KiCad PCB EDA Suite
eserie_help.h
Go to the documentation of this file.
1 // Do not edit this file, it is autogenerated by CMake from the .md file
2 _HKI( "E-series are defined in IEC 60063.\n"
3 "\n"
4 "Available values are approximately equally spaced in a logarithmic scale.\n"
5 "\n"
6 " E24(5%): 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1\n"
7 " E12(10%): 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2\n"
8 " E6(20%): 1.0 - 1.5 - 2.2 - 3.3 - 4.7 - 6.8 -\n"
9 " E3(50%): 1.0 - - - 2.2 - - - 4.7 - - -\n"
10 " E1 : 1.0 - - - - - - - - - - -\n"
11 "\n"
12 "- This calculator finds combinations of standard E-series (between 10Ω and 1MΩ) to create arbitrary values.\n"
13 "- You can enter the required resistance from 0.0025 to 4000 kΩ.\n"
14 "- Solutions using up to 4 components are given.\n"
15 "\n"
16 "The requested value is always excluded from the solution set.<br>\n"
17 "Optionally up to two additional values can be excluded in case of component availability problems.\n"
18 "\n"
19 "Solutions are given in the following formats:\n"
20 "\n"
21 " R1 + R2 +...+ Rn resistors in series\n"
22 " R1 | R2 |...| Rn resistors in parallel\n"
23 " R1 + (R2|R3)... any combination of the above\n"
24 "" );
_HKI("E-series are defined in IEC 60063.\n" "\n" "Available values are approximately equally spaced in a logarithmic scale.\n" "\n" " E24(5%): 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1\n" " E12(10%): 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2\n" " E6(20%): 1.0 - 1.5 - 2.2 - 3.3 - 4.7 - 6.8 -\n" " E3(50%): 1.0 - - - 2.2 - - - 4.7 - - -\n" " E1 : 1.0 - - - - - - - - - - -\n" "\n" "- This calculator finds combinations of standard E-series (between 10Ω and 1MΩ) to create arbitrary values.\n" "- You can enter the required resistance from 0.0025 to 4000 kΩ.\n" "- Solutions using up to 4 components are given.\n" "\n" "The requested value is always excluded from the solution set.<br>\n" "Optionally up to two additional values can be excluded in case of component availability problems.\n" "\n" "Solutions are given in the following formats:\n" "\n" " R1 + R2 +...+ Rn resistors in series\n" " R1 | R2 |...| Rn resistors in parallel\n" " R1 + (R2|R3)... any combination of the above\n" "")