KiCad PCB EDA Suite: TRACK Class Reference

Referenced by FOOTPRINT_VIEWER_FRAME::AddFootprintToPCB(), PNS_KICAD_IFACE::AddItem(), SCH_EDIT_FRAME::AddItemToScreenAndUndoList(), SCH_MOVE_TOOL::AlignElements(), FOOTPRINT::BuildPolyCourtyards(), EDA_ITEM::ClearBrightened(), EDA_ITEM::ClearEditFlags(), EDA_ITEM::ClearSelected(), EDA_ITEM::ClearTempFlags(), ConvertOutlineToPolygon(), SCH_EDIT_FRAME::ConvertPart(), SYMBOL_EDITOR_EDIT_TOOL::Copy(), FOOTPRINT_EDITOR_CONTROL::CreateFootprint(), SYMBOL_EDITOR_PIN_TOOL::CreateImagePins(), MICROWAVE_TOOL::createMicrowaveInductor(), DIALOG_PAD_PROPERTIES::DIALOG_PAD_PROPERTIES(), KIGFX::SCH_PAINTER::draw(), SYMBOL_EDITOR_EDIT_TOOL::Duplicate(), SCH_ITEM::Duplicate(), PCB_EDIT_FRAME::ExchangeFootprint(), PCB_SELECTION_TOOL::ExitGroup(), SYMBOL_EDIT_FRAME::GetSymbolFromRedoList(), SYMBOL_EDIT_FRAME::GetSymbolFromUndoList(), FOOTPRINT_EDITOR_CONTROL::ImportFootprint(), FOOTPRINT_EDIT_FRAME::LoadFootprintFromBoard(), FOOTPRINT_EDIT_FRAME::LoadFootprintFromLibrary(), EE_SELECTION_TOOL::Main(), EE_SELECTION_TOOL::narrowSelection(), FOOTPRINT_EDITOR_CONTROL::NewFootprint(), FOOTPRINT_EDIT_FRAME::OpenProjectFiles(), PCB_BASE_FRAME::PlaceFootprint(), SYMBOL_EDITOR_PIN_TOOL::PlacePin(), BOARD_COMMIT::Push(), PCB_SELECTION_TOOL::RebuildSelection(), SCH_EDIT_TOOL::RepeatDrawItem(), SYMBOL_EDIT_FRAME::RollbackSymbolFromUndo(), SCH_EDIT_FRAME::SaveCopyForRepeatItem(), FOOTPRINT_EDIT_FRAME::SaveFootprintToBoard(), SCH_SEXPR_PLUGIN_CACHE::savePin(), SCH_EDIT_FRAME::SelectUnit(), DIALOG_SYMBOL_PROPERTIES::TransferDataFromWindow(), DIALOG_PAD_PROPERTIES::TransferDataFromWindow(), and SCH_DRAWING_TOOLS::TwoClickPlace().

STATUS_FLAGS m_flags

Definition: eda_item.h:531

References EDA_ITEM::m_flags.

◆ ClearSelected()

void EDA_ITEM::ClearSelected ( )

inlineinherited

Definition at line 182 of file eda_item.h.

182 { ClearFlags( SELECTED ); }

SELECTED

#define SELECTED

Definition: eda_item.h:114

EDA_ITEM::ClearFlags

void ClearFlags(STATUS_FLAGS aMask=EDA_ITEM_ALL_FLAGS)

Definition: eda_item.h:204

References EDA_ITEM::ClearFlags(), and SELECTED.

Referenced by PCB_POINT_EDITOR::addCorner(), EDIT_TOOL::Duplicate(), ARRAY_CREATOR::Invoke(), LIB_PART::LIB_PART(), EE_TOOL_BASE< SCH_BASE_FRAME >::saveCopyInUndoList(), PL_SELECTION_TOOL::unhighlight(), EE_SELECTION_TOOL::unhighlight(), PCB_SELECTION_TOOL::unhighlightInternal(), and GERBVIEW_SELECTION_TOOL::unselectVisually().

◆ ClearTempFlags()

void EDA_ITEM::ClearTempFlags ( )

inlineinherited

Definition at line 216 of file eda_item.h.

     {
         ClearFlags( STARTPOINT | ENDPOINT | CANDIDATE | TEMP_SELECTED | IS_LINKED | SKIP_STRUCT |
                     DO_NOT_DRAW );
     }

References CANDIDATE, EDA_ITEM::ClearFlags(), DO_NOT_DRAW, ENDPOINT, IS_LINKED, SKIP_STRUCT, STARTPOINT, and TEMP_SELECTED.

Referenced by SCH_EDIT_FRAME::PutDataInPreviousState().

◆ ClearViewPrivData()

void KIGFX::VIEW_ITEM::ClearViewPrivData ( )

inlineinherited

Definition at line 148 of file view_item.h.

     {
         m_viewPrivData = nullptr;
     }

References KIGFX::VIEW_ITEM::m_viewPrivData.

Referenced by KIGFX::VIEW::OnDestroy().

◆ Clone()

EDA_ITEM * TRACK::Clone ( ) const

overridevirtual

Create a duplicate of this item with linked list members set to NULL.

The default version will return NULL in release builds and likely crash the program. In debug builds, a warning message indicating the derived class has not implemented cloning. This really should be a pure virtual function. Due to the fact that there are so many objects derived from EDA_ITEM, the decision was made to return NULL until all the objects derived from EDA_ITEM implement cloning. Once that happens, this function should be made pure.

Returns: A clone of the item.

Reimplemented from EDA_ITEM.

Reimplemented in VIA, and ARC.

Definition at line 54 of file track.cpp.

 {
     return new TRACK( *this );
 }

References TRACK().

Referenced by DRAWING_TOOL::DrawVia(), DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS::processItem(), and PCB_EDIT_FRAME::SetTrackSegmentWidth().

◆ DeleteStructure()

void BOARD_ITEM::DeleteStructure ( )

inherited

Delete this object after removing from its parent if it has one.

Definition at line 113 of file board_item.cpp.

 {
     BOARD_ITEM_CONTAINER* parent = GetParent();
 
     if( parent )
         parent->Remove( this );
 
     delete this;
 }

References BOARD_ITEM::GetParent(), and BOARD_ITEM_CONTAINER::Remove().

Referenced by BOARD::PadDelete(), and DIALOG_FOOTPRINT_PROPERTIES::TransferDataFromWindow().

◆ Duplicate()

virtual BOARD_ITEM* BOARD_ITEM::Duplicate ( ) const

inlinevirtualinherited

Create a copy of this BOARD_ITEM.

Reimplemented in FOOTPRINT.

Definition at line 202 of file board_item.h.

     {
         EDA_ITEM* dupe = Clone();
         const_cast<KIID&>( dupe->m_Uuid ) = KIID();
 
         return static_cast<BOARD_ITEM*>( dupe );
     }

References EDA_ITEM::Clone(), and EDA_ITEM::m_Uuid.

Referenced by CADSTAR_PCB_ARCHIVE_LOADER::addAttribute(), PCB_GROUP::DeepDuplicate(), KIGFX::PCB_PAINTER::draw(), DRAWING_TOOL::DrawBoardCharacteristics(), CADSTAR_PCB_ARCHIVE_LOADER::drawCadstarText(), DRAWING_TOOL::DrawSpecificationStackup(), EDIT_TOOL::Duplicate(), and ARRAY_CREATOR::Invoke().

◆ Flip() [1/2]

void TRACK::Flip	(	const wxPoint &	aCentre,
		bool	aFlipLeftRight
	)

overridevirtual

Flip this object, i.e.

change the board side for this object.

Parameters

aCentre	the rotation point.
aFlipLeftRight	mirror across Y axis instead of X (the default).

Reimplemented from BOARD_ITEM.

Reimplemented in VIA, and ARC.

Definition at line 281 of file track.cpp.

 {
     if( aFlipLeftRight )
     {
         m_Start.x = aCentre.x - ( m_Start.x - aCentre.x );
         m_End.x   = aCentre.x - ( m_End.x - aCentre.x );
     }
     else
     {
         m_Start.y = aCentre.y - ( m_Start.y - aCentre.y );
         m_End.y   = aCentre.y - ( m_End.y - aCentre.y );
     }
 
     int copperLayerCount = GetBoard()->GetCopperLayerCount();
     SetLayer( FlipLayer( GetLayer(), copperLayerCount ) );
 }

References FlipLayer(), BOARD_ITEM::GetBoard(), BOARD::GetCopperLayerCount(), BOARD_ITEM::GetLayer(), m_End, m_Start, and BOARD_ITEM::SetLayer().

◆ Flip() [2/2]

void BOARD_ITEM::Flip	(	const VECTOR2I &	aCentre,
		bool	aFlipLeftRight
	)

inlineinherited

Definition at line 315 of file board_item.h.

     {
         Flip( wxPoint( aCentre.x, aCentre.y ), aFlipLeftRight );
     }

References BOARD_ITEM::Flip(), VECTOR2< T >::x, and VECTOR2< T >::y.

◆ Get() [1/3]

wxAny INSPECTABLE::Get ( PROPERTY_BASE * aProperty )

inlineinherited

Definition at line 86 of file inspectable.h.

     {
         PROPERTY_MANAGER& propMgr = PROPERTY_MANAGER::Instance();
         TYPE_ID thisType = TYPE_HASH( *this );
         void* object = propMgr.TypeCast( this, thisType, aProperty->OwnerHash() );
         return object ? aProperty->getter( object ) : wxAny();
     }

References PROPERTY_BASE::getter(), PROPERTY_MANAGER::Instance(), PROPERTY_BASE::OwnerHash(), TYPE_HASH, and PROPERTY_MANAGER::TypeCast().

Referenced by BOOST_AUTO_TEST_CASE(), CLASS_D_DESC::CLASS_D_DESC(), PCB_EXPR_VAR_REF::GetValue(), and PAD_DESC::PAD_DESC().

◆ Get() [2/3]

template<typename T >

T INSPECTABLE::Get ( PROPERTY_BASE * aProperty )

inlineinherited

Definition at line 95 of file inspectable.h.

     {
         PROPERTY_MANAGER& propMgr = PROPERTY_MANAGER::Instance();
         TYPE_ID thisType = TYPE_HASH( *this );
         void* object = propMgr.TypeCast( this, thisType, aProperty->OwnerHash() );
         return object ? aProperty->get<T>( object ) : T();
     }

References PROPERTY_BASE::get(), PROPERTY_MANAGER::Instance(), PROPERTY_BASE::OwnerHash(), TYPE_HASH, and PROPERTY_MANAGER::TypeCast().

◆ Get() [3/3]

template<typename T >

boost::optional<T> INSPECTABLE::Get ( const wxString & aProperty )

inlineinherited

Definition at line 104 of file inspectable.h.

     {
         PROPERTY_MANAGER& propMgr = PROPERTY_MANAGER::Instance();
         TYPE_ID thisType = TYPE_HASH( *this );
         PROPERTY_BASE* prop = propMgr.GetProperty( thisType, aProperty );
         boost::optional<T> ret;
 
         if( prop )
         {
             void* object = propMgr.TypeCast( this, thisType, prop->OwnerHash() );
 
             if( object )
                 ret = prop->get<T>( object );
         }
 
         return ret;
     }

References PROPERTY_BASE::get(), PROPERTY_MANAGER::GetProperty(), PROPERTY_MANAGER::Instance(), PROPERTY_BASE::OwnerHash(), TYPE_HASH, and PROPERTY_MANAGER::TypeCast().

◆ GetBoard()

BOARD * BOARD_ITEM::GetBoard ( ) const

virtualinherited

Return the BOARD in which this BOARD_ITEM resides, or NULL if none.

Definition at line 46 of file board_item.cpp.

 {
     if( Type() == PCB_T )
         return (BOARD*) this;
 
     BOARD_ITEM* parent = GetParent();
 
     if( parent )
         return parent->GetBoard();
 
     return NULL;
 }

References BOARD_ITEM::GetBoard(), BOARD_ITEM::GetParent(), NULL, PCB_T, and EDA_ITEM::Type().

Referenced by PAD::BuildEffectivePolygon(), PAD::BuildEffectiveShapes(), ZONE::BuildSmoothedPoly(), KIGFX::PCB_PAINTER::draw(), exprFromTo(), VIA::FlashLayer(), PAD::FlashLayer(), PCB_TARGET::Flip(), PCB_TEXT::Flip(), Flip(), FP_SHAPE::Flip(), FP_TEXT::Flip(), DIMENSION_BASE::Flip(), ARC::Flip(), PCB_SHAPE::Flip(), VIA::Flip(), ZONE::Flip(), BOARD_ITEM::GetBoard(), FOOTPRINT::GetBoundingBox(), FOOTPRINT::GetBoundingHull(), BOARD_CONNECTED_ITEM::GetEffectiveNetclass(), ZONE::GetInteractingZones(), BOARD_ITEM::GetLayerName(), VIA::GetMinAnnulus(), PCB_DRAW_PANEL_GAL::GetMsgPanelInfo(), ZONE::GetMsgPanelInfo(), NETINFO_ITEM::GetMsgPanelInfo(), GetMsgPanelInfo(), GetMsgPanelInfoBase_Common(), BOARD_CONNECTED_ITEM::GetNetClass(), BOARD_CONNECTED_ITEM::GetNetnameMsg(), BOARD_CONNECTED_ITEM::GetOwnClearance(), ZONE::GetSelectMenuText(), DRC_ENGINE::GetShape(), FP_TEXT::GetShownText(), PAD::GetSolderMaskMargin(), PAD::GetSolderPasteMargin(), BOARD::GetTrackLength(), GetWidthConstraints(), inDiffPair(), insideArea(), insideBackCourtyard(), insideCourtyard(), insideFrontCourtyard(), BOARD_ITEM::layerMaskDescribe(), VIA::layerMaskDescribe(), CONVERT_TOOL::makePolysFromCircles(), PAD::MergePrimitivesAsPolygon(), EAGLE_PLUGIN::packageWire(), PCB_BASE_EDIT_FRAME::PutDataInPreviousState(), BOARD::ResolveDRCExclusions(), BOARD_CONNECTED_ITEM::SetNetCode(), DIALOG_FOOTPRINT_PROPERTIES_FP_EDITOR::TransferDataToWindow(), DIALOG_FOOTPRINT_PROPERTIES::TransferDataToWindow(), ZONE::TransformSmoothedOutlineToPolygon(), ZONE::TransformSolidAreasShapesToPolygon(), ViewBBox(), FOOTPRINT::ViewBBox(), VIA::ViewGetLOD(), and PAD::ViewGetLOD().

