KiCad PCB EDA Suite
BOARD_REANNOTATE_TOOL Class Reference

#include <board_reannotate_tool.h>

Inheritance diagram for BOARD_REANNOTATE_TOOL:
PCB_TOOL_BASE TOOL_INTERACTIVE TOOL_BASE

Public Types

enum  RESET_REASON { RUN , MODEL_RELOAD , GAL_SWITCH , REDRAW }
 Determine the reason of reset for a tool. More...
 

Public Member Functions

 BOARD_REANNOTATE_TOOL ()
 
bool Init () override
 Init() is called once upon a registration of the tool. More...
 
void Reset (RESET_REASON aReason) override
 Bring the tool to a known, initial state. More...
 
int ShowReannotateDialog (const TOOL_EVENT &aEvent)
 
int ReannotateDuplicatesInSelection ()
 
int ReannotateDuplicates (const PCB_SELECTION &aSelectionToReannotate, const std::vector< EDA_ITEM * > &aAdditionalFootprints)
 
void SetIsFootprintEditor (bool aEnabled)
 Function SetIsFootprintEditor() More...
 
bool IsFootprintEditor () const
 
void SetIsBoardEditor (bool aEnabled)
 
bool IsBoardEditor () const
 
virtual bool Is45Limited () const
 Should the tool use its 45° mode option? More...
 
void Activate ()
 Run the tool. More...
 
TOOL_MENUGetToolMenu ()
 
void SetContextMenu (ACTION_MENU *aMenu, CONTEXT_MENU_TRIGGER aTrigger=CMENU_BUTTON)
 Assign a context menu and tells when it should be activated. More...
 
void RunMainStack (std::function< void()> aFunc)
 Call a function using the main stack. More...
 
template<class T >
void Go (int(T::*aStateFunc)(const TOOL_EVENT &), const TOOL_EVENT_LIST &aConditions=TOOL_EVENT(TC_ANY, TA_ANY))
 Define which state (aStateFunc) to go when a certain event arrives (aConditions). More...
 
TOOL_EVENTWait (const TOOL_EVENT_LIST &aEventList=TOOL_EVENT(TC_ANY, TA_ANY))
 Suspend execution of the tool until an event specified in aEventList arrives. More...
 
TOOL_TYPE GetType () const
 Return the type of the tool. More...
 
TOOL_ID GetId () const
 Return the unique identifier of the tool. More...
 
const std::string & GetName () const
 Return the name of the tool. More...
 
TOOL_MANAGERGetManager () const
 Return the instance of TOOL_MANAGER that takes care of the tool. More...
 
bool IsToolActive () const
 

Protected Types

enum  INTERACTIVE_PLACEMENT_OPTIONS { IPO_ROTATE = 0x01 , IPO_FLIP = 0x02 , IPO_SINGLE_CLICK = 0x04 , IPO_REPEAT = 0x08 }
 Options for placing items interactively. More...
 

Protected Member Functions

void doInteractiveItemPlacement (const TOOL_EVENT &aTool, INTERACTIVE_PLACER_BASE *aPlacer, const wxString &aCommitMessage, int aOptions=IPO_ROTATE|IPO_FLIP|IPO_REPEAT)
 Helper function for performing a common interactive idiom: wait for a left click, place an item there (perhaps with a dialog or other user interaction), then have it move with the mouse and respond to rotate/flip, etc. More...
 
KIGFX::PCB_VIEWview () const
 
KIGFX::VIEW_CONTROLScontrols () const
 
PCB_BASE_EDIT_FRAMEframe () const
 
BOARDboard () const
 
FOOTPRINTfootprint () const
 
PCBNEW_SETTINGS::DISPLAY_OPTIONSdisplayOptions () const
 
PCB_DRAW_PANEL_GALcanvas () const
 
const PCB_SELECTIONselection () const
 
PCB_SELECTIONselection ()
 
void attachManager (TOOL_MANAGER *aManager)
 Set the TOOL_MANAGER the tool will belong to. More...
 
KIGFX::VIEWgetView () const
 Returns the instance of #VIEW object used in the application. More...
 
KIGFX::VIEW_CONTROLSgetViewControls () const
 Return the instance of VIEW_CONTROLS object used in the application. More...
 
template<typename T >
T * getEditFrame () const
 Return the application window object, casted to requested user type. More...
 
template<typename T >
T * getModel () const
 Return the model object if it matches the requested type. More...
 

Protected Attributes

bool m_isFootprintEditor
 
bool m_isBoardEditor
 
TOOL_MENU m_menu
 The functions below are not yet implemented - their interface may change. More...
 
TOOL_TYPE m_type
 Unique identifier for the tool, assigned by a TOOL_MANAGER instance. More...
 
TOOL_ID m_toolId
 Name of the tool. More...
 
std::string m_toolName
 
TOOL_MANAGERm_toolMgr
 

Private Member Functions

void setTransitions () override
 This method is meant to be overridden in order to specify handlers for events. More...
 
void resetTransitions ()
 Clear the current transition map and restores the default one created by setTransitions(). More...
 
void goInternal (TOOL_STATE_FUNC &aState, const TOOL_EVENT_LIST &aConditions)
 
EDA_ITEMgetModelInt () const
 
TOOLS_HOLDERgetToolHolderInt () const
 

Private Attributes

PCB_SELECTION_TOOLm_selectionTool
 
PCB_EDIT_FRAMEm_frame
 

Detailed Description

Definition at line 35 of file board_reannotate_tool.h.

Member Enumeration Documentation

◆ INTERACTIVE_PLACEMENT_OPTIONS

Options for placing items interactively.

Enumerator
IPO_ROTATE 

Handle the rotate action in the loop by calling the item's rotate method.

IPO_FLIP 

Handle flip action in the loop by calling the item's flip method.

IPO_SINGLE_CLICK 

Create an item immediately on placement starting, otherwise show the pencil cursor until the item is created.

IPO_REPEAT 

Allow repeat placement of the item.

Definition at line 121 of file pcb_tool_base.h.

121 {
123 IPO_ROTATE = 0x01,
124
126 IPO_FLIP = 0x02,
127
130 IPO_SINGLE_CLICK = 0x04,
131
133 IPO_REPEAT = 0x08
134 };
@ IPO_FLIP
Handle flip action in the loop by calling the item's flip method.
@ IPO_ROTATE
Handle the rotate action in the loop by calling the item's rotate method.
@ IPO_SINGLE_CLICK
Create an item immediately on placement starting, otherwise show the pencil cursor until the item is ...
@ IPO_REPEAT
Allow repeat placement of the item.

◆ RESET_REASON

enum TOOL_BASE::RESET_REASON
inherited

Determine the reason of reset for a tool.

Enumerator
RUN 

Tool is invoked after being inactive.

MODEL_RELOAD 

Model changes (required full reload)

GAL_SWITCH 

Rendering engine changes.

REDRAW 

Full drawing refresh.

Definition at line 77 of file tool_base.h.

78 {
79 RUN,
82 REDRAW
83 };
@ REDRAW
Full drawing refresh.
Definition: tool_base.h:82
@ MODEL_RELOAD
Model changes (required full reload)
Definition: tool_base.h:80
@ GAL_SWITCH
Rendering engine changes.
Definition: tool_base.h:81
@ RUN
Tool is invoked after being inactive.
Definition: tool_base.h:79

Constructor & Destructor Documentation

◆ BOARD_REANNOTATE_TOOL()

BOARD_REANNOTATE_TOOL::BOARD_REANNOTATE_TOOL ( )

Definition at line 34 of file board_reannotate_tool.cpp.

34 :
35 PCB_TOOL_BASE( "pcbnew.ReannotateTool" ),
36 m_selectionTool( nullptr ),
37 m_frame( nullptr )
38{
39}
PCB_SELECTION_TOOL * m_selectionTool
PCB_TOOL_BASE(TOOL_ID aId, const std::string &aName)
Constructor.
Definition: pcb_tool_base.h:77

Member Function Documentation

◆ Activate()

void TOOL_INTERACTIVE::Activate ( )
inherited

Run the tool.

After activation, the tool starts receiving events until it is finished.

Definition at line 51 of file tool_interactive.cpp.

52{
54}
TOOL_MANAGER * m_toolMgr
Definition: tool_base.h:215
TOOL_ID m_toolId
Name of the tool.
Definition: tool_base.h:210
bool InvokeTool(TOOL_ID aToolId)
Call a tool by sending a tool activation event to tool of given ID.

References TOOL_MANAGER::InvokeTool(), TOOL_BASE::m_toolId, and TOOL_BASE::m_toolMgr.

Referenced by AUTOPLACE_TOOL::autoplace(), EDIT_TOOL::copyToClipboard(), SCH_EDIT_TOOL::DeleteItemCursor(), SYMBOL_EDITOR_EDIT_TOOL::DeleteItemCursor(), PL_EDIT_TOOL::DeleteItemCursor(), PCB_CONTROL::DeleteItemCursor(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), EDIT_TOOL::DragArcTrack(), DRAWING_TOOL::DrawArc(), DRAWING_TOOL::DrawCircle(), DRAWING_TOOL::DrawDimension(), DRAWING_TOOL::DrawLine(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::DrawRectangle(), SCH_DRAWING_TOOLS::DrawShape(), SYMBOL_EDITOR_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), DRAWING_TOOL::DrawZone(), BOARD_EDITOR_CONTROL::DrillOrigin(), PAD_TOOL::EnumeratePads(), PCB_CONTROL::GridSetOrigin(), SCH_EDITOR_CONTROL::HighlightNetCursor(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), DRAWING_TOOL::InteractivePlaceWithPreview(), BOARD_INSPECTION_TOOL::LocalRatsnestTool(), EE_POINT_EDITOR::Main(), SCH_MOVE_TOOL::Main(), SYMBOL_EDITOR_MOVE_TOOL::Main(), PICKER_TOOL::Main(), PL_EDIT_TOOL::Main(), PL_POINT_EDITOR::Main(), PCB_PICKER_TOOL::Main(), LENGTH_TUNER_TOOL::MainLoop(), ROUTER_TOOL::MainLoop(), GERBVIEW_INSPECTION_TOOL::MeasureTool(), PCB_VIEWER_TOOLS::MeasureTool(), PCB_POINT_EDITOR::OnSelectionChange(), GROUP_TOOL::PickNewMember(), SYMBOL_EDITOR_DRAWING_TOOLS::PlaceAnchor(), BOARD_EDITOR_CONTROL::PlaceFootprint(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), SCH_DRAWING_TOOLS::PlaceSymbol(), DRAWING_TOOL::PlaceText(), EDIT_TOOL::Remove(), ROUTER_TOOL::RouteSelected(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), DRAWING_TOOL::SetAnchor(), DRC_TOOL::ShowDRCDialog(), SCH_DRAWING_TOOLS::SingleClickPlace(), SCH_DRAWING_TOOLS::TwoClickPlace(), SYMBOL_EDITOR_DRAWING_TOOLS::TwoClickPlace(), and SCH_LINE_WIRE_BUS_TOOL::UnfoldBus().

◆ attachManager()

void TOOL_BASE::attachManager ( TOOL_MANAGER aManager)
protectedinherited

Set the TOOL_MANAGER the tool will belong to.

Called by TOOL_MANAGER::RegisterTool()

Definition at line 60 of file tool_base.cpp.

61{
62 m_toolMgr = aManager;
63}

References TOOL_BASE::m_toolMgr.

Referenced by TOOL_MANAGER::RegisterTool().

◆ board()

BOARD * PCB_TOOL_BASE::board ( ) const
inlineprotectedinherited

Definition at line 170 of file pcb_tool_base.h.

