TOOL_BASE Class Reference

Base abstract interface for all kinds of tools. More...

#include <tool_base.h>

Inheritance diagram for TOOL_BASE:

Public Types
enum	RESET_REASON {   RUN , MODEL_RELOAD , SUPERMODEL_RELOAD , GAL_SWITCH ,   REDRAW , SHUTDOWN }
	Determine the reason of reset for a tool. More...

Public Member Functions
	TOOL_BASE (TOOL_TYPE aType, TOOL_ID aId, const std::string &aName=std::string(""))
virtual	~TOOL_BASE ()
virtual bool	Init ()
	Init() is called once upon a registration of the tool.
virtual void	Reset (RESET_REASON aReason)=0
	Bring the tool to a known, initial state.
TOOL_TYPE	GetType () const
	Return the type of the tool.
TOOL_ID	GetId () const
	Return the unique identifier of the tool.
const std::string &	GetName () const
	Return the name of the tool.
TOOL_MANAGER *	GetManager () const
	Return the instance of TOOL_MANAGER that takes care of the tool.
bool	IsToolActive () const

Protected Member Functions
void	attachManager (TOOL_MANAGER *aManager)
	Set the TOOL_MANAGER the tool will belong to.
KIGFX::VIEW *	getView () const
	Returns the instance of #VIEW object used in the application.
KIGFX::VIEW_CONTROLS *	getViewControls () const
	Return the instance of VIEW_CONTROLS object used in the application.
template<typename T >
T *	getEditFrame () const
	Return the application window object, casted to requested user type.
template<typename T >
T *	getModel () const
	Return the model object if it matches the requested type.

Protected Attributes
TOOL_TYPE	m_type
TOOL_ID	m_toolId
	Unique id, assigned by a TOOL_MANAGER instance.
std::string	m_toolName
	Names are expected to obey the format application.ToolName (eg.
TOOL_MANAGER *	m_toolMgr

Private Member Functions
EDA_ITEM *	getModelInternal () const
TOOLS_HOLDER *	getToolHolderInternal () const

Friends
class	TOOL_MANAGER

Detailed Description

Base abstract interface for all kinds of tools.

Definition at line 65 of file tool_base.h.

Member Enumeration Documentation

RESET_REASON

enum TOOL_BASE::RESET_REASON

Determine the reason of reset for a tool.

Enumerator
RUN	Tool is invoked after being inactive.
MODEL_RELOAD	Model changes (the sheet for a schematic)
SUPERMODEL_RELOAD	For schematics, the entire schematic changed, not just the sheet.
GAL_SWITCH	Rendering engine changes.
REDRAW	Full drawing refresh.
SHUTDOWN	Tool is being shut down.

Definition at line 77 of file tool_base.h.

Constructor & Destructor Documentation

TOOL_BASE()

TOOL_BASE::TOOL_BASE ( TOOL_TYPE  aType, TOOL_ID  aId, const std::string &  aName = std::string( "" )  )

inline

Definition at line 68 of file tool_base.h.

~TOOL_BASE()

virtual TOOL_BASE::~TOOL_BASE ( )

inlinevirtual

Reimplemented in PNS::TOOL_BASE.

Definition at line 74 of file tool_base.h.

Member Function Documentation

attachManager()

void TOOL_BASE::attachManager ( TOOL_MANAGER *  aManager )

protected

Set the TOOL_MANAGER the tool will belong to.

Called by TOOL_MANAGER::RegisterTool()

Definition at line 62 of file tool_base.cpp.

References m_toolMgr.

Referenced by TOOL_MANAGER::RegisterTool().

getEditFrame()

template<typename T >

T * TOOL_BASE::getEditFrame ( ) const

inlineprotected

Return the application window object, casted to requested user type.

Definition at line 186 of file tool_base.h.

References getToolHolderInternal(), and T.

Referenced by ZONE_CREATE_HELPER::createNewZone(), and ZONE_CREATE_HELPER::setUniquePriority().

GetId()

TOOL_ID TOOL_BASE::GetId ( ) const

inline

Return the unique identifier of the tool.

The identifier is set by an instance of TOOL_MANAGER.

Returns

Identifier of the tool.

Definition at line 123 of file tool_base.h.

References m_toolId.

Referenced by TOOL_MANAGER::finishTool(), TOOL_MANAGER::InitTools(), TOOL_MANAGER::isActive(), TOOL_MANAGER::RegisterTool(), ACTION_MANAGER::RunHotKey(), TOOL_MANAGER::runTool(), TOOL_MANAGER::saveViewControls(), and TOOL_MANAGER::ShutdownTool().

GetManager()

TOOL_MANAGER * TOOL_BASE::GetManager ( ) const

inline

Return the instance of TOOL_MANAGER that takes care of the tool.

Returns

Instance of the TOOL_MANAGER or NULL if there is no associated tool manager.

Definition at line 146 of file tool_base.h.

References m_toolMgr.

Referenced by MULTICHANNEL_TOOL::AutogenerateRuleAreas(), ZONE_CREATE_HELPER::commitZone(), ZONE_CREATE_HELPER::createNewZone(), PNS_KICAD_IFACE::DisplayItem(), PCB_TOOL_BASE::doInteractiveItemPlacement(), PCB_TUNING_PATTERN::EditPush(), PCB_TUNING_PATTERN::EditRevert(), PCB_TUNING_PATTERN::EditStart(), ACTION_MENU::getToolManager(), PNS_KICAD_IFACE::GetUnits(), makeShapeModificationMenu(), ZONE_CREATE_HELPER::OnFirstPoint(), ZONE_CREATE_HELPER::performZoneCutout(), PAD_TOOL::PlacePad(), MULTICHANNEL_TOOL::RepeatLayout(), SCH_COMMIT::SCH_COMMIT(), PCB_TUNING_PATTERN::Update(), and GLOBAL_EDIT_TOOL::ZonesManager().

getModel()

template<typename T >

T * TOOL_BASE::getModel ( ) const

inlineprotected

Return the model object if it matches the requested type.

Definition at line 198 of file tool_base.h.

References getModelInternal(), and T.

Referenced by ZONE_CREATE_HELPER::commitZone(), and ZONE_CREATE_HELPER::createZoneFromExisting().

getModelInternal()

EDA_ITEM * TOOL_BASE::getModelInternal ( ) const

private

Definition at line 56 of file tool_base.cpp.