◆ GetBoundingBox()

const EDA_RECT TRACK::GetBoundingBox ( ) const

overridevirtual

Return the orthogonal bounding box of this object for display purposes.

This box should be an enclosing perimeter for visible components of this object, and the units should be in the pcb or schematic coordinate system. It is OK to overestimate the size by a few counts.

Reimplemented from EDA_ITEM.

Definition at line 220 of file track.cpp.

 {
     // end of track is round, this is its radius, rounded up
     int radius = ( m_Width + 1 ) / 2;
     int ymax, xmax, ymin, xmin;
 
     if( Type() == PCB_VIA_T )
     {
         ymax = m_Start.y;
         xmax = m_Start.x;
 
         ymin = m_Start.y;
         xmin = m_Start.x;
     }
     else if( Type() == PCB_ARC_T )
     {
         std::shared_ptr<SHAPE> arc = GetEffectiveShape();
         auto bbox = arc->BBox();
 
         xmin = bbox.GetLeft();
         xmax = bbox.GetRight();
         ymin = bbox.GetTop();
         ymax = bbox.GetBottom();
     }
     else
     {
         ymax = std::max( m_Start.y, m_End.y );
         xmax = std::max( m_Start.x, m_End.x );
 
         ymin = std::min( m_Start.y, m_End.y );
         xmin = std::min( m_Start.x, m_End.x );
     }
 
     ymax += radius;
     xmax += radius;
 
     ymin -= radius;
     xmin -= radius;
 
     // return a rectangle which is [pos,dim) in nature.  therefore the +1
     EDA_RECT ret( wxPoint( xmin, ymin ), wxSize( xmax - xmin + 1, ymax - ymin + 1 ) );
 
     return ret;
 }

References GetEffectiveShape(), m_End, m_Start, m_Width, PCB_ARC_T, PCB_VIA_T, and EDA_ITEM::Type().

Referenced by DRAWING_TOOL::DrawVia(), and ViewBBox().

◆ GetCenter()

virtual wxPoint BOARD_ITEM::GetCenter ( ) const

inlinevirtualinherited

This defaults to the center of the bounding box if not overridden.

Returns: center point of the item

Reimplemented in ARC, PAD, PCB_SHAPE, and PCB_MARKER.

Definition at line 114 of file board_item.h.

     {
         return GetBoundingBox().GetCenter();
     }

References EDA_ITEM::GetBoundingBox(), and EDA_RECT::GetCenter().

Referenced by PCB_GRID_HELPER::computeAnchors(), ALIGN_DISTRIBUTE_TOOL::doDistributeCentersHorizontally(), and ALIGN_DISTRIBUTE_TOOL::doDistributeCentersVertically().

◆ GetClass()

wxString TRACK::GetClass ( ) const

inlineoverridevirtual

Return the class name.

Implements EDA_ITEM.

Reimplemented in VIA, and ARC.

Definition at line 197 of file track.h.

     {
         return wxT( "TRACK" );
     }

◆ GetEditFlags()

STATUS_FLAGS EDA_ITEM::GetEditFlags ( ) const

inlineinherited

Definition at line 208 of file eda_item.h.

     {
         constexpr int mask = ( IS_NEW | IS_PASTED | IS_MOVED | IS_RESIZED | IS_DRAGGED |
                                IS_WIRE_IMAGE | STRUCT_DELETED );
 
         return m_flags & mask;
     }

References IS_DRAGGED, IS_MOVED, IS_NEW, IS_PASTED, IS_RESIZED, IS_WIRE_IMAGE, EDA_ITEM::m_flags, and STRUCT_DELETED.

Referenced by EDA_ITEM::ClearEditFlags(), SCH_EDIT_FRAME::DeleteJunction(), SCH_EDIT_TOOL::editFieldText(), SYMBOL_EDITOR_PIN_TOOL::EditPinProperties(), SCH_EDITOR_CONTROL::EditWithSymbolEditor(), SCH_COMPONENT::GetMsgPanelInfo(), SELECTION_CONDITIONS::Idle(), SELECTION_CONDITIONS::IdleSelection(), SYMBOL_EDITOR_MOVE_TOOL::Main(), PCB_POINT_EDITOR::OnSelectionChange(), SYMBOL_EDITOR_EDIT_TOOL::Properties(), SCH_EDIT_TOOL::Properties(), PAD_TOOL::recombinePad(), SCH_EDIT_FRAME::SchematicCleanUp(), SCH_EDIT_FRAME::SelectUnit(), DIALOG_DIMENSION_PROPERTIES::TransferDataFromWindow(), DIALOG_TARGET_PROPERTIES::TransferDataFromWindow(), DIALOG_SYMBOL_PROPERTIES::TransferDataFromWindow(), DIALOG_TEXT_PROPERTIES::TransferDataFromWindow(), DIALOG_LABEL_EDITOR::TransferDataFromWindow(), and DIALOG_FOOTPRINT_PROPERTIES::TransferDataFromWindow().

◆ GetEffectiveNetclass()

NETCLASS * BOARD_CONNECTED_ITEM::GetEffectiveNetclass ( ) const

virtualinherited

Return the NETCLASS for this item, or the default netclass if none is defined.

Note: Do not return a std::shared_ptr from this. It is used heavily in DRC, and the std::shared_ptr stuff shows up large in performance profiling.

Definition at line 69 of file board_connected_item.cpp.

 {
     // NB: we must check the net first, as when it is 0 GetNetClass() will return the
     // orphaned net netclass, not the default netclass.
     if( !m_netinfo || m_netinfo->GetNetCode() == 0 )
         return GetBoard()->GetDesignSettings().GetDefault();
     else
         return GetNetClass();
 }

References BOARD_ITEM::GetBoard(), BOARD_DESIGN_SETTINGS::GetDefault(), BOARD::GetDesignSettings(), BOARD_CONNECTED_ITEM::GetNetClass(), NETINFO_ITEM::GetNetCode(), and BOARD_CONNECTED_ITEM::m_netinfo.

◆ GetEffectiveShape()

std::shared_ptr< SHAPE > TRACK::GetEffectiveShape ( PCB_LAYER_ID aLayer = UNDEFINED_LAYER ) const

overridevirtual

Some pad shapes can be complex (rounded/chamfered rectangle), even without considering custom shapes.

This routine returns a COMPOUND shape (set of simple shapes which make up the pad for use with routing, collision determination, etc).

Note: This list can contain a SHAPE_SIMPLE (a simple single-outline non-intersecting polygon), but should never contain a SHAPE_POLY_SET (a complex polygon consisting of multiple outlines and/or holes).

Parameters

aLayer in case of items spanning multiple layers, only the shapes belonging to aLayer will be returned. Pass UNDEFINED_LAYER to return shapes for all layers.

Reimplemented from BOARD_ITEM.

Reimplemented in VIA, and ARC.

Definition at line 999 of file track.cpp.

 {
     return std::make_shared<SHAPE_SEGMENT>( m_Start, m_End, m_Width );
 }

References m_End, m_Start, and m_Width.

Referenced by GetBoundingBox().

◆ GetEnd()

const wxPoint& TRACK::GetEnd ( ) const

inline

Definition at line 113 of file track.h.

113 { return m_End; }

Referenced by CN_LIST::Add(), ApproxCollinear(), TRACKS_CLEANER::cleanup(), PCB_GRID_HELPER::computeAnchors(), BOARD_ADAPTER::createTrack(), DIALOG_TRACK_VIA_PROPERTIES::DIALOG_TRACK_VIA_PROPERTIES(), EDIT_TOOL::DragArcTrack(), KIGFX::PCB_PAINTER::draw(), DRAWING_TOOL::DrawVia(), extractDiffPairCoupledItems(), EDIT_TOOL::FilletTracks(), PCB_IO::format(), DSN::SPECCTRA_DB::FromBOARD(), ARC::GetEffectiveShape(), CONVERT_TOOL::getStartEndPoints(), HitTest(), ARC::HitTest(), CADSTAR_PCB_ARCHIVE_LOADER::makeTracksFromDrawsegments(), TRACKS_CLEANER::mergeCollinearSegments(), ROUTER_TOOL::NeighboringSegmentFilter(), PCB_SELECTION_TOOL::selectConnectedTracks(), PNS_KICAD_IFACE_BASE::syncArc(), PNS_KICAD_IFACE_BASE::syncTrack(), DRC_TEST_PROVIDER_COPPER_CLEARANCE::testTrackAgainstItem(), TRACKS_CLEANER::testTrackEndpointIsNode(), DIALOG_TRACK_VIA_PROPERTIES::TransferDataFromWindow(), and TransformShapeWithClearanceToPolygon().

wxPoint m_End

Line end point.

Definition: track.h:257

References m_End.

◆ GetEndPoint()

const wxPoint& TRACK::GetEndPoint ( ENDPOINT_T aEndPoint ) const

inline

Return the selected endpoint (start or end)

Definition at line 125 of file track.h.

     {
         if( aEndPoint == ENDPOINT_START )
             return m_Start;
         else
             return m_End;
     }

References ENDPOINT_START, m_End, and m_Start.

Referenced by BOARD::GetPad().

◆ GetEndX()

int TRACK::GetEndX ( ) const

inline

Definition at line 121 of file track.h.

121 { return m_End.x; }

wxPoint m_End

Line end point.

Definition: track.h:257

References m_End.

Referenced by TRACK_VIA_DESC::TRACK_VIA_DESC().

◆ GetEndY()

int TRACK::GetEndY ( ) const

inline

Definition at line 122 of file track.h.

122 { return m_End.y; }

wxPoint m_End

Line end point.

Definition: track.h:257

References m_End.

Referenced by TRACK_VIA_DESC::TRACK_VIA_DESC().

◆ GetFlags()

STATUS_FLAGS EDA_ITEM::GetFlags ( ) const

inlineinherited

Definition at line 205 of file eda_item.h.

205 { return m_flags; }

Referenced by BACK_ANNOTATE::applyChangelist(), ConvertOutlineToPolygon(), SCH_EDIT_FRAME::ConvertPart(), KIGFX::SCH_PAINTER::draw(), DRC_ENGINE::EvalRules(), PCB_SELECTION_TOOL::expandConnection(), PCB_SELECTION_TOOL::FilterCollectorForHierarchy(), insideArea(), BOARD_INSPECTION_TOOL::InspectConstraints(), LIB_PART::LIB_PART(), DIALOG_DRC::OnDRCItemSelected(), DIALOG_FOOTPRINT_CHECKER::OnSelectItem(), LIB_PART::operator=(), BOARD_COMMIT::Push(), FOOTPRINT::Remove(), BOARD::Remove(), SCH_EDIT_FRAME::SaveCopyInUndoList(), SCH_EDIT_FRAME::SchematicCleanUp(), SCH_EDIT_FRAME::SelectUnit(), DS_DATA_ITEM::SyncDrawItems(), DS_DATA_ITEM_POLYGONS::SyncDrawItems(), DS_DATA_ITEM_BITMAP::SyncDrawItems(), and DIALOG_SYMBOL_PROPERTIES::TransferDataFromWindow().

STATUS_FLAGS m_flags

Definition: eda_item.h:531

References EDA_ITEM::m_flags.

◆ GetFocusPosition()

const wxPoint TRACK::GetFocusPosition ( ) const

inlineoverridevirtual

Similar to GetPosition, but allows items to return their visual center rather than their anchor.

Reimplemented from EDA_ITEM.

Definition at line 107 of file track.h.

107 { return ( m_Start + m_End ) / 2; }

wxPoint m_Start

Line start point.

Definition: track.h:256

Referenced by PCB_GRID_HELPER::BestSnapAnchor(), APPEARANCE_CONTROLS::doApplyLayerPreset(), DRAWING_TOOL::DrawVia(), DRC_ENGINE::EvalRules(), extractDiffPairCoupledItems(), hash_board_item(), DRC_RTREE::Insert(), BOARD_INSPECTION_TOOL::InspectClearance(), BOARD_ITEM::layerMaskDescribe(), FABMASTER::loadZone(), PCB_GRID_HELPER::nearestAnchor(), DIALOG_FOOTPRINT_CHECKER::OnSelectItem(), CN_VISITOR::operator()(), and PANEL_SETUP_LAYERS::TransferDataFromWindow().

wxPoint m_End

Line end point.

Definition: track.h:257

References m_End, and m_Start.

◆ GetLayer()

virtual PCB_LAYER_ID BOARD_ITEM::GetLayer ( ) const

inlinevirtualinherited

Return the primary layer this item is on.

Reimplemented in ZONE.

Definition at line 173 of file board_item.h.

173 { return m_layer; }

BOARD_ITEM::m_layer

PCB_LAYER_ID m_layer

Definition: board_item.h:363

References BOARD_ITEM::m_layer.

◆ GetLayerName()

wxString BOARD_ITEM::GetLayerName ( ) const

inherited

Return the name of the PCB layer on which the item resides.

Returns: the layer name associated with this item.

Definition at line 60 of file board_item.cpp.

 {
     BOARD*  board = GetBoard();
 
     if( board )
         return board->GetLayerName( m_layer );
 
     // If no parent, return standard name
     return BOARD::GetStandardLayerName( m_layer );
 }

References BOARD_ITEM::GetBoard(), BOARD::GetLayerName(), BOARD::GetStandardLayerName(), and BOARD_ITEM::m_layer.

