#include <list>
#include <fstream>
#include <exception>
#include <string>
#include <cmath>

Classes
struct	IDF_ERROR

class	IDF_NOTE
	An entry in the NOTE section of an IDF file. More...

class	IDF_DRILL_DATA
	A drilled hole. More...

class	IDF_POINT
	A point as used by the various IDF related classes. More...

class	IDF_SEGMENT
	A segment as used in IDFv3 outlines. More...

class	IDF_OUTLINE
	A segment and winding information for an IDF outline. More...

Namespaces
namespace	IDF3

Macros
#define	MIN_ANG (0.01)

Enumerations
enum class	IDF3::FILE_STATE { IDF3::FILE_START = 0 , IDF3::FILE_HEADER , IDF3::FILE_OUTLINE , IDF3::FILE_PLACEMENT , IDF3::FILE_INVALID , IDF3::FILE_ERROR }
	State values for the IDF parser's input. More...

enum class	IDF3::IDF_VERSION { IDF3::IDF_V2 = 0 , IDF3::IDF_V3 }
	The supported IDF versions (3.0 and 2.0 ONLY). More...

enum class	IDF3::KEY_OWNER { IDF3::UNOWNED = 0 , IDF3::MCAD , IDF3::ECAD }
	The type of CAD which has ownership an object. More...

enum class	IDF3::KEY_HOLETYPE { IDF3::PIN = 0 , IDF3::VIA , IDF3::MTG , IDF3::TOOL , IDF3::OTHER }
	The purpose of an IDF hole. More...

enum class	IDF3::KEY_PLATING { IDF3::PTH = 0 , IDF3::NPTH }
	The plating condition of a hole. More...

enum class	IDF3::KEY_REFDES { IDF3::BOARD = 0 , IDF3::NOREFDES , IDF3::PANEL , IDF3::REFDES }
	A component's Reference Designator. More...

enum class	IDF3::CAD_TYPE { IDF3::CAD_ELEC = 0 , IDF3::CAD_MECH , IDF3::CAD_INVALID }
	The class of CAD program which is opening or modifying a file. More...

enum class	IDF3::IDF_LAYER { IDF3::LYR_TOP = 0 , IDF3::LYR_BOTTOM , IDF3::LYR_BOTH , IDF3::LYR_INNER , IDF3::LYR_ALL , IDF3::LYR_INVALID }
	The various IDF layer classes and groupings. More...

enum class	IDF3::OUTLINE_TYPE { IDF3::OTLN_BOARD = 0 , IDF3::OTLN_OTHER , IDF3::OTLN_PLACE , IDF3::OTLN_ROUTE , IDF3::OTLN_PLACE_KEEPOUT , IDF3::OTLN_ROUTE_KEEPOUT , IDF3::OTLN_VIA_KEEPOUT , IDF3::OTLN_GROUP_PLACE , IDF3::OTLN_COMPONENT , IDF3::OTLN_INVALID }
	The class of outline. More...

enum class	IDF3::COMP_TYPE { IDF3::COMP_ELEC = 0 , IDF3::COMP_MECH , IDF3::COMP_INVALID }
	Whether a component is a mechanical or electrical part. More...

enum class	IDF3::IDF_UNIT { IDF3::UNIT_MM = 0 , IDF3::UNIT_THOU , IDF3::UNIT_TNM , IDF3::UNIT_INVALID }
	The native unit of the board and of component outlines. More...

enum class	IDF3::IDF_PLACEMENT { IDF3::PS_UNPLACED = 0 , IDF3::PS_PLACED , IDF3::PS_MCAD , IDF3::PS_ECAD , IDF3::PS_INVALID }
	The placement status of a component. More...

Functions
double	IDF3::CalcAngleRad (const IDF_POINT &aStartPoint, const IDF_POINT &aEndPoint)
	Calculate the angle (radians) between the horizon and the segment aStartPoint to aEndPoint.

double	IDF3::CalcAngleDeg (const IDF_POINT &aStartPoint, const IDF_POINT &aEndPoint)
	Calculate the angle (degrees) between the horizon and the segment aStartPoint to aEndPoint.

void	IDF3::GetOutline (std::list< IDF_SEGMENT * > &aLines, IDF_OUTLINE &aOutline)
	Take contiguous elements from 'aLines' and stuffs them into 'aOutline'; elements put into the outline are deleted from aLines.

Macro Definition Documentation

◆ MIN_ANG

#define MIN_ANG (0.01)

Definition at line 35 of file idf_common.h.

Referenced by IDF3::GetOutline(), IDF_SEGMENT::IDF_SEGMENT(), IDF_OUTLINE::IsCCW(), IDF_SEGMENT::IsCircle(), IDF_OUTLINE::push(), BOARD_OUTLINE::readOutlines(), IDF_SEGMENT::SwapEnds(), and BOARD_OUTLINE::writeOutline().

Classes

Namespaces

Macros

Enumerations

Functions

Macro Definition Documentation

◆ MIN_ANG