170{ return getModel<BOARD>(); }

Referenced by PCB_CONTROL::AppendBoard(), BOARD_EDITOR_CONTROL::AssignNetclass(), AUTOPLACE_TOOL::autoplace(), BOARD_INSPECTION_TOOL::calculateSelectionRatsnest(), EDIT_TOOL::ChangeTrackWidth(), ZONE_FILLER_TOOL::CheckAllZones(), BOARD_INSPECTION_TOOL::ClearHighlight(), EDIT_TOOL::copyToClipboard(), FOOTPRINT_EDITOR_CONTROL::CreateFootprint(), MICROWAVE_TOOL::createInductorBetween(), ROUTER_TOOL::CustomTrackWidthDialog(), PCB_CONTROL::DeleteItemCursor(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), EDIT_TOOL::DragArcTrack(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), DRAWING_TOOL::drawShape(), PAD_TOOL::EnumeratePads(), PAD_TOOL::explodePad(), BOARD_EDITOR_CONTROL::ExportNetlist(), ZONE_FILLER_TOOL::FillAllZones(), EDIT_TOOL::FilletTracks(), PCB_TOOL_BASE::footprint(), GROUP_TOOL::Group(), ROUTER_TOOL::handleLayerSwitch(), BOARD_INSPECTION_TOOL::highlightNet(), ROUTER_TOOL::Init(), ROUTER_TOOL::InlineDrag(), DRAWING_TOOL::InteractivePlaceWithPreview(), PCB_CONTROL::LayerNext(), PCB_CONTROL::LayerPrev(), BOARD_INSPECTION_TOOL::LocalRatsnestTool(), EDIT_TOOL::MoveExact(), FOOTPRINT_EDITOR_CONTROL::NewFootprint(), PCB_CONTROL::Paste(), PCB_CONTROL::placeBoardItems(), BOARD_EDITOR_CONTROL::PlaceFootprint(), PAD_TOOL::PlacePad(), DRAWING_TOOL::PlaceText(), PCB_CONTROL::pruneItemLayers(), EDIT_TOOL::rebuildConnectivity(), ZONE_FILLER_TOOL::rebuildConnectivity(), PAD_TOOL::RecombinePad(), BOARD_EDITOR_CONTROL::RepairBoard(), FOOTPRINT_EDITOR_CONTROL::RepairFootprint(), PNS::TOOL_BASE::Reset(), PAD_TOOL::Reset(), PCB_CONTROL::Reset(), PCB_CONTROL::TrackDisplayMode(), PCB_CONTROL::unfilledZoneCheck(), GROUP_TOOL::Ungroup(), ROUTER_TOOL::UpdateMessagePanel(), ROUTER_TOOL::updateSizesAfterLayerSwitch(), PCB_CONTROL::ViaDisplayMode(), PCB_CONTROL::ZoneDisplayMode(), ZONE_FILLER_TOOL::ZoneFill(), ZONE_FILLER_TOOL::ZoneFillDirty(), BOARD_EDITOR_CONTROL::ZoneMerge(), and ZONE_FILLER_TOOL::ZoneUnfillAll().

◆ canvas()

◆ controls()

◆ displayOptions()

◆ doInteractiveItemPlacement()

void PCB_TOOL_BASE::doInteractiveItemPlacement ( const TOOL_EVENT aTool,
INTERACTIVE_PLACER_BASE aPlacer,
const wxString &  aCommitMessage,
int  aOptions = IPO_ROTATE | IPO_FLIP | IPO_REPEAT 
)
protectedinherited

Helper function for performing a common interactive idiom: wait for a left click, place an item there (perhaps with a dialog or other user interaction), then have it move with the mouse and respond to rotate/flip, etc.

More complex interactive processes are not supported here, you should implement a customised event loop for those.

Parameters
aItemCreatorthe callable that will attempt to create the item
aCommitMessagethe message used on a successful commit

Definition at line 41 of file pcb_tool_base.cpp.

44{
45 using namespace std::placeholders;
46 std::unique_ptr<BOARD_ITEM> newItem;
47
48 frame()->PushTool( aTool );
49
50 BOARD_COMMIT commit( frame() );
51
53
54 Activate();
55 // Must be done after Activate() so that it gets set into the correct context
56 controls()->ShowCursor( true );
57 controls()->ForceCursorPosition( false );
58 // do not capture or auto-pan until we start placing an item
59
60 PCB_GRID_HELPER grid( m_toolMgr, frame()->GetMagneticItemsSettings() );
61
62 // Add a VIEW_GROUP that serves as a preview for the new item
63 PCB_SELECTION preview;
64 view()->Add( &preview );
65
66 aPlacer->m_board = board();
67 aPlacer->m_frame = frame();
68 aPlacer->m_modifiers = 0;
69
70 auto makeNewItem =
71 [&]( VECTOR2I aPosition )
72 {
73 if( frame()->GetModel() )
74 newItem = aPlacer->CreateItem();
75
76 if( newItem )
77 {
78 newItem->SetPosition( aPosition );
79 preview.Add( newItem.get() );
80
81 if( newItem->Type() == PCB_FOOTPRINT_T )
82 {
83 FOOTPRINT* fp = dyn_cast<FOOTPRINT*>( newItem.get() );
84
85 // footprints have more drawable parts
86 fp->RunOnChildren( std::bind( &KIGFX::VIEW_GROUP::Add, &preview, _1 ) );
87 }
88 }
89 };
90
91 if( aOptions & IPO_SINGLE_CLICK )
92 makeNewItem( controls()->GetCursorPosition() );
93
94 auto setCursor =
95 [&]()
96 {
97 if( !newItem )
99 else
101 };
102
103 // Set initial cursor
104 setCursor();
105
106 // Main loop: keep receiving events
107 while( TOOL_EVENT* evt = Wait() )
108 {
109 setCursor();
110
111 grid.SetSnap( false ); // Interactive placement tools need to set their own item snaps
112 grid.SetUseGrid( getView()->GetGAL()->GetGridSnapping() && !evt->DisableGridSnapping() );
113 VECTOR2I cursorPos = grid.BestSnapAnchor( controls()->GetMousePosition(), nullptr );
114
115 aPlacer->m_modifiers = evt->Modifier();
116
117 auto cleanup =
118 [&] ()
119 {
120 newItem = nullptr;
121 preview.Clear();
122 view()->Update( &preview );
123 controls()->SetAutoPan( false );
124 controls()->CaptureCursor( false );
125 controls()->ShowCursor( true );
126 controls()->ForceCursorPosition( false );
127 };
128
129 if( evt->IsCancelInteractive() )
130 {
131 if( aOptions & IPO_SINGLE_CLICK )
132 {
133 cleanup();
134 frame()->PopTool( aTool );
135 break;
136 }
137 else if( newItem )
138 {
139 cleanup();
140 }
141 else
142 {
143 frame()->PopTool( aTool );
144 break;
145 }
146 }
147 else if( evt->IsActivate() )
148 {
149 if( newItem )
150 cleanup();
151
152 if( evt->IsPointEditor() )
153 {
154 // don't exit (the point editor runs in the background)
155 }
156 else if( evt->IsMoveTool() )
157 {
158 // leave ourselves on the stack so we come back after the move
159 break;
160 }
161 else
162 {
163 frame()->PopTool( aTool );
164 break;
165 }
166 }
167 else if( evt->IsClick( BUT_LEFT ) || evt->IsDblClick( BUT_LEFT ) )
168 {
169 if( !newItem )
170 {
171 // create the item if possible
172 makeNewItem( cursorPos );
173
174 // no item created, so wait for another click
175 if( !newItem )
176 continue;
177
178 controls()->CaptureCursor( true );
179 controls()->SetAutoPan( true );
180 }
181 else
182 {
183 BOARD_ITEM* newBoardItem = newItem.release();
184 EDA_ITEM_FLAGS oldFlags = newBoardItem->GetFlags();
185
186 newBoardItem->ClearFlags();
187
188 if( !aPlacer->PlaceItem( newBoardItem, commit ) )
189 {
190 newBoardItem->SetFlags( oldFlags );
191 continue;
192 }
193
194 preview.Clear();
195 commit.Push( aCommitMessage );
196
197 controls()->CaptureCursor( false );
198 controls()->SetAutoPan( false );
199 controls()->ShowCursor( true );
200
201 if( !( aOptions & IPO_REPEAT ) )
202 break;
203
204 if( aOptions & IPO_SINGLE_CLICK )
205 makeNewItem( controls()->GetCursorPosition() );
206
207 setCursor();
208 }
209 }
210 else if( evt->IsClick( BUT_RIGHT ) )
211 {
213 }
214 else if( evt->IsAction( &PCB_ACTIONS::trackViaSizeChanged ) )
215 {
217 }
218 else if( newItem && evt->Category() == TC_COMMAND )
219 {
220 /*
221 * Handle any events that can affect the item as we move it around
222 */
223 if( TOOL_EVT_UTILS::IsRotateToolEvt( *evt ) && ( aOptions & IPO_ROTATE ) )
224 {
225 EDA_ANGLE rotationAngle = TOOL_EVT_UTILS::GetEventRotationAngle( *frame(), *evt );
226 newItem->Rotate( newItem->GetPosition(), rotationAngle );
227 view()->Update( &preview );
228 }
229 else if( evt->IsAction( &PCB_ACTIONS::flip ) && ( aOptions & IPO_FLIP ) )
230 {
231 newItem->Flip( newItem->GetPosition(), frame()->GetPcbNewSettings()->m_FlipLeftRight );
232 view()->Update( &preview );
233 }
234 else if( evt->IsAction( &PCB_ACTIONS::properties ) )
235 {
236 frame()->OnEditItemRequest( newItem.get() );
237
238 // Notify other tools of the changes
240 }
241 else if( evt->IsAction( &ACTIONS::refreshPreview ) )
242 {
243 preview.Clear();
244 newItem.reset();
245
246 makeNewItem( cursorPos );
247 aPlacer->SnapItem( newItem.get() );
248 view()->Update( &preview );
249 }
250 else
251 {
252 evt->SetPassEvent();
253 }
254 }
255 else if( newItem && evt->IsMotion() )
256 {
257 // track the cursor
258 newItem->SetPosition( cursorPos );
259 aPlacer->SnapItem( newItem.get() );
260
261 // Show a preview of the item
262 view()->Update( &preview );
263 }
264 else
265 {
266 evt->SetPassEvent();
267 }
268 }
269
270 view()->Remove( &preview );
272 controls()->SetAutoPan( false );
273 controls()->CaptureCursor( false );
274 controls()->ForceCursorPosition( false );
275}
static TOOL_ACTION refreshPreview
Definition: actions.h:109
A base class for any item which can be embedded within the BOARD container class, and therefore insta...
Definition: board_item.h:58
void SetCurrentCursor(KICURSOR aCursor)
Set the current cursor shape for this panel.
void SetFlags(EDA_ITEM_FLAGS aMask)
Definition: eda_item.h:139
void ClearFlags(EDA_ITEM_FLAGS aMask=EDA_ITEM_ALL_FLAGS)
Definition: eda_item.h:141
EDA_ITEM_FLAGS GetFlags() const
Definition: eda_item.h:142
static const TOOL_EVENT SelectedItemsModified
Selected items were moved, this can be very high frequency on the canvas, use with care.
Definition: actions.h:213
void RunOnChildren(const std::function< void(BOARD_ITEM *)> &aFunction) const
Invoke a function on all BOARD_ITEMs that belong to the footprint (pads, drawings,...
Definition: footprint.cpp:1379
virtual void Update(const VIEW_ITEM *aItem, int aUpdateFlags) const override
For dynamic VIEWs, inform the associated VIEW that the graphical representation of this item has chan...
Definition: pcb_view.cpp:92
virtual void Add(VIEW_ITEM *aItem, int aDrawPriority=-1) override
Add a VIEW_ITEM to the view.
Definition: pcb_view.cpp:58
virtual void Remove(VIEW_ITEM *aItem) override
Remove a VIEW_ITEM from the view.
Definition: pcb_view.cpp:75
virtual void CaptureCursor(bool aEnabled)
Force the cursor to stay within the drawing panel area.
virtual void ForceCursorPosition(bool aEnabled, const VECTOR2D &aPosition=VECTOR2D(0, 0))
Place the cursor immediately at a given point.
virtual void ShowCursor(bool aEnabled)
Enable or disables display of cursor.
virtual void SetAutoPan(bool aEnabled)
Turn on/off auto panning (this feature is used when there is a tool active (eg.
virtual void Add(VIEW_ITEM *aItem)
Add an item to the group.
Definition: view_group.cpp:57
static TOOL_ACTION trackViaSizeChanged
Definition: pcb_actions.h:338
static TOOL_ACTION properties
Activation of the edit tool.
Definition: pcb_actions.h:149
static TOOL_ACTION selectionClear
Clear the current selection.
Definition: pcb_actions.h:59
static TOOL_ACTION flip
Flipping of selected objects.
Definition: pcb_actions.h:126
virtual void OnEditItemRequest(BOARD_ITEM *aItem)=0
Install the corresponding dialog editor for the given item.
virtual BOARD_ITEM_CONTAINER * GetModel() const =0
KIGFX::PCB_VIEW * view() const
KIGFX::VIEW_CONTROLS * controls() const
BOARD * board() const
const PCB_SELECTION & selection() const
virtual void Add(EDA_ITEM *aItem)
Definition: selection.cpp:42
virtual void Clear() override
Remove all the stored items from the group.
Definition: selection.h:92
virtual void PopTool(const TOOL_EVENT &aEvent)
Pops a tool from the stack.
virtual void PushTool(const TOOL_EVENT &aEvent)
NB: the definition of "tool" is different at the user level.
TOOL_MANAGER * GetManager() const
Return the instance of TOOL_MANAGER that takes care of the tool.
Definition: tool_base.h:144
KIGFX::VIEW * getView() const
Returns the instance of #VIEW object used in the application.
Definition: tool_base.cpp:36
Generic, UI-independent tool event.
Definition: tool_event.h:156
TOOL_MENU m_menu
The functions below are not yet implemented - their interface may change.
TOOL_EVENT * Wait(const TOOL_EVENT_LIST &aEventList=TOOL_EVENT(TC_ANY, TA_ANY))
Suspend execution of the tool until an event specified in aEventList arrives.
void Activate()
Run the tool.
bool ProcessEvent(const TOOL_EVENT &aEvent)
Propagate an event to tools that requested events of matching type(s).
bool RunAction(const std::string &aActionName, bool aNow=false, T aParam=NULL)
Run the specified action.
Definition: tool_manager.h:142
void ShowContextMenu(SELECTION &aSelection)
Helper function to set and immediately show a CONDITIONAL_MENU in concert with the given SELECTION.
Definition: tool_menu.cpp:57
std::uint32_t EDA_ITEM_FLAGS
EDA_ANGLE GetEventRotationAngle(const PCB_BASE_EDIT_FRAME &aFrame, const TOOL_EVENT &aEvent)
Function getEventRotationAngle()
bool IsRotateToolEvt(const TOOL_EVENT &aEvt)
Function isRotateToolEvt()
virtual void SnapItem(BOARD_ITEM *aItem)
PCB_BASE_EDIT_FRAME * m_frame
Definition: pcb_tool_base.h:64
virtual std::unique_ptr< BOARD_ITEM > CreateItem()=0
virtual bool PlaceItem(BOARD_ITEM *aItem, BOARD_COMMIT &aCommit)
@ TC_COMMAND
Definition: tool_event.h:52
@ BUT_LEFT
Definition: tool_event.h:127
@ BUT_RIGHT
Definition: tool_event.h:128
@ PCB_FOOTPRINT_T
class FOOTPRINT, a footprint
Definition: typeinfo.h:86