Referenced by PCB_TEXT::GetMsgPanelInfo(), PCB_TARGET::GetMsgPanelInfo(), FP_TEXT::GetMsgPanelInfo(), DIMENSION_BASE::GetMsgPanelInfo(), PCB_SHAPE::GetMsgPanelInfo(), LEADER::GetMsgPanelInfo(), PCB_TEXT::GetSelectMenuText(), FP_SHAPE::GetSelectMenuText(), GetSelectMenuText(), DIMENSION_BASE::GetSelectMenuText(), PCB_SHAPE::GetSelectMenuText(), PCB_TEXT::GetShownText(), and FOOTPRINT::ResolveTextVar().

◆ GetLayerSet()

virtual LSET BOARD_ITEM::GetLayerSet ( ) const

inlinevirtualinherited

Return a std::bitset of all layers on which the item physically resides.

Reimplemented in VIA, PAD, ZONE, and PCB_GROUP.

Definition at line 178 of file board_item.h.

178 { return LSET( m_layer ); }

LSET

LSET is a set of PCB_LAYER_IDs.

Definition: layers_id_colors_and_visibility.h:506

BOARD_ITEM::m_layer

PCB_LAYER_ID m_layer

Definition: board_item.h:363

References BOARD_ITEM::m_layer.

◆ GetLength()

virtual double TRACK::GetLength ( ) const

inlinevirtual

Function GetLength returns the length of the track using the hypotenuse calculation.

Returns: double - the length of the track

Reimplemented in ARC.

Definition at line 141 of file track.h.

     {
         return GetLineLength( m_Start, m_End );
     }

References GetLineLength(), m_End, and m_Start.

Referenced by EDIT_TOOL::DragArcTrack(), EDIT_TOOL::FilletTracks(), GetMsgPanelInfo(), and GetSelectMenuText().

◆ GetLocalClearance()

int TRACK::GetLocalClearance ( wxString * aSource ) const

overridevirtual

Function GetLocalClearance returns any local clearance overrides set in the "classic" (ie: pre-rule) system.

Parameters

aSource [out] optionally reports the source as a user-readable string

Returns: int - the clearance in internal units.

Reimplemented from BOARD_CONNECTED_ITEM.

Definition at line 107 of file track.cpp.

 {
     // Not currently implemented
     return 0;
 }

◆ GetLocalClearanceOverrides()

virtual int BOARD_CONNECTED_ITEM::GetLocalClearanceOverrides ( wxString * aSource ) const

inlinevirtualinherited

Return any local clearance overrides set in the "classic" (ie: pre-rule) system.

Parameters

aSource [out] optionally reports the source as a user-readable string.

Returns: the clearance in internal units.

Reimplemented in PAD.

Definition at line 153 of file board_connected_item.h.

153 { return 0; }

Referenced by DRC_ENGINE::EvalRules().

◆ GetLocalRatsnestVisible()

bool BOARD_CONNECTED_ITEM::GetLocalRatsnestVisible ( ) const

inlineinherited

Definition at line 195 of file board_connected_item.h.

     {
         return m_localRatsnestVisible;
     }

References BOARD_CONNECTED_ITEM::m_localRatsnestVisible.

Referenced by PCB_EDIT_FRAME::ExchangeFootprint().

◆ GetMenuImage()

BITMAPS TRACK::GetMenuImage ( ) const

overridevirtual

Return a pointer to an image to be used in menus.

The default version returns the right arrow image. Override this function to provide object specific menu images.

Returns: The menu image associated with the item.

Reimplemented from EDA_ITEM.

Reimplemented in VIA.

Definition at line 911 of file track.cpp.

 {
     return BITMAPS::add_tracks;
 }

References add_tracks.

◆ GetMsgPanelInfo()

void TRACK::GetMsgPanelInfo	(	EDA_DRAW_FRAME *	aFrame,
		std::vector< MSG_PANEL_ITEM > &	aList
	)

overridevirtual

Populate aList of MSG_PANEL_ITEM objects with it's internal state for display purposes.

Parameters

aList is the list to populate.

Reimplemented from EDA_ITEM.

Reimplemented in VIA.

Definition at line 653 of file track.cpp.

 {
     EDA_UNITS units = aFrame->GetUserUnits();
     wxString  msg;
     BOARD*    board = GetBoard();
 
     aList.emplace_back( _( "Type" ),
                         Type() == PCB_ARC_T ? ( "Track (arc)" ) : _( "Track" ) );
 
 
     GetMsgPanelInfoBase_Common( aFrame, aList );
 
     aList.emplace_back( _( "Layer" ), layerMaskDescribe() );
 
     aList.emplace_back( _( "Width" ), MessageTextFromValue( units, m_Width ) );
 
     if( Type() == PCB_ARC_T )
     {
         double radius = static_cast<ARC*>( this )->GetRadius();
         aList.emplace_back( _( "Radius" ), MessageTextFromValue( units, radius ) );
     }
 
     aList.emplace_back( _( "Segment Length" ), MessageTextFromValue( units, GetLength() ) );
 
     // Display full track length (in Pcbnew)
     if( board && GetNetCode() > 0 )
     {
         int    count;
         double trackLen;
         double lenPadToDie;
 
         std::tie( count, trackLen, lenPadToDie ) = board->GetTrackLength( *this );
 
         aList.emplace_back( _( "Routed Length" ), MessageTextFromValue( units, trackLen ) );
 
         if( lenPadToDie != 0 )
         {
             msg = MessageTextFromValue( units, lenPadToDie );
             aList.emplace_back( _( "Pad To Die Length" ), msg );
 
             msg = MessageTextFromValue( units, trackLen + lenPadToDie );
             aList.emplace_back( _( "Full Length" ), msg );
         }
     }
 
     wxString source;
     int clearance = GetOwnClearance( GetLayer(), &source );
 
     aList.emplace_back( wxString::Format( _( "Min Clearance: %s" ),
                                           MessageTextFromValue( units, clearance ) ),
                         wxString::Format( _( "(from %s)" ), source ) );
 
     int minWidth, maxWidth;
     GetWidthConstraints( &minWidth, &maxWidth, &source );
 
     aList.emplace_back( wxString::Format( _( "Min Width: %s" ),
                                           MessageTextFromValue( units, minWidth ) ),
                         wxString::Format( _( "(from %s)" ), source ) );
 }

References _, Format(), BOARD_ITEM::GetBoard(), BOARD_ITEM::GetLayer(), GetLength(), GetMsgPanelInfoBase_Common(), BOARD_CONNECTED_ITEM::GetNetCode(), BOARD_CONNECTED_ITEM::GetOwnClearance(), BOARD::GetTrackLength(), EDA_BASE_FRAME::GetUserUnits(), GetWidthConstraints(), BOARD_ITEM::layerMaskDescribe(), m_Width, MessageTextFromValue(), PCB_ARC_T, and EDA_ITEM::Type().

◆ GetMsgPanelInfoBase_Common()

void TRACK::GetMsgPanelInfoBase_Common	(	EDA_DRAW_FRAME *	aFrame,
		std::vector< MSG_PANEL_ITEM > &	aList
	)		const

protected

Definition at line 756 of file track.cpp.

 {
     wxString msg;
 
     aList.emplace_back( _( "Net" ), UnescapeString( GetNetname() ) );
 
     aList.emplace_back( _( "NetClass" ), UnescapeString( GetNetClass()->GetName() ) );
 
     #if 0   // Enable for debugging
     if( GetBoard() )
     {
         // Display net code:
         msg.Printf( wxT( "%d" ), GetNetCode() );
         aList.emplace_back( _( "NetCode" ), msg );
     }
 
     // Display the flags:
     msg.Printf( wxT( "0x%08X" ), m_flags );
     aList.emplace_back( wxT( "Flags" ), msg );
 
     // Display start and end positions:
     msg.Printf( wxT( "%d %d" ), m_Start.x, m_Start.y );
     aList.push_back( MSG_PANEL_ITEM( wxT( "Start pos" ), msg ) );
     msg.Printf( wxT( "%d %d" ), m_End.x, m_End.y );
     aList.push_back( MSG_PANEL_ITEM( wxT( "End pos" ), msg ) );
 #endif
 
     // Display the State member
     aList.emplace_back( _( "Status" ), IsLocked() ? _( "Locked" ) : wxT( "" ) );
 }

References _, BOARD_ITEM::GetBoard(), BOARD_CONNECTED_ITEM::GetNetClass(), BOARD_CONNECTED_ITEM::GetNetCode(), BOARD_CONNECTED_ITEM::GetNetname(), BOARD_ITEM::IsLocked(), m_End, EDA_ITEM::m_flags, m_Start, and UnescapeString().

Referenced by GetMsgPanelInfo(), and VIA::GetMsgPanelInfo().

◆ GetNet()

NETINFO_ITEM* BOARD_CONNECTED_ITEM::GetNet ( ) const

inlineinherited

Return #NET_INFO object for a given item.

Definition at line 77 of file board_connected_item.h.

     {
         return m_netinfo;
     }

References BOARD_CONNECTED_ITEM::m_netinfo.

Referenced by PNS_PCBNEW_RULE_RESOLVER::DpNetPair(), EDIT_TOOL::DragArcTrack(), EDIT_TOOL::FilletTracks(), isCoupledDiffPair(), CADSTAR_PCB_ARCHIVE_LOADER::makeTracksFromDrawsegments(), EDA_3D_CANVAS::OnMouseMove(), BOARD_EDITOR_CONTROL::RepairBoard(), test::DRC_TEST_PROVIDER_DIFF_PAIR_COUPLING::Run(), and DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS::TransferDataToWindow().

◆ GetNetClass()

NETCLASS * BOARD_CONNECTED_ITEM::GetNetClass ( ) const

virtualinherited

Return the NETCLASS for this item.

Note: Do not return a std::shared_ptr from this. It is used heavily in DRC, and the std::shared_ptr stuff shows up large in performance profiling.

Reimplemented in ZONE.

Definition at line 108 of file board_connected_item.cpp.

 {
     if( m_netinfo && m_netinfo->GetNetClass() )
         return m_netinfo->GetNetClass();
     else
         return GetBoard()->GetDesignSettings().GetDefault();
 }

References BOARD_ITEM::GetBoard(), BOARD_DESIGN_SETTINGS::GetDefault(), BOARD::GetDesignSettings(), NETINFO_ITEM::GetNetClass(), and BOARD_CONNECTED_ITEM::m_netinfo.

Referenced by VIA::GetDrillValue(), BOARD_CONNECTED_ITEM::GetEffectiveNetclass(), BOARD_INSPECTION_TOOL::getItemDescription(), PAD::GetMsgPanelInfo(), GetMsgPanelInfoBase_Common(), ZONE::GetNetClass(), PCB_EDIT_FRAME::SetTrackSegmentWidth(), and DIALOG_TRACK_VIA_PROPERTIES::TransferDataFromWindow().

◆ GetNetClassName()

wxString BOARD_CONNECTED_ITEM::GetNetClassName ( ) const

virtualinherited

Returns the netclass of the zone.

If the net is not found (can happen when a netlist is reread) and the net name does not exist, return the default net class (should not return a null pointer).

Returns: the net class name of this item.

Reimplemented in ZONE.

Definition at line 117 of file board_connected_item.cpp.

 {
     if( m_netinfo )
         return m_netinfo->GetNetClassName();
     else
         return wxEmptyString;
 }

References NETINFO_ITEM::GetNetClassName(), and BOARD_CONNECTED_ITEM::m_netinfo.

Referenced by BOARD_CONNECTED_ITEM_DESC::BOARD_CONNECTED_ITEM_DESC(), KIGFX::PCB_RENDER_SETTINGS::GetColor(), ZONE::GetNetClassName(), main(), and DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS::visitItem().

◆ GetNetCode()

int BOARD_CONNECTED_ITEM::GetNetCode ( ) const

inlineinherited

Returns: the net code.

Definition at line 93 of file board_connected_item.h.

     {
         return m_netinfo ? m_netinfo->GetNetCode() : -1;
     }

References NETINFO_ITEM::GetNetCode(), and BOARD_CONNECTED_ITEM::m_netinfo.

Referenced by ZONE_FILLER::addHatchFillTypeOnZone(), BOARD_CONNECTED_ITEM_DESC::BOARD_CONNECTED_ITEM_DESC(), ZONE_FILLER::buildCopperItemClearances(), connectedItemFilter(), CreateRoutesSection(), KIGFX::PCB_PAINTER::draw(), DRAWING_TOOL::DrawVia(), PCB_EDIT_FRAME::ExchangeFootprint(), ZONE_FILLER::Fill(), PNS::NODE::FindItemByParent(), PCB_IO::format(), DSN::SPECCTRA_DB::FromBOARD(), KIGFX::PCB_RENDER_SETTINGS::GetColor(), CONNECTIVITY_DATA::GetConnectedItems(), ZONE::GetInteractingZones(), GetMsgPanelInfo(), GetMsgPanelInfoBase_Common(), BOARD_CONNECTED_ITEM::GetNetnameMsg(), hasThermalConnection(), BOARD_INSPECTION_TOOL::highlightNet(), DIALOG_PAD_PROPERTIES::initValues(), BOARD_INSPECTION_TOOL::InspectClearance(), CONNECTIVITY_DATA::IsConnectedOnLayer(), ZONE::IsIsland(), ZONE::IsSame(), ZONE_FILLER::knockoutThermalReliefs(), AR_AUTOPLACER::nearestPad(), ROUTER_TOOL::NeighboringSegmentFilter(), CN_ITEM::Net(), BOARD::NormalizeAreaPolygon(), TRACK::cmp_tracks::operator()(), ZONE_SETTINGS::operator<<(), DIALOG_PAD_PROPERTIES::PadTypeSelected(), process(), BOARD_EDITOR_CONTROL::RepairBoard(), PCB_SELECTION_CONDITIONS::sameNetFunc(), SaveCopyOfZones(), PCB_SELECTION_TOOL::selectNet(), ZONE_FILLER::subtractHigherPriorityZones(), PNS_KICAD_IFACE_BASE::syncArc(), PNS_KICAD_IFACE_BASE::syncPad(), PNS_KICAD_IFACE_BASE::syncTrack(), PNS_KICAD_IFACE_BASE::syncVia(), DRC_TEST_PROVIDER_COPPER_CLEARANCE::testPadAgainstItem(), DRC_TEST_PROVIDER_COPPER_CLEARANCE::testZones(), BOARD::TracksInNet(), DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS::TransferDataToWindow(), DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS::visitItem(), and BOARD_EDITOR_CONTROL::ZoneMerge().

