOR_TOOL::Init(), GLOBAL_EDIT_TOOL::Init(), GROUP_TOOL::Init(), PAD_TOOL::Init(), PCB_EDIT_TABLE_TOOL::Init(), PCB_POINT_EDITOR::Init(), PCB_SELECTION_TOOL::Init(), ALIGN_DISTRIBUTE_TOOL::Init(), POSITION_RELATIVE_TOOL::Init(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), BOARD_INSPECTION_TOOL::InspectClearance(), BOARD_INSPECTION_TOOL::InspectConstraints(), BOARD_INSPECTION_TOOL::InspectDRCError(), EE_INSPECTION_TOOL::InspectERCError(), SCH_EDIT_TOOL::InteractiveDelete(), SYMBOL_EDITOR_EDIT_TOOL::InteractiveDelete(), PL_EDIT_TOOL::InteractiveDelete(), PCB_CONTROL::InteractiveDelete(), DRAWING_TOOL::InteractivePlaceWithPreview(), EDIT_TOOL::invokeInlineRouter(), EDIT_TOOL::isRouterActive(), TOOL_BASE::IsToolActive(), SCH_EDIT_TOOL::JustifyText(), EDIT_TOOL::JustifyText(), GROUP_TOOL::LeaveGroup(), BOARD_INSPECTION_TOOL::LocalRatsnestTool(), EDA_3D_CONTROLLER::Main(), CVPCB_CONTROL::Main(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::Main(), EE_POINT_EDITOR::Main(), EE_SELECTION_TOOL::Main(), SCH_MOVE_TOOL::Main(), SYMBOL_EDITOR_MOVE_TOOL::Main(), GERBVIEW_SELECTION_TOOL::Main(), PL_EDIT_TOOL::Main(), PL_SELECTION_TOOL::Main(), PCB_PICKER_TOOL::Main(), PCB_SELECTION_TOOL::Main(), ROUTER_TOOL::MainLoop(), PCB_VIEWER_TOOLS::MeasureTool(), SCH_EDIT_TOOL::Mirror(), SYMBOL_EDITOR_EDIT_TOOL::Mirror(), EDIT_TOOL::Mirror(), BOARD_EDITOR_CONTROL::modifyLockSelected(), EDIT_TOOL::Move(), EDIT_TOOL::MoveExact(), SCH_EDITOR_CONTROL::NextLineMode(), SYMBOL_EDITOR_CONTROL::OnDeMorgan(), SELECTION_TOOL::onDisambiguationExpire(), COMMON_TOOLS::OnGridChanged(), PCB_POINT_EDITOR::OnSelectionChange(), SCH_EDITOR_CONTROL::Paste(), SYMBOL_EDITOR_EDIT_TOOL::Paste(), PL_EDIT_TOOL::Paste(), PAD_TOOL::pastePadProperties(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), GROUP_TOOL::PickNewMember(), EDIT_TOOL::pickReferencePoint(), SYMBOL_EDITOR_EDIT_TOOL::PinTable(), PCB_CONTROL::placeBoardItems(), BOARD_EDITOR_CONTROL::PlaceFootprint(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), DRAWING_TOOL::PlaceReferenceImage(), SCH_DRAWING_TOOLS::PlaceSymbol(), DRAWING_TOOL::PlaceText(), DRAWING_TOOL::PlaceTuningPattern(), GERBVIEW_CONTROL::Print(), PCB_CONTROL::Print(), SCH_EDIT_TOOL::Properties(), SYMBOL_EDITOR_EDIT_TOOL::Properties(), EDIT_TOOL::Properties(), PAD_TOOL::pushPadSettings(), EDIT_TOOL::rebuildConnectivity(), ZONE_FILLER_TOOL::rebuildConnectivity(), EE_SELECTION_TOOL::RebuildSelection(), PAD_TOOL::RecombinePad(), SCH_EDITOR_CONTROL::Redo(), SYMBOL_EDITOR_EDIT_TOOL::Redo(), GENERATOR_TOOL::RegenerateSelected(), POSITION_RELATIVE_TOOL::RelativeItemSelectionMove(), EDIT_TOOL::Remove(), EE_POINT_EDITOR::removeCorner(), PCB_POINT_EDITOR::removeCorner(), GROUP_TOOL::RemoveFromGroup(), SELECTION_TOOL::RemoveItemFromSel(), SELECTION_TOOL::RemoveItemsFromSel(), SCH_EDIT_TOOL::RepeatDrawItem(), SYMBOL_EDITOR_DRAWING_TOOLS::RepeatDrawItem(), PCB_SELECTION_TOOL::RequestSelection(), EE_SELECTION_TOOL::RequestSelection(), EDA_3D_CONTROLLER::Reset(), COMMON_TOOLS::Reset(), PNS::TOOL_BASE::Reset(), GENERATOR_TOOL_PNS_PROXY::Reset(), COMMON_TOOLS::ResetLocalCoords(), TOOL_INTERACTIVE::resetTransitions(), SCH_EDITOR_CONTROL::Revert(), SCH_EDIT_TOOL::Rotate(), SYMBOL_EDITOR_EDIT_TOOL::Rotate(), EDIT_TOOL::Rotate(), ROUTER_TOOL::RouteSelected(), TOOL_INTERACTIVE::RunMainStack(), DRC_TOOL::RunTests(), EE_SELECTION_TOOL::Selectable(), EE_SELECTION_TOOL::SelectAll(), PCB_SELECTION_TOOL::SelectAll(), EE_SELECTION_TOOL::SelectColumns(), PCB_SELECTION_TOOL::SelectColumns(), EE_SELECTION_TOOL::SelectConnection(), PCB_TOOL_BASE::selection(), COMMON_TOOLS::SelectionTool(), GERBVIEW_SELECTION_TOOL::SelectItem(), GERBVIEW_SELECTION_TOOL::SelectItems(), EE_SELECTION_TOOL::selectMultiple(), PL_SELECTION_TOOL::selectMultiple(), PCB_SELECTION_TOOL::selectMultiple(), PCB_SELECTION_TOOL::selectNet(), GERBVIEW_SELECTION_TOOL::selectPoint(), PCB_TEST_SELECTION_TOOL::selectPoint(), PL_SELECTION_TOOL::SelectPoint(), PCB_SELECTION_TOOL::selectPoint(), EE_SELECTION_TOOL::selectPoint(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), EE_SELECTION_TOOL::SelectRows(), PCB_SELECTION_TOOL::SelectRows(), PCB_SELECTION_TOOL::selectSameSheet(), PCB_SELECTION_TOOL::selectSheetContents(), EE_SELECTION_TOOL::SelectTable(), PCB_SELECTION_TOOL::SelectTable(), PCB_SELECTION_TOOL::selectTableCells(), EE_SELECTION_TOOL::selectTableCells(), DRAWING_TOOL::SetAnchor(), SCH_EDIT_TOOL::SetAttribute(), TOOL_INTERACTIVE::SetContextMenu(), EDA_3D_CONTROLLER::SetMaterial(), DRC_TOOL::ShowDRCDialog(), BOARD_INSPECTION_TOOL::ShowFootprintLinks(), SCH_EDITOR_CONTROL::SimProbe(), SCH_EDITOR_CONTROL::SimTune(), SCH_DRAWING_TOOLS::SingleClickPlace(), PCB_CONTROL::SnapMode(), SCH_EDIT_TOOL::Swap(), EDIT_TOOL::Swap(), EE_SELECTION_TOOL::SyncSelection(), SCH_EDIT_TOOL::ToggleAttribute(), COMMON_TOOLS::ToggleCursor(), COMMON_TOOLS::ToggleCursorStyle(), EDA_3D_CONTROLLER::ToggleLayersManager(), EDA_3D_CONTROLLER::ToggleVisibility(), BOARD_EDITOR_CONTROL::TrackWidthDec(), BOARD_EDITOR_CONTROL::TrackWidthInc(), SCH_MOVE_TOOL::trimDanglingLines(), SCH_DRAWING_TOOLS::TwoClickPlace(), SYMBOL_EDITOR_DRAWING_TOOLS::TwoClickPlace(), SCH_EDITOR_CONTROL::Undo(), SYMBOL_EDITOR_EDIT_TOOL::Undo(), GROUP_TOOL::Ungroup(), PCB_SELECTION_TOOL::unrouteSelected(), EE_SELECTION_TOOL::UnselectAll(), PCB_SELECTION_TOOL::UnselectAll(), GERBVIEW_SELECTION_TOOL::UnselectItem(), GERBVIEW_SELECTION_TOOL::UnselectItems(), SCH_EDIT_TOOL::UnsetAttribute(), PNS::TOOL_BASE::updateEndItem(), PCB_POINT_EDITOR::updateItem(), BOARD_INSPECTION_TOOL::UpdateLocalRatsnest(), EE_INSPECTION_TOOL::UpdateMessagePanel(), GERBVIEW_CONTROL::UpdateMessagePanel(), PL_EDITOR_CONTROL::UpdateMessagePanel(), PCB_CONTROL::UpdateMessagePanel(), EDIT_TOOL::updateModificationPoint(), EE_POINT_EDITOR::updateParentItem(), PNS::TOOL_BASE::updateStartItem(), BOARD_EDITOR_CONTROL::ViaSizeDec(), BOARD_EDITOR_CONTROL::ViaSizeInc(), TOOL_INTERACTIVE::Wait(), BOARD_EDITOR_CONTROL::ZoneDuplicate(), ZONE_FILLER_TOOL::ZoneFill(), BOARD_EDITOR_CONTROL::ZoneMerge(), and ZONE_FILLER_TOOL::ZoneUnfill().

m_toolName

std::string TOOL_BASE::m_toolName

protectedinherited

Definition at line 215 of file tool_base.h.

Referenced by TOOL_BASE::GetName().

m_type

TOOL_TYPE TOOL_BASE::m_type

protectedinherited

Unique identifier for the tool, assigned by a TOOL_MANAGER instance.

Definition at line 208 of file tool_base.h.

Referenced by TOOL_BASE::GetType().

---

The documentation for this class was generated from the following files:

• footprint_editor_control.h
• pcbnew/dialogs/dialog_global_edit_text_and_graphics.cpp
• footprint_editor_control.cpp