References TOOL_INTERACTIVE::Activate(), SELECTION::Add(), KIGFX::VIEW_GROUP::Add(), KIGFX::PCB_VIEW::Add(), ARROW, PCB_TOOL_BASE::board(), BUT_LEFT, BUT_RIGHT, KIGFX::VIEW_CONTROLS::CaptureCursor(), SELECTION::Clear(), EDA_ITEM::ClearFlags(), PCB_TOOL_BASE::controls(), INTERACTIVE_PLACER_BASE::CreateItem(), PCB_ACTIONS::flip, KIGFX::VIEW_CONTROLS::ForceCursorPosition(), PCB_TOOL_BASE::frame(), PCB_BASE_FRAME::GetCanvas(), TOOL_EVT_UTILS::GetEventRotationAngle(), EDA_ITEM::GetFlags(), TOOL_BASE::GetManager(), PCB_BASE_FRAME::GetModel(), TOOL_BASE::getView(), grid, PCB_TOOL_BASE::IPO_FLIP, PCB_TOOL_BASE::IPO_REPEAT, PCB_TOOL_BASE::IPO_ROTATE, PCB_TOOL_BASE::IPO_SINGLE_CLICK, TOOL_EVT_UTILS::IsRotateToolEvt(), INTERACTIVE_PLACER_BASE::m_board, INTERACTIVE_PLACER_BASE::m_frame, TOOL_INTERACTIVE::m_menu, INTERACTIVE_PLACER_BASE::m_modifiers, TOOL_BASE::m_toolMgr, PCB_BASE_EDIT_FRAME::OnEditItemRequest(), PCB_FOOTPRINT_T, PENCIL, PLACE, INTERACTIVE_PLACER_BASE::PlaceItem(), TOOLS_HOLDER::PopTool(), TOOL_MANAGER::ProcessEvent(), PCB_ACTIONS::properties, BOARD_COMMIT::Push(), TOOLS_HOLDER::PushTool(), ACTIONS::refreshPreview, KIGFX::PCB_VIEW::Remove(), TOOL_MANAGER::RunAction(), FOOTPRINT::RunOnChildren(), EVENTS::SelectedItemsModified, PCB_TOOL_BASE::selection(), PCB_ACTIONS::selectionClear, KIGFX::VIEW_CONTROLS::SetAutoPan(), EDA_DRAW_PANEL_GAL::SetCurrentCursor(), EDA_ITEM::SetFlags(), TOOL_MENU::ShowContextMenu(), KIGFX::VIEW_CONTROLS::ShowCursor(), INTERACTIVE_PLACER_BASE::SnapItem(), TC_COMMAND, PCB_ACTIONS::trackViaSizeChanged, KIGFX::PCB_VIEW::Update(), PCB_TOOL_BASE::view(), and TOOL_INTERACTIVE::Wait().

Referenced by MICROWAVE_TOOL::addMicrowaveFootprint(), DRAWING_TOOL::DrawVia(), and PAD_TOOL::PlacePad().

◆ footprint()

◆ frame()

PCB_BASE_EDIT_FRAME * PCB_TOOL_BASE::frame ( ) const
inlineprotectedinherited

Definition at line 165 of file pcb_tool_base.h.

166 {
167 return getEditFrame<PCB_BASE_EDIT_FRAME>();
168 }

Referenced by PCB_POINT_EDITOR::addCorner(), AUTOPLACE_TOOL::autoplace(), PCB_TOOL_BASE::canvas(), ZONE_FILLER_TOOL::CheckAllZones(), PNS::TOOL_BASE::checkSnap(), PAD_TOOL::copyPadSettings(), EDIT_TOOL::copyToClipboard(), ROUTER_TOOL::CustomTrackWidthDialog(), FOOTPRINT_EDITOR_CONTROL::DeleteFootprint(), EDIT_TOOL::DeleteItems(), PCB_TOOL_BASE::displayOptions(), BOARD_EDITOR_CONTROL::doCrossProbePcbToSch(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), ROUTER_TOOL::DpDimensionsDialog(), EDIT_TOOL::DragArcTrack(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawShape(), DRAWING_TOOL::DrawVia(), DRAWING_TOOL::DrawZone(), PAD_TOOL::EditPad(), PAD_TOOL::EnumeratePads(), PAD_TOOL::explodePad(), BOARD_EDITOR_CONTROL::ExportSpecctraDSN(), ZONE_FILLER_TOOL::FillAllZones(), EDIT_TOOL::FilletTracks(), ROUTER_TOOL::finishInteractive(), EDIT_TOOL::Flip(), PCB_CONTROL::FlipPcbView(), GLOBAL_EDIT_TOOL::GlobalDeletions(), ROUTER_TOOL::handleLayerSwitch(), PCB_CONTROL::HighContrastMode(), PCB_CONTROL::HighContrastModeCycle(), BOARD_INSPECTION_TOOL::HighlightItem(), FOOTPRINT_EDITOR_CONTROL::ImportFootprint(), BOARD_EDITOR_CONTROL::ImportSpecctraSession(), SCRIPTING_TOOL::Init(), ROUTER_TOOL::Init(), EDIT_TOOL::Init(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), DRAWING_TOOL::InteractivePlaceWithPreview(), PCB_TOOL_BASE::Is45Limited(), PCB_PICKER_TOOL::Main(), LENGTH_TUNER_TOOL::MainLoop(), ROUTER_TOOL::MainLoop(), LENGTH_TUNER_TOOL::meanderSettingsDialog(), EDIT_TOOL::MoveExact(), PCB_CONTROL::NetColorModeCycle(), PCB_POINT_EDITOR::OnSelectionChange(), ROUTER_TOOL::onViaCommand(), PCB_CONTROL::Paste(), PAD_TOOL::pastePadProperties(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), LENGTH_TUNER_TOOL::performTuning(), GROUP_TOOL::PickNewMember(), PNS::TOOL_BASE::pickSingleItem(), PCB_CONTROL::placeBoardItems(), BOARD_EDITOR_CONTROL::PlaceFootprint(), DRAWING_TOOL::PlaceText(), ROUTER_TOOL::prepareInteractive(), PCB_CONTROL::pruneItemLayers(), PAD_TOOL::pushPadSettings(), PCB_CONTROL::RatsnestModeCycle(), POSITION_RELATIVE_TOOL::RelativeItemSelectionMove(), SCRIPTING_TOOL::reloadPlugins(), PCB_POINT_EDITOR::removeCorner(), PNS::TOOL_BASE::Reset(), PAD_TOOL::Reset(), EDIT_TOOL::Rotate(), ROUTER_TOOL::RouteSelected(), ROUTER_TOOL::SelectCopperLayerPair(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), PCB_POINT_EDITOR::setEditedPoint(), ROUTER_TOOL::SettingsDialog(), GLOBAL_EDIT_TOOL::swapBoardItem(), GLOBAL_EDIT_TOOL::SwapLayers(), ROUTER_TOOL::switchLayerOnViaPlacement(), DRAWING_TOOL::ToggleHV45Mode(), PCB_CONTROL::ToggleRatsnest(), PCB_CONTROL::unfilledZoneCheck(), PCB_POINT_EDITOR::updateItem(), ROUTER_TOOL::UpdateMessagePanel(), EDIT_TOOL::updateModificationPoint(), BOARD_EDITOR_CONTROL::UpdateSchematicFromPCB(), PCB_CONTROL::ZoneDisplayMode(), ZONE_FILLER_TOOL::ZoneFill(), ZONE_FILLER_TOOL::ZoneFillAll(), and ZONE_FILLER_TOOL::ZoneFillDirty().

◆ getEditFrame()

template<typename T >
T * TOOL_BASE::getEditFrame ( ) const
inlineprotectedinherited

Return the application window object, casted to requested user type.

Definition at line 185 of file tool_base.h.

186 {
187#if !defined( QA_TEST ) // Dynamic casts give the linker a seizure in the test framework
188 wxASSERT( dynamic_cast<T*>( getToolHolderInt() ) );
189#endif
190 return static_cast<T*>( getToolHolderInt() );
191 }
TOOLS_HOLDER * getToolHolderInt() const
Definition: tool_base.cpp:48

References TOOL_BASE::getToolHolderInt().

Referenced by ZONE_CREATE_HELPER::createNewZone(), and ZONE_CREATE_HELPER::setUniquePriority().

◆ GetId()

TOOL_ID TOOL_BASE::GetId ( ) const
inlineinherited

Return the unique identifier of the tool.

The identifier is set by an instance of TOOL_MANAGER.

Returns
Identifier of the tool.

Definition at line 121 of file tool_base.h.

122 {
123 return m_toolId;
124 }

References TOOL_BASE::m_toolId.

Referenced by TOOL_MANAGER::finishTool(), TOOL_MANAGER::InitTools(), TOOL_MANAGER::isActive(), TOOL_MANAGER::RegisterTool(), ACTION_MANAGER::RunHotKey(), TOOL_MANAGER::runTool(), TOOL_MANAGER::saveViewControls(), and TOOL_MANAGER::ShutdownTool().