◆ GetNetname()

wxString BOARD_CONNECTED_ITEM::GetNetname ( ) const

inlineinherited

Returns: the full netname.

Definition at line 119 of file board_connected_item.h.

     {
         return m_netinfo ? m_netinfo->GetNetname() : wxString();
     }

References NETINFO_ITEM::GetNetname(), and BOARD_CONNECTED_ITEM::m_netinfo.

Referenced by BOARD_CONNECTED_ITEM_DESC::BOARD_CONNECTED_ITEM_DESC(), KIGFX::PCB_PAINTER::draw(), PCB_IO::format(), DSN::SPECCTRA_DB::FromBOARD(), ZONE::GetMsgPanelInfo(), PAD::GetMsgPanelInfo(), GetMsgPanelInfoBase_Common(), BOARD_NETLIST_UPDATER::getNetname(), BOARD_CONNECTED_ITEM::GetNetnameMsg(), CN_CLUSTER::OriginNetName(), BRDITEMS_PLOTTER::PlotFilledAreas(), BRDITEMS_PLOTTER::PlotPad(), and DRC_TEST_PROVIDER_COPPER_CLEARANCE::testPadAgainstItem().

◆ GetNetnameMsg()

wxString BOARD_CONNECTED_ITEM::GetNetnameMsg ( ) const

inherited

Returns: the full netname or "<no net>" in square braces, followed by "(Not Found)" if the netcode is undefined.

Definition at line 126 of file board_connected_item.cpp.

 {
     if( !GetBoard() )
         return wxT( "[** NO BOARD DEFINED **]" );
 
     wxString netname = GetNetname();
 
     if( !netname.length() )
         return wxT( "[<no net>]" );
     else if( GetNetCode() < 0 )
         return wxT( "[" + UnescapeString( netname ) + "](" + _( "Not Found" ) + ")" );
     else
         return wxT( "[" + UnescapeString( netname ) + "]" );
 }

References _, BOARD_ITEM::GetBoard(), BOARD_CONNECTED_ITEM::GetNetCode(), BOARD_CONNECTED_ITEM::GetNetname(), and UnescapeString().

Referenced by GetSelectMenuText(), VIA::GetSelectMenuText(), and ZONE::GetSelectMenuText().

◆ GetOwnClearance()

int BOARD_CONNECTED_ITEM::GetOwnClearance	(	PCB_LAYER_ID	aLayer,
		wxString *	aSource = `nullptr`
	)		const

virtualinherited

Return an item's "own" clearance in internal units.

Parameters

aLayer	the layer in question.
aSource	[out] optionally reports the source as a user-readable string.

Returns: the clearance in internal units.

Definition at line 83 of file board_connected_item.cpp.

 {
     DRC_CONSTRAINT constraint;
 
     if( GetBoard() && GetBoard()->GetDesignSettings().m_DRCEngine )
     {
         BOARD_DESIGN_SETTINGS& bds = GetBoard()->GetDesignSettings();
 
         constraint = bds.m_DRCEngine->EvalRules( CLEARANCE_CONSTRAINT, this, nullptr, aLayer );
     }
 
     if( constraint.Value().HasMin() )
     {
         if( aSource )
             *aSource = constraint.GetName();
 
         return constraint.Value().Min();
     }
 
     return 0;
 }

References CLEARANCE_CONSTRAINT, BOARD_ITEM::GetBoard(), BOARD::GetDesignSettings(), DRC_CONSTRAINT::GetName(), MINOPTMAX< T >::HasMin(), BOARD_DESIGN_SETTINGS::m_DRCEngine, MINOPTMAX< T >::Min(), and DRC_CONSTRAINT::Value().

Referenced by KIGFX::PCB_PAINTER::draw(), ZONE::GetMsgPanelInfo(), GetMsgPanelInfo(), VIA::GetMsgPanelInfo(), PAD::GetMsgPanelInfo(), and PAD::ViewBBox().

◆ GetParent()

BOARD_ITEM_CONTAINER* BOARD_ITEM::GetParent ( void ) const

inlineinherited

Definition at line 168 of file board_item.h.

168 { return (BOARD_ITEM_CONTAINER*) m_parent; }

EDA_ITEM::m_parent

EDA_ITEM * m_parent

Linked list: Link (parent struct)

Definition: eda_item.h:529

BOARD_ITEM_CONTAINER

Abstract interface for BOARD_ITEMs capable of storing other items inside.

Definition: board_item_container.h:52

References EDA_ITEM::m_parent.

◆ GetParentGroup()

PCB_GROUP* BOARD_ITEM::GetParentGroup ( ) const

inlineinherited

Definition at line 93 of file board_item.h.

93 { return m_group; }

BOARD_ITEM::m_group

PCB_GROUP * m_group

Definition: board_item.h:364

References BOARD_ITEM::m_group.

Referenced by PCB_GROUP::AddItem(), PCB_EDIT_FRAME::ExchangeFootprint(), getTopLevelGroup(), memberOf(), PCB_CONTROL::placeBoardItems(), BOARD_COMMIT::Push(), EDIT_TOOL::Remove(), FOOTPRINT::Remove(), BOARD::Remove(), GROUP_TOOL::RemoveFromGroup(), and DIALOG_GROUP_PROPERTIES::TransferDataFromWindow().

◆ GetPosition()

wxPoint TRACK::GetPosition ( ) const

inlineoverridevirtual

Reimplemented from EDA_ITEM.

Reimplemented in VIA, and ARC.

Definition at line 106 of file track.h.

106 { return m_Start; }

wxPoint m_Start

Line start point.

Definition: track.h:256

References m_Start.

Referenced by CONNECTIVITY_DATA::TestTrackEndpointDangling().

◆ GetSelectMenuText()

wxString TRACK::GetSelectMenuText ( EDA_UNITS aUnits ) const

overridevirtual

Return the text to display to be used in the selection clarification context menu when multiple items are found at the current cursor position.

The default version of this function raises an assertion in the debug mode and returns a string to indicate that it was not overridden to provide the object specific text.

Returns: The menu text string.

Reimplemented from EDA_ITEM.

Reimplemented in VIA.

Definition at line 900 of file track.cpp.

 {
     return wxString::Format( Type() == PCB_ARC_T ?
                                 _("Track (arc) %s on %s, length %s" )
                                 : _("Track %s on %s, length %s" ),
                              GetNetnameMsg(),
                              GetLayerName(),
                              MessageTextFromValue( aUnits, GetLength() ) );
 }

References _, Format(), BOARD_ITEM::GetLayerName(), GetLength(), BOARD_CONNECTED_ITEM::GetNetnameMsg(), MessageTextFromValue(), PCB_ARC_T, and EDA_ITEM::Type().

◆ GetShortNetname()

wxString BOARD_CONNECTED_ITEM::GetShortNetname ( ) const

inlineinherited

Returns: the short netname.

Definition at line 133 of file board_connected_item.h.

     {
         return m_netinfo->GetShortNetname();
     }

References NETINFO_ITEM::GetShortNetname(), and BOARD_CONNECTED_ITEM::m_netinfo.

Referenced by KIGFX::PCB_PAINTER::draw().

◆ GetStart()

const wxPoint& TRACK::GetStart ( ) const

inline

Definition at line 116 of file track.h.

116 { return m_Start; }

Referenced by CN_LIST::Add(), ApproxCollinear(), TRACKS_CLEANER::cleanup(), PCB_GRID_HELPER::computeAnchors(), BOARD_ADAPTER::createTrack(), DIALOG_TRACK_VIA_PROPERTIES::DIALOG_TRACK_VIA_PROPERTIES(), EDIT_TOOL::DragArcTrack(), KIGFX::PCB_PAINTER::draw(), DRAWING_TOOL::DrawVia(), extractDiffPairCoupledItems(), EDIT_TOOL::FilletTracks(), PCB_IO::format(), DSN::SPECCTRA_DB::FromBOARD(), ARC::GetEffectiveShape(), CONVERT_TOOL::getStartEndPoints(), HitTest(), ARC::HitTest(), VIA::HitTest(), RENDER_3D_RAYTRACE::insertHole(), CADSTAR_PCB_ARCHIVE_LOADER::makeTracksFromDrawsegments(), TRACKS_CLEANER::mergeCollinearSegments(), ROUTER_TOOL::NeighboringSegmentFilter(), PCB_SELECTION_TOOL::selectConnectedTracks(), PNS_KICAD_IFACE_BASE::syncArc(), PNS_KICAD_IFACE_BASE::syncTrack(), DRC_TEST_PROVIDER_COPPER_CLEARANCE::testTrackAgainstItem(), TRACKS_CLEANER::testTrackEndpointIsNode(), DIALOG_TRACK_VIA_PROPERTIES::TransferDataFromWindow(), and TransformShapeWithClearanceToPolygon().

wxPoint m_Start

Line start point.

Definition: track.h:256

References m_Start.

◆ GetState()

int EDA_ITEM::GetState ( int type ) const

inlineinherited

Definition at line 187 of file eda_item.h.

     {
         return m_status & type;
     }

References EDA_ITEM::m_status.

Referenced by BOARD_ITEM::IsLocked().

◆ GetStatus()

STATUS_FLAGS EDA_ITEM::GetStatus ( ) const

inlineinherited

Definition at line 200 of file eda_item.h.

200 { return m_status; }

EDA_ITEM::m_status

STATUS_FLAGS m_status

Definition: eda_item.h:528

References EDA_ITEM::m_status.

◆ GetWidth()

int TRACK::GetWidth ( ) const

inline

Definition at line 110 of file track.h.

110 { return m_Width; }

TRACK::m_Width

int m_Width

Thickness of track, or via diameter.

Definition: track.h:255

References m_Width.

Referenced by TRACKS_CLEANER::cleanup(), CreateRoutesSection(), BOARD_ADAPTER::createTrack(), DIALOG_TRACK_VIA_PROPERTIES::DIALOG_TRACK_VIA_PROPERTIES(), EDIT_TOOL::DragArcTrack(), KIGFX::PCB_PAINTER::draw(), DRAWING_TOOL::DrawVia(), EDIT_TOOL::FilletTracks(), PCB_IO::format(), DSN::SPECCTRA_DB::FromBOARD(), ARC::GetEffectiveShape(), CONVERT_TOOL::getStartEndPoints(), ARC::HitTest(), VIA::HitTest(), HYPERLYNX_PAD_STACK::HYPERLYNX_PAD_STACK(), CADSTAR_PCB_ARCHIVE_LOADER::makeTracksFromDrawsegments(), PCB_EDIT_FRAME::SetTrackSegmentWidth(), PNS_KICAD_IFACE_BASE::syncArc(), PNS_KICAD_IFACE_BASE::syncTrack(), PNS_KICAD_IFACE_BASE::syncVia(), TRACK_VIA_DESC::TRACK_VIA_DESC(), BOARD_EDITOR_CONTROL::TrackWidthInc(), and ViaSort().

◆ GetWidthConstraints()

void TRACK::GetWidthConstraints	(	int *	aMin,
		int *	aMax,
		wxString *	aSource
	)		const

Definition at line 114 of file track.cpp.

 {
     *aMin = 0;
     *aMax = INT_MAX;
 
     DRC_CONSTRAINT constraint;
 
     if( GetBoard() && GetBoard()->GetDesignSettings().m_DRCEngine )
     {
         BOARD_DESIGN_SETTINGS& bds = GetBoard()->GetDesignSettings();
 
         constraint = bds.m_DRCEngine->EvalRules( TRACK_WIDTH_CONSTRAINT, this, nullptr, GetLayer() );
     }
 
     if( constraint.Value().HasMin() || constraint.Value().HasMax() )
     {
         if( constraint.Value().HasMin() )
             *aMin = constraint.Value().Min();
 
         if( constraint.Value().HasMax() )
             *aMax = constraint.Value().Max();
 
         if( aSource )
             *aSource = constraint.GetName();
     }
 }

References BOARD_ITEM::GetBoard(), BOARD::GetDesignSettings(), BOARD_ITEM::GetLayer(), DRC_CONSTRAINT::GetName(), MINOPTMAX< T >::HasMax(), MINOPTMAX< T >::HasMin(), BOARD_DESIGN_SETTINGS::m_DRCEngine, MINOPTMAX< T >::Max(), MINOPTMAX< T >::Min(), TRACK_WIDTH_CONSTRAINT, and DRC_CONSTRAINT::Value().

Referenced by GetMsgPanelInfo().

◆ GetX()

int BOARD_ITEM::GetX ( ) const

inlineinherited

Definition at line 97 of file board_item.h.

     {
         wxPoint p = GetPosition();
         return p.x;
     }

References EDA_ITEM::GetPosition().

Referenced by BOARD_ITEM_DESC::BOARD_ITEM_DESC(), ALIGN_DISTRIBUTE_TOOL::DistributeHorizontally(), ALIGN_DISTRIBUTE_TOOL::doDistributeGapsHorizontally(), BOARD_ITEM::SetY(), and TRACK_VIA_DESC::TRACK_VIA_DESC().

◆ GetY()

int BOARD_ITEM::GetY ( ) const

inlineinherited

Definition at line 103 of file board_item.h.

     {
         wxPoint p = GetPosition();
         return p.y;
     }

References EDA_ITEM::GetPosition().