References TOOL_MANAGER::GetModel(), and m_toolMgr.

Referenced by getModel().

GetName()

const std::string & TOOL_BASE::GetName ( ) const

inline

Return the name of the tool.

Tool names are expected to obey the format: application.ToolName (eg. pcbnew.InteractiveSelection).

Returns

The name of the tool.

Definition at line 136 of file tool_base.h.

References m_toolName.

Referenced by PCB_CONTROL::AppendBoard(), TOOL_MANAGER::dispatchInternal(), TOOL_INTERACTIVE::goInternal(), COMMON_TOOLS::GridProperties(), SCH_DRAWING_TOOLS::ImportSheet(), TOOL_MANAGER::InitTools(), TOOL_MANAGER::invokeTool(), TOOL_MANAGER::RegisterTool(), TOOL_MANAGER::ResetTools(), TOOL_MANAGER::runTool(), and TOOL_MANAGER::ShutdownTool().

getToolHolderInternal()

TOOLS_HOLDER * TOOL_BASE::getToolHolderInternal ( ) const

private

Definition at line 50 of file tool_base.cpp.

References TOOL_MANAGER::GetToolHolder(), and m_toolMgr.

Referenced by getEditFrame().

GetType()

TOOL_TYPE TOOL_BASE::GetType ( ) const

inline

Return the type of the tool.

Returns

The type of the tool.

Definition at line 111 of file tool_base.h.

References m_type.

Referenced by TOOL_MANAGER::InvokeTool(), TOOL_MANAGER::ResetTools(), TOOL_MANAGER::runTool(), and TOOL_MANAGER::ShutdownTool().

getView()

KIGFX::VIEW * TOOL_BASE::getView ( ) const

protected

Returns the instance of #VIEW object used in the application.

It allows tools to draw.

Returns

The instance of VIEW.

Definition at line 38 of file tool_base.cpp.

References TOOL_MANAGER::GetView(), and m_toolMgr.