◆ GetManager()

TOOL_MANAGER * TOOL_BASE::GetManager ( ) const
inlineinherited

◆ getModel()

template<typename T >
T * TOOL_BASE::getModel ( ) const
inlineprotectedinherited

Return the model object if it matches the requested type.

Store the type of the tool.

Definition at line 197 of file tool_base.h.

References TOOL_BASE::getModelInt().

Referenced by ZONE_CREATE_HELPER::commitZone(), and ZONE_CREATE_HELPER::createZoneFromExisting().

◆ getModelInt()

EDA_ITEM * TOOL_BASE::getModelInt ( ) const
privateinherited

Definition at line 54 of file tool_base.cpp.

55{
56 return m_toolMgr->GetModel();
57}
EDA_ITEM * GetModel() const
Definition: tool_manager.h:292

References TOOL_MANAGER::GetModel(), and TOOL_BASE::m_toolMgr.

Referenced by TOOL_BASE::getModel().

◆ GetName()

const std::string & TOOL_BASE::GetName ( void  ) const
inlineinherited

Return the name of the tool.

Tool names are expected to obey the format: application.ToolName (eg. pcbnew.InteractiveSelection).

Returns
The name of the tool.

Definition at line 134 of file tool_base.h.

135 {
136 return m_toolName;
137 }
std::string m_toolName
Definition: tool_base.h:214

References TOOL_BASE::m_toolName.

Referenced by TOOL_MANAGER::dispatchInternal(), TOOL_MANAGER::InitTools(), TOOL_MANAGER::invokeTool(), TOOL_MANAGER::RegisterTool(), TOOL_MANAGER::runTool(), and TOOL_MANAGER::ShutdownTool().

◆ getToolHolderInt()

TOOLS_HOLDER * TOOL_BASE::getToolHolderInt ( ) const
privateinherited

Definition at line 48 of file tool_base.cpp.

49{
50 return m_toolMgr->GetToolHolder();
51}
TOOLS_HOLDER * GetToolHolder() const
Definition: tool_manager.h:296

References TOOL_MANAGER::GetToolHolder(), and TOOL_BASE::m_toolMgr.

Referenced by TOOL_BASE::getEditFrame().

◆ GetToolMenu()

◆ GetType()

TOOL_TYPE TOOL_BASE::GetType ( ) const
inlineinherited

Return the type of the tool.

Returns
The type of the tool.

Definition at line 109 of file tool_base.h.

110 {
111 return m_type;
112 }
TOOL_TYPE m_type
Unique identifier for the tool, assigned by a TOOL_MANAGER instance.
Definition: tool_base.h:207

References TOOL_BASE::m_type.

Referenced by TOOL_MANAGER::finishTool(), TOOL_MANAGER::InvokeTool(), TOOL_MANAGER::ResetTools(), TOOL_MANAGER::runTool(), and TOOL_MANAGER::ShutdownTool().

◆ getView()

KIGFX::VIEW * TOOL_BASE::getView ( ) const
protectedinherited

Returns the instance of #VIEW object used in the application.

It allows tools to draw.

Returns
The instance of VIEW.

Definition at line 36 of file tool_base.cpp.

37{
38 return m_toolMgr->GetView();
39}
KIGFX::VIEW * GetView() const
Definition: tool_manager.h:285

References TOOL_MANAGER::GetView(), and TOOL_BASE::m_toolMgr.

Referenced by EE_POINT_EDITOR::addCornerCondition(), ALIGN_DISTRIBUTE_TOOL::AlignLeft(), ALIGN_DISTRIBUTE_TOOL::AlignRight(), COMMON_TOOLS::CenterContents(), SCH_EDIT_TOOL::ChangeTextType(), EE_INSPECTION_TOOL::CheckSymbol(), GERBVIEW_CONTROL::ClearAllLayers(), PL_SELECTION_TOOL::ClearSelection(), EE_SELECTION_TOOL::ClearSelection(), EE_SELECTION_TOOL::CollectHits(), SCH_LINE_WIRE_BUS_TOOL::computeBreakPoint(), COMMON_TOOLS::CursorControl(), SCH_EDIT_TOOL::DeleteItemCursor(), PL_EDIT_TOOL::DeleteItemCursor(), PCB_CONTROL::DeleteItemCursor(), EDIT_TOOL::DeleteItems(), PL_EDIT_TOOL::DoDelete(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), SELECTION_TOOL::doSelectionMenu(), COMMON_TOOLS::doZoomFit(), COMMON_TOOLS::doZoomInOut(), COMMON_TOOLS::doZoomToPreset(), EDIT_TOOL::DragArcTrack(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), SCH_LINE_WIRE_BUS_TOOL::DrawSegments(), PL_DRAWING_TOOLS::DrawShape(), DRAWING_TOOL::drawShape(), DRAWING_TOOL::DrawZone(), BOARD_EDITOR_CONTROL::DrillOrigin(), SYMBOL_EDITOR_EDIT_TOOL::Duplicate(), PAD_TOOL::EnumeratePads(), EE_SELECTION_TOOL::GetNode(), ROUTER_TOOL::getStartLayer(), PCB_CONTROL::GridResetOrigin(), PCB_CONTROL::GridSetOrigin(), EE_SELECTION_TOOL::GuessSelectionCandidates(), ROUTER_TOOL::handleCommonEvents(), EE_SELECTION_TOOL::highlight(), PL_SELECTION_TOOL::highlight(), PCB_SELECTION_TOOL::highlight(), GERBVIEW_CONTROL::HighlightControl(), BOARD_INSPECTION_TOOL::highlightNet(), PNS::TOOL_BASE::highlightNets(), PCB_SELECTION_TOOL::hitTestDistance(), SCH_EDIT_TOOL::Init(), EDIT_TOOL::Init(), ROUTER_TOOL::InlineDrag(), EE_POINT_EDITOR::Main(), SCH_MOVE_TOOL::Main(), PL_POINT_EDITOR::Main(), PCB_PICKER_TOOL::Main(), GERBVIEW_INSPECTION_TOOL::MeasureTool(), PCB_VIEWER_TOOLS::MeasureTool(), SCH_EDIT_TOOL::Mirror(), EDIT_TOOL::MoveExact(), PL_EDIT_TOOL::moveItem(), SCH_MOVE_TOOL::moveItem(), COMMON_TOOLS::OnGridChanged(), PCB_POINT_EDITOR::OnSelectionChange(), COMMON_TOOLS::PanControl(), SCH_EDITOR_CONTROL::Paste(), SYMBOL_EDITOR_EDIT_TOOL::Paste(), PL_EDIT_TOOL::Paste(), ROUTER_TOOL::performRouting(), PNS::TOOL_BASE::pickSingleItem(), BOARD_EDITOR_CONTROL::PlaceFootprint(), DRAWING_TOOL::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), SCH_DRAWING_TOOLS::PlaceSymbol(), DRAWING_TOOL::PlaceText(), ROUTER_TOOL::prepareInteractive(), SCH_EDIT_TOOL::Properties(), EDIT_TOOL::Properties(), EE_SELECTION_TOOL::Reset(), EE_TOOL_BASE< T >::Reset(), GERBVIEW_SELECTION_TOOL::Reset(), PNS::TOOL_BASE::Reset(), BOARD_EDITOR_CONTROL::Reset(), DRAWING_TOOL::Reset(), PCB_CONTROL::Reset(), PCB_SELECTION_TOOL::Reset(), SCH_EDIT_TOOL::Rotate(), GERBVIEW_SELECTION_TOOL::select(), PCB_SELECTION_TOOL::Selectable(), EE_SELECTION_TOOL::SelectAll(), PCB_SELECTION_TOOL::SelectAll(), EE_SELECTION_TOOL::selectionContains(), PL_SELECTION_TOOL::selectionContains(), PCB_SELECTION_TOOL::selectionContains(), EE_SELECTION_TOOL::selectMultiple(), PL_SELECTION_TOOL::selectMultiple(), PCB_SELECTION_TOOL::selectMultiple(), PL_SELECTION_TOOL::SelectPoint(), EE_SELECTION_TOOL::selectPoint(), ZOOM_TOOL::selectRegion(), GERBVIEW_SELECTION_TOOL::selectVisually(), DRAWING_TOOL::SetAnchor(), SCH_DRAWING_TOOLS::SingleClickPlace(), SCH_EDITOR_CONTROL::ToggleERCErrors(), SCH_EDITOR_CONTROL::ToggleERCExclusions(), SCH_EDITOR_CONTROL::ToggleERCWarnings(), SCH_EDITOR_CONTROL::ToggleHiddenFields(), SCH_EDITOR_CONTROL::ToggleHiddenPins(), SCH_DRAWING_TOOLS::TwoClickPlace(), SYMBOL_EDITOR_DRAWING_TOOLS::TwoClickPlace(), EE_SELECTION_TOOL::unhighlight(), PL_SELECTION_TOOL::unhighlight(), PCB_SELECTION_TOOL::unhighlight(), GERBVIEW_SELECTION_TOOL::unselect(), GERBVIEW_SELECTION_TOOL::unselectVisually(), EE_POINT_EDITOR::updateEditedPoint(), PL_POINT_EDITOR::updateEditedPoint(), PCB_POINT_EDITOR::updateEditedPoint(), SCH_FIND_REPLACE_TOOL::UpdateFind(), PL_POINT_EDITOR::updateItem(), PCB_POINT_EDITOR::updateItem(), EE_TOOL_BASE< T >::updateItem(), SCH_EDITOR_CONTROL::UpdateNetHighlighting(), EE_POINT_EDITOR::updatePoints(), PL_POINT_EDITOR::updatePoints(), PCB_POINT_EDITOR::updatePoints(), PCB_SELECTION_TOOL::updateSelection(), PNS::TOOL_BASE::updateStartItem(), PCB_SELECTION_TOOL::view(), PCB_TOOL_BASE::view(), PCB_VIEWER_TOOLS::view(), EE_SELECTION_TOOL::ZoomFitCrossProbeBBox(), PCB_SELECTION_TOOL::ZoomFitCrossProbeBBox(), PCB_SELECTION_TOOL::zoomFitSelection(), EE_SELECTION_TOOL::~EE_SELECTION_TOOL(), GERBVIEW_SELECTION_TOOL::~GERBVIEW_SELECTION_TOOL(), and PCB_SELECTION_TOOL::~PCB_SELECTION_TOOL().

◆ getViewControls()

KIGFX::VIEW_CONTROLS * TOOL_BASE::getViewControls ( ) const
protectedinherited

Return the instance of VIEW_CONTROLS object used in the application.

It allows tools to read & modify user input and its settings (eg. show cursor, enable snapping to grid, etc.).

Returns
The instance of VIEW_CONTROLS.

Definition at line 42 of file tool_base.cpp.

43{
44 return m_toolMgr->GetViewControls();
45}
KIGFX::VIEW_CONTROLS * GetViewControls() const
Definition: tool_manager.h:287

References TOOL_MANAGER::GetViewControls(), and TOOL_BASE::m_toolMgr.