Referenced by BOARD_ITEM_DESC::BOARD_ITEM_DESC(), ALIGN_DISTRIBUTE_TOOL::DistributeVertically(), ALIGN_DISTRIBUTE_TOOL::doDistributeGapsVertically(), BOARD_ITEM::SetX(), and TRACK_VIA_DESC::TRACK_VIA_DESC().

◆ HasFlag()

bool EDA_ITEM::HasFlag ( STATUS_FLAGS aFlag ) const

inlineinherited

Definition at line 206 of file eda_item.h.

206 { return ( m_flags & aFlag ) == aFlag; }

STATUS_FLAGS m_flags

Definition: eda_item.h:531

References EDA_ITEM::m_flags.

Referenced by TRACKS_CLEANER::cleanup(), GRAPHICS_CLEANER::cleanupSegments(), SCH_EDIT_TOOL::DoDelete(), KIGFX::SCH_PAINTER::draw(), SCH_MOVE_TOOL::getConnectedDragItems(), SCH_MOVE_TOOL::moveItem(), SYMBOL_EDITOR_PIN_TOOL::PlacePin(), SCH_EDIT_TOOL::Rotate(), and EE_TOOL_BASE< SCH_BASE_FRAME >::saveCopyInUndoList().

◆ HitTest() [1/2]

bool TRACK::HitTest	(	const wxPoint &	aPosition,
		int	aAccuracy = `0`
	)		const

overridevirtual

Test if aPosition is contained within or on the bounding box of an item.

Parameters

aPosition	A reference to a wxPoint object containing the coordinates to test.
aAccuracy	Increase the item bounding box by this amount.

Returns: True if aPosition is within the item bounding box.

Reimplemented from EDA_ITEM.

Reimplemented in VIA, and ARC.

Definition at line 800 of file track.cpp.

 {
     return TestSegmentHit( aPosition, m_Start, m_End, aAccuracy + ( m_Width / 2 ) );
 }

References m_End, m_Start, m_Width, and TestSegmentHit().

◆ HitTest() [2/2]

bool TRACK::HitTest	(	const EDA_RECT &	aRect,
		bool	aContained,
		int	aAccuracy = `0`
	)		const

overridevirtual

Test if aRect intersects or is contained within the bounding box of an item.

Parameters

aRect	A reference to a EDA_RECT object containing the rectangle to test.
aContained	Set to true to test for containment instead of an intersection.
aAccuracy	Increase aRect by this amount.

Returns: True if aRect contains or intersects the item bounding box.

Reimplemented from EDA_ITEM.

Reimplemented in VIA, and ARC.

Definition at line 853 of file track.cpp.

 {
     EDA_RECT arect = aRect;
     arect.Inflate( aAccuracy );
 
     if( aContained )
         return arect.Contains( GetStart() ) && arect.Contains( GetEnd() );
     else
         return arect.Intersects( GetStart(), GetEnd() );
 }

References EDA_RECT::Contains(), GetEnd(), GetStart(), EDA_RECT::Inflate(), and EDA_RECT::Intersects().

◆ IsBrightened()

bool EDA_ITEM::IsBrightened ( ) const

inlineinherited

Definition at line 176 of file eda_item.h.

176 { return m_flags & BRIGHTENED; }

BRIGHTENED

#define BRIGHTENED

item is drawn with a bright contour

Definition: eda_item.h:131

STATUS_FLAGS m_flags

Definition: eda_item.h:531

References BRIGHTENED, and EDA_ITEM::m_flags.

Referenced by GERBVIEW_SELECTION_TOOL::disambiguationMenu(), KIGFX::SCH_PAINTER::draw(), KIGFX::GERBVIEW_PAINTER::draw(), KIGFX::DS_RENDER_SETTINGS::GetColor(), KIGFX::PCB_RENDER_SETTINGS::GetColor(), KIGFX::SCH_PAINTER::getRenderColor(), SCH_EDITOR_CONTROL::UpdateFind(), and SCH_EDITOR_CONTROL::UpdateNetHighlighting().

◆ IsConnected()

bool BOARD_CONNECTED_ITEM::IsConnected ( ) const

inlineoverridevirtualinherited

Returns information if the object is derived from BOARD_CONNECTED_ITEM.

Returns: True if the object is of BOARD_CONNECTED_ITEM type, false otherwise.

Reimplemented from BOARD_ITEM.

Reimplemented in ZONE.

Definition at line 69 of file board_connected_item.h.

     {
         return true;
     }

Referenced by BOARD_INSPECTION_TOOL::InspectClearance().

◆ IsDragging()

bool EDA_ITEM::IsDragging ( ) const

inlineinherited

Definition at line 171 of file eda_item.h.

171 { return m_flags & IS_DRAGGED; }

IS_DRAGGED

#define IS_DRAGGED

Item being dragged.

Definition: eda_item.h:109

STATUS_FLAGS m_flags

Definition: eda_item.h:531

References IS_DRAGGED, and EDA_ITEM::m_flags.

Referenced by DIALOG_SYMBOL_PROPERTIES::DIALOG_SYMBOL_PROPERTIES().

◆ IsEntered()

bool EDA_ITEM::IsEntered ( ) const

inlineinherited

Definition at line 174 of file eda_item.h.

174 { return m_flags & ENTERED; }

ENTERED

#define ENTERED

indicates a group has been entered

Definition: eda_item.h:138

Referenced by BOARD_ITEM_DESC::BOARD_ITEM_DESC(), PCB_CONTROL::DeleteItemCursor(), DIALOG_TRACK_VIA_PROPERTIES::DIALOG_TRACK_VIA_PROPERTIES(), EDIT_TOOL::doMoveSelection(), EDIT_TOOL::FilletTracks(), PCB_IO::format(), PCB_TEXT::GetMsgPanelInfo(), ZONE::GetMsgPanelInfo(), FP_TEXT::GetMsgPanelInfo(), DIMENSION_BASE::GetMsgPanelInfo(), PCB_SHAPE::GetMsgPanelInfo(), GetMsgPanelInfoBase_Common(), ALIGN_DISTRIBUTE_TOOL::GetSelections(), GENERAL_COLLECTOR::Inspect(), PAD::IsLocked(), PCB_SELECTION_TOOL::itemPassesFilter(), CADSTAR_PCB_ARCHIVE_LOADER::makeTracksFromDrawsegments(), TRACKS_CLEANER::mergeCollinearSegments(), BOARD_EDITOR_CONTROL::modifyLockSelected(), ZONE_SETTINGS::operator<<(), POSITION_RELATIVE_TOOL::PositionRelative(), processTextItem(), PCB_SELECTION_TOOL::RequestSelection(), PNS_KICAD_IFACE_BASE::syncArc(), PNS_KICAD_IFACE_BASE::syncTrack(), PNS_KICAD_IFACE_BASE::syncVia(), DIALOG_GRAPHIC_ITEM_PROPERTIES::TransferDataToWindow(), and DIALOG_TEXT_PROPERTIES::TransferDataToWindow().

STATUS_FLAGS m_flags

Definition: eda_item.h:531

References ENTERED, and EDA_ITEM::m_flags.

Referenced by KIGFX::PCB_PAINTER::draw().

◆ IsForceVisible()

bool EDA_ITEM::IsForceVisible ( ) const

inlineinherited

Definition at line 256 of file eda_item.h.

256 { return m_forceVisible; }

EDA_ITEM::m_forceVisible

bool m_forceVisible

Definition: eda_item.h:530

References EDA_ITEM::m_forceVisible.

Referenced by KIGFX::SCH_PAINTER::draw(), and SCH_FIELD::Print().

◆ IsLocked()

virtual bool BOARD_ITEM::IsLocked ( ) const

inlinevirtualinherited

Returns: true if the object is locked, else false.

Reimplemented in FOOTPRINT, and PAD.

Definition at line 249 of file board_item.h.

     {
         return GetState( LOCKED );
     }

References EDA_ITEM::GetState(), and LOCKED.

◆ IsModified()

bool EDA_ITEM::IsModified ( ) const

inlineinherited

Definition at line 168 of file eda_item.h.

168 { return m_flags & IS_CHANGED; }

IS_CHANGED

#define IS_CHANGED

Item was edited, and modified.

Definition: eda_item.h:103

STATUS_FLAGS m_flags

Definition: eda_item.h:531

References IS_CHANGED, and EDA_ITEM::m_flags.

Referenced by PCB_EDIT_FRAME::OpenProjectFiles().

◆ IsMoving()

bool EDA_ITEM::IsMoving ( ) const

inlineinherited

Definition at line 170 of file eda_item.h.

170 { return m_flags & IS_MOVED; }

IS_MOVED

#define IS_MOVED

Item being moved.

Definition: eda_item.h:106

STATUS_FLAGS m_flags

Definition: eda_item.h:531

References IS_MOVED, and EDA_ITEM::m_flags.

Referenced by SCH_EDIT_FRAME::AddItemToScreenAndUndoList(), LIB_PIN::CalcEdit(), LIB_ARC::CalcRadiusAngles(), KIGFX::SCH_PAINTER::draw(), SYMBOL_EDITOR_EDIT_TOOL::Duplicate(), SYMBOL_EDITOR_EDIT_TOOL::Mirror(), SCH_EDIT_TOOL::Mirror(), PCB_BASE_FRAME::PlaceFootprint(), SYMBOL_EDITOR_EDIT_TOOL::Rotate(), and SCH_EDIT_TOOL::Rotate().

◆ IsNew()

bool EDA_ITEM::IsNew ( ) const

inlineinherited

Definition at line 169 of file eda_item.h.

169 { return m_flags & IS_NEW; }

Referenced by SCH_EDIT_FRAME::AddItemToScreenAndUndoList(), SCH_EDIT_TOOL::AutoplaceFields(), SCH_EDIT_TOOL::ConvertDeMorgan(), EDIT_TOOL::DragArcTrack(), SYMBOL_EDITOR_EDIT_TOOL::Duplicate(), SCH_EDIT_TOOL::Duplicate(), SYMBOL_EDITOR_PIN_TOOL::EditPinProperties(), SYMBOL_EDITOR_DRAWING_TOOLS::Init(), SCH_LINE_WIRE_BUS_TOOL::IsDrawingLineWireOrBus(), EE_POINT_EDITOR::Main(), SYMBOL_EDITOR_MOVE_TOOL::Main(), PL_POINT_EDITOR::Main(), SCH_MOVE_TOOL::Main(), EDIT_TOOL::MoveExact(), PCB_BASE_FRAME::PlaceFootprint(), SYMBOL_EDITOR_PIN_TOOL::PlacePin(), SCH_EDIT_FRAME::SaveSymbolToSchematic(), DIALOG_SHEET_PIN_PROPERTIES::TransferDataFromWindow(), DIALOG_SHEET_PROPERTIES::TransferDataFromWindow(), DIALOG_LABEL_EDITOR::TransferDataFromWindow(), and DIALOG_SHEET_PROPERTIES::TransferDataToWindow().

STATUS_FLAGS m_flags

Definition: eda_item.h:531

IS_NEW

#define IS_NEW

New item, just created.

Definition: eda_item.h:107

References IS_NEW, and EDA_ITEM::m_flags.

◆ IsNull()

bool TRACK::IsNull ( ) const

inline

Function IsNull returns true if segment length is zero.

Definition at line 178 of file track.h.

     {
         return ( Type() == PCB_VIA_T ) || ( m_Start == m_End );
     }

References m_End, m_Start, PCB_VIA_T, and EDA_ITEM::Type().

◆ IsOnCopperLayer()

bool TRACK::IsOnCopperLayer ( ) const

inlineoverridevirtual

Returns: true because a track or a via is always on a copper layer.

Reimplemented from BOARD_ITEM.

Definition at line 229 of file track.h.

     {
         return true;
     }

◆ IsOnLayer()

virtual bool BOARD_ITEM::IsOnLayer ( PCB_LAYER_ID aLayer ) const

inlinevirtualinherited

Test to see if this object is on the given layer.

Virtual so objects like PAD, which reside on multiple layers can do their own form of testing.

Parameters

aLayer The layer to test for.

Returns: true if on given layer, else false.

Reimplemented in PAD, VIA, FOOTPRINT, ZONE, and PCB_GROUP.

Definition at line 231 of file board_item.h.

     {
         return m_layer == aLayer;
     }

References BOARD_ITEM::m_layer.

Referenced by BOARD_ADAPTER::createLayers(), existsOnLayer(), GENERAL_COLLECTOR::Inspect(), PCB_LAYER_COLLECTOR::Inspect(), and PNS_KICAD_IFACE::IsItemVisible().

◆ IsPointOnEnds()

STATUS_FLAGS TRACK::IsPointOnEnds	(	const wxPoint &	point,
		int	min_dist = `0`
	)		const

Function IsPointOnEnds returns STARTPOINT if point if near (dist = min_dist) start point, ENDPOINT if point if near (dist = min_dist) end point,STARTPOINT|ENDPOINT if point if near (dist = min_dist) both ends, or 0 if none of the above.

if min_dist < 0: min_dist = track_width/2

Definition at line 188 of file track.cpp.

 {
     STATUS_FLAGS result = 0;
 
     if( min_dist < 0 )
         min_dist = m_Width / 2;
 
     if( min_dist == 0 )
     {
         if( m_Start == point  )
             result |= STARTPOINT;
 
         if( m_End == point )
             result |= ENDPOINT;
     }
     else
     {
         double dist = GetLineLength( m_Start, point );
 
         if( min_dist >= KiROUND( dist ) )
             result |= STARTPOINT;
 
         dist = GetLineLength( m_End, point );
 
         if( min_dist >= KiROUND( dist ) )
             result |= ENDPOINT;
     }
 
     return result;
 }

References ENDPOINT, GetLineLength(), KiROUND(), m_End, m_Start, m_Width, and STARTPOINT.

Referenced by EDIT_TOOL::FilletTracks(), and ROUTER_TOOL::NeighboringSegmentFilter().

◆ IsReplaceable()

virtual bool EDA_ITEM::IsReplaceable ( ) const

inlinevirtualinherited

Override this method in any derived object that supports test find and replace.