Referenced by SCH_POINT_EDITOR::addCornerCondition(), ALIGN_DISTRIBUTE_TOOL::AlignLeft(), ALIGN_DISTRIBUTE_TOOL::AlignRight(), SCH_INSPECTION_TOOL::CheckSymbol(), GERBVIEW_CONTROL::ClearAllLayers(), PL_SELECTION_TOOL::ClearSelection(), SCH_SELECTION_TOOL::ClearSelection(), SCH_SELECTION_TOOL::CollectHits(), SCH_LINE_WIRE_BUS_TOOL::computeBreakPoint(), COMMON_TOOLS::CursorControl(), EDIT_TOOL::DeleteItems(), COMMON_TOOLS::doCenter(), PL_EDIT_TOOL::DoDelete(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), SYMBOL_EDITOR_DRAWING_TOOLS::doDrawShape(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), SYMBOL_EDITOR_MOVE_TOOL::doMoveSelection(), SCH_MOVE_TOOL::doMoveSelection(), SELECTION_TOOL::doSelectionMenu(), COMMON_TOOLS::doZoomFit(), COMMON_TOOLS::doZoomInOut(), COMMON_TOOLS::doZoomToPreset(), EDIT_TOOL::DragArcTrack(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawOneBezier(), SCH_DRAWING_TOOLS::DrawRuleArea(), SCH_LINE_WIRE_BUS_TOOL::DrawSegments(), SCH_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), DRAWING_TOOL::drawShape(), SCH_DRAWING_TOOLS::DrawSheet(), SCH_DRAWING_TOOLS::DrawTable(), DRAWING_TOOL::DrawTable(), DRAWING_TOOL::DrawZone(), BOARD_EDITOR_CONTROL::DrillOrigin(), SCH_SELECTION_TOOL::EnterGroup(), PAD_TOOL::EnumeratePads(), SCH_SELECTION_TOOL::ExitGroup(), PCB_SELECTION_TOOL::FilterCollectorForFootprints(), SCH_SELECTION_TOOL::GetNode(), ROUTER_TOOL::getStartLayer(), PCB_CONTROL::GridPlaceOrigin(), PCB_CONTROL::GridResetOrigin(), PCB_SELECTION_TOOL::GuessSelectionCandidates(), SCH_SELECTION_TOOL::GuessSelectionCandidates(), ROUTER_TOOL::handleCommonEvents(), PL_SELECTION_TOOL::highlight(), PCB_SELECTION_TOOL::highlight(), SCH_SELECTION_TOOL::highlight(), GERBVIEW_CONTROL::HighlightControl(), BOARD_INSPECTION_TOOL::highlightNet(), PNS::TOOL_BASE::highlightNets(), PCB_SELECTION_TOOL::hitTestDistance(), SCH_DRAWING_TOOLS::ImportGraphics(), SYMBOL_EDITOR_DRAWING_TOOLS::ImportGraphics(), SCH_DRAWING_TOOLS::ImportSheet(), EDIT_TOOL::Init(), ROUTER_TOOL::InlineDrag(), SCH_EDIT_TOOL::InteractiveDelete(), PL_EDIT_TOOL::InteractiveDelete(), PCB_CONTROL::InteractiveDelete(), SCH_POINT_EDITOR::Main(), PL_POINT_EDITOR::Main(), PCB_PICKER_TOOL::Main(), GERBVIEW_INSPECTION_TOOL::MeasureTool(), PCB_VIEWER_TOOLS::MeasureTool(), SCH_EDIT_TOOL::Mirror(), EDIT_TOOL::MoveExact(), PL_EDIT_TOOL::moveItem(), COMMON_TOOLS::OnGridChanged(), PCB_POINT_EDITOR::OnSelectionChange(), COMMON_TOOLS::PanControl(), SCH_EDITOR_CONTROL::Paste(), SYMBOL_EDITOR_EDIT_TOOL::Paste(), PL_EDIT_TOOL::Paste(), ROUTER_TOOL::performRouting(), PNS::TOOL_BASE::pickSingleItem(), BOARD_EDITOR_CONTROL::PlaceFootprint(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), DRAWING_TOOL::PlaceReferenceImage(), SCH_DRAWING_TOOLS::PlaceSymbol(), DRAWING_TOOL::PlaceText(), DRAWING_TOOL::PlaceTuningPattern(), POSITION_RELATIVE_TOOL::PositionRelativeInteractively(), ROUTER_TOOL::prepareInteractive(), SCH_EDIT_TOOL::Properties(), EDIT_TOOL::Properties(), PCB_SELECTION_TOOL::pruneObscuredSelectionCandidates(), SCH_SELECTION_TOOL::Reset(), SCH_TOOL_BASE< T >::Reset(), GERBVIEW_SELECTION_TOOL::Reset(), PNS::TOOL_BASE::Reset(), BOARD_EDITOR_CONTROL::Reset(), DRAWING_TOOL::Reset(), GENERATOR_TOOL_PNS_PROXY::Reset(), PCB_CONTROL::Reset(), PCB_SELECTION_TOOL::Reset(), SCH_EDIT_TOOL::Rotate(), GERBVIEW_SELECTION_TOOL::select(), PCB_SELECTION_TOOL::Selectable(), SCH_SELECTION_TOOL::SelectAll(), PCB_SELECTION_TOOL::SelectAll(), SCH_SELECTION_TOOL::selectionContains(), PL_SELECTION_TOOL::selectionContains(), PCB_SELECTION_TOOL::selectionContains(), SCH_SELECTION_TOOL::selectMultiple(), PL_SELECTION_TOOL::selectMultiple(), PCB_SELECTION_TOOL::SelectMultiple(), PL_SELECTION_TOOL::SelectPoint(), SCH_SELECTION_TOOL::selectPoint(), PCB_SELECTION_TOOL::SelectPolyArea(), PCB_SELECTION_TOOL::SelectRectArea(), ZOOM_TOOL::selectRegion(), GERBVIEW_SELECTION_TOOL::selectVisually(), DRAWING_TOOL::SetAnchor(), SCH_EDITOR_CONTROL::SimProbe(), SCH_EDITOR_CONTROL::SimTune(), SCH_DRAWING_TOOLS::SingleClickPlace(), SCH_EDITOR_CONTROL::ToggleDirectiveLabels(), SCH_EDITOR_CONTROL::ToggleERCErrors(), SCH_EDITOR_CONTROL::ToggleERCWarnings(), SCH_EDITOR_CONTROL::ToggleHiddenFields(), SYMBOL_EDITOR_CONTROL::ToggleHiddenFields(), SCH_EDITOR_CONTROL::ToggleHiddenPins(), SYMBOL_EDITOR_CONTROL::ToggleHiddenPins(), SCH_EDITOR_CONTROL::ToggleOPCurrents(), SCH_EDITOR_CONTROL::ToggleOPVoltages(), SCH_EDITOR_CONTROL::TogglePinAltIcons(), SYMBOL_EDITOR_CONTROL::TogglePinAltIcons(), SCH_DRAWING_TOOLS::TwoClickPlace(), SYMBOL_EDITOR_DRAWING_TOOLS::TwoClickPlace(), PL_SELECTION_TOOL::unhighlight(), PCB_SELECTION_TOOL::unhighlight(), PCB_TEST_SELECTION_TOOL::unhighlight(), SCH_SELECTION_TOOL::unhighlight(), GERBVIEW_SELECTION_TOOL::unselect(), SCH_SELECTION_TOOL::UnselectAll(), PCB_SELECTION_TOOL::UnselectAll(), GERBVIEW_SELECTION_TOOL::unselectVisually(), SCH_POINT_EDITOR::updateEditedPoint(), PL_POINT_EDITOR::updateEditedPoint(), PCB_POINT_EDITOR::updateEditedPoint(), SCH_FIND_REPLACE_TOOL::UpdateFind(), PL_POINT_EDITOR::updateItem(), PCB_POINT_EDITOR::updateItem(), SCH_EDITOR_CONTROL::UpdateNetHighlighting(), SCH_POINT_EDITOR::updatePoints(), PL_POINT_EDITOR::updatePoints(), PCB_POINT_EDITOR::updatePoints(), SCH_SELECTION_TOOL::updateSelection(), PCB_SELECTION_TOOL::updateSelection(), PNS::TOOL_BASE::updateStartItem(), PCB_SELECTION_TOOL::view(), PCB_TOOL_BASE::view(), PCB_VIEWER_TOOLS::view(), PCB_TEST_SELECTION_TOOL::view(), SCH_SELECTION_TOOL::ZoomFitCrossProbeBBox(), PCB_SELECTION_TOOL::ZoomFitCrossProbeBBox(), PCB_SELECTION_TOOL::zoomFitSelection(), GERBVIEW_SELECTION_TOOL::~GERBVIEW_SELECTION_TOOL(), PCB_SELECTION_TOOL::~PCB_SELECTION_TOOL(), and SCH_SELECTION_TOOL::~SCH_SELECTION_TOOL().

getViewControls()

KIGFX::VIEW_CONTROLS * TOOL_BASE::getViewControls ( ) const

protected

Return the instance of VIEW_CONTROLS object used in the application.

It allows tools to read & modify user input and its settings (eg. show cursor, enable snapping to grid, etc.).

Returns

The instance of VIEW_CONTROLS.

Definition at line 44 of file tool_base.cpp.

References TOOL_MANAGER::GetViewControls(), and m_toolMgr.