Referenced by EE_POINT_EDITOR::addCorner(), PCB_POINT_EDITOR::addCorner(), EE_POINT_EDITOR::addCornerCondition(), EE_SELECTION_TOOL::autostartEvent(), SCH_EDIT_TOOL::BreakWire(), PCB_SELECTION_TOOL::controls(), PCB_TOOL_BASE::controls(), EDIT_TOOL::copyToClipboard(), COMMON_TOOLS::CursorControl(), EDIT_TOOL::DeleteItems(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), EDIT_TOOL::doMoveSelection(), SCH_LINE_WIRE_BUS_TOOL::doUnfoldBus(), COMMON_TOOLS::doZoomToPreset(), EDIT_TOOL::DragArcTrack(), DRAWING_TOOL::DrawCircle(), DRAWING_TOOL::DrawLine(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::DrawRectangle(), SCH_DRAWING_TOOLS::DrawShape(), SYMBOL_EDITOR_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), SCH_DRAWING_TOOLS::DrawSheet(), SYMBOL_EDITOR_EDIT_TOOL::Duplicate(), PAD_TOOL::EnumeratePads(), SCH_LINE_WIRE_BUS_TOOL::finishSegments(), SCH_EDITOR_CONTROL::HighlightNet(), BOARD_INSPECTION_TOOL::HighlightNet(), FOOTPRINT_EDITOR_CONTROL::ImportFootprint(), SCH_EDIT_TOOL::Init(), EDIT_TOOL::Init(), EE_POINT_EDITOR::Main(), EE_SELECTION_TOOL::Main(), SCH_MOVE_TOOL::Main(), SYMBOL_EDITOR_MOVE_TOOL::Main(), PICKER_TOOL::Main(), PL_EDIT_TOOL::Main(), PL_POINT_EDITOR::Main(), PCB_PICKER_TOOL::Main(), ROUTER_TOOL::MainLoop(), GERBVIEW_INSPECTION_TOOL::MeasureTool(), PCB_VIEWER_TOOLS::MeasureTool(), COMMON_TOOLS::OnGridChanged(), PCB_POINT_EDITOR::OnSelectionChange(), SCH_EDITOR_CONTROL::Paste(), SYMBOL_EDITOR_EDIT_TOOL::Paste(), ROUTER_TOOL::performDragging(), LENGTH_TUNER_TOOL::performTuning(), SYMBOL_EDITOR_DRAWING_TOOLS::PlaceAnchor(), PCB_CONTROL::placeBoardItems(), BOARD_EDITOR_CONTROL::PlaceFootprint(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImage(), PL_DRAWING_TOOLS::PlaceItem(), SCH_DRAWING_TOOLS::PlaceSymbol(), SCH_EDIT_TOOL::Properties(), EDIT_TOOL::Properties(), SCH_EDIT_TOOL::RepeatDrawItem(), PL_SELECTION_TOOL::RequestSelection(), EE_SELECTION_TOOL::RequestSelection(), DRAWING_TOOL::Reset(), PCB_POINT_EDITOR::Reset(), COMMON_TOOLS::ResetLocalCoords(), ROUTER_TOOL::RouteSelected(), PCB_SELECTION_TOOL::selectCursor(), EE_SELECTION_TOOL::selectMultiple(), PL_SELECTION_TOOL::selectMultiple(), PCB_SELECTION_TOOL::selectMultiple(), EE_SELECTION_TOOL::SelectNode(), ZOOM_TOOL::selectRegion(), ALIGN_DISTRIBUTE_TOOL::selectTarget(), PICKER_TOOL::setControls(), PCB_PICKER_TOOL::setControls(), EE_POINT_EDITOR::setEditedPoint(), PL_POINT_EDITOR::setEditedPoint(), PCB_POINT_EDITOR::setEditedPoint(), SCH_DRAWING_TOOLS::SingleClickPlace(), SCH_DRAWING_TOOLS::TwoClickPlace(), SYMBOL_EDITOR_DRAWING_TOOLS::TwoClickPlace(), EE_POINT_EDITOR::updateEditedPoint(), PL_POINT_EDITOR::updateEditedPoint(), PCB_POINT_EDITOR::updateEditedPoint(), PCB_POINT_EDITOR::updateItem(), PL_EDIT_TOOL::updateModificationPoint(), and COMMON_TOOLS::ZoomCenter().

◆ Go()

template<class T >
void TOOL_INTERACTIVE::Go ( int(T::*)(const TOOL_EVENT &)  aStateFunc,
const TOOL_EVENT_LIST aConditions = TOOL_EVENTTC_ANYTA_ANY ) 
)
inherited

Define which state (aStateFunc) to go when a certain event arrives (aConditions).

No conditions means any event.

Definition at line 147 of file tool_interactive.h.

149{
150 TOOL_STATE_FUNC sptr = std::bind( aStateFunc, static_cast<T*>( this ), std::placeholders::_1 );
151
152 goInternal( sptr, aConditions );
153}
void goInternal(TOOL_STATE_FUNC &aState, const TOOL_EVENT_LIST &aConditions)
std::function< int(const TOOL_EVENT &)> TOOL_STATE_FUNC
Definition: tool_base.h:58

References TOOL_INTERACTIVE::goInternal().

Referenced by EDA_3D_CONTROLLER::setTransitions(), CVPCB_ASSOCIATION_TOOL::setTransitions(), CVPCB_CONTROL::setTransitions(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::setTransitions(), EE_INSPECTION_TOOL::setTransitions(), EE_POINT_EDITOR::setTransitions(), EE_SELECTION_TOOL::setTransitions(), SCH_DRAWING_TOOLS::setTransitions(), SCH_EDIT_TOOL::setTransitions(), SCH_EDITOR_CONTROL::setTransitions(), SCH_FIND_REPLACE_TOOL::setTransitions(), SCH_LINE_WIRE_BUS_TOOL::setTransitions(), SCH_MOVE_TOOL::setTransitions(), SCH_NAVIGATE_TOOL::setTransitions(), SYMBOL_EDITOR_CONTROL::setTransitions(), SYMBOL_EDITOR_DRAWING_TOOLS::setTransitions(), SYMBOL_EDITOR_EDIT_TOOL::setTransitions(), SYMBOL_EDITOR_MOVE_TOOL::setTransitions(), SYMBOL_EDITOR_PIN_TOOL::setTransitions(), GERBVIEW_CONTROL::setTransitions(), GERBVIEW_INSPECTION_TOOL::setTransitions(), GERBVIEW_SELECTION_TOOL::setTransitions(), COMMON_CONTROL::setTransitions(), COMMON_TOOLS::setTransitions(), PICKER_TOOL::setTransitions(), ZOOM_TOOL::setTransitions(), KICAD_MANAGER_CONTROL::setTransitions(), PL_DRAWING_TOOLS::setTransitions(), PL_EDIT_TOOL::setTransitions(), PL_EDITOR_CONTROL::setTransitions(), PL_POINT_EDITOR::setTransitions(), PL_SELECTION_TOOL::setTransitions(), AUTOPLACE_TOOL::setTransitions(), MICROWAVE_TOOL::setTransitions(), SCRIPTING_TOOL::setTransitions(), LENGTH_TUNER_TOOL::setTransitions(), ROUTER_TOOL::setTransitions(), BOARD_EDITOR_CONTROL::setTransitions(), BOARD_INSPECTION_TOOL::setTransitions(), setTransitions(), CONVERT_TOOL::setTransitions(), DRAWING_TOOL::setTransitions(), DRC_TOOL::setTransitions(), EDIT_TOOL::setTransitions(), FOOTPRINT_EDITOR_CONTROL::setTransitions(), GLOBAL_EDIT_TOOL::setTransitions(), GROUP_TOOL::setTransitions(), PAD_TOOL::setTransitions(), PCB_CONTROL::setTransitions(), PCB_PICKER_TOOL::setTransitions(), PCB_POINT_EDITOR::setTransitions(), PCB_SELECTION_TOOL::setTransitions(), PCB_VIEWER_TOOLS::setTransitions(), ALIGN_DISTRIBUTE_TOOL::setTransitions(), POSITION_RELATIVE_TOOL::setTransitions(), PROPERTIES_TOOL::setTransitions(), and ZONE_FILLER_TOOL::setTransitions().

◆ goInternal()

void TOOL_INTERACTIVE::goInternal ( TOOL_STATE_FUNC aState,
const TOOL_EVENT_LIST aConditions 
)
privateinherited

Definition at line 70 of file tool_interactive.cpp.

71{
72 m_toolMgr->ScheduleNextState( this, aState, aConditions );
73}
void ScheduleNextState(TOOL_BASE *aTool, TOOL_STATE_FUNC &aHandler, const TOOL_EVENT_LIST &aConditions)
Define a state transition.

References TOOL_BASE::m_toolMgr, and TOOL_MANAGER::ScheduleNextState().

Referenced by TOOL_INTERACTIVE::Go().

◆ Init()

bool BOARD_REANNOTATE_TOOL::Init ( )
overridevirtual

Init() is called once upon a registration of the tool.

Returns
True if the initialization went fine, false - otherwise.

Reimplemented from PCB_TOOL_BASE.

Definition at line 42 of file board_reannotate_tool.cpp.

43{
44 // Find the selection tool, so they can cooperate
46
47 return true;
48}
The selection tool: currently supports:

References TOOL_MANAGER::GetTool(), m_selectionTool, and TOOL_BASE::m_toolMgr.

◆ Is45Limited()

bool PCB_TOOL_BASE::Is45Limited ( ) const
virtualinherited

Should the tool use its 45° mode option?

Returns
True if set to use 45°

Definition at line 331 of file pcb_tool_base.cpp.

332{
333 SETTINGS_MANAGER& mgr = Pgm().GetSettingsManager();
334
335 if( frame()->IsType( FRAME_PCB_EDITOR ) )
336 return mgr.GetAppSettings<PCBNEW_SETTINGS>()->m_Use45DegreeLimit;
337 else
338 return mgr.GetAppSettings<FOOTPRINT_EDITOR_SETTINGS>()->m_Use45Limit;
339}
T * GetAppSettings(bool aLoadNow=true)
Returns a handle to the a given settings by type If the settings have already been loaded,...
@ FRAME_PCB_EDITOR
Definition: frame_type.h:40
KIWAY Kiway & Pgm(), KFCTL_STANDALONE
The global Program "get" accessor.
Definition: single_top.cpp:111

References PCB_TOOL_BASE::frame(), FRAME_PCB_EDITOR, SETTINGS_MANAGER::GetAppSettings(), and Pgm().

Referenced by DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawShape(), DRAWING_TOOL::DrawZone(), and ZONE_CREATE_HELPER::OnFirstPoint().

◆ IsBoardEditor()

bool PCB_TOOL_BASE::IsBoardEditor ( ) const
inlineinherited

Definition at line 109 of file pcb_tool_base.h.

109{ return m_isBoardEditor; }

References PCB_TOOL_BASE::m_isBoardEditor.

Referenced by BOARD_COMMIT::BOARD_COMMIT().

◆ IsFootprintEditor()

◆ IsToolActive()

bool TOOL_BASE::IsToolActive ( ) const
inherited

Definition at line 31 of file tool_base.cpp.

32{
34}
bool IsToolActive(TOOL_ID aId) const
Return true if a tool with given id is active (executing)

References TOOL_MANAGER::IsToolActive(), TOOL_BASE::m_toolId, and TOOL_BASE::m_toolMgr.

Referenced by EDIT_TOOL::Drag(), ROUTER_TOOL::handleLayerSwitch(), PCB_SELECTION_TOOL::Main(), BOARD_EDITOR_CONTROL::TrackWidthDec(), and BOARD_EDITOR_CONTROL::TrackWidthInc().

◆ ReannotateDuplicates()

int BOARD_REANNOTATE_TOOL::ReannotateDuplicates ( const PCB_SELECTION aSelectionToReannotate,
const std::vector< EDA_ITEM * > &  aAdditionalFootprints 
)

Definition at line 75 of file board_reannotate_tool.cpp.