Returns: True if the item has replaceable text that can be modified using the find and replace dialog.

Reimplemented in SCH_COMPONENT, SCH_LABEL, SCH_SHEET, SCH_TEXT, SCH_FIELD, and SCH_SHEET_PIN.

Definition at line 453 of file eda_item.h.

453 { return false; }

Referenced by EDA_ITEM::Matches().

◆ IsResized()

bool EDA_ITEM::IsResized ( ) const

inlineinherited

Definition at line 175 of file eda_item.h.

175 { return m_flags & IS_RESIZED; }

IS_RESIZED

#define IS_RESIZED

Item being resized.

Definition: eda_item.h:108

STATUS_FLAGS m_flags

Definition: eda_item.h:531

References IS_RESIZED, and EDA_ITEM::m_flags.

◆ IsSelected()

bool EDA_ITEM::IsSelected ( ) const

inlineinherited

Definition at line 173 of file eda_item.h.

173 { return m_flags & SELECTED; }

SELECTED

#define SELECTED

Definition: eda_item.h:114

Referenced by ALIGN_DISTRIBUTE_TOOL::AlignBottom(), ALIGN_DISTRIBUTE_TOOL::AlignCenterX(), ALIGN_DISTRIBUTE_TOOL::AlignCenterY(), ALIGN_DISTRIBUTE_TOOL::AlignTop(), SCH_EDIT_FRAME::ConvertPart(), DIALOG_CHANGE_SYMBOLS::DIALOG_CHANGE_SYMBOLS(), ALIGN_DISTRIBUTE_TOOL::doAlignLeft(), ALIGN_DISTRIBUTE_TOOL::doAlignRight(), ALIGN_DISTRIBUTE_TOOL::doDistributeCentersHorizontally(), ALIGN_DISTRIBUTE_TOOL::doDistributeCentersVertically(), ALIGN_DISTRIBUTE_TOOL::doDistributeGapsHorizontally(), ALIGN_DISTRIBUTE_TOOL::doDistributeGapsVertically(), KIGFX::SCH_PAINTER::draw(), KIGFX::PCB_PAINTER::Draw(), KIGFX::PCB_PAINTER::draw(), DS_PROXY_UNDO_ITEM::DS_PROXY_UNDO_ITEM(), KIGFX::DS_RENDER_SETTINGS::GetColor(), KIGFX::GERBVIEW_RENDER_SETTINGS::GetColor(), KIGFX::PCB_RENDER_SETTINGS::GetColor(), SCH_MOVE_TOOL::getConnectedDragItems(), KIGFX::SCH_PAINTER::getLineWidth(), KIGFX::SCH_PAINTER::getRenderColor(), KIGFX::SCH_PAINTER::getTextThickness(), SCH_LINE::MergeOverlap(), SCH_EDIT_TOOL::Mirror(), EDIT_TOOL::MoveExact(), SCH_MOVE_TOOL::moveItem(), BOARD_COMMIT::Push(), PCB_SELECTION_TOOL::RebuildSelection(), EE_SELECTION_TOOL::RebuildSelection(), RENDER_3D_LEGACY::renderFootprint(), SCH_EDIT_TOOL::Rotate(), EE_TOOL_BASE< SCH_BASE_FRAME >::saveCopyInUndoList(), SCH_EDIT_FRAME::SchematicCleanUp(), GERBVIEW_SELECTION_TOOL::select(), PCB_SELECTION_TOOL::select(), PCB_SELECTION_TOOL::selectionContains(), EE_SELECTION_TOOL::selectMultiple(), PCB_SELECTION_TOOL::selectMultiple(), GERBVIEW_SELECTION_TOOL::selectPoint(), KIGFX::SCH_PAINTER::setDeviceColors(), and GERBVIEW_SELECTION_TOOL::unselect().

STATUS_FLAGS m_flags

Definition: eda_item.h:531

References EDA_ITEM::m_flags, and SELECTED.

◆ IsTrack()

bool BOARD_ITEM::IsTrack ( ) const

inlineinherited

Test to see if this object is a track or via (or microvia).

Returns: true if a track or via, else false.

Definition at line 241 of file board_item.h.

     {
         return ( Type() == PCB_TRACE_T ) || ( Type() == PCB_VIA_T );
     }

References PCB_TRACE_T, PCB_VIA_T, and EDA_ITEM::Type().

◆ IsType()

virtual bool EDA_ITEM::IsType ( const KICAD_T aScanTypes[] ) const

inlinevirtualinherited

Check whether the item is one of the listed types.

Parameters

aScanTypes List of item types

Returns: true if the item type is contained in the list aScanTypes

Reimplemented in VIA, SCH_LABEL, DIMENSION_BASE, PAD, PCB_SHAPE, SCH_FIELD, FP_TEXT, SCH_LINE, FP_SHAPE, and PCB_TEXT.

Definition at line 233 of file eda_item.h.

     {
         if( aScanTypes[0] == SCH_LOCATE_ANY_T )
             return true;
 
         for( const KICAD_T* p = aScanTypes; *p != EOT; ++p )
         {
             if( m_structType == *p )
                 return true;
         }
 
         return false;
     }

References EOT, EDA_ITEM::m_structType, and SCH_LOCATE_ANY_T.

Referenced by ROUTER_TOOL::CanInlineDrag(), SCH_LINE_WIRE_BUS_TOOL::IsDrawingBus(), SCH_LINE_WIRE_BUS_TOOL::IsDrawingLine(), SCH_LINE_WIRE_BUS_TOOL::IsDrawingWire(), PCB_TEXT::IsType(), FP_SHAPE::IsType(), SCH_LINE::IsType(), FP_TEXT::IsType(), SCH_FIELD::IsType(), PCB_SHAPE::IsType(), PAD::IsType(), DIMENSION_BASE::IsType(), SCH_LABEL::IsType(), VIA::IsType(), EE_POINT_EDITOR::Main(), PL_POINT_EDITOR::Main(), EE_SELECTION_TOOL::RequestSelection(), SCH_BASE_FRAME::UpdateItem(), EDA_ITEM::Visit(), and DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS::visitItem().

◆ IsWireImage()

bool EDA_ITEM::IsWireImage ( ) const

inlineinherited

Definition at line 172 of file eda_item.h.

172 { return m_flags & IS_WIRE_IMAGE; }

IS_WIRE_IMAGE

#define IS_WIRE_IMAGE

Item to be drawn as wireframe while editing.

Definition: eda_item.h:111

STATUS_FLAGS m_flags

Definition: eda_item.h:531

References IS_WIRE_IMAGE, and EDA_ITEM::m_flags.

◆ IterateForward() [1/2]

template<class T >

static SEARCH_RESULT EDA_ITEM::IterateForward	(	std::deque< T > &	aList,
		INSPECTOR	inspector,
		void *	testData,
		const KICAD_T	scanTypes[]
	)

inlinestaticinherited

This changes first parameter to avoid the DList and use the main queue instead.

Definition at line 345 of file eda_item.h.

     {
         for( auto it : aList )
         {
             if( static_cast<EDA_ITEM*>( it )->Visit( inspector, testData, scanTypes )
                     == SEARCH_RESULT::QUIT )
                 return SEARCH_RESULT::QUIT;
         }
 
         return SEARCH_RESULT::CONTINUE;
     }

References CONTINUE, QUIT, and EDA_ITEM::Visit().

Referenced by GERBER_FILE_IMAGE::Visit().

◆ IterateForward() [2/2]

template<class T >

static SEARCH_RESULT EDA_ITEM::IterateForward	(	std::vector< T > &	aList,
		INSPECTOR	inspector,
		void *	testData,
		const KICAD_T	scanTypes[]
	)

inlinestaticinherited

Change first parameter to avoid the DList and use std::vector instead.

Definition at line 364 of file eda_item.h.

     {
         for( auto it : aList )
         {
             if( static_cast<EDA_ITEM*>( it )->Visit( inspector, testData, scanTypes )
                     == SEARCH_RESULT::QUIT )
                 return SEARCH_RESULT::QUIT;
         }
 
         return SEARCH_RESULT::CONTINUE;
     }

References CONTINUE, QUIT, and EDA_ITEM::Visit().

◆ layerMaskDescribe()

wxString BOARD_ITEM::layerMaskDescribe ( ) const

protectedvirtualinherited

Return a string (to be shown to the user) describing a layer mask.

The BOARD is needed because layer names are customizable.

Reimplemented in VIA.

Definition at line 72 of file board_item.cpp.

 {
     BOARD* board = GetBoard();
     LSET   layers = GetLayerSet();
 
     // Try to be smart and useful.  Check all copper first.
     if( layers[F_Cu] && layers[B_Cu] )
         return _( "all copper layers" );
 
     LSET copperLayers = layers & board->GetEnabledLayers().AllCuMask();
     LSET techLayers = layers & board->GetEnabledLayers().AllTechMask();
 
     for( LSET testLayers : { copperLayers, techLayers, layers } )
     {
         for( int bit = PCBNEW_LAYER_ID_START; bit < PCB_LAYER_ID_COUNT; ++bit )
         {
             if( testLayers[ bit ] )
             {
                 wxString layerInfo = board->GetLayerName( static_cast<PCB_LAYER_ID>( bit ) );
 
                 if( testLayers.count() > 1 )
                     layerInfo << wxS( " " ) + _( "and others" );
 
                 return layerInfo;
             }
         }
     }
 
     // No copper, no technicals: no layer
     return _( "no layers" );
 }

References _, LSET::AllCuMask(), LSET::AllTechMask(), B_Cu, F_Cu, BOARD_ITEM::GetBoard(), BOARD::GetEnabledLayers(), BOARD::GetLayerName(), BOARD_ITEM::GetLayerSet(), PCB_LAYER_ID_COUNT, and PCBNEW_LAYER_ID_START.

Referenced by GetMsgPanelInfo(), PAD::GetMsgPanelInfo(), and PAD::GetSelectMenuText().

◆ Matches() [1/2]

virtual bool EDA_ITEM::Matches	(	const wxFindReplaceData &	aSearchData,
		void *	aAuxData
	)		const

inlinevirtualinherited

Compare the item against the search criteria in aSearchData.

The base class returns false since many of the objects derived from EDA_ITEM do not have any text to search.

Parameters

aSearchData	A reference to a wxFindReplaceData object containing the search criteria.
aAuxData	A pointer to optional data required for the search or NULL if not used.

Returns: True if the item's text matches the search criteria in aSearchData.

Reimplemented in SCH_COMPONENT, SCH_SHEET, SCH_TEXT, SCH_FIELD, SCH_SHEET_PIN, ZONE, SCH_PIN, SCH_MARKER, PCB_MARKER, FP_TEXT, and PCB_TEXT.

Definition at line 415 of file eda_item.h.

     {
         return false;
     }

Referenced by SCH_EDITOR_CONTROL::HasMatch(), PCB_TEXT::Matches(), FP_TEXT::Matches(), PCB_MARKER::Matches(), SCH_MARKER::Matches(), SCH_PIN::Matches(), ZONE::Matches(), SCH_SHEET_PIN::Matches(), SCH_FIELD::Matches(), SCH_TEXT::Matches(), SCH_EDITOR_CONTROL::ReplaceAndFindNext(), and SCH_EDITOR_CONTROL::UpdateFind().

◆ Matches() [2/2]

bool EDA_ITEM::Matches	(	const wxString &	aText,
		const wxFindReplaceData &	aSearchData
	)		const

protectedinherited

Compare aText against search criteria in aSearchData.

This is a helper function for simplify derived class logic.

Parameters

aText	A reference to a wxString object containing the string to test.
aSearchData	The criteria to search against.

Returns: True if aText matches the search criteria in aSearchData.

Definition at line 116 of file eda_item.cpp.

 {
     wxString text = aText;
     wxString searchText = aSearchData.GetFindString();
 
     // Don't match if searching for replaceable item and the item doesn't support text replace.
     if( (aSearchData.GetFlags() & FR_SEARCH_REPLACE) && !IsReplaceable() )
         return false;
 
     if( aSearchData.GetFlags() & wxFR_WHOLEWORD )
         return aText.IsSameAs( searchText, aSearchData.GetFlags() & wxFR_MATCHCASE );
 
     if( aSearchData.GetFlags() & FR_MATCH_WILDCARD )
     {
         if( aSearchData.GetFlags() & wxFR_MATCHCASE )
             return text.Matches( searchText );
 
         return text.MakeUpper().Matches( searchText.MakeUpper() );
     }
 
     if( aSearchData.GetFlags() & wxFR_MATCHCASE )
         return aText.Find( searchText ) != wxNOT_FOUND;
 
     return text.MakeUpper().Find( searchText.MakeUpper() ) != wxNOT_FOUND;
 }

References FR_MATCH_WILDCARD, FR_SEARCH_REPLACE, EDA_ITEM::IsReplaceable(), and text.

◆ Move() [1/2]

void TRACK::Move ( const wxPoint & aMoveVector )

inlineoverridevirtual

Move this object.

Parameters

aMoveVector the move vector for this object.

Reimplemented from BOARD_ITEM.

Reimplemented in ARC.

Definition at line 95 of file track.h.

     {
         m_Start += aMoveVector;
         m_End   += aMoveVector;
     }

References m_End, and m_Start.

◆ Move() [2/2]

void BOARD_ITEM::Move ( const VECTOR2I & aMoveVector )

inlineinherited

Definition at line 283 of file board_item.h.

     {
         Move( wxPoint( aMoveVector.x, aMoveVector.y ) );
     }

References BOARD_ITEM::Move(), VECTOR2< T >::x, and VECTOR2< T >::y.

◆ operator<()

bool EDA_ITEM::operator< ( const EDA_ITEM & aItem ) const

inherited

Test if another item is less than this object.

Parameters

aItem - Item to compare against.

Returns: - True if aItem is less than the item.

Definition at line 169 of file eda_item.cpp.