Referenced by SCH_POINT_EDITOR::addCorner(), PCB_POINT_EDITOR::addCorner(), SCH_POINT_EDITOR::addCornerCondition(), SCH_SELECTION_TOOL::autostartEvent(), SCH_EDIT_TOOL::BreakWire(), PCB_POINT_EDITOR::chamferCorner(), PCB_SELECTION_TOOL::controls(), PCB_TOOL_BASE::controls(), PCB_TEST_SELECTION_TOOL::controls(), EDIT_TOOL::copyToClipboard(), COMMON_TOOLS::CursorControl(), EDIT_TOOL::DeleteItems(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), SYMBOL_EDITOR_DRAWING_TOOLS::doDrawShape(), EDIT_TOOL::doMoveSelection(), SYMBOL_EDITOR_MOVE_TOOL::doMoveSelection(), SCH_MOVE_TOOL::doMoveSelection(), SCH_LINE_WIRE_BUS_TOOL::doUnfoldBus(), COMMON_TOOLS::doZoomToPreset(), EDIT_TOOL::DragArcTrack(), DRAWING_TOOL::DrawCircle(), DRAWING_TOOL::DrawLine(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::DrawRectangle(), SCH_DRAWING_TOOLS::DrawRuleArea(), SCH_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), DRAWING_TOOL::drawShape(), SCH_DRAWING_TOOLS::DrawSheet(), SCH_DRAWING_TOOLS::DrawTable(), DRAWING_TOOL::DrawTable(), DRAWING_TOOL::DrawZone(), PAD_TOOL::EnumeratePads(), SCH_LINE_WIRE_BUS_TOOL::finishSegments(), SCH_EDITOR_CONTROL::HighlightNet(), BOARD_INSPECTION_TOOL::HighlightNet(), FOOTPRINT_EDITOR_CONTROL::ImportFootprint(), SCH_DRAWING_TOOLS::ImportGraphics(), SYMBOL_EDITOR_DRAWING_TOOLS::ImportGraphics(), SCH_DRAWING_TOOLS::ImportSheet(), SYMBOL_EDITOR_EDIT_TOOL::Increment(), EDIT_TOOL::Init(), SCH_POINT_EDITOR::Main(), SCH_SELECTION_TOOL::Main(), PICKER_TOOL::Main(), PL_EDIT_TOOL::Main(), PL_POINT_EDITOR::Main(), PCB_PICKER_TOOL::Main(), ROUTER_TOOL::MainLoop(), PCB_POINT_EDITOR::makePoints(), SCH_POINT_EDITOR::makePointsAndBehavior(), GERBVIEW_INSPECTION_TOOL::MeasureTool(), PCB_VIEWER_TOOLS::MeasureTool(), COMMON_TOOLS::OnGridChanged(), PCB_POINT_EDITOR::OnSelectionChange(), SCH_EDITOR_CONTROL::Paste(), SYMBOL_EDITOR_EDIT_TOOL::Paste(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), SYMBOL_EDITOR_DRAWING_TOOLS::PlaceAnchor(), PCB_CONTROL::placeBoardItems(), BOARD_EDITOR_CONTROL::PlaceFootprint(), SCH_DRAWING_TOOLS::PlaceImage(), PL_DRAWING_TOOLS::PlaceItem(), DRAWING_TOOL::PlaceReferenceImage(), SCH_DRAWING_TOOLS::PlaceSymbol(), DRAWING_TOOL::PlaceTuningPattern(), POSITION_RELATIVE_TOOL::PositionRelativeInteractively(), SCH_EDIT_TOOL::Properties(), EDIT_TOOL::Properties(), SCH_EDIT_TOOL::RepeatDrawItem(), PL_SELECTION_TOOL::RequestSelection(), SCH_SELECTION_TOOL::RequestSelection(), DRAWING_TOOL::Reset(), PCB_POINT_EDITOR::Reset(), COMMON_TOOLS::ResetLocalCoords(), ROUTER_TOOL::RouteSelected(), PCB_SELECTION_TOOL::selectCursor(), SCH_SELECTION_TOOL::selectMultiple(), PL_SELECTION_TOOL::selectMultiple(), SCH_SELECTION_TOOL::SelectNode(), PCB_SELECTION_TOOL::SelectPolyArea(), PCB_SELECTION_TOOL::SelectRectArea(), ZOOM_TOOL::selectRegion(), PCB_SELECTION_TOOL::selectTableCells(), SCH_SELECTION_TOOL::selectTableCells(), ALIGN_DISTRIBUTE_TOOL::selectTarget(), PICKER_TOOL::setControls(), PCB_PICKER_TOOL::setControls(), SCH_POINT_EDITOR::setEditedPoint(), PL_POINT_EDITOR::setEditedPoint(), PCB_POINT_EDITOR::setEditedPoint(), SCH_DRAWING_TOOLS::SingleClickPlace(), SCH_DRAWING_TOOLS::SyncSheetsPins(), SCH_DRAWING_TOOLS::TwoClickPlace(), SYMBOL_EDITOR_DRAWING_TOOLS::TwoClickPlace(), SCH_POINT_EDITOR::updateEditedPoint(), PL_POINT_EDITOR::updateEditedPoint(), PCB_POINT_EDITOR::updateEditedPoint(), PL_EDIT_TOOL::updateModificationPoint(), and COMMON_TOOLS::ZoomCenter().

Init()

virtual bool TOOL_BASE::Init ( )

inlinevirtual

Init() is called once upon a registration of the tool.

Returns

True if the initialization went fine, false - otherwise.

Reimplemented in EDA_3D_CONTROLLER, BITMAP2CMP_CONTROL, GROUP_TOOL, CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL, SCH_DESIGN_BLOCK_CONTROL, SCH_DRAWING_TOOLS, SCH_EDIT_TABLE_TOOL, SCH_EDIT_TOOL, SCH_INSPECTION_TOOL, SCH_LINE_WIRE_BUS_TOOL, SCH_MOVE_TOOL, SCH_POINT_EDITOR, SCH_SELECTION_TOOL, SCH_TOOL_BASE< T >, SCH_TOOL_BASE< SCH_EDIT_FRAME >, SCH_TOOL_BASE< SCH_BASE_FRAME >, SCH_TOOL_BASE< SYMBOL_EDIT_FRAME >, SIMULATOR_CONTROL, SYMBOL_EDITOR_CONTROL, SYMBOL_EDITOR_DRAWING_TOOLS, SYMBOL_EDITOR_EDIT_TOOL, SYMBOL_EDITOR_MOVE_TOOL, SYMBOL_EDITOR_PIN_TOOL, GERBVIEW_INSPECTION_TOOL, GERBVIEW_SELECTION_TOOL, EMBED_TOOL, PICKER_TOOL, ZOOM_TOOL, PL_DRAWING_TOOLS, PL_EDIT_TOOL, PL_EDITOR_CONTROL, PL_POINT_EDITOR, PL_SELECTION_TOOL, PCB_CALCULATOR_CONTROL, SCRIPTING_TOOL, ROUTER_TOOL, ALIGN_DISTRIBUTE_TOOL, ARRAY_TOOL, BOARD_EDITOR_CONTROL, BOARD_INSPECTION_TOOL, BOARD_REANNOTATE_TOOL, CONVERT_TOOL, DRAWING_TOOL, EDIT_TOOL, FOOTPRINT_CHOOSER_SELECTION_TOOL, FOOTPRINT_EDITOR_CONTROL, FOOTPRINT_WIZARD_TOOLS, GENERATOR_TOOL, GLOBAL_EDIT_TOOL, PAD_TOOL, PCB_DESIGN_BLOCK_CONTROL, PCB_EDIT_TABLE_TOOL, PCB_PICKER_TOOL, PCB_POINT_EDITOR, PCB_SELECTION_TOOL, PCB_TOOL_BASE, PCB_VIEWER_TOOLS, POSITION_RELATIVE_TOOL, and PCB_TEST_SELECTION_TOOL.