77{
78 if( aSelectionToReannotate.Empty() )
79 return 0;
80
81 // 1. Build list of designators on the board & the additional footprints
82 FOOTPRINTS fpOnBoard = m_frame->GetBoard()->Footprints();
83 std::multimap<wxString, KIID> usedDesignatorsMap;
84
85 for( EDA_ITEM* item : aAdditionalFootprints )
86 {
87 if( item->Type() == PCB_FOOTPRINT_T )
88 fpOnBoard.push_back( static_cast<FOOTPRINT*>( item ) );
89
90 if( item->Type() == PCB_GROUP_T )
91 {
92 PCB_GROUP* group = static_cast<PCB_GROUP*>( item );
93
94 group->RunOnDescendants(
95 [&]( BOARD_ITEM* aGroupItem )
96 {
97 if( aGroupItem->Type() == PCB_FOOTPRINT_T )
98 fpOnBoard.push_back( static_cast<FOOTPRINT*>( aGroupItem ) );
99 } );
100 }
101 }
102
103 for( FOOTPRINT* fp : fpOnBoard )
104 usedDesignatorsMap.insert( { fp->GetReference(), fp->m_Uuid } );
105
106 // 2. Get a sorted list of footprints from the selection
107 FOOTPRINTS fpInSelection;
108
109 for( EDA_ITEM* item : aSelectionToReannotate )
110 {
111 if( item->Type() == PCB_FOOTPRINT_T )
112 fpInSelection.push_back( static_cast<FOOTPRINT*>( item ) );
113
114 if( item->Type() == PCB_GROUP_T )
115 {
116 PCB_GROUP* group = static_cast<PCB_GROUP*>( item );
117
118 group->RunOnDescendants(
119 [&]( BOARD_ITEM* aGroupItem )
120 {
121 if( aGroupItem->Type() == PCB_FOOTPRINT_T )
122 fpInSelection.push_back( static_cast<FOOTPRINT*>( aGroupItem ) );
123 } );
124 }
125 }
126
127 std::sort( fpInSelection.begin(), fpInSelection.end(),
128 []( const FOOTPRINT* aA, const FOOTPRINT* aB ) -> bool
129 {
130 int ii = StrNumCmp( aA->GetReference(), aB->GetReference(), true );
131
132 if( ii == 0 )
133 {
134 // Sort by position: x, then y
135 if( aA->GetPosition().y == aB->GetPosition().y )
136 {
137 if( aA->GetPosition().x == aB->GetPosition().x )
138 return aA->m_Uuid < aB->m_Uuid; // ensure a deterministic sort
139 else
140 return aA->GetPosition().x < aB->GetPosition().x;
141 }
142 else
143 {
144 return aA->GetPosition().y > aB->GetPosition().y;
145 }
146 }
147
148 return ii < 0;
149 } );
150
151 // 3. Iterate through the sorted list of footprints
152 for( FOOTPRINT* fp : fpInSelection )
153 {
154 wxString stem = UTIL::GetRefDesPrefix( fp->GetReference() );
155 int value = UTIL::GetRefDesNumber( fp->GetReference() );
156 bool duplicate = false;
157
158 while( usedDesignatorsMap.find( fp->GetReference() ) != usedDesignatorsMap.end() )
159 {
160 auto result = usedDesignatorsMap.equal_range( fp->GetReference() );
161
162 for( auto& it = result.first; it != result.second; it++ )
163 {
164 if( it->second != fp->m_Uuid )
165 {
166 duplicate = true;
167 break;
168 }
169 }
170
171 if( !duplicate )
172 break; // The only designator in the board with this reference is the selected one
173
174 if( value < 0 )
175 value = 1;
176 else
177 ++value;
178
179 fp->SetReference( stem + std::to_string( value ) );
180 }
181
182 if( duplicate )
183 usedDesignatorsMap.insert( { fp->GetReference(), fp->m_Uuid } );
184 }
185
186 return 0;
187}
FOOTPRINTS & Footprints()
Definition: board.h:307
A base class for most all the KiCad significant classes used in schematics and boards.
Definition: eda_item.h:85
KICAD_T Type() const
Returns the type of object.
Definition: eda_item.h:97
BOARD * GetBoard() const
A set of BOARD_ITEMs (i.e., without duplicates).
Definition: pcb_group.h:51
bool Empty() const
Checks if there is anything selected.
Definition: selection.h:109
wxString GetRefDesPrefix(const wxString &aRefDes)
Get the (non-numeric) prefix from a refdes - e.g.
int GetRefDesNumber(const wxString &aRefDes)
Get the numeric suffix from a refdes - e.g.
@ PCB_GROUP_T
class PCB_GROUP, a set of BOARD_ITEMs
Definition: typeinfo.h:115

References SELECTION::Empty(), BOARD::Footprints(), PCB_BASE_FRAME::GetBoard(), group, m_frame, PCB_FOOTPRINT_T, PCB_GROUP_T, and EDA_ITEM::Type().

Referenced by ReannotateDuplicatesInSelection().

◆ ReannotateDuplicatesInSelection()

int BOARD_REANNOTATE_TOOL::ReannotateDuplicatesInSelection ( )

Definition at line 65 of file board_reannotate_tool.cpp.

66{
68
69 if( selection.Empty() )
70 return 0;
71
72 return ReannotateDuplicates( selection, std::vector<EDA_ITEM*>() );
73}
int ReannotateDuplicates(const PCB_SELECTION &aSelectionToReannotate, const std::vector< EDA_ITEM * > &aAdditionalFootprints)
PCB_SELECTION & GetSelection()

References SELECTION::Empty(), PCB_SELECTION_TOOL::GetSelection(), m_selectionTool, ReannotateDuplicates(), and PCB_TOOL_BASE::selection().

◆ Reset()

void BOARD_REANNOTATE_TOOL::Reset ( RESET_REASON  aReason)
overridevirtual

Bring the tool to a known, initial state.

If the tool claimed anything from the model or the view, it must release it when its reset.

Parameters
aReasoncontains information about the reason of tool reset.

Reimplemented from PCB_TOOL_BASE.

Definition at line 51 of file board_reannotate_tool.cpp.

52{
53 m_frame = getEditFrame<PCB_EDIT_FRAME>();
54}

References m_frame.

◆ resetTransitions()

void TOOL_INTERACTIVE::resetTransitions ( )
privateinherited

Clear the current transition map and restores the default one created by setTransitions().

Definition at line 63 of file tool_interactive.cpp.

64{
67}
virtual void setTransitions()=0
This method is meant to be overridden in order to specify handlers for events.
void ClearTransitions(TOOL_BASE *aTool)
Clear the state transition map for a tool.

References TOOL_MANAGER::ClearTransitions(), TOOL_BASE::m_toolMgr, and TOOL_INTERACTIVE::setTransitions().

◆ RunMainStack()

void TOOL_INTERACTIVE::RunMainStack ( std::function< void()>  aFunc)
inherited

Call a function using the main stack.

Parameters
aFuncis the function to be calls.

Definition at line 87 of file tool_interactive.cpp.

88{
89 m_toolMgr->RunMainStack( this, std::move( aFunc ) );
90}
void RunMainStack(TOOL_BASE *aTool, std::function< void()> aFunc)

References TOOL_BASE::m_toolMgr, and TOOL_MANAGER::RunMainStack().

Referenced by DRAWING_TOOL::PlaceText().

◆ selection() [1/2]

PCB_SELECTION & PCB_TOOL_BASE::selection ( )
protectedinherited

Definition at line 323 of file pcb_tool_base.cpp.

324{
326
327 return selTool->GetSelection();
328}

References PCB_SELECTION_TOOL::GetSelection(), TOOL_MANAGER::GetTool(), and TOOL_BASE::m_toolMgr.

◆ selection() [2/2]

const PCB_SELECTION & PCB_TOOL_BASE::selection ( ) const
protectedinherited

Definition at line 315 of file pcb_tool_base.cpp.

316{
318
319 return selTool->GetSelection();
320}

References PCB_SELECTION_TOOL::GetSelection(), TOOL_MANAGER::GetTool(), and TOOL_BASE::m_toolMgr.

Referenced by BOARD_EDITOR_CONTROL::AssignNetclass(), AUTOPLACE_TOOL::autoplaceSelected(), BOARD_INSPECTION_TOOL::calculateSelectionRatsnest(), ROUTER_TOOL::CanInlineDrag(), EDIT_TOOL::ChangeTrackWidth(), PAD_TOOL::copyPadSettings(), EDIT_TOOL::copyToClipboard(), EDIT_TOOL::CreateArray(), DRC_TOOL::CrossProbe(), BOARD_EDITOR_CONTROL::doCrossProbePcbToSch(), BOARD_INSPECTION_TOOL::doHideRatsnestNet(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), EDIT_TOOL::Drag(), EDIT_TOOL::DragArcTrack(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), DRAWING_TOOL::drawShape(), DRAWING_TOOL::DrawZone(), EDIT_TOOL::Duplicate(), BOARD_EDITOR_CONTROL::EditFpInFpEditor(), PAD_TOOL::EditPad(), GROUP_TOOL::EnterGroup(), PAD_TOOL::EnumeratePads(), GLOBAL_EDIT_TOOL::ExchangeFootprints(), EDIT_TOOL::FilletLines(), EDIT_TOOL::FilletTracks(), EDIT_TOOL::Flip(), DRAWING_TOOL::getSourceZoneForAction(), GROUP_TOOL::Group(), BOARD_INSPECTION_TOOL::highlightNet(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), BOARD_INSPECTION_TOOL::InspectClearance(), BOARD_INSPECTION_TOOL::InspectConstraints(), DRAWING_TOOL::InteractivePlaceWithPreview(), BOARD_INSPECTION_TOOL::LocalRatsnestTool(), LENGTH_TUNER_TOOL::MainLoop(), ROUTER_TOOL::MainLoop(), EDIT_TOOL::Mirror(), BOARD_EDITOR_CONTROL::modifyLockSelected(), EDIT_TOOL::MoveExact(), PCB_POINT_EDITOR::OnSelectionChange(), EDIT_TOOL::PackAndMoveFootprints(), PAD_TOOL::pastePadProperties(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), LENGTH_TUNER_TOOL::performTuning(), PCB_CONTROL::placeBoardItems(), BOARD_EDITOR_CONTROL::PlaceFootprint(), DRAWING_TOOL::PlaceImportedGraphics(), DRAWING_TOOL::PlaceText(), POSITION_RELATIVE_TOOL::PositionRelative(), EDIT_TOOL::Properties(), PAD_TOOL::pushPadSettings(), ReannotateDuplicatesInSelection(), GROUP_TOOL::RemoveFromGroup(), GLOBAL_EDIT_TOOL::RemoveUnusedPads(), EDIT_TOOL::Rotate(), ROUTER_TOOL::RouteSelected(), DRAWING_TOOL::SetAnchor(), EDIT_TOOL::Swap(), BOARD_EDITOR_CONTROL::TrackWidthDec(), BOARD_EDITOR_CONTROL::TrackWidthInc(), GROUP_TOOL::Ungroup(), BOARD_INSPECTION_TOOL::UpdateLocalRatsnest(), PCB_CONTROL::UpdateMessagePanel(), BOARD_EDITOR_CONTROL::ViaSizeDec(), BOARD_EDITOR_CONTROL::ViaSizeInc(), BOARD_EDITOR_CONTROL::ZoneDuplicate(), ZONE_FILLER_TOOL::ZoneFill(), BOARD_EDITOR_CONTROL::ZoneMerge(), and ZONE_FILLER_TOOL::ZoneUnfill().

◆ SetContextMenu()

void TOOL_INTERACTIVE::SetContextMenu ( ACTION_MENU aMenu,
CONTEXT_MENU_TRIGGER  aTrigger = CMENU_BUTTON 
)
inherited

Assign a context menu and tells when it should be activated.

Parameters
aMenuis the menu to be assigned.
aTriggerdetermines conditions upon which the context menu is activated.

Definition at line 76 of file tool_interactive.cpp.

77{
78 if( aMenu )
79 aMenu->SetTool( this );
80 else
81 aTrigger = CMENU_OFF;
82
83 m_toolMgr->ScheduleContextMenu( this, aMenu, aTrigger );
84}
void SetTool(TOOL_INTERACTIVE *aTool)
Set a tool that is the creator of the menu.
void ScheduleContextMenu(TOOL_BASE *aTool, ACTION_MENU *aMenu, CONTEXT_MENU_TRIGGER aTrigger)
Set behavior of the tool's context popup menu.
@ CMENU_OFF
Definition: tool_event.h:149

References CMENU_OFF, TOOL_BASE::m_toolMgr, TOOL_MANAGER::ScheduleContextMenu(), and ACTION_MENU::SetTool().

Referenced by SELECTION_TOOL::doSelectionMenu(), TOOL_MENU::ShowContextMenu(), and SCH_LINE_WIRE_BUS_TOOL::UnfoldBus().

◆ SetIsBoardEditor()

void PCB_TOOL_BASE::SetIsBoardEditor ( bool  aEnabled)
inlineinherited

Definition at line 108 of file pcb_tool_base.h.

108{ m_isBoardEditor = aEnabled; }

References PCB_TOOL_BASE::m_isBoardEditor.

◆ SetIsFootprintEditor()

void PCB_TOOL_BASE::SetIsFootprintEditor ( bool  aEnabled)
inlineinherited

Function SetIsFootprintEditor()

Toggles edit footprint mode. When enabled, one may select parts of footprints individually (graphics, pads, etc.), so they can be modified.