 {
     wxFAIL_MSG( wxString::Format( wxT( "Less than operator not defined for item type %s." ),
                                  GetClass() ) );
 
     return false;
 }

References Format(), and EDA_ITEM::GetClass().

◆ Replace() [1/2]

bool EDA_ITEM::Replace	(	const wxFindReplaceData &	aSearchData,
		wxString &	aText
	)

staticinherited

Perform a text replace on aText using the find and replace criteria in aSearchData on items that support text find and replace.

Parameters

aSearchData	A reference to a wxFindReplaceData object containing the search and replace criteria.
aText	A reference to a wxString object containing the text to be replaced.

Returns: True if aText was modified, otherwise false.

Definition at line 143 of file eda_item.cpp.

 {
     wxString searchString = (aSearchData.GetFlags() & wxFR_MATCHCASE) ? aText : aText.Upper();
 
     int result = searchString.Find( (aSearchData.GetFlags() & wxFR_MATCHCASE) ?
                                     aSearchData.GetFindString() :
                                     aSearchData.GetFindString().Upper() );
 
     if( result == wxNOT_FOUND )
         return false;
 
     wxString prefix = aText.Left( result );
     wxString suffix;
 
     if( aSearchData.GetFindString().length() + result < aText.length() )
         suffix = aText.Right( aText.length() - ( aSearchData.GetFindString().length() + result ) );
 
     wxLogTrace( traceFindReplace, wxT( "Replacing '%s', prefix '%s', replace '%s', suffix '%s'." ),
                 aText, prefix, aSearchData.GetReplaceString(), suffix );
 
     aText = prefix + aSearchData.GetReplaceString() + suffix;
 
     return true;
 }

References traceFindReplace.

Referenced by SCH_FIELD::Replace(), EDA_TEXT::Replace(), and SCH_EDITOR_CONTROL::ReplaceAndFindNext().

◆ Replace() [2/2]

virtual bool EDA_ITEM::Replace	(	const wxFindReplaceData &	aSearchData,
		void *	aAuxData = `nullptr`
	)

inlinevirtualinherited

Perform a text replace using the find and replace criteria in aSearchData on items that support text find and replace.

This function must be overridden for items that support text replace.

Parameters

aSearchData	A reference to a wxFindReplaceData object containing the search and replace criteria.
aAuxData	A pointer to optional data required for the search or NULL if not used.

Returns: True if the item text was modified, otherwise false.

Reimplemented in SCH_TEXT, SCH_FIELD, SCH_SHEET_PIN, and SCH_PIN.

Definition at line 442 of file eda_item.h.

     {
         return false;
     }

◆ Rotate() [1/2]

void TRACK::Rotate	(	const wxPoint &	aRotCentre,
		double	aAngle
	)

overridevirtual

Rotate this object.

Parameters

aRotCentre	the rotation point.
aAngle	the rotation angle in 0.1 degree.

Reimplemented from BOARD_ITEM.

Reimplemented in ARC.

Definition at line 266 of file track.cpp.

 {
     RotatePoint( &m_Start, aRotCentre, aAngle );
     RotatePoint( &m_End, aRotCentre, aAngle );
 }

References m_End, m_Start, and RotatePoint().

◆ Rotate() [2/2]

void BOARD_ITEM::Rotate	(	const VECTOR2I &	aRotCentre,
		double	aAngle
	)

inlineinherited

Definition at line 299 of file board_item.h.

     {
         Rotate( wxPoint( aRotCentre.x, aRotCentre.y ), aAngle );
     }

References BOARD_ITEM::Rotate(), VECTOR2< T >::x, and VECTOR2< T >::y.

◆ Set() [1/3]

bool INSPECTABLE::Set	(	PROPERTY_BASE *	aProperty,
		wxAny &	aValue
	)

inlineinherited

Definition at line 42 of file inspectable.h.

     {
         PROPERTY_MANAGER& propMgr = PROPERTY_MANAGER::Instance();
         TYPE_ID thisType = TYPE_HASH( *this );
         void* object = propMgr.TypeCast( this, thisType, aProperty->OwnerHash() );
 
         if( object )
             aProperty->setter( object, aValue );
 
         return object != nullptr;
     }

References PROPERTY_MANAGER::Instance(), PROPERTY_BASE::OwnerHash(), PROPERTY_BASE::setter(), TYPE_HASH, and PROPERTY_MANAGER::TypeCast().

Referenced by isCoupledDiffPair().

◆ Set() [2/3]

template<typename T >

bool INSPECTABLE::Set	(	PROPERTY_BASE *	aProperty,
		T	aValue
	)

inlineinherited

Definition at line 55 of file inspectable.h.

     {
         PROPERTY_MANAGER& propMgr = PROPERTY_MANAGER::Instance();
         TYPE_ID thisType = TYPE_HASH( *this );
         void* object = propMgr.TypeCast( this, thisType, aProperty->OwnerHash() );
 
         if( object )
             aProperty->set<T>( object, aValue );
 
         return object != nullptr;
     }

References PROPERTY_MANAGER::Instance(), PROPERTY_BASE::OwnerHash(), PROPERTY_BASE::set(), TYPE_HASH, and PROPERTY_MANAGER::TypeCast().

◆ Set() [3/3]

template<typename T >

bool INSPECTABLE::Set	(	const wxString &	aProperty,
		T	aValue
	)

inlineinherited

Definition at line 68 of file inspectable.h.

     {
         PROPERTY_MANAGER& propMgr = PROPERTY_MANAGER::Instance();
         TYPE_ID thisType = TYPE_HASH( *this );
         PROPERTY_BASE* prop = propMgr.GetProperty( thisType, aProperty );
         void* object = nullptr;
 
         if( prop )
         {
             object = propMgr.TypeCast( this, thisType, prop->OwnerHash() );
 
             if( object )
                 prop->set<T>( object, aValue );
         }
 
         return object != nullptr;
     }

References PROPERTY_MANAGER::GetProperty(), PROPERTY_MANAGER::Instance(), PROPERTY_BASE::OwnerHash(), PROPERTY_BASE::set(), TYPE_HASH, and PROPERTY_MANAGER::TypeCast().

◆ SetBrightened()

void EDA_ITEM::SetBrightened ( )

inlineinherited

Definition at line 180 of file eda_item.h.

180 { SetFlags( BRIGHTENED ); }

BRIGHTENED

#define BRIGHTENED

item is drawn with a bright contour

Definition: eda_item.h:131

EDA_ITEM::SetFlags

void SetFlags(STATUS_FLAGS aMask)

Definition: eda_item.h:203

References BRIGHTENED, and EDA_ITEM::SetFlags().

Referenced by GERBVIEW_SELECTION_TOOL::disambiguationMenu(), KIGFX::SCH_PAINTER::draw(), PCB_BASE_FRAME::FocusOnItem(), SCH_EDIT_FRAME::FocusOnItem(), PL_SELECTION_TOOL::highlight(), EE_SELECTION_TOOL::highlight(), PCB_SELECTION_TOOL::highlightInternal(), and SCH_EDITOR_CONTROL::UpdateNetHighlighting().

◆ SetEnd()

void TRACK::SetEnd ( const wxPoint & aEnd )

inline

Definition at line 112 of file track.h.

112 { m_End = aEnd; }

Referenced by PNS_KICAD_IFACE::AddItem(), PCAD2KICAD::PCB_LINE::AddToBoard(), EDIT_TOOL::DragArcTrack(), DRAWING_TOOL::DrawVia(), EDIT_TOOL::FilletTracks(), EAGLE_PLUGIN::loadSignals(), LEGACY_PLUGIN::loadTrackList(), DSN::SPECCTRA_DB::makeTRACK(), CADSTAR_PCB_ARCHIVE_LOADER::makeTracksFromDrawsegments(), TRACKS_CLEANER::mergeCollinearSegments(), ALTIUM_PCB::ParseTracks6Data(), CONVERT_TOOL::PolyToLines(), CONVERT_TOOL::SegmentToArc(), DIALOG_TRACK_VIA_PROPERTIES::TransferDataFromWindow(), and PNS_KICAD_IFACE::UpdateItem().

wxPoint m_End

Line end point.

Definition: track.h:257

References m_End.

◆ SetEndX()

void TRACK::SetEndX ( int aX )

inline

Definition at line 118 of file track.h.

118 { m_End.x = aX; }

wxPoint m_End

Line end point.

Definition: track.h:257

References m_End.

Referenced by TRACK_VIA_DESC::TRACK_VIA_DESC().

◆ SetEndY()

void TRACK::SetEndY ( int aY )

inline

Definition at line 119 of file track.h.

119 { m_End.y = aY; }

wxPoint m_End

Line end point.

Definition: track.h:257

References m_End.

Referenced by TRACK_VIA_DESC::TRACK_VIA_DESC().

◆ SetFlags()

void EDA_ITEM::SetFlags ( STATUS_FLAGS aMask )

inlineinherited

Definition at line 203 of file eda_item.h.

203 { m_flags |= aMask; }

Referenced by CADSTAR_PCB_ARCHIVE_LOADER::addAttribute(), PNS_KICAD_IFACE::AddItem(), PCAD2KICAD::PCB_ARC::AddToBoard(), PCAD2KICAD::PCB_LINE::AddToBoard(), PCAD2KICAD::PCB_FOOTPRINT::AddToBoard(), PCAD2KICAD::PCB_ARC::AddToFootprint(), PCAD2KICAD::PCB_LINE::AddToFootprint(), PCAD2KICAD::PCB_POLYGON::AddToFootprint(), BOARD_CONNECTED_ITEM_DESC::BOARD_CONNECTED_ITEM_DESC(), BOARD_ITEM_DESC::BOARD_ITEM_DESC(), BOOST_AUTO_TEST_CASE(), ZONE_CREATE_HELPER::commitZone(), MICROWAVE_TOOL::createMicrowaveInductor(), PCB_BASE_FRAME::CreateNewFootprint(), MICROWAVE_TOOL::createPolygonShape(), EDIT_TOOL::DragArcTrack(), DRAWING_TOOL::drawArc(), DRAWING_TOOL::DrawBoardCharacteristics(), CADSTAR_PCB_ARCHIVE_LOADER::drawCadstarShape(), CADSTAR_PCB_ARCHIVE_LOADER::drawCadstarText(), DRAWING_TOOL::DrawSpecificationStackup(), PAD_TOOL::explodePad(), EDIT_TOOL::FilletTracks(), PCB_TARGET::Flip(), PCB_TEXT::Flip(), Flip(), FP_SHAPE::Flip(), FP_TEXT::Flip(), FOOTPRINT::Flip(), ARC::Flip(), PCB_SHAPE::Flip(), FOOTPRINT_DESC::FOOTPRINT_DESC(), FP_TEXT::FP_TEXT(), ALTIUM_PCB::HelperCreateBoardOutline(), ALTIUM_PCB::HelperParseDimensions6Datum(), ALTIUM_PCB::HelperParseDimensions6Leader(), ALTIUM_PCB::HelperParsePad6NonCopper(), initTextTable(), CONVERT_TOOL::LinesToPoly(), LEGACY_PLUGIN::loadFOOTPRINT(), FABMASTER::loadFootprints(), FABMASTER::loadGraphics(), LEGACY_PLUGIN::loadMODULE_TEXT(), CADSTAR_PCB_ARCHIVE_LOADER::loadNetTracks(), LEGACY_PLUGIN::loadPCB_TEXT(), EAGLE_PLUGIN::loadPlain(), FABMASTER::loadPolygon(), EAGLE_PLUGIN::loadSignals(), LEGACY_PLUGIN::loadTrackList(), main(), DSN::SPECCTRA_DB::makeTRACK(), CADSTAR_PCB_ARCHIVE_LOADER::makeTracksFromDrawsegments(), GRAPHICS_CLEANER::mergeRects(), DIALOG_FOOTPRINT_PROPERTIES_FP_EDITOR::OnAddField(), DIALOG_FOOTPRINT_PROPERTIES::OnAddField(), EAGLE_PLUGIN::packageCircle(), EAGLE_PLUGIN::packagePolygon(), EAGLE_PLUGIN::packageRectangle(), EAGLE_PLUGIN::packageText(), EAGLE_PLUGIN::packageWire(), ALTIUM_PCB::ParseArcs6Data(), ALTIUM_PCB::ParseComponents6Data(), ALTIUM_PCB::ParseFills6Data(), GPCB_FPL_CACHE::parseFOOTPRINT(), ALTIUM_PCB::ParseShapeBasedRegions6Data(), ALTIUM_PCB::ParseTexts6Data(), ALTIUM_PCB::ParseTracks6Data(), DRAWING_TOOL::PlaceCharacteristics(), DRAWING_TOOL::PlaceStackup(), BOARD_EDITOR_CONTROL::PlaceTarget(), DRAWING_TOOL::PlaceText(), BRDITEMS_PLOTTER::PlotDimension(), BRDITEMS_PLOTTER::PlotPcbTarget(), CONVERT_TOOL::PolyToLines(), DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS::processItem(), DIALOG_GLOBAL_EDIT_TEXT_AND_GRAPHICS::processItem(), processTextItem(), PNS_PCBNEW_RULE_RESOLVER::QueryConstraint(), DIALOG_PAD_PROPERTIES::redraw(), CLIPBOARD_IO::SaveSelection(), CONVERT_TOOL::SegmentToArc(), DIMENSION_BASE::SetLayer(), GLOBAL_EDIT_TOOL::swapBoardItem(), TRACK_VIA_DESC::TRACK_VIA_DESC(), DIALOG_TRACK_VIA_PROPERTIES::TransferDataFromWindow(), DIALOG_GRAPHIC_ITEM_PROPERTIES::TransferDataFromWindow(), and DIALOG_TEXT_PROPERTIES::TransferDataFromWindow().

STATUS_FLAGS m_flags

Definition: eda_item.h:531

References EDA_ITEM::m_flags.

◆ SetForceVisible()

void EDA_ITEM::SetForceVisible ( bool aEnable )

inlineinherited

Set and clear force visible flag used to force the item to be drawn even if it's draw attribute is set to not visible.

Parameters

aEnable True forces the item to be drawn. False uses the item's visibility setting to determine if the item is to be drawn.

Definition at line 254 of file eda_item.h.

254 { m_forceVisible = aEnable; }

EDA_ITEM::m_forceVisible

bool m_forceVisible

Definition: eda_item.h:530

References EDA_ITEM::m_forceVisible.

Referenced by SCH_EDITOR_CONTROL::UpdateFind().

◆ SetLayer()

virtual void BOARD_ITEM::SetLayer ( PCB_LAYER_ID aLayer )

inlinevirtualinherited

Set the layer this item is on.

This method is virtual because some items (in fact: class DIMENSION) have a slightly different initialization.

Parameters

aLayer The layer number.

Reimplemented in DIMENSION_BASE, ZONE, and PCB_GROUP.

Definition at line 194 of file board_item.h.

     {
         m_layer = aLayer;
     }

References BOARD_ITEM::m_layer.

◆ SetLayerSet()

virtual void BOARD_ITEM::SetLayerSet ( LSET aLayers )

inlinevirtualinherited

Reimplemented in VIA, PAD, and ZONE.

Definition at line 179 of file board_item.h.

     {
         wxFAIL_MSG( "Attempted to SetLayerSet() on a single-layer object." );
 
         // Derived classes which support multiple layers must implement this
     }

Referenced by PANEL_SETUP_LAYERS::TransferDataFromWindow().

◆ SetLocalRatsnestVisible()

void BOARD_CONNECTED_ITEM::SetLocalRatsnestVisible ( bool aVisible )

inlineinherited

Definition at line 190 of file board_connected_item.h.

     {
         m_localRatsnestVisible = aVisible;
     }

References BOARD_CONNECTED_ITEM::m_localRatsnestVisible.

◆ SetLocked()

virtual void BOARD_ITEM::SetLocked ( bool aLocked )

inlinevirtualinherited

Modify the 'lock' status for of the item.

Reimplemented in FOOTPRINT.

Definition at line 257 of file board_item.h.

     {
         SetState( LOCKED, aLocked );
     }

References LOCKED, and EDA_ITEM::SetState().

Referenced by BOARD_ITEM_DESC::BOARD_ITEM_DESC(), ZONE_SETTINGS::ExportSetting(), FOOTPRINT_EDIT_FRAME::LoadFootprintFromBoard(), CADSTAR_PCB_ARCHIVE_LOADER::loadGroups(), CADSTAR_PCB_ARCHIVE_LOADER::loadNetTracks(), CADSTAR_PCB_ARCHIVE_LOADER::makeTracksFromDrawsegments(), BOARD_EDITOR_CONTROL::modifyLockSelected(), ALTIUM_PCB::ParsePolygons6Data(), processTextItem(), DIALOG_TRACK_VIA_PROPERTIES::TransferDataFromWindow(), DIALOG_GRAPHIC_ITEM_PROPERTIES::TransferDataFromWindow(), DIALOG_TEXT_PROPERTIES::TransferDataFromWindow(), and DIALOG_PAD_PROPERTIES::TransferDataFromWindow().

◆ SetModified()

void EDA_ITEM::SetModified ( )

inherited

Definition at line 63 of file eda_item.cpp.

 {
     SetFlags( IS_CHANGED );
 
     // If this a child object, then the parent modification state also needs to be set.
     if( m_parent )
         m_parent->SetModified();
 }

References IS_CHANGED, EDA_ITEM::m_parent, EDA_ITEM::SetFlags(), and EDA_ITEM::SetModified().

Referenced by SYMBOL_EDITOR_PIN_TOOL::EditPinProperties(), LEGACY_PLUGIN::loadZONE_CONTAINER(), SCH_LINE::Move(), SCH_COMPONENT::Move(), SCH_LINE::MoveEnd(), SCH_LINE::MoveStart(), LIB_PIN::MoveTo(), PCB_EDIT_FRAME::OpenProjectFiles(), ALTIUM_PCB::Parse(), SCH_ALTIUM_PLUGIN::ParseFileHeader(), LIB_PART::RemoveDrawItem(), SCH_COMPONENT::SetConvert(), SCH_COMPONENT::SetLibId(), EDA_ITEM::SetModified(), LIB_FIELD::SetName(), SCH_COMPONENT::SetTransform(), and SCH_COMPONENT::SetUnit().

◆ SetNet()

void BOARD_CONNECTED_ITEM::SetNet ( NETINFO_ITEM * aNetInfo )

inlineinherited

Set a NET_INFO object for the item.

Definition at line 85 of file board_connected_item.h.

     {
         m_netinfo = aNetInfo;
     }

References BOARD_CONNECTED_ITEM::m_netinfo.

Referenced by BOOST_AUTO_TEST_CASE(), EDIT_TOOL::DragArcTrack(), EDIT_TOOL::FilletTracks(), CADSTAR_PCB_ARCHIVE_LOADER::loadCoppers(), FABMASTER::loadFootprints(), CADSTAR_PCB_ARCHIVE_LOADER::loadNets(), CADSTAR_PCB_ARCHIVE_LOADER::loadTemplates(), FABMASTER::loadVias(), FABMASTER::loadZone(), main(), and CADSTAR_PCB_ARCHIVE_LOADER::makeTracksFromDrawsegments().

◆ SetNetCode() [1/2]

bool BOARD_CONNECTED_ITEM::SetNetCode	(	int	aNetCode,
		bool	aNoAssert
	)

inherited

Set net using a net code.

Note: Pads not on copper layers will have their net code always set to 0 (not connected).

Parameters

aNetCode	is a net code for the new net. It has to exist in NETINFO_LIST held by BOARD.
aNoAssert	if true, do not assert that the net exists. Otherwise, item is assigned to the unconnected net.

Returns: true on success, false if the net did not exist

Definition at line 43 of file board_connected_item.cpp.

 {
     if( !IsOnCopperLayer() )
         aNetCode = 0;
 
     // if aNetCode < 0 (typically NETINFO_LIST::FORCE_ORPHANED) or no parent board,
     // set the m_netinfo to the dummy NETINFO_LIST::ORPHANED
 
     BOARD* board = GetBoard();
 
     if( ( aNetCode >= 0 ) && board )
         m_netinfo = board->FindNet( aNetCode );
     else
         m_netinfo = NETINFO_LIST::OrphanedItem();
 
     if( !aNoAssert )
         wxASSERT( m_netinfo );
 
     return ( m_netinfo != NULL );
 }

References BOARD::FindNet(), BOARD_ITEM::GetBoard(), BOARD_ITEM::IsOnCopperLayer(), BOARD_CONNECTED_ITEM::m_netinfo, NULL, and NETINFO_LIST::OrphanedItem().

Referenced by BOARD::AddArea(), PNS_KICAD_IFACE::AddItem(), PCAD2KICAD::PCB_LINE::AddToBoard(), PCAD2KICAD::PCB_POLYGON::AddToBoard(), BOARD_CONNECTED_ITEM_DESC::BOARD_CONNECTED_ITEM_DESC(), BOARD_NETLIST_UPDATER::deleteSinglePadNets(), PCB_EDIT_FRAME::Edit_Zone_Params(), ZONE_SETTINGS::ExportSetting(), FOOTPRINT::FOOTPRINT(), FP_ZONE::FP_ZONE(), ROUTER_TOOL::handleLayerSwitch(), FABMASTER::loadFootprints(), EAGLE_PLUGIN::loadPlain(), EAGLE_PLUGIN::loadSignals(), LEGACY_PLUGIN::loadTrackList(), DSN::SPECCTRA_DB::makeTRACK(), FOOTPRINT::operator=(), ALTIUM_PCB::ParseArcs6Data(), ALTIUM_PCB::ParseFills6Data(), ALTIUM_PCB::ParsePolygons6Data(), ALTIUM_PCB::ParseTracks6Data(), BOARD_CONNECTED_ITEM::SetNetCode(), DIALOG_PAD_PROPERTIES::TransferDataFromWindow(), DIALOG_PAD_PROPERTIES::transferDataToPad(), and PNS_KICAD_IFACE::UpdateItem().

◆ SetNetCode() [2/2]

void BOARD_CONNECTED_ITEM::SetNetCode ( int aNetCode )

inlineinherited

Definition at line 111 of file board_connected_item.h.

     {
         SetNetCode( aNetCode, false );
     }

References BOARD_CONNECTED_ITEM::SetNetCode().

◆ SetParent()

virtual void EDA_ITEM::SetParent ( EDA_ITEM * aParent )

inlinevirtualinherited

Reimplemented in DIMENSION_BASE.

Definition at line 166 of file eda_item.h.

166 { m_parent = aParent; }

EDA_ITEM::m_parent

EDA_ITEM * m_parent

Linked list: Link (parent struct)

Definition: eda_item.h:529

References EDA_ITEM::m_parent.

Referenced by FOOTPRINT::Add(), BOARD::Add(), FOOTPRINT_VIEWER_FRAME::AddFootprintToPCB(), BOARD_NETLIST_UPDATER::addNewComponent(), SCH_SHEET::AddPin(), PAD::AddPrimitive(), PAD::AddPrimitiveArc(), PAD::AddPrimitiveCircle(), PAD::AddPrimitiveCurve(), PAD::AddPrimitivePoly(), PAD::AddPrimitiveRect(), PAD::AddPrimitiveSegment(), SYMBOL_EDITOR_CONTROL::AddSymbolToSchematic(), SCH_SCREEN::Append(), LIB_FIELD::Copy(), SYMBOL_EDIT_FRAME::CreateNewPart(), SCH_DRAWING_TOOLS::createNewText(), DIALOG_PAD_PROPERTIES::DIALOG_PAD_PROPERTIES(), SCH_LINE_WIRE_BUS_TOOL::doUnfoldBus(), SCH_EDIT_TOOL::Duplicate(), PCB_EDIT_FRAME::ExchangeFootprint(), LIB_PART::Flatten(), FOOTPRINT::FOOTPRINT(), PCB_IO::FootprintSave(), DISPLAY_FOOTPRINTS_FRAME::GetFootprint(), CADSTAR_SCH_ARCHIVE_LOADER::getKiCadSchText(), LIB_PART::LIB_PART(), SCH_LEGACY_PLUGIN_CACHE::loadAliases(), FOOTPRINT_EDIT_FRAME::LoadFootprintFromBoard(), SCH_SEXPR_PLUGIN::loadHierarchy(), SCH_LEGACY_PLUGIN::loadHierarchy(), FOOTPRINT::operator=(), LIB_PART::operator=(), PCB_PARSER::parseFOOTPRINT_unchecked(), SCH_SEXPR_PARSER::ParseSchematic(), SCH_SEXPR_PARSER::ParseSymbol(), SYMBOL_EDITOR_EDIT_TOOL::Paste(), PCB_CONTROL::Paste(), SCH_EDITOR_CONTROL::Paste(), pasteFootprintItemsToFootprintEditor(), BOARD_EDITOR_CONTROL::PlaceFootprint(), BACK_ANNOTATE::processNetNameChange(), BOARD_COMMIT::Push(), SCH_SEXPR_PLUGIN_CACHE::removeSymbol(), SCH_LEGACY_PLUGIN_CACHE::removeSymbol(), PCB_BASE_EDIT_FRAME::SaveCopyInUndoList(), SaveCopyOfZones(), FOOTPRINT_EDIT_FRAME::SaveFootprintToBoard(), SCH_SHEET_PIN::SCH_SHEET_PIN(), LIB_PART::SetFields(), DIMENSION_BASE::SetParent(), SCH_DRAWING_TOOLS::SingleClickPlace(), SCH_LINE_WIRE_BUS_TOOL::startSegments(), SCH_SHEET::SwapData(), SCH_GLOBALLABEL::SwapData(), SCH_COMPONENT::SwapData(), and SwapItemData().

◆ SetParentGroup()

void BOARD_ITEM::SetParentGroup ( PCB_GROUP * aGroup )

inlineinherited

Definition at line 92 of file board_item.h.

92 { m_group = aGroup; }

BOARD_ITEM::m_group

PCB_GROUP * m_group

Definition: board_item.h:364

References BOARD_ITEM::m_group.

Referenced by PCB_GROUP::AddItem(), and PCB_GROUP::RemoveItem().

◆ SetPosition()

void TRACK::SetPosition ( const wxPoint & aPos )

inlineoverridevirtual

Reimplemented from EDA_ITEM.

Reimplemented in VIA, and ARC.

Definition at line 105 of file track.h.

105 { m_Start = aPos; }

Referenced by PANEL_EESCHEMA_COLOR_SETTINGS::createPreviewItems(), KIGFX::SCH_PAINTER::draw(), PL_SELECTION_TOOL::highlight(), EE_SELECTION_TOOL::highlight(), PCB_SELECTION_TOOL::highlightInternal(), DS_PROXY_UNDO_ITEM::Restore(), EE_TOOL_BASE< SCH_BASE_FRAME >::saveCopyInUndoList(), and GERBVIEW_SELECTION_TOOL::selectVisually().

wxPoint m_Start

Line start point.

Definition: track.h:256

References m_Start.

Referenced by PCAD2KICAD::PCB_LINE::AddToBoard(), EAGLE_PLUGIN::loadSignals(), and LEGACY_PLUGIN::loadTrackList().

◆ SetSelected()

void EDA_ITEM::SetSelected ( )

inlineinherited

Definition at line 179 of file eda_item.h.

179 { SetFlags( SELECTED ); }

EDA_ITEM::SetFlags

void SetFlags(STATUS_FLAGS aMask)

Definition: eda_item.h:203

SELECTED

#define SELECTED

Definition: eda_item.h:114

References SELECTED, and EDA_ITEM::SetFlags().

◆ SetStart()

void TRACK::SetStart ( const wxPoint & aStart )

inline

Definition at line 115 of file track.h.

115 { m_Start = aStart; }