Definition at line 92 of file tool_base.h.

Referenced by TOOL_MANAGER::InitTools().

IsToolActive()

bool TOOL_BASE::IsToolActive

(

)

const

Definition at line 32 of file tool_base.cpp.

References TOOL_MANAGER::IsToolActive(), m_toolId, and m_toolMgr.

Referenced by EDIT_TOOL::ChangeTrackLayer(), EDIT_TOOL::Drag(), ROUTER_TOOL::handleLayerSwitch(), EDIT_TOOL::invokeInlineRouter(), PCB_SELECTION_TOOL::Main(), BOARD_EDITOR_CONTROL::TrackWidthDec(), and BOARD_EDITOR_CONTROL::TrackWidthInc().

Reset()

virtual void TOOL_BASE::Reset ( RESET_REASON  aReason )

pure virtual

Bring the tool to a known, initial state.

If the tool claimed anything from the model or the view, it must release it when its reset.

Parameters

aReason

contains information about the reason of tool reset.

Implemented in EDA_3D_CONTROLLER, BITMAP2CMP_CONTROL, DESIGN_BLOCK_CONTROL, GROUP_TOOL, LIBRARY_EDITOR_CONTROL, CVPCB_ASSOCIATION_TOOL, CVPCB_CONTROL, CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL, SCH_INSPECTION_TOOL, SCH_POINT_EDITOR, SCH_SELECTION_TOOL, SCH_TOOL_BASE< T >, SCH_TOOL_BASE< SCH_EDIT_FRAME >, SCH_TOOL_BASE< SCH_BASE_FRAME >, SCH_TOOL_BASE< SYMBOL_EDIT_FRAME >, SIMULATOR_CONTROL, SYMBOL_EDITOR_MOVE_TOOL, GERBVIEW_CONTROL, GERBVIEW_INSPECTION_TOOL, GERBVIEW_SELECTION_TOOL, COMMON_CONTROL, COMMON_TOOLS, EMBED_TOOL, PICKER_TOOL, PROPERTIES_TOOL, ZOOM_TOOL, KICAD_MANAGER_CONTROL, PL_DRAWING_TOOLS, PL_EDIT_TOOL, PL_EDITOR_CONTROL, PL_POINT_EDITOR, PL_SELECTION_TOOL, PCB_CALCULATOR_CONTROL, MICROWAVE_TOOL, SCRIPTING_TOOL, PNS::TOOL_BASE, ROUTER_TOOL, ALIGN_DISTRIBUTE_TOOL, ARRAY_TOOL, BOARD_EDITOR_CONTROL, BOARD_INSPECTION_TOOL, BOARD_REANNOTATE_TOOL, CONVERT_TOOL, DRAWING_TOOL, DRC_TOOL, EDIT_TOOL, FOOTPRINT_CHOOSER_SELECTION_TOOL, FOOTPRINT_EDITOR_CONTROL, FOOTPRINT_WIZARD_TOOLS, GENERATOR_TOOL, GENERATOR_TOOL_PNS_PROXY, GLOBAL_EDIT_TOOL, PAD_TOOL, PCB_CONTROL, PCB_POINT_EDITOR, PCB_SELECTION_TOOL, PCB_TOOL_BASE, PCB_VIEWER_TOOLS, POSITION_RELATIVE_TOOL, ZONE_FILLER_TOOL, KI_TEST::DUMMY_TOOL, and PCB_TEST_SELECTION_TOOL.

Referenced by ROUTER_TOOL::Reset(), TOOL_MANAGER::ResetTools(), and TOOL_MANAGER::runTool().

Friends And Related Function Documentation

TOOL_MANAGER

friend class TOOL_MANAGER

friend

Definition at line 156 of file tool_base.h.

Member Data Documentation

m_toolId

TOOL_ID TOOL_BASE::m_toolId

protected

Unique id, assigned by a TOOL_MANAGER instance.

Definition at line 215 of file tool_base.h.

Referenced by TOOL_INTERACTIVE::Activate(), GetId(), and IsToolActive().

m_toolMgr

TOOL_MANAGER* TOOL_BASE::m_toolMgr

protected

Definition at line 220 of file tool_base.h.

Referenced by TOOL_INTERACTIVE::Activate(), SCH_POINT_EDITOR::addCorner(), SELECTION_TOOL::AddItemsToSel(), SELECTION_TOOL::AddItemToSel(), GROUP_TOOL::AddToGroup(), SYMBOL_EDITOR_MOVE_TOOL::AlignElements(), SCH_MOVE_TOOL::AlignToGrid(), PCB_CONTROL::AppendBoard(), SCH_EDITOR_CONTROL::AssignNetclass(), BOARD_EDITOR_CONTROL::AssignNetclass(), CVPCB_ASSOCIATION_TOOL::Associate(), attachManager(), SCH_DRAWING_TOOLS::AutoPlaceAllSheetPins(), SCH_EDIT_TOOL::AutoplaceFields(), SCH_SELECTION_TOOL::autostartEvent(), SCH_EDIT_TOOL::BreakWire(), BOARD_INSPECTION_TOOL::calculateSelectionRatsnest(), ROUTER_TOOL::CanInlineDrag(), SCH_EDIT_TOOL::ChangeBodyStyle(), SCH_EDITOR_CONTROL::ChangeLineMode(), SCH_EDIT_TOOL::ChangeSymbols(), SCH_EDIT_TOOL::ChangeTextType(), EDIT_TOOL::ChangeTrackLayer(), EDIT_TOOL::ChangeTrackWidth(), SCH_EDIT_TOOL::CleanupSheetPins(), GERBVIEW_CONTROL::ClearAllLayers(), SCH_EDITOR_CONTROL::ClearHighlight(), BOARD_INSPECTION_TOOL::ClearHighlight(), GERBVIEW_SELECTION_TOOL::clearSelection(), PL_SELECTION_TOOL::ClearSelection(), SCH_EDIT_TABLE_TOOL::clearSelection(), PCB_EDIT_TABLE_TOOL::clearSelection(), SCH_SELECTION_TOOL::ClearSelection(), PCB_SELECTION_TOOL::ClearSelection(), SCH_EDITOR_CONTROL::CopyAsText(), SYMBOL_EDITOR_EDIT_TOOL::CopyAsText(), PAD_TOOL::copyPadSettings(), EDIT_TOOL::copyToClipboard(), ARRAY_TOOL::CreateArray(), SCH_GROUP_TOOL::createCommit(), SYMBOL_EDITOR_PIN_TOOL::CreateImagePins(), MICROWAVE_TOOL::createInductorBetween(), SCH_INSPECTION_TOOL::CrossProbe(), DRC_TOOL::CrossProbe(), COMMON_TOOLS::CursorControl(), SCH_EDITOR_CONTROL::Cut(), PCB_CONTROL::CycleLayerPresets(), SCH_EDIT_TOOL::DdAppendFile(), EDIT_TOOL::DeleteItems(), BOARD_INSPECTION_TOOL::DiffFootprint(), SCH_EDITOR_CONTROL::doCopy(), BOARD_EDITOR_CONTROL::doCrossProbePcbToSch(), SCH_EDITOR_CONTROL::doCrossProbeSchToPcb(), SCH_EDIT_TOOL::DoDelete(), SYMBOL_EDITOR_EDIT_TOOL::DoDelete(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), SYMBOL_EDITOR_DRAWING_TOOLS::doDrawShape(), BOARD_INSPECTION_TOOL::doHideRatsnestNet(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), SYMBOL_EDITOR_MOVE_TOOL::doMoveSelection(), SCH_MOVE_TOOL::doMoveSelection(), PCB_SELECTION_TOOL::doSyncSelection(), SCH_DRAWING_TOOLS::doSyncSheetsPins(), SCH_LINE_WIRE_BUS_TOOL::doUnfoldBus(), COMMON_TOOLS::doZoomInOut(), COMMON_TOOLS::doZoomToPreset(), EDIT_TOOL::Drag(), DRAWING_TOOL::DrawArc(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawCircle(), DRAWING_TOOL::DrawDimension(), DRAWING_TOOL::drawOneBezier(), DRAWING_TOOL::DrawRectangle(), SCH_DRAWING_TOOLS::DrawRuleArea(), SCH_LINE_WIRE_BUS_TOOL::DrawSegments(), SCH_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), DRAWING_TOOL::drawShape(), SCH_DRAWING_TOOLS::DrawSheet(), SCH_DRAWING_TOOLS::DrawTable(), DRAWING_TOOL::DrawTable(), DRAWING_TOOL::DrawZone(), BOARD_EDITOR_CONTROL::DrillOrigin(), SYMBOL_EDITOR_EDIT_TOOL::Duplicate(), EDIT_TOOL::Duplicate(), SCH_EDIT_TOOL::EditField(), SYMBOL_EDITOR_EDIT_TOOL::editFieldProperties(), SCH_EDIT_TOOL::editFieldText(), BOARD_EDITOR_CONTROL::EditFpInFpEditor(), PAD_TOOL::EditPad(), SCH_EDIT_TOOL::EditPageNumber(), SYMBOL_EDITOR_EDIT_TOOL::editShapeProperties(), SYMBOL_EDITOR_EDIT_TOOL::editSymbolProperties(), SCH_EDIT_TABLE_TOOL::EditTable(), PCB_EDIT_TABLE_TOOL::EditTable(), SCH_EDITOR_CONTROL::EditWithSymbolEditor(), SCH_SELECTION_TOOL::EnterGroup(), PCB_SELECTION_TOOL::EnterGroup(), SCH_NAVIGATE_TOOL::EnterSheet(), PAD_TOOL::EnumeratePads(), SCH_INSPECTION_TOOL::ExcludeMarker(), KICAD_MANAGER_CONTROL::Execute(), SCH_SELECTION_TOOL::ExitGroup(), PCB_SELECTION_TOOL::ExitGroup(), PCB_SELECTION_TOOL::expandConnection(), EDA_3D_CONTROLLER::ExportImage(), ZONE_FILLER_TOOL::FillAllZones(), PCB_SELECTION_TOOL::filterSelection(), PCB_SELECTION_TOOL::FindItem(), SCH_EDITOR_CONTROL::FindSymbolAndItem(), SCH_LINE_WIRE_BUS_TOOL::finishSegments(), EDIT_TOOL::Flip(), EDIT_TOOL::GetAndPlace(), GetManager(), getModelInternal(), DRAWING_TOOL::getSourceZoneForAction(), PCB_EDIT_TABLE_TOOL::getTableCellSelection(), getToolHolderInternal(), SCH_EDIT_TABLE_TOOL::getToolMgr(), PCB_EDIT_TABLE_TOOL::getToolMgr(), getView(), getViewControls(), TOOL_INTERACTIVE::goInternal(), PCB_SELECTION_TOOL::grabUnconnected(), COMMON_TOOLS::GridFast1(), COMMON_TOOLS::GridFast2(), COMMON_TOOLS::GridFastCycle(), SCH_EDITOR_CONTROL::GridFeedback(), COMMON_TOOLS::GridNext(), COMMON_TOOLS::GridOrigin(), PCB_CONTROL::GridPlaceOrigin(), COMMON_TOOLS::GridPreset(), COMMON_TOOLS::GridPrev(), SCH_GROUP_TOOL::Group(), PCB_GROUP_TOOL::Group(), PCB_CONTROL::HighContrastModeCycle(), GERBVIEW_CONTROL::HighlightControl(), BOARD_INSPECTION_TOOL::HighlightItem(), SCH_EDITOR_CONTROL::HighlightNet(), BOARD_INSPECTION_TOOL::HighlightNet(), BOARD_INSPECTION_TOOL::highlightNet(), SCH_EDITOR_CONTROL::HighlightNetCursor(), PL_EDIT_TOOL::ImportDrawingSheetContent(), FOOTPRINT_EDITOR_CONTROL::ImportFootprint(), SCH_DRAWING_TOOLS::ImportGraphics(), SYMBOL_EDITOR_DRAWING_TOOLS::ImportGraphics(), SCH_DRAWING_TOOLS::ImportSheet(), SCH_EDIT_TOOL::Increment(), SYMBOL_EDITOR_EDIT_TOOL::Increment(), EDIT_TOOL::Increment(), GROUP_TOOL::Init(), SCH_EDIT_TOOL::Init(), SCH_TOOL_BASE< T >::Init(), SYMBOL_EDITOR_CONTROL::Init(), SYMBOL_EDITOR_EDIT_TOOL::Init(), PL_DRAWING_TOOLS::Init(), PL_EDIT_TOOL::Init(), PL_POINT_EDITOR::Init(), ROUTER_TOOL::Init(), ALIGN_DISTRIBUTE_TOOL::Init(), BOARD_EDITOR_CONTROL::Init(), BOARD_INSPECTION_TOOL::Init(), BOARD_REANNOTATE_TOOL::Init(), CONVERT_TOOL::Init(), DRAWING_TOOL::Init(), EDIT_TOOL::Init(), FOOTPRINT_CHOOSER_SELECTION_TOOL::Init(), FOOTPRINT_EDITOR_CONTROL::Init(), GENERATOR_TOOL::Init(), GLOBAL_EDIT_TOOL::Init(), PAD_TOOL::Init(), PCB_EDIT_TABLE_TOOL::Init(), PCB_POINT_EDITOR::Init(), PCB_SELECTION_TOOL::Init(), POSITION_RELATIVE_TOOL::Init(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), BOARD_INSPECTION_TOOL::InspectClearance(), BOARD_INSPECTION_TOOL::InspectConstraints(), BOARD_INSPECTION_TOOL::InspectDRCError(), SCH_INSPECTION_TOOL::InspectERCError(), SCH_EDIT_TOOL::InteractiveDelete(), SYMBOL_EDITOR_EDIT_TOOL::InteractiveDelete(), PL_EDIT_TOOL::InteractiveDelete(), PCB_CONTROL::InteractiveDelete(), EDIT_TOOL::invokeInlineRouter(), EDIT_TOOL::isRouterActive(), IsToolActive(), SCH_EDIT_TOOL::JustifyText(), EDIT_TOOL::JustifyText(), BOARD_INSPECTION_TOOL::LocalRatsnestTool(), EDA_3D_CONTROLLER::Main(), CVPCB_CONTROL::Main(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::Main(), SCH_MOVE_TOOL::Main(), SCH_POINT_EDITOR::Main(), SCH_SELECTION_TOOL::Main(), SYMBOL_EDITOR_MOVE_TOOL::Main(), GERBVIEW_SELECTION_TOOL::Main(), PL_EDIT_TOOL::Main(), PL_SELECTION_TOOL::Main(), PCB_PICKER_TOOL::Main(), PCB_SELECTION_TOOL::Main(), ROUTER_TOOL::MainLoop(), PCB_VIEWER_TOOLS::MeasureTool(), SCH_EDIT_TOOL::Mirror(), SYMBOL_EDITOR_EDIT_TOOL::Mirror(), EDIT_TOOL::Mirror(), BOARD_EDITOR_CONTROL::modifyLockSelected(), EDIT_TOOL::Move(), EDIT_TOOL::MoveExact(), SCH_EDITOR_CONTROL::NextLineMode(), SYMBOL_EDITOR_CONTROL::OnDeMorgan(), ARRAY_TOOL::onDialogClosed(), SELECTION_TOOL::onDisambiguationExpire(), COMMON_TOOLS::OnGridChanged(), PCB_POINT_EDITOR::OnSelectionChange(), SCH_EDITOR_CONTROL::Paste(), SYMBOL_EDITOR_EDIT_TOOL::Paste(), PL_EDIT_TOOL::Paste(), PAD_TOOL::pastePadProperties(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), SCH_GROUP_TOOL::PickNewMember(), PCB_GROUP_TOOL::PickNewMember(), EDIT_TOOL::pickReferencePoint(), SYMBOL_EDITOR_EDIT_TOOL::PinTable(), PCB_CONTROL::placeBoardItems(), BOARD_EDITOR_CONTROL::PlaceFootprint(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), SCH_EDITOR_CONTROL::PlaceLinkedDesignBlock(), PCB_CONTROL::PlaceLinkedDesignBlock(), SCH_DRAWING_TOOLS::PlaceNextSymbolUnit(), DRAWING_TOOL::PlaceReferenceImage(), SCH_DRAWING_TOOLS::PlaceSymbol(), DRAWING_TOOL::PlaceText(), DRAWING_TOOL::PlaceTuningPattern(), POSITION_RELATIVE_TOOL::PositionRelativeInteractively(), GERBVIEW_CONTROL::Print(), PCB_CONTROL::Print(), SCH_EDIT_TOOL::Properties(), SYMBOL_EDITOR_EDIT_TOOL::Properties(), EDIT_TOOL::Properties(), PAD_TOOL::pushPadSettings(), EDIT_TOOL::rebuildConnectivity(), ZONE_FILLER_TOOL::rebuildConnectivity(), SCH_SELECTION_TOOL::RebuildSelection(), PAD_TOOL::RecombinePad(), SCH_EDITOR_CONTROL::Redo(), SYMBOL_EDITOR_EDIT_TOOL::Redo(), GENERATOR_TOOL::RegenerateSelected(), POSITION_RELATIVE_TOOL::RelativeItemSelectionMove(), EDA_3D_CONTROLLER::ReloadBoard(), EDIT_TOOL::Remove(), SCH_POINT_EDITOR::removeCorner(), PCB_POINT_EDITOR::removeCorner(), GROUP_TOOL::RemoveFromGroup(), SELECTION_TOOL::RemoveItemFromSel(), SELECTION_TOOL::RemoveItemsFromSel(), FOOTPRINT_EDITOR_CONTROL::RenameFootprint(), SYMBOL_EDITOR_CONTROL::RenameSymbol(), SCH_EDIT_TOOL::RepeatDrawItem(), SYMBOL_EDITOR_DRAWING_TOOLS::RepeatDrawItem(), MULTICHANNEL_TOOL::repeatLayout(), PCB_SELECTION_TOOL::RequestSelection(), SCH_SELECTION_TOOL::RequestSelection(), EDA_3D_CONTROLLER::Reset(), COMMON_TOOLS::Reset(), PNS::TOOL_BASE::Reset(), GENERATOR_TOOL_PNS_PROXY::Reset(), COMMON_TOOLS::ResetLocalCoords(), TOOL_INTERACTIVE::resetTransitions(), ROUTER_TOOL::restoreSelection(), SCH_EDIT_TOOL::Rotate(), SYMBOL_EDITOR_EDIT_TOOL::Rotate(), EDIT_TOOL::Rotate(), ROUTER_TOOL::RouteSelected(), TOOL_INTERACTIVE::RunMainStack(), DRC_TOOL::RunTests(), SCH_EDITOR_CONTROL::SaveToLinkedDesignBlock(), PCB_CONTROL::SaveToLinkedDesignBlock(), SCH_SELECTION_TOOL::Selectable(), SCH_SELECTION_TOOL::SelectAll(), PCB_SELECTION_TOOL::SelectAll(), SCH_SELECTION_TOOL::SelectColumns(), PCB_SELECTION_TOOL::SelectColumns(), SCH_SELECTION_TOOL::SelectConnection(), PCB_TOOL_BASE::selection(), COMMON_TOOLS::SelectionTool(), GERBVIEW_SELECTION_TOOL::SelectItem(), PCB_PICKER_TOOL::SelectItemInteractively(), GERBVIEW_SELECTION_TOOL::SelectItems(), SCH_SELECTION_TOOL::selectMultiple(), PL_SELECTION_TOOL::selectMultiple(), PCB_SELECTION_TOOL::SelectMultiple(), PCB_SELECTION_TOOL::selectNet(), SCH_SELECTION_TOOL::SelectNext(), GERBVIEW_SELECTION_TOOL::selectPoint(), PCB_TEST_SELECTION_TOOL::selectPoint(), PL_SELECTION_TOOL::SelectPoint(), PCB_SELECTION_TOOL::selectPoint(), SCH_SELECTION_TOOL::selectPoint(), PCB_PICKER_TOOL::SelectPointInteractively(), PCB_SELECTION_TOOL::SelectPolyArea(), SCH_SELECTION_TOOL::SelectPrevious(), PCB_SELECTION_TOOL::SelectRectArea(), SCH_SELECTION_TOOL::SelectRows(), PCB_SELECTION_TOOL::SelectRows(), PCB_SELECTION_TOOL::selectSameSheet(), PCB_SELECTION_TOOL::selectSheetContents(), SCH_SELECTION_TOOL::SelectTable(), PCB_SELECTION_TOOL::SelectTable(), PCB_SELECTION_TOOL::selectTableCells(), SCH_SELECTION_TOOL::selectTableCells(), DRAWING_TOOL::SetAnchor(), SCH_EDIT_TOOL::SetAttribute(), TOOL_INTERACTIVE::SetContextMenu(), EDA_3D_CONTROLLER::SetMaterial(), PCB_SELECTION_TOOL::SetSelectPoly(), PCB_SELECTION_TOOL::SetSelectRect(), DRC_TOOL::ShowDRCDialog(), BOARD_INSPECTION_TOOL::ShowFootprintLinks(), SCH_EDITOR_CONTROL::SimProbe(), SCH_EDITOR_CONTROL::SimTune(), SCH_DRAWING_TOOLS::SingleClickPlace(), PCB_CONTROL::SnapMode(), SCH_EDIT_TOOL::Swap(), SYMBOL_EDITOR_EDIT_TOOL::Swap(), EDIT_TOOL::Swap(), SCH_SELECTION_TOOL::SyncSelection(), COMMON_TOOLS::ToggleCursor(), COMMON_TOOLS::ToggleCursorStyle(), EDA_3D_CONTROLLER::ToggleLayersManager(), EDA_3D_CONTROLLER::ToggleRaytracing(), EDA_3D_CONTROLLER::ToggleVisibility(), BOARD_EDITOR_CONTROL::TrackWidthDec(), BOARD_EDITOR_CONTROL::TrackWidthInc(), SCH_MOVE_TOOL::trimDanglingLines(), SCH_DRAWING_TOOLS::TwoClickPlace(), SYMBOL_EDITOR_DRAWING_TOOLS::TwoClickPlace(), SCH_EDITOR_CONTROL::Undo(), SYMBOL_EDITOR_EDIT_TOOL::Undo(), SCH_LINE_WIRE_BUS_TOOL::UnfoldBus(), GROUP_TOOL::Ungroup(), PCB_SELECTION_TOOL::unrouteSegment(), PCB_SELECTION_TOOL::unrouteSelected(), SCH_SELECTION_TOOL::UnselectAll(), PCB_SELECTION_TOOL::UnselectAll(), GERBVIEW_SELECTION_TOOL::UnselectItem(), GERBVIEW_SELECTION_TOOL::UnselectItems(), PNS::TOOL_BASE::updateEndItem(), PCB_POINT_EDITOR::updateItem(), BOARD_INSPECTION_TOOL::UpdateLocalRatsnest(), SCH_INSPECTION_TOOL::UpdateMessagePanel(), GERBVIEW_CONTROL::UpdateMessagePanel(), PL_EDITOR_CONTROL::UpdateMessagePanel(), PCB_CONTROL::UpdateMessagePanel(), EDIT_TOOL::updateModificationPoint(), MULTICHANNEL_TOOL::UpdatePickedItem(), PNS::TOOL_BASE::updateStartItem(), BOARD_EDITOR_CONTROL::ViaSizeDec(), BOARD_EDITOR_CONTROL::ViaSizeInc(), TOOL_INTERACTIVE::Wait(), BOARD_EDITOR_CONTROL::ZoneDuplicate(), ZONE_FILLER_TOOL::ZoneFill(), BOARD_EDITOR_CONTROL::ZoneMerge(), and ZONE_FILLER_TOOL::ZoneUnfill().

m_toolName

std::string TOOL_BASE::m_toolName

protected

Names are expected to obey the format application.ToolName (eg.

pcbnew.InteractiveSelection).

Definition at line 219 of file tool_base.h.

Referenced by GetName().

m_type

TOOL_TYPE TOOL_BASE::m_type

protected

Definition at line 214 of file tool_base.h.

Referenced by GetType().

---

The documentation for this class was generated from the following files:

• tool_base.h
• tool_base.cpp