Parameters
aEnableddecides if the mode should be enabled.

Definition at line 105 of file pcb_tool_base.h.

105{ m_isFootprintEditor = aEnabled; }

References PCB_TOOL_BASE::m_isFootprintEditor.

◆ setTransitions()

void BOARD_REANNOTATE_TOOL::setTransitions ( )
overrideprivatevirtual

This method is meant to be overridden in order to specify handlers for events.

It is called every time tool is reset or finished.

Reimplemented from PCB_TOOL_BASE.

Definition at line 190 of file board_reannotate_tool.cpp.

191{
193}
int ShowReannotateDialog(const TOOL_EVENT &aEvent)
static TOOL_ACTION boardReannotate
Definition: pcb_actions.h:489
void Go(int(T::*aStateFunc)(const TOOL_EVENT &), const TOOL_EVENT_LIST &aConditions=TOOL_EVENT(TC_ANY, TA_ANY))
Define which state (aStateFunc) to go when a certain event arrives (aConditions).

References PCB_ACTIONS::boardReannotate, TOOL_INTERACTIVE::Go(), and ShowReannotateDialog().

◆ ShowReannotateDialog()

int BOARD_REANNOTATE_TOOL::ShowReannotateDialog ( const TOOL_EVENT aEvent)

Definition at line 57 of file board_reannotate_tool.cpp.

58{
60 dialog.ShowModal();
61 return 0;
62}

References m_frame.

Referenced by setTransitions().

◆ view()

◆ Wait()

TOOL_EVENT * TOOL_INTERACTIVE::Wait ( const TOOL_EVENT_LIST aEventList = TOOL_EVENTTC_ANYTA_ANY ))
inherited

Suspend execution of the tool until an event specified in aEventList arrives.

No parameters means waiting for any event.

Definition at line 57 of file tool_interactive.cpp.

58{
59 return m_toolMgr->ScheduleWait( this, aEventList );
60}
TOOL_EVENT * ScheduleWait(TOOL_BASE *aTool, const TOOL_EVENT_LIST &aConditions)
Pause execution of a given tool until one or more events matching aConditions arrives.

References TOOL_BASE::m_toolMgr, and TOOL_MANAGER::ScheduleWait().

Referenced by SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), SELECTION_TOOL::doSelectionMenu(), EDIT_TOOL::DragArcTrack(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), SCH_DRAWING_TOOLS::DrawShape(), SYMBOL_EDITOR_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), DRAWING_TOOL::drawShape(), SCH_DRAWING_TOOLS::DrawSheet(), DRAWING_TOOL::DrawZone(), PAD_TOOL::EnumeratePads(), ROUTER_TOOL::InlineDrag(), DRAWING_TOOL::InteractivePlaceWithPreview(), EDA_3D_CONTROLLER::Main(), CVPCB_CONTROL::Main(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::Main(), EE_POINT_EDITOR::Main(), EE_SELECTION_TOOL::Main(), SCH_MOVE_TOOL::Main(), SYMBOL_EDITOR_MOVE_TOOL::Main(), GERBVIEW_SELECTION_TOOL::Main(), PICKER_TOOL::Main(), ZOOM_TOOL::Main(), PL_EDIT_TOOL::Main(), PL_POINT_EDITOR::Main(), PL_SELECTION_TOOL::Main(), PCB_PICKER_TOOL::Main(), PCB_SELECTION_TOOL::Main(), LENGTH_TUNER_TOOL::MainLoop(), ROUTER_TOOL::MainLoop(), GERBVIEW_INSPECTION_TOOL::MeasureTool(), PCB_VIEWER_TOOLS::MeasureTool(), PCB_POINT_EDITOR::OnSelectionChange(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), LENGTH_TUNER_TOOL::performTuning(), EDIT_TOOL::pickReferencePoint(), SYMBOL_EDITOR_DRAWING_TOOLS::PlaceAnchor(), BOARD_EDITOR_CONTROL::PlaceFootprint(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), SCH_DRAWING_TOOLS::PlaceSymbol(), DRAWING_TOOL::PlaceText(), EE_SELECTION_TOOL::selectMultiple(), PL_SELECTION_TOOL::selectMultiple(), PCB_SELECTION_TOOL::selectMultiple(), PCB_SELECTION_TOOL::selectPoint(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), ZOOM_TOOL::selectRegion(), DRAWING_TOOL::SetAnchor(), SCH_DRAWING_TOOLS::SingleClickPlace(), SCH_DRAWING_TOOLS::TwoClickPlace(), SYMBOL_EDITOR_DRAWING_TOOLS::TwoClickPlace(), and SCH_LINE_WIRE_BUS_TOOL::UnfoldBus().

Member Data Documentation

◆ m_frame

PCB_EDIT_FRAME* BOARD_REANNOTATE_TOOL::m_frame
private

Definition at line 54 of file board_reannotate_tool.h.

Referenced by ReannotateDuplicates(), Reset(), and ShowReannotateDialog().

◆ m_isBoardEditor

bool PCB_TOOL_BASE::m_isBoardEditor
protectedinherited

◆ m_isFootprintEditor

◆ m_menu

TOOL_MENU TOOL_INTERACTIVE::m_menu
protectedinherited

The functions below are not yet implemented - their interface may change.

Definition at line 125 of file tool_interactive.h.

Referenced by SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), PCB_TOOL_BASE::doInteractiveItemPlacement(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawDimension(), MICROWAVE_TOOL::drawMicrowaveInductor(), SCH_DRAWING_TOOLS::DrawShape(), SYMBOL_EDITOR_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), DRAWING_TOOL::drawShape(), SCH_DRAWING_TOOLS::DrawSheet(), DRAWING_TOOL::DrawZone(), PAD_TOOL::EnumeratePads(), TOOL_INTERACTIVE::GetToolMenu(), EDA_3D_CONTROLLER::Init(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::Init(), EE_SELECTION_TOOL::Init(), EE_TOOL_BASE< T >::Init(), SCH_DRAWING_TOOLS::Init(), SCH_EDIT_TOOL::Init(), SCH_LINE_WIRE_BUS_TOOL::Init(), SYMBOL_EDITOR_CONTROL::Init(), SYMBOL_EDITOR_DRAWING_TOOLS::Init(), GERBVIEW_SELECTION_TOOL::Init(), PICKER_TOOL::Init(), ZOOM_TOOL::Init(), PL_DRAWING_TOOLS::Init(), PL_EDIT_TOOL::Init(), PL_SELECTION_TOOL::Init(), LENGTH_TUNER_TOOL::Init(), ROUTER_TOOL::Init(), BOARD_EDITOR_CONTROL::Init(), DRAWING_TOOL::Init(), FOOTPRINT_EDITOR_CONTROL::Init(), PAD_TOOL::Init(), PCB_SELECTION_TOOL::Init(), PCB_TOOL_BASE::Init(), PCB_VIEWER_TOOLS::Init(), DRAWING_TOOL::InteractivePlaceWithPreview(), EDA_3D_CONTROLLER::Main(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::Main(), EE_SELECTION_TOOL::Main(), SCH_MOVE_TOOL::Main(), SYMBOL_EDITOR_MOVE_TOOL::Main(), GERBVIEW_SELECTION_TOOL::Main(), PICKER_TOOL::Main(), ZOOM_TOOL::Main(), PL_EDIT_TOOL::Main(), PL_SELECTION_TOOL::Main(), PCB_PICKER_TOOL::Main(), PCB_SELECTION_TOOL::Main(), LENGTH_TUNER_TOOL::MainLoop(), ROUTER_TOOL::MainLoop(), GERBVIEW_INSPECTION_TOOL::MeasureTool(), PCB_VIEWER_TOOLS::MeasureTool(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), LENGTH_TUNER_TOOL::performTuning(), SYMBOL_EDITOR_DRAWING_TOOLS::PlaceAnchor(), BOARD_EDITOR_CONTROL::PlaceFootprint(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), SCH_DRAWING_TOOLS::PlaceSymbol(), DRAWING_TOOL::PlaceText(), DRAWING_TOOL::SetAnchor(), SCH_DRAWING_TOOLS::SingleClickPlace(), SCH_DRAWING_TOOLS::TwoClickPlace(), and SYMBOL_EDITOR_DRAWING_TOOLS::TwoClickPlace().

◆ m_selectionTool

PCB_SELECTION_TOOL* BOARD_REANNOTATE_TOOL::m_selectionTool
private

Definition at line 53 of file board_reannotate_tool.h.

Referenced by Init(), and ReannotateDuplicatesInSelection().

◆ m_toolId

TOOL_ID TOOL_BASE::m_toolId
protectedinherited

Name of the tool.

Names are expected to obey the format application.ToolName (eg. pcbnew.InteractiveSelection).

Definition at line 210 of file tool_base.h.

Referenced by TOOL_INTERACTIVE::Activate(), TOOL_BASE::GetId(), and TOOL_BASE::IsToolActive().

◆ m_toolMgr

TOOL_MANAGER* TOOL_BASE::m_toolMgr
protectedinherited

Definition at line 215 of file tool_base.h.

Referenced by TOOL_INTERACTIVE::Activate(), SELECTION_TOOL::AddItemsToSel(), SELECTION_TOOL::AddItemToSel(), SCH_MOVE_TOOL::AlignElements(), SCH_EDITOR_CONTROL::AssignNetclass(), BOARD_EDITOR_CONTROL::AssignNetclass(), CVPCB_ASSOCIATION_TOOL::Associate(), TOOL_BASE::attachManager(), SCH_EDIT_TOOL::AutoplaceFields(), EE_SELECTION_TOOL::autostartEvent(), SCH_EDIT_TOOL::BreakWire(), BOARD_INSPECTION_TOOL::calculateSelectionRatsnest(), ROUTER_TOOL::CanInlineDrag(), SCH_EDITOR_CONTROL::ChangeLineMode(), SCH_EDIT_TOOL::ChangeTextType(), EDIT_TOOL::ChangeTrackWidth(), SCH_EDIT_TOOL::CleanupSheetPins(), GERBVIEW_CONTROL::ClearAllLayers(), SCH_EDITOR_CONTROL::ClearHighlight(), BOARD_INSPECTION_TOOL::ClearHighlight(), GERBVIEW_SELECTION_TOOL::clearSelection(), PL_SELECTION_TOOL::ClearSelection(), EE_SELECTION_TOOL::ClearSelection(), PCB_SELECTION_TOOL::ClearSelection(), SCH_EDIT_TOOL::ConvertDeMorgan(), SYMBOL_EDITOR_EDIT_TOOL::Copy(), PL_EDIT_TOOL::Copy(), PAD_TOOL::copyPadSettings(), EDIT_TOOL::copyToClipboard(), EDIT_TOOL::CreateArray(), MICROWAVE_TOOL::createInductorBetween(), EE_INSPECTION_TOOL::CrossProbe(), DRC_TOOL::CrossProbe(), COMMON_TOOLS::CursorControl(), SCH_EDITOR_CONTROL::Cut(), SCH_EDIT_TOOL::DeleteItemCursor(), SYMBOL_EDITOR_EDIT_TOOL::DeleteItemCursor(), PL_EDIT_TOOL::DeleteItemCursor(), PCB_CONTROL::DeleteItemCursor(), EDIT_TOOL::DeleteItems(), SCH_EDITOR_CONTROL::doCopy(), BOARD_EDITOR_CONTROL::doCrossProbePcbToSch(), SCH_EDITOR_CONTROL::doCrossProbeSchToPcb(), SCH_EDIT_TOOL::DoDelete(), SYMBOL_EDITOR_EDIT_TOOL::DoDelete(), SCH_LINE_WIRE_BUS_TOOL::doDrawSegments(), BOARD_INSPECTION_TOOL::doHideRatsnestNet(), PCB_TOOL_BASE::doInteractiveItemPlacement(), EDIT_TOOL::doMoveSelection(), PCB_SELECTION_TOOL::doSyncSelection(), SCH_LINE_WIRE_BUS_TOOL::doUnfoldBus(), COMMON_TOOLS::doZoomInOut(), COMMON_TOOLS::doZoomToPreset(), EDIT_TOOL::Drag(), DRAWING_TOOL::DrawArc(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawCircle(), DRAWING_TOOL::DrawDimension(), DRAWING_TOOL::DrawRectangle(), SCH_LINE_WIRE_BUS_TOOL::DrawSegments(), SCH_DRAWING_TOOLS::DrawShape(), SYMBOL_EDITOR_DRAWING_TOOLS::DrawShape(), PL_DRAWING_TOOLS::DrawShape(), DRAWING_TOOL::drawShape(), SCH_DRAWING_TOOLS::DrawSheet(), DRAWING_TOOL::DrawZone(), BOARD_EDITOR_CONTROL::DrillOrigin(), SYMBOL_EDITOR_EDIT_TOOL::Duplicate(), EDIT_TOOL::Duplicate(), SCH_EDIT_TOOL::EditField(), SCH_EDIT_TOOL::editFieldText(), BOARD_EDITOR_CONTROL::EditFpInFpEditor(), PAD_TOOL::EditPad(), SYMBOL_EDITOR_EDIT_TOOL::editShapeProperties(), SYMBOL_EDITOR_EDIT_TOOL::editSymbolProperties(), SCH_EDITOR_CONTROL::EditWithSymbolEditor(), PCB_SELECTION_TOOL::EnterGroup(), GROUP_TOOL::EnterGroup(), SCH_NAVIGATE_TOOL::EnterSheet(), PAD_TOOL::EnumeratePads(), EE_INSPECTION_TOOL::ExcludeMarker(), PCB_SELECTION_TOOL::ExitGroup(), PCB_SELECTION_TOOL::expandConnection(), PAD_TOOL::explodePad(), PCB_SELECTION_TOOL::filterSelection(), PCB_SELECTION_TOOL::FindItem(), SCH_EDITOR_CONTROL::FindSymbolAndItem(), SCH_LINE_WIRE_BUS_TOOL::finishSegments(), EDIT_TOOL::Flip(), EDIT_TOOL::GetAndPlace(), TOOL_BASE::GetManager(), TOOL_BASE::getModelInt(), DRAWING_TOOL::getSourceZoneForAction(), TOOL_BASE::getToolHolderInt(), TOOL_BASE::getView(), TOOL_BASE::getViewControls(), TOOL_INTERACTIVE::goInternal(), PCB_SELECTION_TOOL::grabUnconnected(), COMMON_TOOLS::GridNext(), COMMON_TOOLS::GridPreset(), COMMON_TOOLS::GridPrev(), PCB_CONTROL::GridSetOrigin(), GROUP_TOOL::Group(), GERBVIEW_CONTROL::HighlightControl(), BOARD_INSPECTION_TOOL::HighlightItem(), SCH_EDITOR_CONTROL::HighlightNet(), BOARD_INSPECTION_TOOL::HighlightNet(), BOARD_INSPECTION_TOOL::highlightNet(), SCH_EDITOR_CONTROL::HighlightNetCursor(), PL_EDIT_TOOL::ImportDrawingSheetContent(), FOOTPRINT_EDITOR_CONTROL::ImportFootprint(), EE_TOOL_BASE< T >::Init(), SCH_EDIT_TOOL::Init(), SYMBOL_EDITOR_CONTROL::Init(), SYMBOL_EDITOR_EDIT_TOOL::Init(), PL_DRAWING_TOOLS::Init(), PL_EDIT_TOOL::Init(), PL_POINT_EDITOR::Init(), ROUTER_TOOL::Init(), BOARD_EDITOR_CONTROL::Init(), BOARD_INSPECTION_TOOL::Init(), Init(), CONVERT_TOOL::Init(), DRAWING_TOOL::Init(), EDIT_TOOL::Init(), GLOBAL_EDIT_TOOL::Init(), GROUP_TOOL::Init(), PAD_TOOL::Init(), PCB_POINT_EDITOR::Init(), PCB_SELECTION_TOOL::Init(), ALIGN_DISTRIBUTE_TOOL::Init(), POSITION_RELATIVE_TOOL::Init(), ROUTER_TOOL::InlineBreakTrack(), ROUTER_TOOL::InlineDrag(), BOARD_INSPECTION_TOOL::InspectClearance(), BOARD_INSPECTION_TOOL::InspectConstraints(), DRAWING_TOOL::InteractivePlaceWithPreview(), EDIT_TOOL::invokeInlineRouter(), EDIT_TOOL::isRouterActive(), TOOL_BASE::IsToolActive(), GROUP_TOOL::LeaveGroup(), BOARD_INSPECTION_TOOL::LocalRatsnestTool(), EDA_3D_CONTROLLER::Main(), CVPCB_CONTROL::Main(), CVPCB_FOOTPRINT_VIEWER_SELECTION_TOOL::Main(), EE_SELECTION_TOOL::Main(), SCH_MOVE_TOOL::Main(), SYMBOL_EDITOR_MOVE_TOOL::Main(), GERBVIEW_SELECTION_TOOL::Main(), PL_EDIT_TOOL::Main(), PL_SELECTION_TOOL::Main(), PCB_PICKER_TOOL::Main(), PCB_SELECTION_TOOL::Main(), LENGTH_TUNER_TOOL::MainLoop(), ROUTER_TOOL::MainLoop(), PCB_VIEWER_TOOLS::MeasureTool(), SCH_EDIT_TOOL::Mirror(), SYMBOL_EDITOR_EDIT_TOOL::Mirror(), EDIT_TOOL::Mirror(), BOARD_EDITOR_CONTROL::modifyLockSelected(), EDIT_TOOL::MoveExact(), SCH_EDITOR_CONTROL::NextLineMode(), SYMBOL_EDITOR_CONTROL::OnDeMorgan(), SELECTION_TOOL::onDisambiguationExpire(), COMMON_TOOLS::OnGridChanged(), PCB_POINT_EDITOR::OnSelectionChange(), SCH_EDITOR_CONTROL::Paste(), SYMBOL_EDITOR_EDIT_TOOL::Paste(), PL_EDIT_TOOL::Paste(), PAD_TOOL::pastePadProperties(), ROUTER_TOOL::performDragging(), ROUTER_TOOL::performRouting(), GROUP_TOOL::PickNewMember(), EDIT_TOOL::pickReferencePoint(), SYMBOL_EDITOR_EDIT_TOOL::PinTable(), PCB_CONTROL::placeBoardItems(), BOARD_EDITOR_CONTROL::PlaceFootprint(), SCH_DRAWING_TOOLS::PlaceImage(), DRAWING_TOOL::PlaceImage(), DRAWING_TOOL::PlaceImportedGraphics(), PL_DRAWING_TOOLS::PlaceItem(), SCH_DRAWING_TOOLS::PlaceSymbol(), DRAWING_TOOL::PlaceText(), GERBVIEW_CONTROL::Print(), PCB_CONTROL::Print(), SCH_EDIT_TOOL::Properties(), SYMBOL_EDITOR_EDIT_TOOL::Properties(), EDIT_TOOL::Properties(), PAD_TOOL::pushPadSettings(), EDIT_TOOL::rebuildConnectivity(), ZONE_FILLER_TOOL::rebuildConnectivity(), EE_SELECTION_TOOL::RebuildSelection(), PAD_TOOL::RecombinePad(), SCH_EDITOR_CONTROL::Redo(), SYMBOL_EDITOR_EDIT_TOOL::Redo(), POSITION_RELATIVE_TOOL::RelativeItemSelectionMove(), EDIT_TOOL::Remove(), PCB_POINT_EDITOR::removeCorner(), GROUP_TOOL::RemoveFromGroup(), SELECTION_TOOL::RemoveItemFromSel(), SELECTION_TOOL::RemoveItemsFromSel(), SCH_EDIT_TOOL::RepeatDrawItem(), SYMBOL_EDITOR_DRAWING_TOOLS::RepeatDrawItem(), PCB_SELECTION_TOOL::RequestSelection(), EE_SELECTION_TOOL::RequestSelection(), EDA_3D_CONTROLLER::Reset(), COMMON_TOOLS::Reset(), PNS::TOOL_BASE::Reset(), PAD_TOOL::Reset(), COMMON_TOOLS::ResetLocalCoords(), TOOL_INTERACTIVE::resetTransitions(), SCH_EDITOR_CONTROL::Revert(), SCH_EDIT_TOOL::Rotate(), SYMBOL_EDITOR_EDIT_TOOL::Rotate(), EDIT_TOOL::Rotate(), ROUTER_TOOL::RouteSelected(), TOOL_INTERACTIVE::RunMainStack(), DRC_TOOL::RunTests(), EE_SELECTION_TOOL::Selectable(), EE_SELECTION_TOOL::SelectAll(), PCB_SELECTION_TOOL::SelectAll(), EE_SELECTION_TOOL::SelectConnection(), PCB_TOOL_BASE::selection(), COMMON_TOOLS::SelectionTool(), GERBVIEW_SELECTION_TOOL::SelectItem(), GERBVIEW_SELECTION_TOOL::SelectItems(), EE_SELECTION_TOOL::selectMultiple(), PL_SELECTION_TOOL::selectMultiple(), PCB_SELECTION_TOOL::selectMultiple(), PCB_SELECTION_TOOL::selectNet(), GERBVIEW_SELECTION_TOOL::selectPoint(), PL_SELECTION_TOOL::SelectPoint(), PCB_SELECTION_TOOL::selectPoint(), EE_SELECTION_TOOL::selectPoint(), POSITION_RELATIVE_TOOL::SelectPositionRelativeItem(), PCB_SELECTION_TOOL::selectSameSheet(), PCB_SELECTION_TOOL::selectSheetContents(), DRAWING_TOOL::SetAnchor(), TOOL_INTERACTIVE::SetContextMenu(), EDA_3D_CONTROLLER::SetMaterial(), DRC_TOOL::ShowDRCDialog(), SCH_DRAWING_TOOLS::SingleClickPlace(), SCH_EDIT_TOOL::Swap(), EE_SELECTION_TOOL::SyncSelection(), COMMON_TOOLS::ToggleCursor(), COMMON_TOOLS::ToggleCursorStyle(), EDA_3D_CONTROLLER::ToggleVisibility(), BOARD_EDITOR_CONTROL::TrackWidthDec(), BOARD_EDITOR_CONTROL::TrackWidthInc(), SCH_MOVE_TOOL::trimDanglingLines(), SCH_DRAWING_TOOLS::TwoClickPlace(), SYMBOL_EDITOR_DRAWING_TOOLS::TwoClickPlace(), SCH_EDITOR_CONTROL::Undo(), SYMBOL_EDITOR_EDIT_TOOL::Undo(), GROUP_TOOL::Ungroup(), PCB_SELECTION_TOOL::unrouteSelected(), GERBVIEW_SELECTION_TOOL::UnselectItem(), GERBVIEW_SELECTION_TOOL::UnselectItems(), PNS::TOOL_BASE::updateEndItem(), BOARD_INSPECTION_TOOL::UpdateLocalRatsnest(), EE_INSPECTION_TOOL::UpdateMessagePanel(), GERBVIEW_CONTROL::UpdateMessagePanel(), PL_EDITOR_CONTROL::UpdateMessagePanel(), PCB_CONTROL::UpdateMessagePanel(), EDIT_TOOL::updateModificationPoint(), EE_POINT_EDITOR::updateParentItem(), PNS::TOOL_BASE::updateStartItem(), BOARD_EDITOR_CONTROL::ViaSizeDec(), BOARD_EDITOR_CONTROL::ViaSizeInc(), TOOL_INTERACTIVE::Wait(), BOARD_EDITOR_CONTROL::ZoneDuplicate(), and BOARD_EDITOR_CONTROL::ZoneMerge().

◆ m_toolName

std::string TOOL_BASE::m_toolName
protectedinherited

Definition at line 214 of file tool_base.h.

Referenced by TOOL_BASE::GetName().

◆ m_type

TOOL_TYPE TOOL_BASE::m_type
protectedinherited

Unique identifier for the tool, assigned by a TOOL_MANAGER instance.

Definition at line 207 of file tool_base.h.

Referenced by TOOL_BASE::GetType().


The documentation for this class was generated from the following files: